* [PATCH] ntp: Do not use an RPATH.
@ 2016-10-21 11:11 Stefan Schantl
2016-10-21 13:08 ` Michael Tremer
0 siblings, 1 reply; 5+ messages in thread
From: Stefan Schantl @ 2016-10-21 11:11 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 693 bytes --]
Fixes #11243.
Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org>
---
ntp/ntp.nm | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/ntp/ntp.nm b/ntp/ntp.nm
index 780ad01..ad4b046 100644
--- a/ntp/ntp.nm
+++ b/ntp/ntp.nm
@@ -6,7 +6,7 @@
name = ntp
version = %{ver_major}.8
ver_major = 4.2
-release = 2
+release = 3
groups = System/Daemons
url = http://www.ntp.org/
@@ -49,6 +49,7 @@ build
configure_options += \
--sysconfdir=%{sysconfdir}/ntp/crypto \
--with-openssl-libdir=%{libdir} \
+ --without-rpath \
--enable-all-clocks \
--enable-parse-clocks \
--enable-ntp-signd=%{localstatedir}/run/ntp_signd
--
2.7.4
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] ntp: Do not use an RPATH.
2016-10-21 11:11 [PATCH] ntp: Do not use an RPATH Stefan Schantl
@ 2016-10-21 13:08 ` Michael Tremer
2016-10-28 11:26 ` Stefan Schantl
0 siblings, 1 reply; 5+ messages in thread
From: Michael Tremer @ 2016-10-21 13:08 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 1774 bytes --]
This won't compile...
Applying patches...
Applying /usr/src/packages/ntp-4.2.8-3.ip3.src/patches/ntpstat-0.2-1-clksrc.patch (-N -p1)...
can't find file to patch at input line 4
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|diff -up ntp-4.2.4p7/ntpstat-0.2/ntpstat.c.ntpstat ntp-4.2.4p7/ntpstat-0.2/ntpstat.c
|--- ntp-4.2.4p7/ntpstat-0.2/ntpstat.c.ntpstat 2002-06-10 08:02:12.000000000 +0200
|+++ ntp-4.2.4p7/ntpstat-0.2/ntpstat.c 2009-07-20 12:22:35.000000000 +0200
--------------------------
File to patch:
Skip this patch? [y]
Skipping patch.
1 out of 1 hunk ignored
Command exited with an error: ['bash', '--login', '-c', '/tmp/tmpaBqkiM']
An error has occured when running Pakfire.
Error message:
BuildError: An unhandled error occured.
Further description:
Build command has failed.
On Fri, 2016-10-21 at 13:11 +0200, Stefan Schantl wrote:
> Fixes #11243.
>
> Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org>
> ---
> ntp/ntp.nm | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/ntp/ntp.nm b/ntp/ntp.nm
> index 780ad01..ad4b046 100644
> --- a/ntp/ntp.nm
> +++ b/ntp/ntp.nm
> @@ -6,7 +6,7 @@
> name = ntp
> version = %{ver_major}.8
> ver_major = 4.2
> -release = 2
> +release = 3
>
> groups = System/Daemons
> url = http://www.ntp.org/
> @@ -49,6 +49,7 @@ build
> configure_options += \
> --sysconfdir=%{sysconfdir}/ntp/crypto \
> --with-openssl-libdir=%{libdir} \
> + --without-rpath \
> --enable-all-clocks \
> --enable-parse-clocks \
> --enable-ntp-signd=%{localstatedir}/run/ntp_signd
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] ntp: Do not use an RPATH.
2016-10-21 13:08 ` Michael Tremer
@ 2016-10-28 11:26 ` Stefan Schantl
2017-01-12 9:30 ` Stefan Schantl
0 siblings, 1 reply; 5+ messages in thread
From: Stefan Schantl @ 2016-10-28 11:26 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 1971 bytes --]
Hello Michael,
tested with "pakfire-builder build ntp.nm -m release" and worked fine.
Best regards,
-Stefan
> This won't compile...
>
> Applying patches...
> Applying /usr/src/packages/ntp-4.2.8-3.ip3.src/patches/ntpstat-0.2-
> 1-clksrc.patch (-N -p1)...
> can't find file to patch at input line 4
> Perhaps you used the wrong -p or --strip option?
> The text leading up to this was:
> --------------------------
> >
> > diff -up ntp-4.2.4p7/ntpstat-0.2/ntpstat.c.ntpstat ntp-
> > 4.2.4p7/ntpstat-0.2/ntpstat.c
> > --- ntp-4.2.4p7/ntpstat-0.2/ntpstat.c.ntpstat 2002-06-10
> > 08:02:12.000000000 +0200
> > +++ ntp-4.2.4p7/ntpstat-0.2/ntpstat.c 2009-07-20
> > 12:22:35.000000000 +0200
> --------------------------
> File to patch:
> Skip this patch? [y]
> Skipping patch.
> 1 out of 1 hunk ignored
> Command exited with an error: ['bash', '--login', '-c',
> '/tmp/tmpaBqkiM']
>
> An error has occured when running Pakfire.
>
> Error message:
> BuildError: An unhandled error occured.
>
> Further description:
> Build command has failed.
>
> On Fri, 2016-10-21 at 13:11 +0200, Stefan Schantl wrote:
> >
> > Fixes #11243.
> >
> > Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org>
> > ---
> > ntp/ntp.nm | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/ntp/ntp.nm b/ntp/ntp.nm
> > index 780ad01..ad4b046 100644
> > --- a/ntp/ntp.nm
> > +++ b/ntp/ntp.nm
> > @@ -6,7 +6,7 @@
> > name = ntp
> > version = %{ver_major}.8
> > ver_major = 4.2
> > -release = 2
> > +release = 3
> >
> > groups = System/Daemons
> > url = http://www.ntp.org/
> > @@ -49,6 +49,7 @@ build
> > configure_options += \
> > --sysconfdir=%{sysconfdir}/ntp/crypto \
> > --with-openssl-libdir=%{libdir} \
> > + --without-rpath \
> > --enable-all-clocks \
> > --enable-parse-clocks \
> > --enable-ntp-signd=%{localstatedir}/run/ntp_signd
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] ntp: Do not use an RPATH.
2016-10-28 11:26 ` Stefan Schantl
@ 2017-01-12 9:30 ` Stefan Schantl
2017-01-12 9:32 ` [PATCHv2] ntp: Do not use a RPATH Stefan Schantl
0 siblings, 1 reply; 5+ messages in thread
From: Stefan Schantl @ 2017-01-12 9:30 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 2282 bytes --]
Since the git tree and the ntp file has been altered, the patch does
not aplly anymore. I'll send a new one which can be applied.
Best regards,
-Stefan
> Hello Michael,
>
> tested with "pakfire-builder build ntp.nm -m release" and worked
> fine.
>
> Best regards,
>
> -Stefan
> > This won't compile...
> >
> > Applying patches...
> > Applying /usr/src/packages/ntp-4.2.8-3.ip3.src/patches/ntpstat-
> > 0.2-
> > 1-clksrc.patch (-N -p1)...
> > can't find file to patch at input line 4
> > Perhaps you used the wrong -p or --strip option?
> > The text leading up to this was:
> > --------------------------
> > >
> > > diff -up ntp-4.2.4p7/ntpstat-0.2/ntpstat.c.ntpstat ntp-
> > > 4.2.4p7/ntpstat-0.2/ntpstat.c
> > > --- ntp-4.2.4p7/ntpstat-0.2/ntpstat.c.ntpstat 2002-06-10
> > > 08:02:12.000000000 +0200
> > > +++ ntp-4.2.4p7/ntpstat-0.2/ntpstat.c 2009-07-20
> > > 12:22:35.000000000 +0200
> >
> > --------------------------
> > File to patch:
> > Skip this patch? [y]
> > Skipping patch.
> > 1 out of 1 hunk ignored
> > Command exited with an error: ['bash', '--login', '-c',
> > '/tmp/tmpaBqkiM']
> >
> > An error has occured when running Pakfire.
> >
> > Error message:
> > BuildError: An unhandled error occured.
> >
> > Further description:
> > Build command has failed.
> >
> > On Fri, 2016-10-21 at 13:11 +0200, Stefan Schantl wrote:
> > >
> > > Fixes #11243.
> > >
> > > Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org>
> > > ---
> > > ntp/ntp.nm | 3 ++-
> > > 1 file changed, 2 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/ntp/ntp.nm b/ntp/ntp.nm
> > > index 780ad01..ad4b046 100644
> > > --- a/ntp/ntp.nm
> > > +++ b/ntp/ntp.nm
> > > @@ -6,7 +6,7 @@
> > > name = ntp
> > > version = %{ver_major}.8
> > > ver_major = 4.2
> > > -release = 2
> > > +release = 3
> > >
> > > groups = System/Daemons
> > > url = http://www.ntp.org/
> > > @@ -49,6 +49,7 @@ build
> > > configure_options += \
> > > --sysconfdir=%{sysconfdir}/ntp/crypto \
> > > --with-openssl-libdir=%{libdir} \
> > > + --without-rpath \
> > > --enable-all-clocks \
> > > --enable-parse-clocks \
> > > --enable-ntp-
> > > signd=%{localstatedir}/run/ntp_signd
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCHv2] ntp: Do not use a RPATH
2017-01-12 9:30 ` Stefan Schantl
@ 2017-01-12 9:32 ` Stefan Schantl
0 siblings, 0 replies; 5+ messages in thread
From: Stefan Schantl @ 2017-01-12 9:32 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 735 bytes --]
Fixes #11243.
Signed-off-by: Stefan Schantl <stefan.schantl(a)ipfire.org>
---
ntp/ntp.nm | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/ntp/ntp.nm b/ntp/ntp.nm
index 7f8f171..a82920c 100644
--- a/ntp/ntp.nm
+++ b/ntp/ntp.nm
@@ -6,7 +6,7 @@
name = ntp
version = %{ver_major}.8
ver_major = 4.2
-release = 3
+release = 4
groups = System/Daemons
url = http://www.ntp.org/
@@ -43,7 +43,8 @@ build
--sysconfdir=%{sysconfdir}/ntp/crypto \
--enable-all-clocks \
--enable-parse-clocks \
- --enable-ntp-signd=%{localstatedir}/run/ntp_signd
+ --enable-ntp-signd=%{localstatedir}/run/ntp_signd \
+ --without-rpath
make_install_targets += bindir=%{sbindir}
--
2.9.3
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-01-12 9:32 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-10-21 11:11 [PATCH] ntp: Do not use an RPATH Stefan Schantl
2016-10-21 13:08 ` Michael Tremer
2016-10-28 11:26 ` Stefan Schantl
2017-01-12 9:30 ` Stefan Schantl
2017-01-12 9:32 ` [PATCHv2] ntp: Do not use a RPATH Stefan Schantl
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox