[PATCH] iproute2: update to 4.6.0

[PATCH] iproute2: update to 4.6.0

[Marcel Lorenz]

[-- Attachment #1: Type: text/plain, Size: 11331 bytes --]

The patch removes the not more needed arpd binary

Signed-off-by: Marcel Lorenz <marcel.lorenz(a)ipfire.org>
---
 config/rootfiles/common/iproute2             |  37 +++++-
 lfs/iproute2                                 |   5 +-
 src/patches/iproute2-4.6.0_remove_arpd.patch | 176 +++++++++++++++++++++++++++
 3 files changed, 212 insertions(+), 6 deletions(-)
 create mode 100644 src/patches/iproute2-4.6.0_remove_arpd.patch

diff --git a/config/rootfiles/common/iproute2 b/config/rootfiles/common/iproute2
index 93dcaff..31649dd 100644
--- a/config/rootfiles/common/iproute2
+++ b/config/rootfiles/common/iproute2
@@ -1,4 +1,5 @@
 #etc/iproute2
+etc/iproute2/bpf_pinning
 etc/iproute2/ematch_map
 etc/iproute2/group
 etc/iproute2/nl_protos
@@ -28,11 +29,13 @@ sbin/tc
 #usr/lib/tc/normal.dist
 #usr/lib/tc/pareto.dist
 #usr/lib/tc/paretonormal.dist
-usr/sbin/arpd
+#usr/sbin/arpd
+#usr/share/bash-completion
+#usr/share/bash-completion/completions
+usr/share/bash-completion/completions/tc
 #usr/share/doc/iproute2
 #usr/share/doc/iproute2/SNAPSHOT.tex
 #usr/share/doc/iproute2/api-ip6-flowlabels.tex
-#usr/share/doc/iproute2/arpd.sgml
 #usr/share/doc/iproute2/examples
 #usr/share/doc/iproute2/examples/README.cbq
 #usr/share/doc/iproute2/examples/README.iproute2+tc
@@ -60,9 +63,9 @@ usr/sbin/arpd
 #usr/share/doc/iproute2/preamble.tex
 #usr/share/doc/iproute2/rtstat.sgml
 #usr/share/doc/iproute2/ss.sgml
+#usr/share/doc/iproute2/tc-filters.tex
 #usr/share/man/man3/libnetlink.3
 #usr/share/man/man7/tc-hfsc.7
-#usr/share/man/man8/arpd.8
 #usr/share/man/man8/bridge.8
 #usr/share/man/man8/ctstat.8
 #usr/share/man/man8/ip-address.8
@@ -91,29 +94,55 @@ usr/sbin/arpd
 #usr/share/man/man8/routel.8
 #usr/share/man/man8/rtacct.8
 #usr/share/man/man8/rtmon.8
+#usr/share/man/man8/rtpr.8
 #usr/share/man/man8/rtstat.8
 #usr/share/man/man8/ss.8
+#usr/share/man/man8/tc-basic.8
 #usr/share/man/man8/tc-bfifo.8
 #usr/share/man/man8/tc-bpf.8
 #usr/share/man/man8/tc-cbq-details.8
 #usr/share/man/man8/tc-cbq.8
+#usr/share/man/man8/tc-cgroup.8
 #usr/share/man/man8/tc-choke.8
 #usr/share/man/man8/tc-codel.8
+#usr/share/man/man8/tc-connmark.8
+#usr/share/man/man8/tc-csum.8
 #usr/share/man/man8/tc-drr.8
 #usr/share/man/man8/tc-ematch.8
+#usr/share/man/man8/tc-flow.8
+#usr/share/man/man8/tc-flower.8
+#usr/share/man/man8/tc-fq.8
 #usr/share/man/man8/tc-fq_codel.8
+#usr/share/man/man8/tc-fw.8
 #usr/share/man/man8/tc-hfsc.8
 #usr/share/man/man8/tc-htb.8
+#usr/share/man/man8/tc-mirred.8
 #usr/share/man/man8/tc-mqprio.8
+#usr/share/man/man8/tc-nat.8
 #usr/share/man/man8/tc-netem.8
+#usr/share/man/man8/tc-pedit.8
 #usr/share/man/man8/tc-pfifo.8
 #usr/share/man/man8/tc-pfifo_fast.8
 #usr/share/man/man8/tc-pie.8
+#usr/share/man/man8/tc-police.8
 #usr/share/man/man8/tc-prio.8
 #usr/share/man/man8/tc-red.8
+#usr/share/man/man8/tc-route.8
 #usr/share/man/man8/tc-sfb.8
 #usr/share/man/man8/tc-sfq.8
+#usr/share/man/man8/tc-simple.8
+#usr/share/man/man8/tc-skbedit.8
 #usr/share/man/man8/tc-stab.8
 #usr/share/man/man8/tc-tbf.8
+#usr/share/man/man8/tc-tcindex.8
+#usr/share/man/man8/tc-u32.8
+#usr/share/man/man8/tc-vlan.8
+#usr/share/man/man8/tc-xt.8
 #usr/share/man/man8/tc.8
-var/lib/arpd
+#usr/share/man/man8/tipc-bearer.8
+#usr/share/man/man8/tipc-link.8
+#usr/share/man/man8/tipc-media.8
+#usr/share/man/man8/tipc-nametable.8
+#usr/share/man/man8/tipc-node.8
+#usr/share/man/man8/tipc-socket.8
+#usr/share/man/man8/tipc.8
diff --git a/lfs/iproute2 b/lfs/iproute2
index 51f1f3d..4cb359f 100644
--- a/lfs/iproute2
+++ b/lfs/iproute2
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 4.2.0
+VER        = 4.6.0
 
 THISAPP    = iproute2-$(VER)
 DL_FILE    = $(THISAPP).tar.xz
@@ -40,7 +40,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE)             = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_MD5         = 51c54cc3245eff451154938fbc0f64f5
+$(DL_FILE)_MD5         = d015e437e4f744d51d3a1a53341826d5
 
 install : $(TARGET)
 
@@ -70,6 +70,7 @@ $(subst %,%_MD5,$(objects)) :
 $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
 	@$(PREBUILD)
 	@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
+	cd $(DIR_APP) && cd $(DIR_APP) && patch -Np1 < $(DIR_SRC)/src/patches/$(THISAPP)_remove_arpd.patch
 	cd $(DIR_APP) && make $(MAKETUNING) SBINDIR=/sbin
 	cd $(DIR_APP) && make SBINDIR=/sbin install
 	cd $(DIR_APP) && mv -v /sbin/arpd /usr/sbin
diff --git a/src/patches/iproute2-4.6.0_remove_arpd.patch b/src/patches/iproute2-4.6.0_remove_arpd.patch
new file mode 100644
index 0000000..66d9327
--- /dev/null
+++ b/src/patches/iproute2-4.6.0_remove_arpd.patch
@@ -0,0 +1,176 @@
+diff -Naur a/doc/arpd.sgml b/doc/arpd.sgml
+--- a/doc/arpd.sgml	2016-01-11 16:33:03.000000000 +0000
++++ b/doc/arpd.sgml	1970-01-01 00:00:00.000000000 +0000
+@@ -1,130 +0,0 @@
+-<!doctype linuxdoc system>
+-
+-<article>
+-
+-<title>ARPD Daemon
+-<author>Alexey Kuznetsov, <tt/kuznet(a)ms2.inr.ac.ru/
+-<date>some_negative_number, 20 Sep 2001
+-<abstract>
+-<tt/arpd/ is daemon collecting gratuitous ARP information, saving
+-it on local disk and feeding it to kernel on demand to avoid
+-redundant broadcasting due to limited size of kernel ARP cache. 
+-</abstract>
+-
+-
+-<p><bf/Description/
+-
+-<p>The format of the command is:
+-
+-<tscreen><verb>
+-       arpd OPTIONS [ INTERFACE [ INTERFACE ... ] ]
+-</verb></tscreen>
+-
+-<p> <tt/OPTIONS/ are:
+-
+-<itemize>
+-
+-<item><tt/-l/ - dump <tt/arpd/ database to stdout and exit. Output consists
+-of three columns: interface index, IP address and MAC address.
+-Negative entries for dead hosts are also shown, in this case MAC address
+-is replaced by word <tt/FAILED/ followed by colon and time when the fact
+-that host is dead was proven the last time.
+-
+-<item><tt/-f FILE/  - read and load <tt/arpd/ database from <tt/FILE/
+-in text format similar dumped by option <tt/-l/. Exit after load,
+-probably listing resulting database, if option <tt/-l/ is also given.
+-If <tt/FILE/ is <tt/-/, <tt/stdin/ is read to get ARP table.
+- 
+-<item><tt/-b DATABASE/  - location of database file. Default location is
+-<tt>/var/lib/arpd/arpd.db</tt>.
+-
+-<item><tt/-a NUMBER/ - <tt/arpd/ not only passively listens ARP on wire, but
+-also send brodcast queries itself. <tt/NUMBER/ is number of such queries
+-to make before destination is considered as dead. When <tt/arpd/ is started
+-as kernel helper (i.e. with <tt/app_solicit/ enabled in <tt/sysctl/
+-or even with option <tt/-k/) without this option and still did not learn enough
+-information, you can observe 1 second gaps in service. Not fatal, but
+-not good.
+-
+-<item><tt/-k/ - suppress sending broadcast queries by kernel. It takes
+-sense together with option <tt/-a/.
+-
+-<item><tt/-n TIME/ - timeout of negative cache. When resolution fails <tt/arpd/
+-suppresses further attempts to resolve for this period. It makes sense
+-only together with option <tt/-k/. This timeout should not be too much
+-longer than boot time of a typical host not supporting gratuitous ARP.
+-Default value is 60 seconds.
+-
+-<item><tt/-R RATE/ - maximal steady rate of broadcasts sent by <tt/arpd/
+-in packets per second. Default value is 1.
+-
+-<item><tt/-B NUMBER/ - number of broadcasts sent by <tt/arpd/ back to back.
+-Default value is 3. Together with option <tt/-R/ this option allows
+-to police broadcasting not to exceed <tt/B+R*T/ over any interval
+-of time <tt/T/.
+-
+-</itemize>
+-
+-<p><tt/INTERFACE/ is name of networking inteface to watch.
+-If no interfaces given, <tt/arpd/ monitors all the interfaces.
+-In this case <tt/arpd/ does not adjust <tt/sysctl/ parameters,
+-it is supposed user does this himself after <tt/arpd/ is started.
+-
+-
+-<p> Signals
+-
+-<p> <tt/arpd/ exits gracefully syncing database and restoring adjusted
+-<tt/sysctl/ parameters, when receives <tt/SIGINT/ or <tt/SIGTERM/.
+-<tt/SIGHUP/ syncs database to disk. <tt/SIGUSR1/ sends some statistics
+-to <tt/syslog/. Effect of another signals is undefined, they may corrupt
+-database and leave <tt/sysctl/ parameters in an unpredictable state.
+-
+-<p> Note
+-
+-<p> In order to <tt/arpd/ be able to serve as ARP resolver, kernel must be
+-compiled with the option <tt/CONFIG_ARPD/ and, in the case when interface list
+-is not given on command line, variable <tt/app_solicit/
+-on interfaces of interest should be set in <tt>/proc/sys/net/ipv4/neigh/*</tt>.
+-If this is not made <tt/arpd/ still collects gratuitous ARP information
+-in its database.
+-
+-<p> Examples
+-
+-<enum>
+-<item> Start <tt/arpd/ to collect gratuitous ARP, but not messing
+-with kernel functionality:
+-
+-<tscreen><verb>
+-   arpd -b /var/tmp/arpd.db
+-</verb></tscreen>
+-
+-<item> Look at result after some time:
+-
+-<tscreen><verb>
+-   killall arpd
+-   arpd -l -b /var/tmp/arpd.db
+-</verb></tscreen>
+-
+-<item> To enable kernel helper, leaving leading role to kernel:
+-
+-<tscreen><verb>
+-   arpd -b /var/tmp/arpd.db -a 1 eth0 eth1
+-</verb></tscreen>
+-
+-<item> Completely replace kernel resolution on interfaces <tt/eth0/
+-and <tt/eth1/. In this case kernel still does unicast probing to
+-validate entries, but all the broadcast activity is suppressed
+-and made under authority of <tt/arpd/: 
+-
+-<tscreen><verb>
+-   arpd -b /var/tmp/arpd.db -a 3 -k eth0 eth1
+-</verb></tscreen>
+-
+-This is mode which <tt/arpd/ is supposed to work normally.
+-It is not default just to prevent occasional enabling of too aggressive
+-mode occasionally.
+-
+-</enum>
+-
+-</article>
+-
+diff -Naur a/Makefile b/Makefile
+--- a/Makefile	2016-01-11 16:33:03.000000000 +0000
++++ b/Makefile	2016-05-22 11:56:04.765521406 +0000
+@@ -5,7 +5,6 @@
+ DATADIR?=$(PREFIX)/share
+ DOCDIR?=$(DATADIR)/doc/iproute2
+ MANDIR?=$(DATADIR)/man
+-ARPDDIR?=/var/lib/arpd
+ KERNEL_INCLUDE?=/usr/include
+ 
+ # Path to db_185.h include
+@@ -57,7 +56,6 @@
+ install: all
+ 	install -m 0755 -d $(DESTDIR)$(SBINDIR)
+ 	install -m 0755 -d $(DESTDIR)$(CONFDIR)
+-	install -m 0755 -d $(DESTDIR)$(ARPDDIR)
+ 	install -m 0755 -d $(DESTDIR)$(DOCDIR)/examples
+ 	install -m 0755 -d $(DESTDIR)$(DOCDIR)/examples/diffserv
+ 	install -m 0644 README.iproute2+tc $(shell find examples -maxdepth 1 -type f) \
+diff -Naur a/man/man8/Makefile b/man/man8/Makefile
+--- a/man/man8/Makefile	2016-01-11 16:33:03.000000000 +0000
++++ b/man/man8/Makefile	2016-05-22 11:56:11.093521545 +0000
+@@ -1,6 +1,6 @@
+ TARGETS = ip-address.8 ip-link.8 ip-route.8
+ 
+-MAN8PAGES = $(TARGETS) ip.8 arpd.8 lnstat.8 routel.8 rtacct.8 rtmon.8 rtpr.8 ss.8 \
++MAN8PAGES = $(TARGETS) ip.8  lnstat.8 routel.8 rtacct.8 rtmon.8 rtpr.8 ss.8 \
+ 	tc.8 tc-bfifo.8 tc-bpf.8 tc-cbq.8 tc-cbq-details.8 tc-choke.8 tc-codel.8 \
+ 	tc-fq.8 \
+ 	tc-drr.8 tc-ematch.8 tc-fq_codel.8 tc-hfsc.8 tc-htb.8 tc-pie.8 \
+diff -Naur a/tc/Makefile b/tc/Makefile
+--- a/tc/Makefile	2016-01-11 16:33:03.000000000 +0000
++++ b/tc/Makefile	2016-05-22 11:56:29.493521950 +0000
+@@ -87,7 +87,7 @@
+ 	CFLAGS += -DTC_CONFIG_XT_H
+ 	TCSO += m_xt_old.so
+     else
+-      TCMODULES += m_ipt.o
++      TCMODULES += 
+     endif
+   endif
+ endif
-- 
1.9.1