* Core 101
@ 2016-05-02 20:52 R. W. Rodolico
2016-05-02 20:55 ` Michael Tremer
0 siblings, 1 reply; 4+ messages in thread
From: R. W. Rodolico @ 2016-05-02 20:52 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 2197 bytes --]
I just got back and saw there was a beta for Core 101. However, when I
went to install it, it said there was no upgrade. I'm assuming I'm doing
something wrong.
Note, it found that upgrades for samba and htop were available, but then
complained it could not find samba. However, it did install it! Weird.
Anyway, do I need to set $version to 2.19-1 or something? pakfire.conf
has $version = "2.19";
Rod
[root(a)xxxx pakfire]# pakfire update --force
server-list.db 100.00% |=============================>| 1.15 KB
packages_list.db 100.00% |=============================>| 3.17 KB
meta-samba 100.00% |=============================>| 340.00 B
meta-htop 100.00% |=============================>| 322.00 B
core-list.db 100.00% |=============================>| 249.00 B
[root(a)xxxx pakfire]# pakfire upgrade
CORE ERROR: No new upgrades available. You are on release 100.
Update: samba
Version: 3.6.25 -> 3.6.25
Release: 60 -> 62
Update: htop
Version: 1.0.3 -> 2.0.1
Release: 7 -> 8
PAKFIRE RESV: samba: Resolving dependencies...
PAKFIRE RESV: samba: Dependency is already installed: cups
PAKFIRE RESV: samba: Dependency is already installed: krb5
PAKFIRE RESV: htop: Resolving dependencies...
PAKFIRE UPGR: We are going to install all packages listed above.
PAKFIRE INFO: Is this okay? [y/N]
y
DOWNLOAD ERROR: There was no chance to get the file
"paks/samba-3.6.25-62.ipfire" from any available server.
May be you should run "pakfire update" to get some new servers.
PAKFIRE UPGR: samba: Decrypting...
samba-3.6.25-62.i... 100.00% |=============================>| 21.43 MB
PAKFIRE UPGR: samba: Upgrading files and running post-upgrading scripts...
PAKFIRE UPGR: samba: Finished.
PAKFIRE UPGR: htop: Decrypting...
PAKFIRE UPGR: htop: Upgrading files and running post-upgrading scripts...
PAKFIRE UPGR: htop: Finished.
DOWNLOAD ERROR: There was no chance to get the file
"paks/samba-3.6.25-62.ipfire" from any available server.
May be you should run "pakfire update" to get some new servers.
PAKFIRE UPGR: samba: Decrypting...
--
Rod Rodolico
Daily Data, Inc.
POB 140465
Dallas TX 75214-0465
214.827.2170
http://www.dailydata.net
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Core 101
2016-05-02 20:52 Core 101 R. W. Rodolico
@ 2016-05-02 20:55 ` Michael Tremer
2016-05-02 23:33 ` R. W. Rodolico
0 siblings, 1 reply; 4+ messages in thread
From: Michael Tremer @ 2016-05-02 20:55 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 2586 bytes --]
Hi,
this behavior is kind of normal since the mirrors are still synchronizing.
Just keep running these commands until you find one that is up to date.
Best,
-Michael
On Mon, 2016-05-02 at 15:52 -0500, R. W. Rodolico wrote:
> I just got back and saw there was a beta for Core 101. However, when I
> went to install it, it said there was no upgrade. I'm assuming I'm doing
> something wrong.
>
> Note, it found that upgrades for samba and htop were available, but then
> complained it could not find samba. However, it did install it! Weird.
>
> Anyway, do I need to set $version to 2.19-1 or something? pakfire.conf
> has $version = "2.19";
>
> Rod
>
> [root(a)xxxx pakfire]# pakfire update --force
> server-list.db 100.00% |=============================>| 1.15 KB
> packages_list.db 100.00% |=============================>| 3.17 KB
> meta-samba 100.00% |=============================>| 340.00 B
> meta-htop 100.00% |=============================>| 322.00 B
> core-list.db 100.00% |=============================>| 249.00 B
> [root(a)xxxx pakfire]# pakfire upgrade
> CORE ERROR: No new upgrades available. You are on release 100.
> Update: samba
> Version: 3.6.25 -> 3.6.25
> Release: 60 -> 62
>
> Update: htop
> Version: 1.0.3 -> 2.0.1
> Release: 7 -> 8
>
> PAKFIRE RESV: samba: Resolving dependencies...
> PAKFIRE RESV: samba: Dependency is already installed: cups
> PAKFIRE RESV: samba: Dependency is already installed: krb5
>
> PAKFIRE RESV: htop: Resolving dependencies...
>
>
> PAKFIRE UPGR: We are going to install all packages listed above.
> PAKFIRE INFO: Is this okay? [y/N]
> y
>
>
>
>
>
> DOWNLOAD ERROR: There was no chance to get the file
> "paks/samba-3.6.25-62.ipfire" from any available server.
> May be you should run "pakfire update" to get some new servers.
> PAKFIRE UPGR: samba: Decrypting...
>
>
>
> samba-3.6.25-62.i... 100.00% |=============================>| 21.43 MB
> PAKFIRE UPGR: samba: Upgrading files and running post-upgrading scripts...
> PAKFIRE UPGR: samba: Finished.
>
> PAKFIRE UPGR: htop: Decrypting...
> PAKFIRE UPGR: htop: Upgrading files and running post-upgrading scripts...
> PAKFIRE UPGR: htop: Finished.
>
>
> DOWNLOAD ERROR: There was no chance to get the file
> "paks/samba-3.6.25-62.ipfire" from any available server.
> May be you should run "pakfire update" to get some new servers.
> PAKFIRE UPGR: samba: Decrypting...
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Core 101
2016-05-02 20:55 ` Michael Tremer
@ 2016-05-02 23:33 ` R. W. Rodolico
2016-05-03 10:31 ` Michael Tremer
0 siblings, 1 reply; 4+ messages in thread
From: R. W. Rodolico @ 2016-05-02 23:33 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 3134 bytes --]
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Sorry, just saw that 101 was released. I thought I was going into
testing. After I got your reply, I saw our mirror was still syncing so
I realized what was going on.
Sorry I didn't test this one; been out of town.
Rod
On 05/02/2016 03:55 PM, Michael Tremer wrote:
> Hi,
>
> this behavior is kind of normal since the mirrors are still
> synchronizing.
>
> Just keep running these commands until you find one that is up to
> date.
>
> Best, -Michael
>
> On Mon, 2016-05-02 at 15:52 -0500, R. W. Rodolico wrote:
>> I just got back and saw there was a beta for Core 101. However,
>> when I went to install it, it said there was no upgrade. I'm
>> assuming I'm doing something wrong.
>>
>> Note, it found that upgrades for samba and htop were available,
>> but then complained it could not find samba. However, it did
>> install it! Weird.
>>
>> Anyway, do I need to set $version to 2.19-1 or something?
>> pakfire.conf has $version = "2.19";
>>
>> Rod
>>
>> [root(a)xxxx pakfire]# pakfire update --force server-list.db
>> 100.00% |=============================>| 1.15 KB
>> packages_list.db 100.00% |=============================>|
>> 3.17 KB meta-samba 100.00%
>> |=============================>| 340.00 B meta-htop 100.00%
>> |=============================>| 322.00 B core-list.db 100.00%
>> |=============================>| 249.00 B [root(a)xxxx pakfire]#
>> pakfire upgrade CORE ERROR: No new upgrades available. You are on
>> release 100. Update: samba Version: 3.6.25 -> 3.6.25 Release: 60
>> -> 62
>>
>> Update: htop Version: 1.0.3 -> 2.0.1 Release: 7 -> 8
>>
>> PAKFIRE RESV: samba: Resolving dependencies... PAKFIRE RESV:
>> samba: Dependency is already installed: cups PAKFIRE RESV:
>> samba: Dependency is already installed: krb5
>>
>> PAKFIRE RESV: htop: Resolving dependencies...
>>
>>
>> PAKFIRE UPGR: We are going to install all packages listed above.
>> PAKFIRE INFO: Is this okay? [y/N] y
>>
>>
>>
>>
>>
>> DOWNLOAD ERROR: There was no chance to get the file
>> "paks/samba-3.6.25-62.ipfire" from any available server. May be
>> you should run "pakfire update" to get some new servers. PAKFIRE
>> UPGR: samba: Decrypting...
>>
>>
>>
>> samba-3.6.25-62.i... 100.00% |=============================>|
>> 21.43 MB PAKFIRE UPGR: samba: Upgrading files and running
>> post-upgrading scripts... PAKFIRE UPGR: samba: Finished.
>>
>> PAKFIRE UPGR: htop: Decrypting... PAKFIRE UPGR: htop: Upgrading
>> files and running post-upgrading scripts... PAKFIRE UPGR: htop:
>> Finished.
>>
>>
>> DOWNLOAD ERROR: There was no chance to get the file
>> "paks/samba-3.6.25-62.ipfire" from any available server. May be
>> you should run "pakfire update" to get some new servers. PAKFIRE
>> UPGR: samba: Decrypting...
- --
Rod Rodolico
Daily Data, Inc.
POB 140465
Dallas TX 75214-0465
214.827.2170
http://www.dailydata.net
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iEYEARECAAYFAlcn490ACgkQuVY3UpYMlTSH0ACfbtbSQKMZIc8p/Kohx6w/wBNX
2dIAmwdAf60tVCIprxw+Hj6GQCPL+R4T
=viV7
-----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Core 101
2016-05-02 23:33 ` R. W. Rodolico
@ 2016-05-03 10:31 ` Michael Tremer
0 siblings, 0 replies; 4+ messages in thread
From: Michael Tremer @ 2016-05-03 10:31 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 3216 bytes --]
On Mon, 2016-05-02 at 18:33 -0500, R. W. Rodolico wrote:
> Sorry, just saw that 101 was released. I thought I was going into
> testing. After I got your reply, I saw our mirror was still syncing so
> I realized what was going on.
>
> Sorry I didn't test this one; been out of town.
No worries. There will be an other one up later today for testing :)
-Michael
>
> Rod
>
> On 05/02/2016 03:55 PM, Michael Tremer wrote:
> >
> > Hi,
> >
> > this behavior is kind of normal since the mirrors are still
> > synchronizing.
> >
> > Just keep running these commands until you find one that is up to
> > date.
> >
> > Best, -Michael
> >
> > On Mon, 2016-05-02 at 15:52 -0500, R. W. Rodolico wrote:
> > >
> > > I just got back and saw there was a beta for Core 101. However,
> > > when I went to install it, it said there was no upgrade. I'm
> > > assuming I'm doing something wrong.
> > >
> > > Note, it found that upgrades for samba and htop were available,
> > > but then complained it could not find samba. However, it did
> > > install it! Weird.
> > >
> > > Anyway, do I need to set $version to 2.19-1 or something?
> > > pakfire.conf has $version = "2.19";
> > >
> > > Rod
> > >
> > > [root(a)xxxx pakfire]# pakfire update --force server-list.db
> > > 100.00% |=============================>| 1.15 KB
> > > packages_list.db 100.00% |=============================>|
> > > 3.17 KB meta-samba 100.00%
> > > >
> > > > =============================>| 340.00 B meta-htop 100.00%
> > > > =============================>| 322.00 B core-list.db 100.00%
> > > > =============================>| 249.00 B [root(a)xxxx pakfire]#
> > > pakfire upgrade CORE ERROR: No new upgrades available. You are on
> > > release 100. Update: samba Version: 3.6.25 -> 3.6.25 Release: 60
> > > -> 62
> > >
> > > Update: htop Version: 1.0.3 -> 2.0.1 Release: 7 -> 8
> > >
> > > PAKFIRE RESV: samba: Resolving dependencies... PAKFIRE RESV:
> > > samba: Dependency is already installed: cups PAKFIRE RESV:
> > > samba: Dependency is already installed: krb5
> > >
> > > PAKFIRE RESV: htop: Resolving dependencies...
> > >
> > >
> > > PAKFIRE UPGR: We are going to install all packages listed above.
> > > PAKFIRE INFO: Is this okay? [y/N] y
> > >
> > >
> > >
> > >
> > >
> > > DOWNLOAD ERROR: There was no chance to get the file
> > > "paks/samba-3.6.25-62.ipfire" from any available server. May be
> > > you should run "pakfire update" to get some new servers. PAKFIRE
> > > UPGR: samba: Decrypting...
> > >
> > >
> > >
> > > samba-3.6.25-62.i... 100.00% |=============================>|
> > > 21.43 MB PAKFIRE UPGR: samba: Upgrading files and running
> > > post-upgrading scripts... PAKFIRE UPGR: samba: Finished.
> > >
> > > PAKFIRE UPGR: htop: Decrypting... PAKFIRE UPGR: htop: Upgrading
> > > files and running post-upgrading scripts... PAKFIRE UPGR: htop:
> > > Finished.
> > >
> > >
> > > DOWNLOAD ERROR: There was no chance to get the file
> > > "paks/samba-3.6.25-62.ipfire" from any available server. May be
> > > you should run "pakfire update" to get some new servers. PAKFIRE
> > > UPGR: samba: Decrypting...
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-05-03 10:31 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-05-02 20:52 Core 101 R. W. Rodolico
2016-05-02 20:55 ` Michael Tremer
2016-05-02 23:33 ` R. W. Rodolico
2016-05-03 10:31 ` Michael Tremer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox