Python3

Python3

[Jonatan Schlag]

[-- Attachment #1: Type: text/plain, Size: 314 bytes --]

Hi,
the following patches include python3 in ipfire. 

Unfortunately, the flash image build no more. The build fails with a 
tar 
error complaining about to less disk space. I did not found out what the 
problem is, so somebody else has to investigate time into this problem 
to find a solution.

Regards Jonatan

[PATCH 1/2] Prepare for python3

[Jonatan Schlag]

[-- Attachment #1: Type: text/plain, Size: 795 bytes --]

The build of ipaadr fails with python3 because two possibilities of
/usr/lib/python* are availible. This patch set the path to
/usr/lib/python2* to make the path clear.

Signed-off-by: Jonatan Schlag <jonatan.schlag(a)ipfire.org>
---
 lfs/ipaddr | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lfs/ipaddr b/lfs/ipaddr
index 4b74e02..186141c 100644
--- a/lfs/ipaddr
+++ b/lfs/ipaddr
@@ -70,7 +70,7 @@ $(subst %,%_MD5,$(objects)) :
 $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
 	@$(PREBUILD)
 	@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE)
-	cd $(DIR_APP) && install -m 0644 ipaddr.py /usr/lib/python*
+	cd $(DIR_APP) && install -m 0644 ipaddr.py /usr/lib/python2*
 	/usr/bin/python -c "import ipaddr"
 	@rm -rf $(DIR_APP)
 	@$(POSTBUILD)
-- 
2.1.4

Re: Python3

[Michael Tremer]

[-- Attachment #1: Type: text/plain, Size: 1186 bytes --]

Hi,

thank you for submitting this.

I merged this and for me, the flash image couldn't be generated either. The
reason for that is that we allocate a partition of a fixed size (which is
~700MB) right now. The system is extracted onto that partition and all is put
into the image which then is small enough to fit on a 1GB storage device. As
soon as the system boots up for the first time, it increases the partition to
maximum size.

However, with adding Python 3 to the core system, it didn't fit into the 700MB
any more. I therefore made it an add-on package which is still rather huge
(~20MB). Is there any requirement this should be in the core distribution? AFAIK
nothing is using this by default, hence it could easily be an add-on.

Best,
-Michael

On Mon, 2017-01-23 at 16:17 +0100, Jonatan Schlag wrote:
> Hi,
> the following patches include python3 in ipfire. 
> 
> Unfortunately, the flash image build no more. The build fails with a 
> tar 
> error complaining about to less disk space. I did not found out what the 
> problem is, so somebody else has to investigate time into this problem 
> to find a solution.
> 
> Regards Jonatan
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: Python3

[Matthias Fischer]

[-- Attachment #1: Type: text/plain, Size: 2443 bytes --]

Hi,

sorry guys, but this won't build here:

Its always (_build.packages.log):

...
Jan 28 00:04:45: Building python3 Python-3.6.0.tar.xz checksum OK
+ cd /usr/src/lfs
+ make -f python3 LFS_BASEDIR=/usr/src dist
'/usr/src/config/rootfiles/packages/i586/python3' ->
'/install/packages/package/ROOTFILES'
tar:
usr/lib/python3.6/__pycache__/_sysconfigdata_m_linux_x86_64-linux-gnu.cpython-36.opt-1.pyc:
Cannot stat: No such file or directory
tar:
usr/lib/python3.6/__pycache__/_sysconfigdata_m_linux_x86_64-linux-gnu.cpython-36.opt-2.pyc:
Cannot stat: No such file or directory
tar:
usr/lib/python3.6/__pycache__/_sysconfigdata_m_linux_x86_64-linux-gnu.cpython-36.pyc:
Cannot stat: No such file or directory
tar: usr/lib/python3.6/_sysconfigdata_m_linux_x86_64-linux-gnu.py:
Cannot stat: No such file or directory
... and so on ...

E.g., script is searching for:

_sysconfigdata_m_linux_x86_64-linux-gnu.cpython-36.opt-1.pyc
                       ^^^^^^
It builds:

_sysconfigdata_m_linux_i386-linux-gnu.cpython-36.opt-1.pyc
                       ^^^^
"Fixes for rootfile" (or something similar?) needed!?

Best,
Matthias

On 27.01.2017 13:33, Michael Tremer wrote:
> Hi,
> 
> thank you for submitting this.
> 
> I merged this and for me, the flash image couldn't be generated either. The
> reason for that is that we allocate a partition of a fixed size (which is
> ~700MB) right now. The system is extracted onto that partition and all is put
> into the image which then is small enough to fit on a 1GB storage device. As
> soon as the system boots up for the first time, it increases the partition to
> maximum size.
> 
> However, with adding Python 3 to the core system, it didn't fit into the 700MB
> any more. I therefore made it an add-on package which is still rather huge
> (~20MB). Is there any requirement this should be in the core distribution? AFAIK
> nothing is using this by default, hence it could easily be an add-on.
> 
> Best,
> -Michael
> 
> On Mon, 2017-01-23 at 16:17 +0100, Jonatan Schlag wrote:
>> Hi,
>> the following patches include python3 in ipfire. 
>> 
>> Unfortunately, the flash image build no more. The build fails with a 
>> tar 
>> error complaining about to less disk space. I did not found out what the 
>> problem is, so somebody else has to investigate time into this problem 
>> to find a solution.
>> 
>> Regards Jonatan
>> 
> 

Re: Python3

[Matthias Fischer]

[-- Attachment #1: Type: text/plain, Size: 2854 bytes --]

Hi,

Ok, got it:

"x86_64 refers to 64-bit processors. i386 refers to 32-bit processors."

Replaced all "x86_64" in ".../config/rootfiles/packages/i586/python3"
with "i386" and this seemed to work.

Sent rootfile...

Best,
Matthias

On 28.01.2017 09:33, Matthias Fischer wrote:
> Hi,
> 
> sorry guys, but this won't build here:
> 
> Its always (_build.packages.log):
> 
> ...
> Jan 28 00:04:45: Building python3 Python-3.6.0.tar.xz checksum OK
> + cd /usr/src/lfs
> + make -f python3 LFS_BASEDIR=/usr/src dist
> '/usr/src/config/rootfiles/packages/i586/python3' ->
> '/install/packages/package/ROOTFILES'
> tar:
> usr/lib/python3.6/__pycache__/_sysconfigdata_m_linux_x86_64-linux-gnu.cpython-36.opt-1.pyc:
> Cannot stat: No such file or directory
> tar:
> usr/lib/python3.6/__pycache__/_sysconfigdata_m_linux_x86_64-linux-gnu.cpython-36.opt-2.pyc:
> Cannot stat: No such file or directory
> tar:
> usr/lib/python3.6/__pycache__/_sysconfigdata_m_linux_x86_64-linux-gnu.cpython-36.pyc:
> Cannot stat: No such file or directory
> tar: usr/lib/python3.6/_sysconfigdata_m_linux_x86_64-linux-gnu.py:
> Cannot stat: No such file or directory
> ... and so on ...
> 
> E.g., script is searching for:
> 
> _sysconfigdata_m_linux_x86_64-linux-gnu.cpython-36.opt-1.pyc
>                        ^^^^^^
> It builds:
> 
> _sysconfigdata_m_linux_i386-linux-gnu.cpython-36.opt-1.pyc
>                        ^^^^
> "Fixes for rootfile" (or something similar?) needed!?
> 
> Best,
> Matthias
> 
> On 27.01.2017 13:33, Michael Tremer wrote:
>> Hi,
>> 
>> thank you for submitting this.
>> 
>> I merged this and for me, the flash image couldn't be generated either. The
>> reason for that is that we allocate a partition of a fixed size (which is
>> ~700MB) right now. The system is extracted onto that partition and all is put
>> into the image which then is small enough to fit on a 1GB storage device. As
>> soon as the system boots up for the first time, it increases the partition to
>> maximum size.
>> 
>> However, with adding Python 3 to the core system, it didn't fit into the 700MB
>> any more. I therefore made it an add-on package which is still rather huge
>> (~20MB). Is there any requirement this should be in the core distribution? AFAIK
>> nothing is using this by default, hence it could easily be an add-on.
>> 
>> Best,
>> -Michael
>> 
>> On Mon, 2017-01-23 at 16:17 +0100, Jonatan Schlag wrote:
>>> Hi,
>>> the following patches include python3 in ipfire. 
>>> 
>>> Unfortunately, the flash image build no more. The build fails with a 
>>> tar 
>>> error complaining about to less disk space. I did not found out what the 
>>> problem is, so somebody else has to investigate time into this problem 
>>> to find a solution.
>>> 
>>> Regards Jonatan
>>> 
>> 
> 
> 

Re: Python3

[Michael Tremer]

[-- Attachment #1: Type: text/plain, Size: 3338 bytes --]

Thanks.

I assume that we will have the same issue with ARM but I could not
download a rootfile from a nightly build at the moment...

Best,
-Michael

On Sat, 2017-01-28 at 18:48 +0100, Matthias Fischer wrote:
> Hi,
> 
> Ok, got it:
> 
> "x86_64 refers to 64-bit processors. i386 refers to 32-bit
> processors."
> 
> Replaced all "x86_64" in ".../config/rootfiles/packages/i586/python3"
> with "i386" and this seemed to work.
> 
> Sent rootfile...
> 
> Best,
> Matthias
> 
> On 28.01.2017 09:33, Matthias Fischer wrote:
> > Hi,
> > 
> > sorry guys, but this won't build here:
> > 
> > Its always (_build.packages.log):
> > 
> > ...
> > Jan 28 00:04:45: Building python3 Python-3.6.0.tar.xz checksum OK
> > + cd /usr/src/lfs
> > + make -f python3 LFS_BASEDIR=/usr/src dist
> > '/usr/src/config/rootfiles/packages/i586/python3' ->
> > '/install/packages/package/ROOTFILES'
> > tar:
> > usr/lib/python3.6/__pycache__/_sysconfigdata_m_linux_x86_64-linux-
> > gnu.cpython-36.opt-1.pyc:
> > Cannot stat: No such file or directory
> > tar:
> > usr/lib/python3.6/__pycache__/_sysconfigdata_m_linux_x86_64-linux-
> > gnu.cpython-36.opt-2.pyc:
> > Cannot stat: No such file or directory
> > tar:
> > usr/lib/python3.6/__pycache__/_sysconfigdata_m_linux_x86_64-linux-
> > gnu.cpython-36.pyc:
> > Cannot stat: No such file or directory
> > tar: usr/lib/python3.6/_sysconfigdata_m_linux_x86_64-linux-gnu.py:
> > Cannot stat: No such file or directory
> > ... and so on ...
> > 
> > E.g., script is searching for:
> > 
> > _sysconfigdata_m_linux_x86_64-linux-gnu.cpython-36.opt-1.pyc
> >                        ^^^^^^
> > It builds:
> > 
> > _sysconfigdata_m_linux_i386-linux-gnu.cpython-36.opt-1.pyc
> >                        ^^^^
> > "Fixes for rootfile" (or something similar?) needed!?
> > 
> > Best,
> > Matthias
> > 
> > On 27.01.2017 13:33, Michael Tremer wrote:
> > > Hi,
> > > 
> > > thank you for submitting this.
> > > 
> > > I merged this and for me, the flash image couldn't be generated
> > > either. The
> > > reason for that is that we allocate a partition of a fixed size
> > > (which is
> > > ~700MB) right now. The system is extracted onto that partition
> > > and all is put
> > > into the image which then is small enough to fit on a 1GB storage
> > > device. As
> > > soon as the system boots up for the first time, it increases the
> > > partition to
> > > maximum size.
> > > 
> > > However, with adding Python 3 to the core system, it didn't fit
> > > into the 700MB
> > > any more. I therefore made it an add-on package which is still
> > > rather huge
> > > (~20MB). Is there any requirement this should be in the core
> > > distribution? AFAIK
> > > nothing is using this by default, hence it could easily be an
> > > add-on.
> > > 
> > > Best,
> > > -Michael
> > > 
> > > On Mon, 2017-01-23 at 16:17 +0100, Jonatan Schlag wrote:
> > > > Hi,
> > > > the following patches include python3 in ipfire. 
> > > > 
> > > > Unfortunately, the flash image build no more. The build fails
> > > > with a 
> > > > tar 
> > > > error complaining about to less disk space. I did not found out
> > > > what the 
> > > > problem is, so somebody else has to investigate time into this
> > > > problem 
> > > > to find a solution.
> > > > 
> > > > Regards Jonatan
> > > > 
> > 
> > 
> 
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH 1/2] Prepare for python3

[Michael Tremer]

[-- Attachment #1: Type: text/plain, Size: 1174 bytes --]

Okay, ignored this. Merged the other two.

-Michael

On Fri, 2017-03-10 at 15:32 +0100, Jonatan Schlag wrote:
> Sorry this path is already in next, he can safely ignored.
> 
> Am Fr, 10. Mär, 2017 um 3:30 schrieb Jonatan Schlag 
> <jonatan.schlag(a)ipfire.org>:
> > 
> > The build of ipaadr fails with python3 because two possibilities of
> > /usr/lib/python* are availible. This patch set the path to
> > /usr/lib/python2* to make the path clear.
> > 
> > Signed-off-by: Jonatan Schlag <jonatan.schlag(a)ipfire.org>
> > ---
> >  lfs/ipaddr | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/lfs/ipaddr b/lfs/ipaddr
> > index 4b74e02..186141c 100644
> > --- a/lfs/ipaddr
> > +++ b/lfs/ipaddr
> > @@ -70,7 +70,7 @@ $(subst %,%_MD5,$(objects)) :
> >  $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
> >  	@$(PREBUILD)
> >  	@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE)
> > -	cd $(DIR_APP) && install -m 0644 ipaddr.py /usr/lib/python*
> > +	cd $(DIR_APP) && install -m 0644 ipaddr.py /usr/lib/python2*
> >  	/usr/bin/python -c "import ipaddr"
> >  	@rm -rf $(DIR_APP)
> >  	@$(POSTBUILD)
> > --
> > 2.1.4
> > 
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH 1/2] Prepare for python3

[Jonatan Schlag]

[-- Attachment #1: Type: text/plain, Size: 990 bytes --]

Sorry this path is already in next, he can safely ignored.

Am Fr, 10. Mär, 2017 um 3:30 schrieb Jonatan Schlag 
<jonatan.schlag(a)ipfire.org>:
> The build of ipaadr fails with python3 because two possibilities of
> /usr/lib/python* are availible. This patch set the path to
> /usr/lib/python2* to make the path clear.
> 
> Signed-off-by: Jonatan Schlag <jonatan.schlag(a)ipfire.org>
> ---
>  lfs/ipaddr | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/lfs/ipaddr b/lfs/ipaddr
> index 4b74e02..186141c 100644
> --- a/lfs/ipaddr
> +++ b/lfs/ipaddr
> @@ -70,7 +70,7 @@ $(subst %,%_MD5,$(objects)) :
>  $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>  	@$(PREBUILD)
>  	@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE)
> -	cd $(DIR_APP) && install -m 0644 ipaddr.py /usr/lib/python*
> +	cd $(DIR_APP) && install -m 0644 ipaddr.py /usr/lib/python2*
>  	/usr/bin/python -c "import ipaddr"
>  	@rm -rf $(DIR_APP)
>  	@$(POSTBUILD)
> --
> 2.1.4
> 

[PATCH 1/2] Prepare for python3

[Jonatan Schlag]

[-- Attachment #1: Type: text/plain, Size: 795 bytes --]

The build of ipaadr fails with python3 because two possibilities of
/usr/lib/python* are availible. This patch set the path to
/usr/lib/python2* to make the path clear.

Signed-off-by: Jonatan Schlag <jonatan.schlag(a)ipfire.org>
---
 lfs/ipaddr | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/lfs/ipaddr b/lfs/ipaddr
index 4b74e02..186141c 100644
--- a/lfs/ipaddr
+++ b/lfs/ipaddr
@@ -70,7 +70,7 @@ $(subst %,%_MD5,$(objects)) :
 $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
 	@$(PREBUILD)
 	@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE)
-	cd $(DIR_APP) && install -m 0644 ipaddr.py /usr/lib/python*
+	cd $(DIR_APP) && install -m 0644 ipaddr.py /usr/lib/python2*
 	/usr/bin/python -c "import ipaddr"
 	@rm -rf $(DIR_APP)
 	@$(POSTBUILD)
-- 
2.1.4