GIT - 'push' / 'pull' not working

GIT - 'push' / 'pull' not working

[Matthias Fischer]

[-- Attachment #1: Type: text/plain, Size: 1713 bytes --]

Hi,

since yesterday, while trying to 'push' some updates (grep / hdparm / 
gnupg) to repo, I'm getting the following errors:

***SNIP***
root(a)Devel: /home/matz/ipfire-2.x # git push mfischer gnupg
ssh: connect to host git.ipfire.org port 22: No route to host
fatal: Could not read from remote repository.

Please make sure you have the correct access rights
and the repository exists.
***SNAP***

The same happens with - for example - 'git pull origin next'.

Testing with 'ping':

***SNIP***
root(a)Devel: /home/matz/ipfire-2.x # ping git.ipfire.org
PING gw03.ipfire.org (178.63.73.248) 56(84) bytes of data.
64 bytes from git.ipfire.org (178.63.73.248): icmp_seq=1 ttl=53 time=17.8 ms
64 bytes from git.ipfire.org (178.63.73.248): icmp_seq=2 ttl=53 time=17.3 ms
64 bytes from git.ipfire.org (178.63.73.248): icmp_seq=3 ttl=53 time=16.8 ms
64 bytes from git.ipfire.org (178.63.73.248): icmp_seq=4 ttl=53 time=18.8 ms
64 bytes from git.ipfire.org (178.63.73.248): icmp_seq=5 ttl=53 time=16.7 ms
64 bytes from git.ipfire.org (178.63.73.248): icmp_seq=6 ttl=53 time=17.6 ms
64 bytes from git.ipfire.org (178.63.73.248): icmp_seq=7 ttl=53 time=16.4 ms
64 bytes from git.ipfire.org (178.63.73.248): icmp_seq=8 ttl=53 time=17.1 ms
64 bytes from git.ipfire.org (178.63.73.248): icmp_seq=9 ttl=53 time=17.7 ms
^C
--- gw03.ipfire.org ping statistics ---
10 packets transmitted, 9 received, 10% packet loss, time 9014ms
rtt min/avg/max/mdev = 16.491/17.393/18.810/0.680 ms
***SNAP***

The machine had no problems so far, updates are running ('apt-get ...' 
is working OK) - in my opinion I didn't change anything.

Bug or Feature?

Regards
Matthias
-- 
tails, linux, USB, CD, secure desktop, IRC, truecrypt, tor, onion

Re: GIT - 'push' / 'pull' not working

[Michael Tremer]

[-- Attachment #1: Type: text/plain, Size: 2020 bytes --]

The machine had a bit of trouble and I rebooted it. Should work fine
now.

You should check the email address that you use to send emails to this
list. I get in my header that you sent it to "ipfire(a)mail01.ipfire.org".

-Michael

On Sat, 2014-11-29 at 13:48 +0100, Matthias Fischer wrote:
> Hi,
> 
> since yesterday, while trying to 'push' some updates (grep / hdparm / 
> gnupg) to repo, I'm getting the following errors:
> 
> ***SNIP***
> root(a)Devel: /home/matz/ipfire-2.x # git push mfischer gnupg
> ssh: connect to host git.ipfire.org port 22: No route to host
> fatal: Could not read from remote repository.
> 
> Please make sure you have the correct access rights
> and the repository exists.
> ***SNAP***
> 
> The same happens with - for example - 'git pull origin next'.
> 
> Testing with 'ping':
> 
> ***SNIP***
> root(a)Devel: /home/matz/ipfire-2.x # ping git.ipfire.org
> PING gw03.ipfire.org (178.63.73.248) 56(84) bytes of data.
> 64 bytes from git.ipfire.org (178.63.73.248): icmp_seq=1 ttl=53 time=17.8 ms
> 64 bytes from git.ipfire.org (178.63.73.248): icmp_seq=2 ttl=53 time=17.3 ms
> 64 bytes from git.ipfire.org (178.63.73.248): icmp_seq=3 ttl=53 time=16.8 ms
> 64 bytes from git.ipfire.org (178.63.73.248): icmp_seq=4 ttl=53 time=18.8 ms
> 64 bytes from git.ipfire.org (178.63.73.248): icmp_seq=5 ttl=53 time=16.7 ms
> 64 bytes from git.ipfire.org (178.63.73.248): icmp_seq=6 ttl=53 time=17.6 ms
> 64 bytes from git.ipfire.org (178.63.73.248): icmp_seq=7 ttl=53 time=16.4 ms
> 64 bytes from git.ipfire.org (178.63.73.248): icmp_seq=8 ttl=53 time=17.1 ms
> 64 bytes from git.ipfire.org (178.63.73.248): icmp_seq=9 ttl=53 time=17.7 ms
> ^C
> --- gw03.ipfire.org ping statistics ---
> 10 packets transmitted, 9 received, 10% packet loss, time 9014ms
> rtt min/avg/max/mdev = 16.491/17.393/18.810/0.680 ms
> ***SNAP***
> 
> The machine had no problems so far, updates are running ('apt-get ...' 
> is working OK) - in my opinion I didn't change anything.
> 
> Bug or Feature?
> 
> Regards
> Matthias

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]