From: Michael Tremer <michael.tremer@ipfire.org>
To: development@lists.ipfire.org
Subject: Re: [FAILED] Nightly Build of next (afd2a2a) for armv6l on arm64-01.zrh.ipfire.org
Date: Mon, 21 Nov 2022 11:30:25 +0000 [thread overview]
Message-ID: <03577407-69E5-403A-9078-B634C183A649@ipfire.org> (raw)
In-Reply-To: <094361c1-7dc3-ffd0-3a3e-551f5505648a@ipfire.org>
[-- Attachment #1: Type: text/plain, Size: 66055 bytes --]
Hello Adolf,
> On 19 Nov 2022, at 22:08, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>
> Hi Peter,
>
> On 19/11/2022 21:33, Peter Müller wrote:
>> Hello *,
>>
>> ever since merging the Python 3.10 patchset, the nightly builds on 32-bit ARM crash
>> due to some files missing the builder expects to be present. Since file names containing
>> architecture prefixes do not read "xxxMACHINExxx-linux-gnu" on 32-bit ARM, but
>> "arm-linux-gnueabi", such quirks are rather familiar, and usually easy to fix by updating
>> the affected rootfiles.
>>
>> This time, however, I struggle finding the root cause: Searching for "_testcapi" in
>> all rootfiles returns this:
>>
>> $ grep -r "_testcapi" config/rootfiles/
>> config/rootfiles/common/armv6l/python3:usr/lib/python3.10/lib-dynload/_testcapi.cpython-310-arm-linux-gnueabi.so
>> config/rootfiles/common/python3:usr/lib/python3.10/lib-dynload/_testcapi.cpython-310-xxxMACHINExxx-linux-gnu.so
>
> I definitely didn't do a very good job with the python update patch set. My apologies for that.
Rootfiles are a bitch and the armv6l rootfiles are even worse. Luckily they won’t be around for too much longer.
> The line in question refers to cpython. With the pyfuse3 package update being properly cythonised the python3-Cython package was removed. I have the suspicion that this line is related to that Cython aspect as looking back through previous CU's it was only present in python3 when python3-Cython was present.
>
> So the line probably should be removed from the rootfile is my conclusion, although I am not 100% certain on that.
>
> Sorry for causing all the hassles.
>
> Regards,
>
> Adolf.
>
>> Based on this output, I would have expected the 32-bit ARM builder to use the armv6l rootfile
>> rather than the generic one - just as it did before. However,
>>
>> tar: usr/lib/python3.10/lib-dynload/_testcapi.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>> ^^^^^^ ^^^^^^
>>
>> reads like I am mistaken.
>>
>> Has anything changed on that front? Am I overlooking something?
>>
>> Thanks, and best regards,
>> Peter Müller
>>
>>
>>> https://nightly.ipfire.org/next/2022-11-18%2019%3A55%3A41%20%2B0000-afd2a2a7/armv6l
>>>
>>> commit afd2a2a7b143ecf69bc7cda9b54199caadc4f7d4
>>> Author: Robin Roevens <robin.roevens(a)disroot.org>
>>> Date: Fri Nov 18 16:42:34 2022 +0100
>>>
>>> Rename misleading "check filesystem" reboot option NL translation
>>> Some users assume that "check filesystem" does more than just
>>> trigger a simple "fsck" run. This patch changes the button label to avoid
>>> confusion. - NL translation
>>> Signed-off-by: Robin Roevens <robin.roevens(a)disroot.org>
>>>
>>> https://git.ipfire.org/?p=ipfire-2.x.git;a=shortlog;h=afd2a2a7b143ecf69bc7cda9b54199caadc4f7d4
>>>
>>> Packaged toolchain compilation
>>> Checking for necessary space on disk [ DONE ]
>>> Set cache size limit to 4.0 GB
>>> Building LFS
>>> stage2 [ 1 ][ DONE ]
>>> linux (5.15.71) KCFG=-headers [ 22 ][ DONE ]
>>> man-pages (5.13) [ 7 ][ DONE ]
>>> glibc (2.36) [ 4:50 ][ DONE ]
>>> tzdata (2022e) [ 3 ][ DONE ]
>>> cleanup-toolchain [ 0 ][ DONE ]
>>> zlib (1.2.13) [ 1 ][ DONE ]
>>> zstd (1.5.2) [ 2 ][ DONE ]
>>> autoconf (2.71) [ 2 ][ DONE ]
>>> automake (1.16.3) [ 3 ][ DONE ]
>>> libtool (2.4.6) [ 6 ][ DONE ]
>>> binutils (2.39) [ 37 ][ DONE ]
>>> gmp (6.2.1) [ 29 ][ DONE ]
>>> mpfr (4.1.0) [ 15 ][ DONE ]
>>> libmpc (1.2.1) [ 5 ][ DONE ]
>>> libxcrypt (4.4.28) [ 11 ][ DONE ]
>>> file (5.40) [ 8 ][ DONE ]
>>> gcc (11.3.0) [ 5:38 ][ DONE ]
>>> attr (2.5.1) [ 6 ][ DONE ]
>>> acl (2.3.1) [ 9 ][ DONE ]
>>> sed (4.8) [ 25 ][ DONE ]
>>> berkeley (5.3.28) [ 24 ][ DONE ]
>>> coreutils (9.0) [ 2:02 ][ DONE ]
>>> iana-etc (20220414) [ 0 ][ DONE ]
>>> m4 (1.4.19) [ 33 ][ DONE ]
>>> bison (3.8.2) [ 31 ][ DONE ]
>>> ncurses (6.3) [ 27 ][ DONE ]
>>> perl (5.36.0) [ 2:09 ][ DONE ]
>>> readline (8.1) [ 7 ][ DONE ]
>>> bzip2 (1.0.8) [ 1 ][ DONE ]
>>> xz (5.2.5) [ 10 ][ DONE ]
>>> lzip (1.23) [ 1 ][ DONE ]
>>> pcre (8.45) [ 8 ][ DONE ]
>>> pcre2 (10.40) [ 6 ][ DONE ]
>>> gettext (0.21) [ 2:34 ][ DONE ]
>>> bash (5.1.16) [ 31 ][ DONE ]
>>> diffutils (3.8) [ 26 ][ DONE ]
>>> ed (1.17) [ 0 ][ DONE ]
>>> findutils (4.9.0) [ 40 ][ DONE ]
>>> flex (2.6.4) [ 8 ][ DONE ]
>>> gawk (5.1.1) [ 14 ][ DONE ]
>>> go (1.15.4) [ 0 ][ SKIP ]
>>> grep (3.7) [ 27 ][ DONE ]
>>> groff (1.22.4) [ 36 ][ DONE ]
>>> gperf (3.1) [ 2 ][ DONE ]
>>> gzip (1.12) [ 17 ][ DONE ]
>>> hostname (3.20) [ 0 ][ DONE ]
>>> whois (5.5.13) [ 0 ][ DONE ]
>>> kbd (2.5.1) [ 14 ][ DONE ]
>>> less (590) [ 5 ][ DONE ]
>>> pkg-config (0.29.2) [ 24 ][ DONE ]
>>> procps (v4.0.0) [ 15 ][ DONE ]
>>> make (4.3) [ 16 ][ DONE ]
>>> libpipeline (1.5.6) [ 18 ][ DONE ]
>>> man (2.10.2) [ 48 ][ DONE ]
>>> net-tools (2.10) [ 1 ][ DONE ]
>>> patch (2.7.6) [ 22 ][ DONE ]
>>> psmisc (23.4) [ 6 ][ DONE ]
>>> shadow (4.11.1) [ 15 ][ DONE ]
>>> sysklogd (1.5.1) [ 0 ][ DONE ]
>>> sysvinit (3.00) [ 1 ][ DONE ]
>>> tar (1.34) [ 34 ][ DONE ]
>>> texinfo (6.8) [ 26 ][ DONE ]
>>> util-linux (2.38.1) [ 29 ][ DONE ]
>>> vim (9.0) [ 19 ][ DONE ]
>>> e2fsprogs (1.46.5) [ 14 ][ DONE ]
>>> jq (1.6) [ 12 ][ DONE ]
>>> Building IPFire
>>> configroot [ 1 ][ DONE ]
>>> initscripts [ 1 ][ DONE ]
>>> backup [ 0 ][ DONE ]
>>> rust (2022-01-27) [ 17 ][ DONE ]
>>> openssl (1.1.1q) [ 1:28 ][ DONE ]
>>> kmod (30) [ 7 ][ DONE ]
>>> udev (3.2.11) [ 13 ][ DONE ]
>>> popt (1.18) [ 5 ][ DONE ]
>>> libedit (20210910-3.1) [ 7 ][ DONE ]
>>> libusb (1.0.25) [ 5 ][ DONE ]
>>> libpcap (1.10.1) [ 6 ][ DONE ]
>>> ppp (2.4.9) [ 2 ][ DONE ]
>>> pptp (1.10.0) [ 0 ][ DONE ]
>>> unzip (60) [ 1 ][ DONE ]
>>> which (2.21) [ 3 ][ DONE ]
>>> linux-firmware (20220913) [ 27 ][ DONE ]
>>> dvb-firmwares (20141125) [ 0 ][ DONE ]
>>> xr819-firmware (c01.08.0043) [ 1 ][ DONE ]
>>> zd1211-firmware (1.5) [ 0 ][ DONE ]
>>> rpi-firmware (20211127) [ 0 ][ DONE ]
>>> intel-microcode (20220809) [ 0 ][ SKIP ]
>>> pcengines-apu-firmware (4.17.0.1) [ 0 ][ SKIP ]
>>> bc (1.07.1) [ 4 ][ DONE ]
>>> u-boot (2021.07) MKIMAGE=1 [ 8 ][ DONE ]
>>> cpio (2.13) [ 39 ][ DONE ]
>>> mdadm (4.2) [ 0 ][ DONE ]
>>> dracut (056) [ 2 ][ DONE ]
>>> libaio (0.3.113) [ 0 ][ DONE ]
>>> lvm2 (2.02.188) [ 15 ][ DONE ]
>>> multipath-tools (0.8.9) [ 1 ][ DONE ]
>>> freetype (2.12.1) [ 5 ][ DONE ]
>>> libmnl (1.0.5) [ 3 ][ DONE ]
>>> libnfnetlink (1.0.2) [ 3 ][ DONE ]
>>> libnetfilter_queue (1.0.5) [ 3 ][ DONE ]
>>> libnetfilter_conntrack (1.0.8) [ 4 ][ DONE ]
>>> libnetfilter_cthelper (1.0.1) [ 3 ][ DONE ]
>>> libnetfilter_cttimeout (1.0.1) [ 3 ][ DONE ]
>>> iptables (1.8.8) [ 7 ][ DONE ]
>>> iproute2 (5.19.0) [ 3 ][ DONE ]
>>> screen (4.9.0) [ 9 ][ DONE ]
>>> elfutils (0.187) [ 12 ][ DONE ]
>>> linux (5.15.71) KCFG= [ 7:23 ][ DONE ]
>>> rtl8189es (03ac413135a355b55b693154c44b70f86a39732e) KCFG= [ 4 ][ DONE ]
>>> rtl8189fs (3129a665f835ce0342f9a85a0ce14a556e656b8c) KCFG= [ 3 ][ DONE ]
>>> rtl8812au (307d694076b056588c652c2bdaa543a89eb255d9) KCFG= [ 4 ][ DONE ]
>>> rtl8822bu (fd0b735e2e30d32f4d91497242cf6af288bdd082) KCFG= [ 7 ][ DONE ]
>>> rtl8821cu (20210118-f91ddf3cc7555b9a1c27c90f23764cfc0b1b6f9c) KCFG= [ 8 ][ DONE ]
>>> xradio (354e8c32e7948d46a63796d0ca266b1f702999b0) KCFG= [ 1 ][ DONE ]
>>> linux-initrd ($(KVER)) KCFG= [ 14 ][ DONE ]
>>> libgpg-error (1.44) [ 13 ][ DONE ]
>>> libgcrypt (1.10.1) [ 15 ][ DONE ]
>>> libassuan (2.5.4) [ 8 ][ DONE ]
>>> nettle (3.8.1) [ 11 ][ DONE ]
>>> libsodium (1.0.18) [ 25 ][ DONE ]
>>> json-c (0.13.1) [ 6 ][ DONE ]
>>> libconfig (1.7.2) [ 15 ][ DONE ]
>>> libevent2 (2.1.12-stable) [ 13 ][ DONE ]
>>> expat (2.5.0) [ 6 ][ DONE ]
>>> apr (1.7.0) [ 23 ][ DONE ]
>>> aprutil (1.6.1) [ 5 ][ DONE ]
>>> unbound (1.17.0) [ 23 ][ DONE ]
>>> gnutls (3.7.7) [ 1:01 ][ DONE ]
>>> libuv (1.42.0) [ 13 ][ DONE ]
>>> bind (9.16.35) [ 1:56 ][ DONE ]
>>> dhcp (4.4.3-P1) [ 24 ][ DONE ]
>>> dhcpcd (9.4.1) [ 2 ][ DONE ]
>>> boost (1_76_0) [ 2:09 ][ DONE ]
>>> linux-atm (2.4.1) [ 10 ][ DONE ]
>>> gdbm (1.23) [ 12 ][ DONE ]
>>> pam (1.5.2) [ 37 ][ DONE ]
>>> c-ares (1.17.1) [ 26 ][ DONE ]
>>> curl (7.84.0) [ 29 ][ DONE ]
>>> tcl (8.6.12) [ 29 ][ DONE ]
>>> sqlite (3390200) [ 4 ][ DONE ]
>>> libffi (3.4.2) [ 6 ][ DONE ]
>>> python3 (3.10.8) [ 56 ][ DONE ]
>>> rust (2022-01-27) [ 0 ][ DONE ]
>>> rust-dissimilar (1.0.3) [ 5 ][ DONE ]
>>> rust-cfg-if (1.0.0) [ 0 ][ DONE ]
>>> rust-libc (0.2.108) [ 4 ][ DONE ]
>>> rust-getrandom (0.2.4) [ 4 ][ DONE ]
>>> rust-typenum (1.15.0) [ 4 ][ DONE ]
>>> rust-version-check (0.9.4) [ 3 ][ DONE ]
>>> rust-generic-array (0.14.4) [ 5 ][ DONE ]
>>> rust-cipher (0.3.0) [ 6 ][ DONE ]
>>> rust-hex (0.4.3) [ 1 ][ DONE ]
>>> rust-unicode-xid (0.2.1) [ 1 ][ DONE ]
>>> rust-proc-macro2 (1.0.36) [ 6 ][ DONE ]
>>> rust-quote (1.0.15) [ 7 ][ DONE ]
>>> rust-syn (1.0.86) [ 27 ][ DONE ]
>>> rust-home (0.5.3) [ 1 ][ DONE ]
>>> rust-lazy-static (1.4.0) [ 1 ][ DONE ]
>>> rust-memchr (2.4.1) [ 3 ][ DONE ]
>>> rust-aho-corasick (0.7.18) [ 7 ][ DONE ]
>>> rust-regex-syntax (0.6.25) [ 18 ][ DONE ]
>>> rust-regex (1.5.3) [ 38 ][ DONE ]
>>> rust-ucd-trie (0.1.3) [ 2 ][ DONE ]
>>> rust-pest (2.1.3) [ 3 ][ DONE ]
>>> rust-semver-parser (0.7.0) [ 2 ][ DONE ]
>>> rust-semver (0.9.0) [ 3 ][ DONE ]
>>> rust-same-file (1.0.6) [ 1 ][ DONE ]
>>> rust-walkdir (2.3.2) [ 3 ][ DONE ]
>>> rust-dirs (1.0.5) [ 3 ][ DONE ]
>>> rust-toolchain_find (0.1.4) [ 31 ][ DONE ]
>>> rust-serde (1.0.136) [ 9 ][ DONE ]
>>> rust-itoa (1.0.1) [ 1 ][ DONE ]
>>> rust-ryu (1.0.9) [ 1 ][ DONE ]
>>> rust-serde_json (1.0.78) [ 15 ][ DONE ]
>>> rust-synstructure (0.12.6) [ 33 ][ DONE ]
>>> rust-block-buffer (0.9.0) [ 5 ][ DONE ]
>>> rust-crypto-common (0.1.1) [ 6 ][ DONE ]
>>> rust-digest (0.9.0) [ 5 ][ DONE ]
>>> rust-ppv-lite86 (0.2.16) [ 1 ][ DONE ]
>>> rust-rand_core (0.6.3) [ 1 ][ DONE ]
>>> rust-rand_core-0.4.2 (0.4.2) [ 1 ][ DONE ]
>>> rust-rand_core-0.3.1 (0.3.1) [ 1 ][ DONE ]
>>> rust-rand_chacha (0.3.1) [ 6 ][ DONE ]
>>> rust-rand_hc (0.3.1) [ 1 ][ DONE ]
>>> rust-rand (0.8.4) [ 9 ][ DONE ]
>>> rust-rdrand (0.4.0) [ 1 ][ DONE ]
>>> rust-rand-0.4 (0.4.6) [ 6 ][ DONE ]
>>> rust-log (0.4.14) [ 2 ][ DONE ]
>>> rust-num_cpus (1.13.1) [ 5 ][ DONE ]
>>> rust-crossbeam-utils (0.8.6) [ 2 ][ DONE ]
>>> rust-autocfg (1.0.1) [ 3 ][ DONE ]
>>> rust-memoffset (0.6.5) [ 3 ][ DONE ]
>>> rust-scopeguard (1.1.0) [ 1 ][ DONE ]
>>> rust-crossbeam-epoch (0.9.6) [ 5 ][ DONE ]
>>> rust-crossbeam-deque (0.8.1) [ 5 ][ DONE ]
>>> rust-either (1.6.1) [ 1 ][ DONE ]
>>> rust-crossbeam-channel (0.5.2) [ 3 ][ DONE ]
>>> rust-rayon-core (1.9.1) [ 9 ][ DONE ]
>>> rust-rayon (1.5.1) [ 12 ][ DONE ]
>>> rust-remove_dir_all (0.5.3) [ 1 ][ DONE ]
>>> rust-tempdir (0.3.7) [ 5 ][ DONE ]
>>> rust-glob (0.3.0) [ 4 ][ DONE ]
>>> rust-once_cell (1.9.0) [ 1 ][ DONE ]
>>> rust-termcolor (1.1.2) [ 2 ][ DONE ]
>>> rust-toml (0.5.8) [ 20 ][ DONE ]
>>> rust-serde_derive (1.0.136) [ 1:00 ][ DONE ]
>>> rust-trybuild (1.0.54) [ 1:56 ][ DONE ]
>>> rust-unindent (0.1.7) [ 2 ][ DONE ]
>>> rust-proc-macro-hack (0.5.19) [ 6 ][ DONE ]
>>> rust-indoc-impl (0.3.6) [ 31 ][ DONE ]
>>> rust-indoc (1.0.3) [ 3 ][ DONE ]
>>> rust-indoc-0.3.6 (0.3.6) [ 31 ][ DONE ]
>>> rust-instant (0.1.12) [ 0 ][ DONE ]
>>> rust-lock_api (0.4.5) [ 2 ][ DONE ]
>>> rust-smallvec (1.8.0) [ 1 ][ DONE ]
>>> rust-parking_lot_core (0.8.5) [ 4 ][ DONE ]
>>> rust-parking_lot (0.11.2) [ 6 ][ DONE ]
>>> rust-paste-impl (0.1.18) [ 9 ][ DONE ]
>>> rust-paste (1.0.3) [ 4 ][ DONE ]
>>> rust-paste-0.1.18 (0.1.18) [ 9 ][ DONE ]
>>> rust-ctor (0.1.21) [ 49 ][ DONE ]
>>> rust-ghost (0.1.2) [ 33 ][ DONE ]
>>> rust-inventory-impl (0.1.4) [ 29 ][ DONE ]
>>> rust-inventory (0.1.4) [ 1:00 ][ DONE ]
>>> rust-pyo3-build-config (0.15.2) [ 13 ][ DONE ]
>>> rust-pyo3-macros-backend (0.15.2) [ 1:03 ][ DONE ]
>>> rust-pyo3-macros (0.15.2) [ 1:10 ][ DONE ]
>>> rust-pyo3 (0.15.2) [ 1:35 ][ DONE ]
>>> rust-num-traits (0.2.15) [ 6 ][ DONE ]
>>> rust-num-integer (0.1.45) [ 6 ][ DONE ]
>>> rust-num_threads (0.1.5) [ 2 ][ DONE ]
>>> rust-time (0.1.43) [ 5 ][ DONE ]
>>> rust-iana-time-zone (0.1.51) [ 1 ][ DONE ]
>>> rust-chrono (0.4.22) [ 15 ][ DONE ]
>>> rust-asn1_derive (0.12.2) [ 38 ][ DONE ]
>>> rust-asn1 (0.12.2) [ 42 ][ DONE ]
>>> rust-proc-macro-error-attr (1.0.4) [ 9 ][ DONE ]
>>> rust-proc-macro-error (1.0.4) [ 15 ][ DONE ]
>>> rust-Inflector (0.11.4) [ 29 ][ DONE ]
>>> rust-ouroboros_macro (0.15.5) [ 1:07 ][ DONE ]
>>> rust-aliasable (0.1.3) [ 1 ][ DONE ]
>>> rust-stable_deref_trait (1.2.0) [ 1 ][ DONE ]
>>> rust-ouroboros (0.15.5) [ 1:08 ][ DONE ]
>>> rust-base64 (0.13.0) [ 1 ][ DONE ]
>>> rust-pem (1.1.0) [ 3 ][ DONE ]
>>> gdb (12.1) [ 1:01 ][ DONE ]
>>> grub (2.06) [ 0 ][ SKIP ]
>>> mandoc (1.14.6) [ 4 ][ DONE ]
>>> efivar (38) [ 0 ][ SKIP ]
>>> efibootmgr (18) [ 0 ][ SKIP ]
>>> libtasn1 (4.18.0) [ 14 ][ DONE ]
>>> p11-kit (0.24.1) [ 15 ][ DONE ]
>>> ca-certificates (20220917) [ 3 ][ DONE ]
>>> fireinfo (2.2.0) [ 9 ][ DONE ]
>>> libnet (1.1.6) [ 7 ][ DONE ]
>>> libnl-3 (3.5.0) [ 17 ][ DONE ]
>>> libidn (1.38) [ 16 ][ DONE ]
>>> nasm (2.15.05) [ 11 ][ DONE ]
>>> libarchive (3.6.1) [ 28 ][ DONE ]
>>> cmake (3.21.0) [ 30 ][ DONE ]
>>> ninja (1.11.0) [ 3 ][ DONE ]
>>> meson (0.62.1) [ 3 ][ DONE ]
>>> libjpeg (2.0.4) [ 3 ][ DONE ]
>>> openjpeg (2.4.0) [ 3 ][ DONE ]
>>> libexif (0.6.22) [ 5 ][ DONE ]
>>> libpng (1.6.37) [ 5 ][ DONE ]
>>> libtiff (4.3.0) [ 12 ][ DONE ]
>>> gd (2.3.3) [ 6 ][ DONE ]
>>> slang (2.3.2) [ 19 ][ DONE ]
>>> newt (0.52.21) [ 3 ][ DONE ]
>>> libsmooth [ 8 ][ DONE ]
>>> libcap (2.64) [ 2 ][ DONE ]
>>> libcap-ng (0.8.3) [ 5 ][ DONE ]
>>> pciutils (3.8.0) [ 1 ][ DONE ]
>>> usbutils (014) [ 13 ][ DONE ]
>>> libxml2 (2.10.3) [ 7 ][ DONE ]
>>> libxslt (1.1.35) [ 9 ][ DONE ]
>>> perl-BerkeleyDB (0.63) [ 1 ][ DONE ]
>>> cyrus-sasl (2.1.26) [ 19 ][ DONE ]
>>> openldap (2.6.1) [ 44 ][ DONE ]
>>> apache2 (2.4.54) [ 34 ][ DONE ]
>>> web-user-interface [ 2 ][ DONE ]
>>> flag-icons (2.6) [ 1 ][ DONE ]
>>> jquery (3.6.0) [ 1 ][ DONE ]
>>> bootstrap (4.0.0-alpha.6) [ 0 ][ DONE ]
>>> arping (2.21) [ 6 ][ DONE ]
>>> beep (1.3) [ 1 ][ DONE ]
>>> libssh (0.9.6) [ 9 ][ DONE ]
>>> libinih (r55) [ 3 ][ DONE ]
>>> cdrkit (1.1.11) [ 6 ][ DONE ]
>>> dosfstools (4.2) [ 3 ][ DONE ]
>>> exfatprogs (1.1.3) [ 4 ][ DONE ]
>>> reiserfsprogs (3.6.27) [ 11 ][ DONE ]
>>> liburcu (0.13.0) [ 14 ][ DONE ]
>>> xfsprogs (5.18.0) [ 37 ][ DONE ]
>>> sysfsutils (2.1.1) [ 10 ][ DONE ]
>>> fuse (3.11.0) [ 3 ][ DONE ]
>>> ntfs-3g (2021.8.22) [ 11 ][ DONE ]
>>> ethtool (5.16) [ 3 ][ DONE ]
>>> fcron (3.2.1) [ 10 ][ DONE ]
>>> perl-ExtUtils-PkgConfig (1.16) [ 0 ][ DONE ]
>>> perl-GD (2.73) [ 2 ][ DONE ]
>>> perl-GD-Graph (1.54) [ 1 ][ DONE ]
>>> perl-GD-TextUtil (0.86) [ 1 ][ DONE ]
>>> perl-Device-SerialPort (1.000002) [ 7 ][ DONE ]
>>> perl-Device-Modem (1.56) [ 1 ][ DONE ]
>>> perl-Apache-Htpasswd (1.9) [ 1 ][ DONE ]
>>> perl-Parse-Yapp (1.21) [ 1 ][ DONE ]
>>> perl-Data-UUID (1.224) [ 2 ][ DONE ]
>>> perl-Try-Tiny (0.31) [ 1 ][ DONE ]
>>> perl-HTTP-Message (6.36) [ 1 ][ DONE ]
>>> perl-HTTP-Date (6.05) [ 1 ][ DONE ]
>>> gnupg (1.4.23) [ 17 ][ DONE ]
>>> hdparm (9.64) [ 0 ][ DONE ]
>>> whatmask (1.2) [ 3 ][ DONE ]
>>> libtirpc (1.3.1) [ 6 ][ DONE ]
>>> conntrack-tools (1.4.6) [ 9 ][ DONE ]
>>> iputils (20210202) [ 4 ][ DONE ]
>>> l7-protocols (2009-05-10) [ 1 ][ DONE ]
>>> hwdata [ 0 ][ DONE ]
>>> logrotate (3.20.1) [ 5 ][ DONE ]
>>> logwatch (7.7) [ 1 ][ DONE ]
>>> misc-progs [ 3 ][ DONE ]
>>> nano (6.4) [ 21 ][ DONE ]
>>> perl-URI (5.09) [ 1 ][ DONE ]
>>> perl-CGI (4.54) [ 1 ][ DONE ]
>>> perl-Switch (2.17) [ 1 ][ DONE ]
>>> perl-HTML-Tagset (3.04) [ 1 ][ DONE ]
>>> perl-HTML-Parser (3.45) [ 1 ][ DONE ]
>>> perl-HTML-Template (2.94) [ 1 ][ DONE ]
>>> perl-Compress-Zlib (1.35) [ 2 ][ DONE ]
>>> perl-Digest (1.19) [ 1 ][ DONE ]
>>> perl-Digest-SHA1 (2.13) [ 1 ][ DONE ]
>>> perl-Digest-HMAC (1.03) [ 1 ][ DONE ]
>>> perl-libwww (6.62) [ 1 ][ DONE ]
>>> perl-LWP-Protocol-https (6.10) [ 1 ][ DONE ]
>>> perl-Net-HTTP (6.22) [ 1 ][ DONE ]
>>> perl-Net-DNS (1.30) [ 2 ][ DONE ]
>>> perl-Net-IPv4Addr (0.10) [ 1 ][ DONE ]
>>> perl-Net_SSLeay (1.88) [ 3 ][ DONE ]
>>> perl-IO-Stringy (2.110) [ 1 ][ DONE ]
>>> perl-IO-Socket-SSL (2.066) [ 1 ][ DONE ]
>>> perl-Unix-Syslog (1.1) [ 1 ][ DONE ]
>>> perl-Mail-Tools (2.07) [ 1 ][ DONE ]
>>> perl-MIME-Tools (5.509) [ 2 ][ DONE ]
>>> perl-Net-Server (0.97) [ 1 ][ DONE ]
>>> perl-Canary-Stability (2013) [ 1 ][ DONE ]
>>> perl-Convert-TNEF (0.18) [ 1 ][ DONE ]
>>> perl-Convert-UUlib (1.8) [ 2 ][ DONE ]
>>> perl-Archive-Tar (1.29) [ 1 ][ DONE ]
>>> perl-Archive-Zip (1.16) [ 1 ][ DONE ]
>>> perl-Text-Tabs+Wrap (2013.0523) [ 1 ][ DONE ]
>>> perl-XML-Parser (2.46) [ 2 ][ DONE ]
>>> perl-Crypt-PasswdMD5 (1.41) [ 0 ][ DONE ]
>>> perl-Net-Telnet (3.03) [ 1 ][ DONE ]
>>> perl-JSON (4.05) [ 1 ][ DONE ]
>>> python3-setuptools (65.4.1) [ 5 ][ DONE ]
>>> python3-inotify (0.2.10) [ 1 ][ DONE ]
>>> python3-docutils (0.19) [ 3 ][ DONE ]
>>> python3-daemon (2.3.1) [ 1 ][ DONE ]
>>> glib (2.71.1) [ 26 ][ DONE ]
>>> ntp (4.2.8p15) [ 50 ][ DONE ]
>>> openssh (9.1p1) [ 33 ][ DONE ]
>>> fontconfig (2.13.1) [ 13 ][ DONE ]
>>> dejavu-fonts-ttf (2.37) [ 1 ][ DONE ]
>>> ubuntu-font-family (0.83) [ 1 ][ DONE ]
>>> freefont (20060126) [ 1 ][ DONE ]
>>> pixman (0.40.0) [ 9 ][ DONE ]
>>> cairo (1.16.0) [ 29 ][ DONE ]
>>> harfbuzz (4.4.1) [ 15 ][ DONE ]
>>> fribidi (1.0.12) [ 4 ][ DONE ]
>>> pango (1.50.6) [ 8 ][ DONE ]
>>> rrdtool (1.8.0) [ 22 ][ DONE ]
>>> setup [ 12 ][ DONE ]
>>> jansson (2.14) [ 5 ][ DONE ]
>>> yaml (0.2.5) [ 4 ][ DONE ]
>>> libhtp (0.5.41) [ 11 ][ DONE ]
>>> colm (0.13.0.6) [ 15 ][ DONE ]
>>> ragel (7.0.0.11) [ 1:20 ][ DONE ]
>>> hyperscan (5.4.0) [ 0 ][ SKIP ]
>>> suricata (6.0.8) [ 3:34 ][ DONE ]
>>> ids-ruleset-sources [ 0 ][ DONE ]
>>> ipblocklist-sources [ 1 ][ DONE ]
>>> squid (5.7) [ 2:08 ][ DONE ]
>>> squidguard (1.6.0) [ 6 ][ DONE ]
>>> calamaris (2.59) [ 1 ][ DONE ]
>>> tcpdump (4.99.1) [ 6 ][ DONE ]
>>> traceroute (2.1.0) [ 0 ][ DONE ]
>>> vlan (1.9) [ 1 ][ DONE ]
>>> wireless (30.pre9) [ 1 ][ DONE ]
>>> pakfire (0.99) [ 0 ][ DONE ]
>>> spandsp (0.0.6) [ 11 ][ DONE ]
>>> lz4 (1.9.3) [ 9 ][ DONE ]
>>> lzo (2.10) [ 14 ][ DONE ]
>>> openvpn (2.5.7) [ 23 ][ DONE ]
>>> mpage (2.5.7) [ 1 ][ DONE ]
>>> dbus (1.14.0) [ 20 ][ DONE ]
>>> intltool (0.51.0) [ 2 ][ DONE ]
>>> libdaemon (0.14) [ 7 ][ DONE ]
>>> avahi (0.8) [ 20 ][ DONE ]
>>> cups (2.4.1) [ 21 ][ DONE ]
>>> lcms2 (2.13.1) [ 8 ][ DONE ]
>>> ghostscript (9.56.1) [ 30 ][ DONE ]
>>> qpdf (10.4.0) [ 16 ][ DONE ]
>>> poppler (22.04.0) [ 7 ][ DONE ]
>>> poppler-data (0.4.11) [ 2 ][ DONE ]
>>> cups-filters (1.28.14) [ 12 ][ DONE ]
>>> epson-inkjet-printer-escpr (1.6.12) [ 7 ][ DONE ]
>>> cups-pdf (3.0.1) [ 1 ][ DONE ]
>>> foomatic (4.0.9) [ 56 ][ DONE ]
>>> hplip (3.22.6) [ 18 ][ DONE ]
>>> cifs-utils (6.14) [ 5 ][ DONE ]
>>> krb5 (1.20) [ 27 ][ DONE ]
>>> rpcsvc-proto (1.4.3) [ 3 ][ DONE ]
>>> samba (4.17.0) [ 6:12 ][ DONE ]
>>> netatalk (3.1.12) [ 25 ][ DONE ]
>>> sudo (1.9.11p3) [ 27 ][ DONE ]
>>> mc (4.8.28) [ 29 ][ DONE ]
>>> wget (1.21.3) [ 34 ][ DONE ]
>>> bridge-utils (1.5) [ 4 ][ DONE ]
>>> smartmontools (7.3) [ 6 ][ DONE ]
>>> htop (3.2.1) [ 8 ][ DONE ]
>>> chkconfig (1.5) [ 1 ][ DONE ]
>>> postfix (3.7.3) [ 12 ][ DONE ]
>>> fetchmail (6.4.32) [ 7 ][ DONE ]
>>> clamav (0.105.1) [ 3:18 ][ DONE ]
>>> perl-NetAddr-IP (4.079) [ 15 ][ DONE ]
>>> dma (0.13) [ 1 ][ DONE ]
>>> alsa (1.2.5.1) [ 25 ][ DONE ]
>>> mpfire [ 1 ][ DONE ]
>>> guardian (2.0.2) [ 0 ][ DONE ]
>>> libid3tag (0.15.1b) [ 7 ][ DONE ]
>>> libmad (0.15.1b) [ 10 ][ DONE ]
>>> libogg (1.3.5) [ 5 ][ DONE ]
>>> libvorbis (1.3.7) [ 5 ][ DONE ]
>>> flac (1.3.3) [ 12 ][ DONE ]
>>> lame (3.100) [ 9 ][ DONE ]
>>> sox (14.4.2) [ 26 ][ DONE ]
>>> soxr (0.1.3) [ 4 ][ DONE ]
>>> libshout (2.4.3) [ 7 ][ DONE ]
>>> xvid (1.3.7) [ 2 ][ DONE ]
>>> libmpeg2 (0.4.1) [ 9 ][ DONE ]
>>> gnump3d (3.0) [ 3 ][ DONE ]
>>> rsync (3.2.6) [ 16 ][ DONE ]
>>> rpcbind (1.2.6) [ 2 ][ DONE ]
>>> keyutils (1.5.11) [ 1 ][ DONE ]
>>> nfs (2.6.1) [ 20 ][ DONE ]
>>> gnu-netcat (0.7.1) [ 7 ][ DONE ]
>>> ncat (7.92) [ 32 ][ DONE ]
>>> nmap (7.92) [ 37 ][ DONE ]
>>> etherwake (1.09) [ 1 ][ DONE ]
>>> bwm-ng (0.6.1-f54b3fa) [ 7 ][ DONE ]
>>> sysstat (12.5.4) [ 5 ][ DONE ]
>>> strongswan (5.9.8) [ 51 ][ DONE ]
>>> rng-tools (6.14) [ 5 ][ DONE ]
>>> lsof (4.95.0.linux) [ 1 ][ DONE ]
>>> br2684ctl [ 1 ][ DONE ]
>>> pcmciautils (014) [ 2 ][ DONE ]
>>> lm_sensors (3-6-0) [ 1 ][ DONE ]
>>> libstatgrab (0.92) [ 15 ][ DONE ]
>>> liboping (1.3.4) [ 6 ][ DONE ]
>>> collectd (4.10.9) [ 1:38 ][ DONE ]
>>> elinks (0.12pre6) [ 19 ][ DONE ]
>>> igmpproxy (0.3) [ 2 ][ DONE ]
>>> opus (1.3.1) [ 9 ][ DONE ]
>>> python3-toml (0.10.2) [ 2 ][ DONE ]
>>> python3-pyproject2setuppy (22) [ 1 ][ DONE ]
>>> python3-pyparsing (3.0.9) [ 2 ][ DONE ]
>>> spice-protocol (0.14.3) [ 1 ][ DONE ]
>>> spice (0.15.0) [ 34 ][ DONE ]
>>> sdl2 (2.0.22) [ 19 ][ DONE ]
>>> libusbredir (0.8.0) [ 4 ][ DONE ]
>>> libseccomp (2.5.4) [ 4 ][ DONE ]
>>> qemu (7.0.0) [ 1:21 ][ DONE ]
>>> netsnmpd (5.9.1) [ 2:51 ][ DONE ]
>>> nagios_nrpe (4.1.0) [ 19 ][ DONE ]
>>> nagios-plugins (2.3.3) [ 52 ][ DONE ]
>>> icinga (1.11.4) [ 23 ][ DONE ]
>>> observium-agent (18.9.1) [ 4 ][ DONE ]
>>> ebtables (2.0.10-4) [ 1 ][ DONE ]
>>> faad2 (2_10_0) [ 12 ][ DONE ]
>>> alac (0.0.7) [ 10 ][ DONE ]
>>> ffmpeg (4.4) [ 38 ][ DONE ]
>>> vdr (2.4.7) [ 4 ][ DONE ]
>>> vdr_streamdev (0.6.1) [ 3 ][ DONE ]
>>> vdr_epgsearch (2.4.0+git20191101) [ 12 ][ DONE ]
>>> vdr_dvbapi (2.2.5) [ 1 ][ DONE ]
>>> vdr_eepg (master) [ 2 ][ DONE ]
>>> w_scan (20170107) [ 3 ][ DONE ]
>>> fmt (9.0.0) [ 4 ][ DONE ]
>>> mpd (0.23.8) [ 11 ][ DONE ]
>>> libmpdclient (2.19) [ 2 ][ DONE ]
>>> mpc (0.34) [ 2 ][ DONE ]
>>> perl-Net-CIDR-Lite (0.21) [ 1 ][ DONE ]
>>> perl-Net-SMTP-SSL (1.04) [ 1 ][ DONE ]
>>> perl-MIME-Base64 (3.16) [ 2 ][ DONE ]
>>> perl-Authen-SASL (2.16) [ 1 ][ DONE ]
>>> perl-MIME-Lite (3.033) [ 1 ][ DONE ]
>>> perl-Email-Date-Format (1.005) [ 1 ][ DONE ]
>>> git (2.37.1) [ 11 ][ DONE ]
>>> squidclamav (5.11) [ 7 ][ DONE ]
>>> vnstat (2.10) [ 5 ][ DONE ]
>>> iw (5.9) [ 1 ][ DONE ]
>>> wpa_supplicant (2.10) [ 3 ][ DONE ]
>>> hostapd (2_10) [ 2 ][ DONE ]
>>> syslinux (6.04-pre1) [ 0 ][ SKIP ]
>>> tftpd (5.2) [ 7 ][ DONE ]
>>> cpufrequtils (008) [ 1 ][ DONE ]
>>> gutenprint (5.3.4) [ 14 ][ DONE ]
>>> apcupsd (3.14.14) [ 8 ][ DONE ]
>>> fireperf (0.2.0) [ 8 ][ DONE ]
>>> iperf (2.1.7) [ 7 ][ DONE ]
>>> iperf3 (3.10.1) [ 5 ][ DONE ]
>>> 7zip (17.04) [ 4 ][ DONE ]
>>> lynis (3.0.8) [ 1 ][ DONE ]
>>> sshfs (3.7.2) [ 2 ][ DONE ]
>>> taglib (1.12) [ 3 ][ DONE ]
>>> sslh (1.22c) [ 1 ][ DONE ]
>>> perl-gettext (1.05) [ 1 ][ DONE ]
>>> perl-Sort-Naturally (1.03) [ 1 ][ DONE ]
>>> vdradmin (3.6.10) [ 1 ][ DONE ]
>>> perl-DBI (1.631) [ 4 ][ DONE ]
>>> perl-DBD-SQLite (1.40) [ 1 ][ DONE ]
>>> perl-File-ReadBackwards (1.05) [ 1 ][ DONE ]
>>> openvmtools (stable-12.0.5) [ 0 ][ SKIP ]
>>> joe (4.6) [ 10 ][ DONE ]
>>> monit (5.32.0) [ 21 ][ DONE ]
>>> nut (2.8.0) [ 31 ][ DONE ]
>>> watchdog (5.16) [ 4 ][ DONE ]
>>> usb_modeswitch (2.6.1) [ 1 ][ DONE ]
>>> usb_modeswitch_data (20191128) [ 2 ][ DONE ]
>>> zerofree (1.1.1) [ 1 ][ DONE ]
>>> minicom (2.8) [ 6 ][ DONE ]
>>> ddrescue (1.25) [ 1 ][ DONE ]
>>> parted (3.5) [ 31 ][ DONE ]
>>> swig (4.0.2) [ 12 ][ DONE ]
>>> dtc (1.6.1) [ 0 ][ SKIP ]
>>> u-boot (2021.07) [ 1:52 ][ DONE ]
>>> u-boot-friendlyarm (5e8607b-nanopi-r1-binary) [ 0 ][ DONE ]
>>> wireless-regdb (2022-08-12) [ 1 ][ DONE ]
>>> ddns (014) [ 5 ][ DONE ]
>>> python3-pycparser (2.21) [ 2 ][ DONE ]
>>> python3-charset-normalizer (2.1.1) [ 2 ][ DONE ]
>>> python3-certifi (2022.9.24) [ 1 ][ DONE ]
>>> python3-idna (3.4) [ 2 ][ DONE ]
>>> python3-requests (2.28.1) [ 1 ][ DONE ]
>>> python3-tomli (2.0.1) [ 2 ][ DONE ]
>>> python3-pep517 (0.13.0) [ 1 ][ DONE ]
>>> python3-build (0.8.0) [ 2 ][ DONE ]
>>> python3-install (0.0.3) [ 1 ][ DONE ]
>>> python3-urllib3 (1.26.12) [ 2 ][ DONE ]
>>> python3-flit (3.7.1) [ 2 ][ DONE ]
>>> python3-packaging (21.3) [ 2 ][ DONE ]
>>> python3-typing-extensions (4.4.0) [ 1 ][ DONE ]
>>> python3-semantic-version (2.10.0) [ 1 ][ DONE ]
>>> python3-setuptools-scm (7.0.5) [ 2 ][ DONE ]
>>> python3-setuptools-rust (1.5.2) [ 1 ][ DONE ]
>>> python3-six (1.16.0) [ 2 ][ DONE ]
>>> python3-dateutil (2.8.2) [ 2 ][ DONE ]
>>> python3-jmespath (1.0.1) [ 1 ][ DONE ]
>>> python3-colorama (0.4.5) [ 1 ][ DONE ]
>>> python3-yaml (6.0) [ 2 ][ DONE ]
>>> python3-s3transfer (0.6.0) [ 2 ][ DONE ]
>>> python3-rsa (4.9) [ 1 ][ DONE ]
>>> python3-pyasn1 (0.4.8) [ 2 ][ DONE ]
>>> python3-botocore (1.27.89) [ 6 ][ DONE ]
>>> python3-cffi (1.15.1) [ 2 ][ DONE ]
>>> python3-cryptography (38.0.1) [ 3:14 ][ DONE ]
>>> python3-circuitbreaker (1.4.0) [ 1 ][ DONE ]
>>> python3-pytz (2022.4) [ 4 ][ DONE ]
>>> python3-click (8.1.3) [ 2 ][ DONE ]
>>> python3-arrow (1.2.3) [ 2 ][ DONE ]
>>> python3-terminaltables (3.1.10) [ 1 ][ DONE ]
>>> python3-pkgconfig (1.5.5) [ 2 ][ DONE ]
>>> python3-msgpack (1.0.4) [ 2 ][ DONE ]
>>> python3-attr (0.3.2) [ 1 ][ DONE ]
>>> python3-attrs (22.1.0) [ 2 ][ DONE ]
>>> python3-sniffio (1.3.0) [ 1 ][ DONE ]
>>> python3-sortedcontainers (2.4.0) [ 2 ][ DONE ]
>>> python3-outcome (1.2.0) [ 1 ][ DONE ]
>>> python3-async_generator (1.10) [ 2 ][ DONE ]
>>> python3-trio (0.22.0) [ 2 ][ DONE ]
>>> python3-pyfuse3 (3.2.2) [ 2 ][ DONE ]
>>> aws-cli (1.23.12) [ 14 ][ DONE ]
>>> oci-python-sdk (2.64.0) [ 50 ][ DONE ]
>>> oci-cli (3.7.3) [ 13 ][ DONE ]
>>> transmission (3.00) [ 14 ][ DONE ]
>>> mtr (0.95) [ 6 ][ DONE ]
>>> minidlna (1.3.0) [ 9 ][ DONE ]
>>> acpid (2.0.32) [ 5 ][ DONE ]
>>> fping (5.0) [ 3 ][ DONE ]
>>> telnet (0.17) [ 3 ][ DONE ]
>>> xinetd (2.3.15) [ 6 ][ DONE ]
>>> stress (1.0.5) [ 4 ][ DONE ]
>>> sarg (2.4.0) [ 9 ][ DONE ]
>>> nginx (1.21.6) [ 10 ][ DONE ]
>>> sysbench (1.0.20) [ 0 ][ SKIP ]
>>> strace (5.17) [ 32 ][ DONE ]
>>> ltrace (0.7.3) [ 8 ][ DONE ]
>>> ipfire-netboot (v2.0) [ 0 ][ SKIP ]
>>> lcdproc (0e2ce9b) [ 11 ][ DONE ]
>>> keepalived (2.2.7) [ 11 ][ DONE ]
>>> ipvsadm (1.31) [ 1 ][ DONE ]
>>> perl-Carp-Clan (6.08) [ 1 ][ DONE ]
>>> perl-Date-Calc (6.4) [ 1 ][ DONE ]
>>> perl-Date-Manip (6.86) [ 8 ][ DONE ]
>>> perl-File-Tail (1.3) [ 1 ][ DONE ]
>>> perl-TimeDate (2.33) [ 1 ][ DONE ]
>>> swatch (3.2.4) [ 2 ][ DONE ]
>>> tor (0.4.7.11) [ 35 ][ DONE ]
>>> wavemon (0.7.5) [ 4 ][ DONE ]
>>> iptraf-ng (1.2.1) [ 1 ][ DONE ]
>>> iotop (0.6) [ 2 ][ DONE ]
>>> stunnel (5.63) [ 8 ][ DONE ]
>>> bacula (9.6.7) [ 27 ][ DONE ]
>>> perl-Font-TTF (1.06) [ 3 ][ DONE ]
>>> perl-IO-String (1.08) [ 1 ][ DONE ]
>>> perl-PDF-API2 (2.033) [ 2 ][ DONE ]
>>> proxy-accounting (1.0.4) [ 1 ][ DONE ]
>>> tmux (3.3) [ 8 ][ DONE ]
>>> perl-Text-CSV_XS (1.12) [ 2 ][ DONE ]
>>> lua (5.4.4) [ 1 ][ DONE ]
>>> haproxy (2.6.0) [ 2 ][ DONE ]
>>> ipset (7.15) [ 13 ][ DONE ]
>>> dnsdist (1.7.2) [ 0 ][ SKIP ]
>>> bird (2.0.9) [ 5 ][ DONE ]
>>> libyang (2.0.194) [ 3 ][ DONE ]
>>> frr (8.0.1) [ 40 ][ DONE ]
>>> dmidecode (3.3) [ 0 ][ SKIP ]
>>> mcelog (181) [ 0 ][ SKIP ]
>>> libpciaccess (0.16) [ 6 ][ DONE ]
>>> libyajl (2.1.0) [ 2 ][ DONE ]
>>> libvirt (7.10.0) [ 0 ][ SKIP ]
>>> libtalloc (2.3.1) [ 28 ][ DONE ]
>>> freeradius (3.0.23) [ 58 ][ DONE ]
>>> perl-common-sense (3.74) [ 1 ][ DONE ]
>>> perl-inotify2 (1.22) [ 2 ][ DONE ]
>>> perl-Net-IP (1.26) [ 1 ][ DONE ]
>>> wio (1.3.2) [ 1 ][ DONE ]
>>> iftop (1.0pre4) [ 4 ][ DONE ]
>>> mdns-repeater (1.10) [ 1 ][ DONE ]
>>> i2c-tools (4.3) [ 1 ][ DONE ]
>>> nss-myhostname (0.3) [ 6 ][ DONE ]
>>> dehydrated (0.7.0) [ 1 ][ DONE ]
>>> libplist (2.2.0) [ 10 ][ DONE ]
>>> nqptp (d900567) [ 5 ][ DONE ]
>>> shairport-sync (3cc1ec6) [ 12 ][ DONE ]
>>> borgbackup (1.2.0) [ 3 ][ DONE ]
>>> lmdb (0.9.29) [ 1 ][ DONE ]
>>> knot (3.1.7) [ 11 ][ DONE ]
>>> spectre-meltdown-checker (0.45) [ 1 ][ DONE ]
>>> zabbix_agentd (6.0.6) [ 20 ][ DONE ]
>>> flashrom (1.2) [ 0 ][ SKIP ]
>>> firmware-update (20210107) [ 4 ][ DONE ]
>>> tshark (3.6.3) [ 40 ][ DONE ]
>>> speedtest-cli (2.1.3) [ 2 ][ DONE ]
>>> amazon-ssm-agent (3.0.356.0) [ 0 ][ SKIP ]
>>> libloc (0.9.15) [ 34 ][ DONE ]
>>> ncdu (1.17) [ 3 ][ DONE ]
>>> lshw (B.02.19.2) [ 1 ][ DONE ]
>>> socat (1.7.4.2) [ 24 ][ DONE ]
>>> libcdada (0.3.5) [ 20 ][ DONE ]
>>> pmacct (1.7.6) [ 1:54 ][ DONE ]
>>> squid-asnbl (0.2.3) [ 1 ][ DONE ]
>>> qemu-ga (7.0.0) [ 1 ][ DONE ]
>>> gptfdisk (1.0.9) [ 1 ][ DONE ]
>>> oath-toolkit (2.6.7) [ 1:17 ][ DONE ]
>>> qrencode (4.1.1) [ 3 ][ DONE ]
>>> perl-File-Remove (1.60) [ 2 ][ DONE ]
>>> perl-Module-Build (0.4231) [ 1 ][ DONE ]
>>> perl-Module-ScanDeps (1.31) [ 1 ][ DONE ]
>>> perl-YAML-Tiny (1.73) [ 2 ][ DONE ]
>>> perl-Module-Install (1.19) [ 1 ][ DONE ]
>>> perl-Imager (1.012) [ 10 ][ DONE ]
>>> perl-Imager-QRCode (0.035) [ 2 ][ DONE ]
>>> perl-MIME-Base32 (1.303) [ 1 ][ DONE ]
>>> perl-URI-Encode (1.1.1) [ 1 ][ DONE ]
>>> Building installer
>>> memtest (6.00) [ 0 ][ SKIP ]
>>> installer [ 12 ][ DONE ]
>>> strip [ 42 ][ DONE ]
>>> Building packages
>>> Generating packages list from logs [ DONE ]
>>> cdrom [ 3:11 ][ DONE ]
>>> flash-images [ 4:17 ][ DONE ]
>>> core-updates [ 0 ][ FAIL ]
>>>
>>> tar: usr/lib/python3.10/lib-dynload/_testcapi.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/_testimportmultiple.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/_testinternalcapi.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/_testmultiphase.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/_uuid.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/_xxsubinterpreters.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/_xxtestfuzz.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/_zoneinfo.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/array.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/audioop.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/binascii.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/cmath.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/fcntl.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/grp.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/math.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/mmap.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/ossaudiodev.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/pyexpat.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/readline.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/resource.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/select.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/spwd.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/syslog.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/termios.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/unicodedata.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/xxlimited.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/xxlimited_35.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: usr/lib/python3.10/lib-dynload/zlib.cpython-310-armv6l-linux-gnu.so: Cannot stat: No such file or directory
>>> tar: Exiting with failure status due to previous errors
>>> make: *** [core-updates:65: core/172] Error 2
>>>
>>> ERROR: Building core-updates [ FAIL ]
>>> Check /build/nightly/next/log/_build.packages.log for errors if applicable[ FAIL ]
next prev parent reply other threads:[~2022-11-21 11:30 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4NDkG32JB7z1yBl@arm64-01.zrh.ipfire.org>
2022-11-19 20:33 ` Peter Müller
2022-11-19 22:08 ` Adolf Belka
2022-11-21 11:30 ` Michael Tremer [this message]
2022-11-25 12:06 ` Peter Müller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=03577407-69E5-403A-9078-B634C183A649@ipfire.org \
--to=michael.tremer@ipfire.org \
--cc=development@lists.ipfire.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox