Development December 2021

development@lists.ipfire.org

11 participants
54 discussions

Re: IPFire 2.27 - Core Update 162 is available for testing
by Adolf Belka 05 Dec '21

05 Dec '21

Hi All, I have updated to 162 testing in my vm testbed system. The update went without any hitches. After the update and reboot everything that was operating beforehand was running afterwards. I tested out my OpenVPN mobile client connection and that worked without problems, so no issues with the update to openvpn-2.5.4 I will continue reviewing the operation but first impression is that everything went very smoothly. Regards, Adolf. On 04/12/2021 14:25, IPFire Project wrote: > IPFire Logo > > there is a new post from Arne.F on the IPFire Blog: > > *IPFire 2.27 - Core Update 162 is available for testing* > > Another release is available for testing: IPFire 2.27 - Core Update 162. It comes with a brand-new kernel based on Linux 5.15, and it will be the last release supporting the i586 architecture. > > Click Here To Read More <https://blog.ipfire.org/post/ipfire-2-27-core-update-162-is-available-for-t…> > > The IPFire Project > Don't like these emails? Unsubscribe <https://people.ipfire.org/unsubscribe>. >

1 0

Patchwork now connected to people.ipfire.org
by Michael Tremer 04 Dec '21

04 Dec '21

Hello everyone, As requested at the last conference call, I have enabled LDAP authentication on Patchwork. I would like to ask people to log in and confirm that it works. If there are any problems with it, feel free to raise them here or create a bug report. Best, -Michael

2 8

[PATCH] keepalived: Update to 2.2.4
by Michael Tremer 04 Dec '21

04 Dec '21

This patch re-enables this package for build and it builds against next with Linux 5.15. Signed-off-by: Michael Tremer <michael.tremer(a)ipfire.org> --- lfs/keepalived | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/lfs/keepalived b/lfs/keepalived index 37c4d22a6..9916b5e42 100644 --- a/lfs/keepalived +++ b/lfs/keepalived @@ -24,7 +24,7 @@ include Config -VER = 2.1.5 +VER = 2.2.4 THISAPP = keepalived-$(VER) DL_FILE = $(THISAPP).tar.gz @@ -32,9 +32,7 @@ DL_FROM = $(URL_IPFIRE) DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) PROG = keepalived -PAK_VER = 9 - -SUP_ARCH = none +PAK_VER = 10 DEPS = @@ -46,7 +44,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_MD5 = 27e1cfff5b8dd95062ad415957e663e5 +$(DL_FILE)_MD5 = 7097ba70a7c6c46c9e478d16af390a19 install : $(TARGET) -- 2.30.2

1 0

[RFC PATCH] Core Update 163: Abort update.sh in case an uninitialised variable is found
by Peter Müller 04 Dec '21

04 Dec '21

This should never happen anyways, but better be safe than sorry. Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org> --- config/rootfiles/core/163/update.sh | 3 +++ 1 file changed, 3 insertions(+) diff --git a/config/rootfiles/core/163/update.sh b/config/rootfiles/core/163/update.sh index e51dbf0b3..c1f23f25e 100644 --- a/config/rootfiles/core/163/update.sh +++ b/config/rootfiles/core/163/update.sh @@ -24,6 +24,9 @@ . /opt/pakfire/lib/functions.sh /usr/local/bin/backupctrl exclude >/dev/null 2>&1 +# Abort in case of uninitialised variables +set -u + core=163 exit_with_error() { -- 2.26.2

2 1

Should I start working on Core Update 163?
by Peter Müller 03 Dec '21

03 Dec '21

Hello Arne, hello folks, since the "next" branch of IPFire 2.x landed in "master" a day ago, should I create a temporary branch for Core Update 163 and start working on this? Thanks, and best regards, Peter Müller

2 2

[RFC PATCH 1/8] AQM: Use CAKE as default qdisc where appropriate instead of fq_codel
by Michael Tremer 02 Dec '21

02 Dec '21

This script configures CAKE as default qdisc where appropriate: * It is not suitable to use any queue management on bridges/GRE/VTI/tun interfaces. * On Internet-facing interfaces, CAKE is configured in "internet" mode whereas on any zones except RED, it is configured in "metro" mode Signed-off-by: Michael Tremer <michael.tremer(a)ipfire.org> --- config/udev/enable_codel | 65 ++++++++++++++++++++++++++++++++-------- 1 file changed, 52 insertions(+), 13 deletions(-) diff --git a/config/udev/enable_codel b/config/udev/enable_codel index 6cafd9b26..3ef9b0f59 100644 --- a/config/udev/enable_codel +++ b/config/udev/enable_codel @@ -21,9 +21,9 @@ # # ############################################################################ -LOG_FACILITY="codel" +LOG_FACILITY="aqm" -function log() { +log() { logger -t "${LOG_FACILITY}" $@ } @@ -32,19 +32,58 @@ if [ -z "${INTERFACE}" ]; then exit 1 fi -# Do nothing for the loopback device. -[ "${INTERFACE}" = "lo" ] && exit 0 - case "${ACTION}" in add|register) - # Change root qdisc to use fq_codel. - /sbin/tc qdisc add root dev ${INTERFACE} fq_codel - ret=$? - - if [ ${ret} -eq 0 ]; then - log "Codel AQM has been enabled on '${INTERFACE}'." - else - log "Codel AQM could not be enabled on '${INTERFACE}'. Error code: ${ret}" + TYPE="$(</sys/class/net/${INTERFACE}/type)" + + # Detect bridges + if [ -d "/sys/class/net/${INTERFACE}/bridge" ]; then + TYPE="bridge" + fi + + args=() + + # Configure some useful defaults depending on the interface + case "${INTERFACE},${TYPE}" in + # Ignore loopback + lo,*) + exit 0 + ;; + + # Ignore tun + tun*) + exit 0 + ;; + + # Ignore GRE/VTI + *,778|*,768) + exit 0 + ;; + + # Ignore bridges + *,bridge) + exit 0 + ;; + + # Handle RED PPPoE (default to VDSL2) + ppp*,512) + args+=( "cake" "internet" "pppoe-ptm" "ack-filter" ) + ;; + + # Treat any other interfaces as "Ethernet" + red*,*) + args+=( "cake" "internet" "ethernet" ) + ;; + + # All other interfaces are locally connected + *) + args+=( "cake" "ethernet" "metro" ) + ;; + esac + + # Change root qdisc to use cake + if ! tc qdisc replace root dev "${INTERFACE}" "${args[@]}"; then + log "Could not configure qdisc on ${INTERFACE} with parameters ${args[@]}" exit ${ret} fi ;; -- 2.30.2

1 8

[PATCH] rng-tools: Update to version 6.14
by Adolf Belka 01 Dec '21

01 Dec '21

- Update from 6.12 to 6.14 - Update of rootfile not required - patch for building rng-tools also for i586 removed as 32 bit will no longer be EOL at end of 2021 - Building 6.14 caused an error for not finding librtlsdr. The same check is in the makefile in 6.12 but it does not get checked. I could not find why the check was being carried out in 6.14 - it was not due to the removal of the patch. In the end I added the --disable-rtlsdr option to configure and this allowed the build to occur without the check for the prescence of librtlsdr being carried out. - Changelog rng-tools 6.14 Bug Fixes: Fixed a null pointer deref in nistbeacon entropy source fixed some confguration tests clarified some rngd behavior in the man page update init code to do proper logging various covscan fixes fixed a memory leak in jitter entropy source fixed possible NULL deref in rdrand source various fixed in openssl mangling code added randstat binary to build minor modernizations to configure.ac rng-tools 6.13 Features: Support rndr instruction on arm Support jitter software timer on coarse time systems Bug Fixes: Merged all openssl use into a single helper library Improved console output readability Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> --- lfs/rng-tools | 10 +++--- ...g-tools-6-Enable-RDRAND-for-i586-too.patch | 35 ------------------- 2 files changed, 6 insertions(+), 39 deletions(-) delete mode 100644 src/patches/rng-tools-6-Enable-RDRAND-for-i586-too.patch diff --git a/lfs/rng-tools b/lfs/rng-tools index 4b9915f40..31706015f 100644 --- a/lfs/rng-tools +++ b/lfs/rng-tools @@ -24,7 +24,7 @@ include Config -VER = 6.12 +VER = 6.14 THISAPP = rng-tools-$(VER) DL_FILE = $(THISAPP).tar.gz @@ -40,7 +40,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_MD5 = 17f2815263b6ce6a353625b1fe615346 +$(DL_FILE)_MD5 = 917d21dd2b06816b0484e220dfb5ba4b install : $(TARGET) @@ -70,9 +70,11 @@ $(subst %,%_MD5,$(objects)) : $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) @$(PREBUILD) @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE) - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/rng-tools-6-Enable-RDRAND-for-i586-too.patch cd $(DIR_APP) && ./autogen.sh - cd $(DIR_APP) && ./configure --prefix=/usr --without-pkcs11 + cd $(DIR_APP) && ./configure \ + --prefix=/usr \ + --without-pkcs11 \ + --without-rtlsdr cd $(DIR_APP) && make $(MAKETUNING) $(EXTRA_MAKE) cd $(DIR_APP) && make $(EXTRA_INSTALL) install @rm -rf $(DIR_APP) diff --git a/src/patches/rng-tools-6-Enable-RDRAND-for-i586-too.patch b/src/patches/rng-tools-6-Enable-RDRAND-for-i586-too.patch deleted file mode 100644 index 7d45bd0b8..000000000 --- a/src/patches/rng-tools-6-Enable-RDRAND-for-i586-too.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 1f023b49959aa58246e6bb7091ba7710116f6915 Mon Sep 17 00:00:00 2001 -From: Michael Tremer <michael.tremer(a)ipfire.org> -Date: Sun, 9 Sep 2018 17:29:15 +0100 -Subject: [PATCH] Enable RDRAND for i586, too - -IPFire is being compiled for i586 omitting some instructions -for i686. However, RDRAND is available on some systems and -can of course be used. - -Signed-off-by: Michael Tremer <michael.tremer(a)ipfire.org> - -Pull request sent: https://github.com/nhorman/rng-tools/pull/31 - ---- - configure.ac | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/configure.ac b/configure.ac -index faba7cc9857e..716175328ff6 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -53,8 +53,8 @@ AC_CHECK_TOOLS([AR], [ar gar], :) - - AX_PTHREAD - --AM_CONDITIONAL([RDRAND], [test $target_cpu = x86_64 -o $target_cpu = i686]) --AS_IF([test $target_cpu = x86_64 -o $target_cpu = i686], [AC_DEFINE([HAVE_RDRAND],1,[Enable RDRAND])],[]) -+AM_CONDITIONAL([RDRAND], [test $target_cpu = x86_64 -o $target_cpu = i686 -o $target_cpu = i586]) -+AS_IF([test $target_cpu = x86_64 -o $target_cpu = i686 -o $target_cpu = i586], [AC_DEFINE([HAVE_RDRAND],1,[Enable RDRAND])],[]) - - AM_CONDITIONAL([DARN], [test $target_cpu = powerpc64le]) - AS_IF([test $target_cpu = powerpc64le], [AC_DEFINE([HAVE_DARN],1,[Enable DARN])],[]) --- -2.17.1 - -- 2.34.0

2 1

[PATCH] qemu: Update to version 6.1.0
by Adolf Belka 01 Dec '21

01 Dec '21

- Update from 5.2.0 to 6.1.0 - Update of rootfile - Removal of --no-pie patch as the changes are now built into the qemu source files - Changelog is too long to fully include here. Full details can be read at https://wiki.qemu.org/ChangeLog/ Following are the deprecated options and features from each version. 6.1.0 Using non-persistent backing file with pmem=on is now deprecated. '-display sdl,window_close=...' should be replaced with '-display sdl,window-close=...' (i.e. with a minus instead of an underscore between “window” and “close”). '-no-quit' is deprecated. '-display ...,window-close=off' should be used instead. The Aspeed swift-bmc machine is deprecated and should be replaced by the witherspoon-bmc or the romulus-bmc machines. 6.0.0 The --enable-fips option has been deprecated. Consumers wishing to have FIPS compliance must build QEMU with libcrypt and gnutls, NOT nettle. The -writeconfig option has been deprecated. The functionality of -writeconfig is limited and the code does not even try to detect cases where it prints incorrect syntax (for example if values have a quote in them). It will be removed without replacement. Boolean parameters such as share=on / share=off could be written in short form as share and noshare. This is now deprecated and will cause a warning. -chardev backend aliases tty and parport are aliases that will be removed. Instead, the actual backend names serial and parallel should be used. The delay option for socket character devices is now deprecated. Userspace local APIC with KVM (-M kernel-irqchip=off) hexadecimal sizes with scaling multipliers (e.g. 0x20M) -spice password=string is deprecated now. Use password-secret option instead. opened property of rng-* objects loaded property of secret and secret_keyring MIPS Trap-and-Emulate KVM support Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> --- config/rootfiles/packages/qemu | 1 + lfs/qemu | 7 ++- src/patches/qemu-5.2.0-no-pie.patch | 67 ----------------------------- 3 files changed, 4 insertions(+), 71 deletions(-) delete mode 100644 src/patches/qemu-5.2.0-no-pie.patch diff --git a/config/rootfiles/packages/qemu b/config/rootfiles/packages/qemu index 3792e7479..443264334 100644 --- a/config/rootfiles/packages/qemu +++ b/config/rootfiles/packages/qemu @@ -16,6 +16,7 @@ usr/bin/qemu-system-i386 usr/bin/qemu-system-riscv64 usr/bin/qemu-system-x86_64 usr/bin/qemu-x86_64 +usr/include/qemu-plugin.h usr/libexec/qemu-bridge-helper usr/libexec/virtiofsd #usr/share/applications/qemu.desktop diff --git a/lfs/qemu b/lfs/qemu index 689dba96d..b15fe985a 100644 --- a/lfs/qemu +++ b/lfs/qemu @@ -24,7 +24,7 @@ include Config -VER = 5.2.0 +VER = 6.1.0 THISAPP = qemu-$(VER) DL_FILE = $(THISAPP).tar.xz @@ -33,7 +33,7 @@ DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) SUP_ARCH = i586 x86_64 PROG = qemu -PAK_VER = 30 +PAK_VER = 31 DEPS = libusbredir spice libseccomp @@ -55,7 +55,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_MD5 = 179f86928835da857c237b42f4b2df73 +$(DL_FILE)_MD5 = 47f776c276a24f42108ba512a2aa3013 install : $(TARGET) @@ -88,7 +88,6 @@ $(subst %,%_MD5,$(objects)) : $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) @$(PREBUILD) @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE) - cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/qemu-5.2.0-no-pie.patch cd $(DIR_APP) && ./configure \ --prefix=/usr \ --sysconfdir=/etc \ diff --git a/src/patches/qemu-5.2.0-no-pie.patch b/src/patches/qemu-5.2.0-no-pie.patch deleted file mode 100644 index 8f3f4d590..000000000 --- a/src/patches/qemu-5.2.0-no-pie.patch +++ /dev/null @@ -1,67 +0,0 @@ -Recent binutils changes dropping unsupported options [1] caused a build -issue in regard to the optionroms. - - ld -m elf_i386 -T /<<PKGBUILDDIR>>/pc-bios/optionrom//flat.lds -no-pie \ - -s -o multiboot.img multiboot.o - ld.bfd: Error: unable to disambiguate: -no-pie (did you mean --no-pie ?) - -This isn't really a regression in ld.bfd, filing the bug upstream -revealed that this never worked as a ld flag [2] - in fact it seems we -were by accident setting --nmagic). - -Since it never had the wanted effect this usage of LDFLAGS_NOPIE, should be -droppable without any effect. This also is the only use-case of LDFLAGS_NOPIE -in .mak, therefore we can also remove it from being added there. - -[1]: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=983d925d -[2]: https://sourceware.org/bugzilla/show_bug.cgi?id=27050#c5 - -Signed-off-by: Christian Ehrhardt <christian.ehrhardt(a)canonical.com> ---- - configure | 3 --- - pc-bios/optionrom/Makefile | 1 - - 2 files changed, 4 deletions(-) - -diff --git a/configure b/configure -index 3f823ed163..61c17c2dde 100755 ---- a/configure -+++ b/configure -@@ -2133,7 +2133,6 @@ EOF - # Check we support --no-pie first; we will need this for building ROMs. - if compile_prog "-Werror -fno-pie" "-no-pie"; then - CFLAGS_NOPIE="-fno-pie" -- LDFLAGS_NOPIE="-no-pie" - fi - - if test "$static" = "yes"; then -@@ -2149,7 +2148,6 @@ if test "$static" = "yes"; then - fi - elif test "$pie" = "no"; then - CONFIGURE_CFLAGS="$CFLAGS_NOPIE $CONFIGURE_CFLAGS" -- CONFIGURE_LDFLAGS="$LDFLAGS_NOPIE $CONFIGURE_LDFLAGS" - elif compile_prog "-Werror -fPIE -DPIE" "-pie"; then - CONFIGURE_CFLAGS="-fPIE -DPIE $CONFIGURE_CFLAGS" - CONFIGURE_LDFLAGS="-pie $CONFIGURE_LDFLAGS" -@@ -6768,7 +6766,6 @@ echo "QEMU_CXXFLAGS=$QEMU_CXXFLAGS" >> $config_host_mak - echo "GLIB_CFLAGS=$glib_cflags" >> $config_host_mak - echo "GLIB_LIBS=$glib_libs" >> $config_host_mak - echo "QEMU_LDFLAGS=$QEMU_LDFLAGS" >> $config_host_mak --echo "LDFLAGS_NOPIE=$LDFLAGS_NOPIE" >> $config_host_mak - echo "LD_I386_EMULATION=$ld_i386_emulation" >> $config_host_mak - echo "EXESUF=$EXESUF" >> $config_host_mak - echo "HOST_DSOSUF=$HOST_DSOSUF" >> $config_host_mak -diff --git a/pc-bios/optionrom/Makefile b/pc-bios/optionrom/Makefile -index 084fc10f05..30771f8d17 100644 ---- a/pc-bios/optionrom/Makefile -+++ b/pc-bios/optionrom/Makefile -@@ -41,7 +41,6 @@ override CFLAGS += $(call cc-option, $(Wa)-32) - - LD_I386_EMULATION ?= elf_i386 - override LDFLAGS = -m $(LD_I386_EMULATION) -T $(SRC_DIR)/flat.lds --override LDFLAGS += $(LDFLAGS_NOPIE) - - all: multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin pvh.bin - --- -2.29.2 - -- 2.34.0

2 1

[PATCH] sdparm: Update version to 1.12
by Adolf Belka 01 Dec '21

01 Dec '21

- Update from 1.10 to 1.12 - Update of rootfile not required - Changelog sdparm-1.12 [20210421] [svn: r347] - add Command duration limits T2A and T2B mpages - add Sequestered command fields in Control extension mpage - SAS/SPL disconnect-reconnect mpage: BILUNIT and CTLUNIT fields added (21-021r3) - vpd: SCSI Feature Sets [0x92]: add ZBC feature sets - add SAT ATA Feature control mpage (20-085r4) - block device char vpd page: add zoned strings - expand Out of band management control mpage (spl5r08) - vpd: add Format presets and Concurrent positioning ranges pages - vpd: standard inquiry: add hot_pluggable field - sg_lib: allows access to cache mpage's WCE for nvme - start using autoconf 2.70 - point svn:externals to sg3_utils release 1.46 (rev 891) sdparm-1.11 [20200303] [svn: r334] - Allow ZBC mode pages to use existing SBC mpages as permitted by zbc2r04 chapter 6.4.1 table 70 - add --out_mask=OM option for mode page control bitmask (current, changeable, default and/or saveable) - add --examine option to iterate over mode+vpd pages - add Out of band management control mpage (spl5r01) - expand SAS configure port mode page [0x19,0x2] with configure port mode fields (spl5r07) - accept additional transport acronyms (e.g. ib for srp) - power condition mpage: rename fields IDLE->IDLE_A; STANDBY->STANDBY_Z; ICT->IACT and SCT->SZCT - device configuration extension mpage: expand PEWS field with added PE_UN (PEWS units) field (ssc5r05) - add Zoned block device control mpage (zbc2r04a) - --defaults option can be used twice: reverts all pages to their defaults (new in spc5r11, RTD bit) - vpd: decode TransportIDs in SCSI port page - --all option used twice lists all VPD pages - decode SCSI Feature sets page (spc5r16) - extended inquiry data, sync with spc5r09 + sbc4r11 - 3 party copy page improvements including Copy group identifier - block limits and block limit extension VPD pages: add extra info about corner cases - add maximum inquiry|mode_page change logs fields to extended inquiry vpd page (spc5r17) - fully implement Device constituents VPD page - command=capacity with --long force read capacity(16) with full reporting of response - --wscan option: expand bus type to include NVMe - mode page output with -HHH suitable for --inhex= - add flexible geometery page (obsolete) sbc2r00 - point svn:externals to rev 843 of sg3_utils [v 1.45] - convert many two valued 'int's to bool - shellcheck corrections on scripts - upgrade automake to version 1.15 (U16.04) - rework configure.ac and src/Makefile.am - add --enable-debug to ./configure - update BSD license from 3 to 2 clause aka FreeBSD license (without reference to FreeBSD project) - debian: bump compat file contents from 7 to 10 Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> --- lfs/sdparm | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lfs/sdparm b/lfs/sdparm index 2395b8275..f6fb52db0 100644 --- a/lfs/sdparm +++ b/lfs/sdparm @@ -24,7 +24,7 @@ include Config -VER = 1.10 +VER = 1.12 THISAPP = sdparm-$(VER) DL_FILE = $(THISAPP).tgz @@ -40,7 +40,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_MD5 = bdae64375376ce8fe4bf9521c1db858f +$(DL_FILE)_MD5 = 2902fd29e6834fd62c16bb5d1ac53c7e install : $(TARGET) -- 2.34.0

2 1

[PATCH] socat: Update to version 1.7.4.2
by Adolf Belka 01 Dec '21

01 Dec '21

- Update from 1.7.3.4 to 1.7.4.2 - Update fo rootfile not required - Changelog is too long to include here. Full details can be found in the CHANGES file in the source tarball. Following is summary notes for each release from website 1.7.4.2 fixes a lot of bugs, e.g., for options -r and -R. 1.7.4.1 fixes compilation on 32 bit systems and file transfer with OpenSSL. 1.7.4.0 fixes a couple of bugs including a very theoretical security issue, restauration of DTLS using UDP, some porting issues, and last but not least several new features: VSOCK support, OpenSSL SNI, raw data dump, and more. Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org> --- lfs/socat | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/lfs/socat b/lfs/socat index 7b001e9d1..a6d58118c 100644 --- a/lfs/socat +++ b/lfs/socat @@ -25,7 +25,7 @@ include Config -VER = 1.7.3.4 +VER = 1.7.4.2 THISAPP = socat-$(VER) DL_FILE = $(THISAPP).tar.gz @@ -33,7 +33,7 @@ DL_FROM = $(URL_IPFIRE) DIR_APP = $(DIR_SRC)/$(THISAPP) TARGET = $(DIR_INFO)/$(THISAPP) PROG = socat -PAK_VER = 1 +PAK_VER = 2 DEPS = @@ -45,7 +45,7 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_MD5 = c9e71d0136c88a01d6fd30a13a3936ed +$(DL_FILE)_MD5 = 7f139e6caa1234640dfb4ef13f4c1417 install : $(TARGET) -- 2.34.0

2 1

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

Development December 2021