* core 90 test download errors @ 2015-05-09 14:21 Paul Simmons 2015-05-09 22:18 ` Rod Rodolico 2015-05-10 8:08 ` Michael Tremer 0 siblings, 2 replies; 4+ messages in thread From: Paul Simmons @ 2015-05-09 14:21 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 349 bytes --] There appear to be only two mirrors from which I can download core 90 testing, and the download fails. It is probably due to my (substandard) ISP (HughesNot), but I wonder if it would succeed if there were a closer mirror to me (USA)? Failing that, perhaps a tweak to pakfire (enabling more or better download retries) is in order? Thanks! Paul ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: core 90 test download errors 2015-05-09 14:21 core 90 test download errors Paul Simmons @ 2015-05-09 22:18 ` Rod Rodolico 2015-05-10 8:08 ` Michael Tremer 1 sibling, 0 replies; 4+ messages in thread From: Rod Rodolico @ 2015-05-09 22:18 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 1694 bytes --] Paul, It may not be your network connection. I have a mirror (mirror.smartappliances.us/ipfire, if I remember right). As of right now, it was still updating from the main IPFire server. It just takes a while to get all the new pieces. So, it is possible you were using a mirror that is not fully updated yet. I do bandwidth limit the sync to keep from killing my server and the main one. That being said, I updated my test router a couple of hours ago. Sorry, I did not see which mirrors it used. I believe the update looks for the least busy, but I know it doesn't look for the closest as a couple of routers on the same subnet as my mirror have, in the past, used European mirrors. Unless it is your network connection, it may just be that the mirrors you have been assigned are still updating. So, if you network connection is good, you might just try again. NOTE: It appears from the logs that my mirror is working on the armv5tel, so I believe that means the i386 is completely downloaded. Rod On 05/09/2015 09:21 AM, Paul Simmons wrote: > There appear to be only two mirrors from which I can download core 90 > testing, and the download fails. It is probably due to my (substandard) > ISP (HughesNot), but I wonder if it would succeed if there were a closer > mirror to me (USA)? > > Failing that, perhaps a tweak to pakfire (enabling more or better > download retries) is in order? > > Thanks! > Paul > > _______________________________________________ > Development mailing list > Development(a)lists.ipfire.org > http://lists.ipfire.org/mailman/listinfo/development > -- Rod Rodolico Daily Data, Inc. POB 140465 Dallas TX 75214-0465 214.827.2170 http://www.dailydata.net ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: core 90 test download errors 2015-05-09 14:21 core 90 test download errors Paul Simmons 2015-05-09 22:18 ` Rod Rodolico @ 2015-05-10 8:08 ` Michael Tremer 2015-05-10 12:27 ` Paul Simmons 1 sibling, 1 reply; 4+ messages in thread From: Michael Tremer @ 2015-05-10 8:08 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 951 bytes --] Hello Paul, can you tell us what exact error you get? We have multiple mirror servers but only use two for the testing releases because mirror syncing is an issue which takes sometimes a long time. All the mirrors are OK right now: http://mirrors.ipfire.org/ Pakfire should try each mirror once. If all fail, pakfire will use the master mirror. -Michael On Sat, 2015-05-09 at 09:21 -0500, Paul Simmons wrote: > There appear to be only two mirrors from which I can download core 90 > testing, and the download fails. It is probably due to my (substandard) > ISP (HughesNot), but I wonder if it would succeed if there were a closer > mirror to me (USA)? > > Failing that, perhaps a tweak to pakfire (enabling more or better > download retries) is in order? > > Thanks! > Paul > > _______________________________________________ > Development mailing list > Development(a)lists.ipfire.org > http://lists.ipfire.org/mailman/listinfo/development [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: core 90 test download errors 2015-05-10 8:08 ` Michael Tremer @ 2015-05-10 12:27 ` Paul Simmons 0 siblings, 0 replies; 4+ messages in thread From: Paul Simmons @ 2015-05-10 12:27 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 1026 bytes --] On Sun, 2015-05-10 at 10:08 +0200, Michael Tremer wrote: > Hello Paul, > > can you tell us what exact error you get? > > We have multiple mirror servers but only use two for the testing > releases because mirror syncing is an issue which takes sometimes a long > time. > > All the mirrors are OK right now: http://mirrors.ipfire.org/ > > Pakfire should try each mirror once. If all fail, pakfire will use the > master mirror. > > -Michael Thanks for your quick reply, Michael. I enclose an excerpt from the terminal session, and one from the system log. After some experimentation, I was able to use "wget" to copy the needed paks from mirror.lightningwirelabs.com/pub/*blah* to /var/cache/pakfire/ on the firewall and invoke the upgrade. I am willing to continue using that method, because I understand the constraints on mirroring. As I said, I believe the root cause is the inadequacy of my ISP, but I have no other service available :-( . That is the downside of "life in the boonies". Best regards, Paul [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: pakfire1.log --] [-- Type: text/x-log, Size: 2557 bytes --] 14:01:52 pakfire: PAKFIRE INFO: IPFire Pakfire 2.17.1 started! 14:01:52 pakfire: CRYPTO INFO: Checking GnuPG Database 14:01:52 pakfire: CRYPTO INFO: Database is okay 14:01:52 pakfire: CORE INFO: core-list.db is 21723 seconds old. - DEBUG: force 14:01:52 pakfire: DOWNLOAD STARTED: lists/core-list.db 14:01:52 pakfire: MIRROR INFO: 2 servers found in list 14:01:53 pakfire: PING INFO: ipfire.earl-net.com is alive 14:01:53 pakfire: DOWNLOAD INFO: Host: ipfire.earl-net.com (HTTP) - File: pakfire2/2.17.1/lists/co re-list.db 14:01:56 pakfire: DOWNLOAD INFO: pakfire2/2.17.1/lists/core-list.db has size of 248 bytes 14:01:59 pakfire: DOWNLOAD INFO: HTTP-Status-Code: 200 - 200 OK 14:01:59 pakfire: DOWNLOAD INFO: File received. Start checking signature... 14:01:59 pakfire: DOWNLOAD INFO: Signature of core-list.db is fine. 14:01:59 pakfire: DOWNLOAD FINISHED: pakfire2/2.17.1/lists/core-list.db 14:01:59 pakfire: CORE UPGR: Upgrading from release 89 to 90 14:02:00 pakfire: DOWNLOAD STARTED: paks/core-upgrade-2.17-90.ipfire 14:02:00 pakfire: MIRROR INFO: 2 servers found in list 14:02:00 pakfire: PING INFO: ipfire.earl-net.com is alive 14:02:00 pakfire: DOWNLOAD INFO: Host: ipfire.earl-net.com (HTTP) - File: pakfire2/2.17.1/paks/cor e-upgrade-2.17-90.ipfire 14:02:03 pakfire: DOWNLOAD INFO: pakfire2/2.17.1/paks/core-upgrade-2.17-90.ipfire has size of 5702 0596 bytes 14:09:07 pakfire: DOWNLOAD INFO: HTTP-Status-Code: 500 - 500 Can't read entity body: Connection re set by peer 14:09:07 pakfire: Giving up: There was no chance to get the file paks/core-upgrade-2.17-90.ipfire from any available server. There was an error on the way. Please fix it. 14:09:07 pakfire: PAKFIRE UPGR: core-upgrade-90: Decrypting... 14:09:07 pakfire: CLEANUP: tmp 14:09:07 pakfire: DOWNLOAD STARTED: paks/core-upgrade-2.17-90.ipfire 14:09:07 pakfire: MIRROR INFO: 2 servers found in list 14:09:08 pakfire: PING INFO: mirror1.ipfire.org is alive 14:09:08 pakfire: DOWNLOAD INFO: Host: mirror1.ipfire.org (HTTP) - File: pakfire2/2.17.1/paks/core -upgrade-2.17-90.ipfire 14:09:11 pakfire: DOWNLOAD INFO: pakfire2/2.17.1/paks/core-upgrade-2.17-90.ipfire has size of 5702 0596 bytes 14:16:31 pakfire: DOWNLOAD INFO: HTTP-Status-Code: 500 - 500 Can't read entity body: Connection re set by peer 14:16:31 pakfire: Giving up: There was no chance to get the file paks/core-upgrade-2.17-90.ipfire from any available server. There was an error on the way. Please fix it. 14:16:31 pakfire: DECRYPT STARTED: core-upgrade-90 14:16:31 pakfire: DECRYPT FINISHED: core-upgrade-90 - Status: 2 [-- Attachment #3: pakfire.terminal.txt --] [-- Type: text/plain, Size: 818 bytes --] pakfire upgrade --force core-list.db 100.00% |=============================>| 248.00 B CORE UPGR: Upgrading from release 89 to 90 core-upgrade-2.17... 91.62% |==========================> | 49.82 MB Giving up: There was no chance to get the file "paks/core-upgrade-2.17-90.ipfire" from any available server. There was an error on the way. Please fix it. PAKFIRE UPGR: core-upgrade-90: Decrypting... core-upgrade-2.17... 91.16% |==========================> | 49.57 MB Giving up: There was no chance to get the file "paks/core-upgrade-2.17-90.ipfire" from any available server. There was an error on the way. Please fix it. sh: /opt/pakfire/cache/core-upgrade-2.17-90.ipfire: No such file or directory tar: This does not look like a tar archive tar: Exiting with failure status due to previous errors ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2015-05-10 12:27 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2015-05-09 14:21 core 90 test download errors Paul Simmons 2015-05-09 22:18 ` Rod Rodolico 2015-05-10 8:08 ` Michael Tremer 2015-05-10 12:27 ` Paul Simmons
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox