* IPFire-3.x Images @ 2019-02-16 9:39 Jonatan Schlag 2019-02-17 17:28 ` ummeegge 0 siblings, 1 reply; 6+ messages in thread From: Jonatan Schlag @ 2019-02-16 9:39 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 1445 bytes --] Hi list, I want to inform you all that new images for IPFire-3.x are available. See this wiki page for more information: https://wiki.ipfire.org/devel/get_image/start I also want to use this E-Mail as a reminder that we not only have IPFire-2.x. I have worked with IPFire-3.x a lot and compared to IPFire- 2.x this version makes a lot of things better than IPFire-2.x A lot of things are very limited in IPFire-2.x. For example, the network in IPFire-2.x does not support IPv6. It is not productive to implement IPv6 in IPFire-2.x. and that's why we build IPFire-3.x from scratch. That means unfortunately that the effort for IPFire-2.x cannot or only partly reused iPFire-3.x. IPFire-3.x is build to support IPv6 and if we want to support this we need IPFire-3.x. Currently, the development work is done by Michael Tremer, Arne Fitzenreiten, Peter Müller, Stefan Schantl and me. My time is very limited at this moment and the other 4 have to work also on IPFire-2.x. As stated time is limited and 4 persons are not enough to build IPFire- 3.x. To push the development of IPFire-3.x it would be cool If everybody would thinking about working on this next major version too. A good starting point is the IPFire-3.x step by step guide here https://wiki.ipfire.org/devel/start So thank you all for your efforts and maybe we can increase the speed of IPFire-3.x development a little bit. :-) Greetings Jonatan ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: IPFire-3.x Images 2019-02-16 9:39 IPFire-3.x Images Jonatan Schlag @ 2019-02-17 17:28 ` ummeegge 2019-02-17 20:05 ` Tom Rymes 0 siblings, 1 reply; 6+ messages in thread From: ummeegge @ 2019-02-17 17:28 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 1776 bytes --] Hi Jonatan, On Sa, 2019-02-16 at 10:39 +0100, Jonatan Schlag wrote: > Hi list, > > I want to inform you all that new images for IPFire-3.x are > available. Great thanks for your work. > > See this wiki page for more information: > https://wiki.ipfire.org/devel/get_image/start > > I also want to use this E-Mail as a reminder that we not only have > IPFire-2.x. I have worked with IPFire-3.x a lot and compared to > IPFire- > 2.x this version makes a lot of things better than IPFire-2.x > > > A lot of things are very limited in IPFire-2.x. For example, the > network in IPFire-2.x does not support IPv6. > It is not productive to implement IPv6 in IPFire-2.x. and that's why > we > build IPFire-3.x from scratch. > That means unfortunately that the effort for IPFire-2.x cannot or > only > partly reused iPFire-3.x. > > IPFire-3.x is build to support IPv6 and if we want to support this we > need IPFire-3.x. > > Currently, the development work is done by Michael Tremer, Arne > Fitzenreiten, Peter Müller, Stefan Schantl and me. My time is very > limited at this moment and the other 4 have to work also on IPFire- > 2.x. > > > As stated time is limited and 4 persons are not enough to build > IPFire- > 3.x. To push the development of IPFire-3.x it would be cool If > everybody would thinking about working on this next major version > too. It might be helpful to know a little more about the insides which kind of work needs to be currently done and who is working on what. > > A good starting point is the IPFire-3.x step by step guide here > > > So thank you all for your efforts and maybe we can increase the speed > of IPFire-3.x development a little bit. :-) Thank you all to for your great work on IPFire-3.x. > > Greetings > Jonatan ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: IPFire-3.x Images 2019-02-17 17:28 ` ummeegge @ 2019-02-17 20:05 ` Tom Rymes 2019-02-18 12:14 ` Michael Tremer 0 siblings, 1 reply; 6+ messages in thread From: Tom Rymes @ 2019-02-17 20:05 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 752 bytes --] > On Feb 17, 2019, at 12:28 PM, ummeegge <ummeegge(a)ipfire.org> wrote: > > On Sa, 2019-02-16 at 10:39 +0100, Jonatan Schlag wrote: >> >> As stated time is limited and 4 persons are not enough to build >> IPFire- >> 3.x. To push the development of IPFire-3.x it would be cool If >> everybody would thinking about working on this next major version >> too. > It might be helpful to know a little more about the insides which kind > of work needs to be currently done and who is working on what. I’d also like to have a better feel for what are the items that need attention before 3.x can be released. It has long been that “IPFire 3 is coming soon", but it’s unclear what work is needed where to get to the next step. Tom ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: IPFire-3.x Images 2019-02-17 20:05 ` Tom Rymes @ 2019-02-18 12:14 ` Michael Tremer 2019-03-17 17:17 ` Jonatan Schlag 0 siblings, 1 reply; 6+ messages in thread From: Michael Tremer @ 2019-02-18 12:14 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 2376 bytes --] Hi, I do not really want to bring down the excitement, but IPFire 3 is no where near ready for production. This image is rather the status from last autumn when we had our last developer summit. Since then, literally nothing has happened in regard of IPFire 3. There is just no time to work on that. As Jonatan has said, all of our time is very limited and we are putting every minute into IPFire 2 to at least keep that running well. Unfortunately that has become more time in the past since I have the feeling that we are getting less and less feedback from testers and so on. The time that we do spend on IPFire 3 is rather on regrouping and finding the spot where we stopped working because too much time passes between those two points in time. So far we have failed to continue working on it a little bit every single day… But, there is also good news… I always tend to talk about the downsides of all of this, but actually there is more positive things to say about IPFire 3: * We have an amazing build system - which is not bug-free but doing a much better job than what we have in IPFire 2 * Networking is working really well. It is powerful, has loads of features. We just need to round it off a little bit. * The OS is modern, small and faster than IPFire 2. If you want to toy around with the networking, here is the documentation: https://man-pages.ipfire.org/network/ Please report any bugs, please talk about IPFire 3. I am happy to help out and answer questions :) -Michael > On 17 Feb 2019, at 20:05, Tom Rymes <trymes(a)rymes.com> wrote: > > >> On Feb 17, 2019, at 12:28 PM, ummeegge <ummeegge(a)ipfire.org> wrote: >> >> On Sa, 2019-02-16 at 10:39 +0100, Jonatan Schlag wrote: >>> >>> As stated time is limited and 4 persons are not enough to build >>> IPFire- >>> 3.x. To push the development of IPFire-3.x it would be cool If >>> everybody would thinking about working on this next major version >>> too. >> It might be helpful to know a little more about the insides which kind >> of work needs to be currently done and who is working on what. > > I’d also like to have a better feel for what are the items that need attention before 3.x can be released. It has long been that “IPFire 3 is coming soon", but it’s unclear what work is needed where to get to the next step. > > Tom ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: IPFire-3.x Images 2019-02-18 12:14 ` Michael Tremer @ 2019-03-17 17:17 ` Jonatan Schlag 2019-03-21 4:12 ` DJ Lucas 0 siblings, 1 reply; 6+ messages in thread From: Jonatan Schlag @ 2019-03-17 17:17 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 6171 bytes --] Hi, a long time has passed since the last E-Mail in this thread but as some Questions are still open, I want to try to answer some of them. 1. It might be helpful to know a little more about the insides which kind of work needs to be currently done and who is working on what. (by ummeegge) The following will be a short overview of who is doing what now (or tries to do): Michael Tremer: Is currently working on the new build system (https://pakfire.ipfire.org/) and the port to python3. You can see the changes here: https://git.ipfire.org/?p=network.git;a=summary This is something where we can not really help. He is also working on the network: https://git.ipfire.org/?p=network.git;a=summary Arne Fitzenreiter: Builds a new kernel and doing some stuff for WIFI : https://git.ipfire.org/?p=ipfire-3.x.git;a=search;h=refs/heads/master;s=Arne+Fitzenreiter;st=author This is also a task were can not really help Peter Müller: He is updating some packages. This is a task which everybody can do and should do. So If you update a package in IPFire-2.x please also update this package on IPFire-3.x. This task is currently a bit hard as the build system has some bugs, but Michael is working on that. Stefan Schantl: Also updating packages: https://git.ipfire.org/?p=ipfire-3.x.git;a=search;s=Stefan+Schantl;st=author Jonatan Schlag: I am working in my currently very limited time on the VPN (IPSEC) https://git.ipfire.org/?p=network.git;a=summary and the network in general. Another big working Area is NITSI: https://git.ipfire.org/?p=nitsi.git;a=summary I will explain this word later. Another thing is building an image which is available under the known link. Which work needs to be done currently: - Updating packages (a Guide can be found here: https://wiki.ipfire.org/devel/start) - Writing tests for NITSI, so what is NITSI? NITSI is the Network Integration Test Suite for Ipfire. It is a program which can execute commands over a serial console in a virtual machine. We developed it to test the network code on a higher level, then it is possible without a running IPFire-3.x machine. So do run a test, NITSI starts several machines defined in a config file and networks also defined in a config file. Then it connects to each machine via serial console and executes network commands on it. These commands are defined in a recipe file. Example: https://git.ipfire.org/?p=network.git;a=blob;f=test/nitsi/test/zone-port-attach bridge/recipe;h=4efbd184de78f32ea42034e7cc7f19efb3e7b32a;hb=refs/heads/master) These tests need to be written and everybody can do that. So only thing to run these tests is to install NITSI from git and run the following command in a network repository (https://git.ipfire.org/?p=network.git;a=summary): make nitsi test/nitsi/test/zone-port-attach-bridge This is a good starting point to play around with this new tool. A guide what tests needs to be written and how exactly you can do that will be added to the wiki (hopefully soon). This E-Mail is incomplete in several ways (NITSI guide) but I hope you have a short overview of what needs to be done and who is working on what. Jonatan Am Mo, 18. Feb, 2019 um 1:14 P. M. schrieb Michael Tremer <michael.tremer(a)ipfire.org>: > Hi, > > I do not really want to bring down the excitement, but IPFire 3 is no > where near ready for production. > > This image is rather the status from last autumn when we had our last > developer summit. Since then, literally nothing has happened in > regard of IPFire 3. There is just no time to work on that. > > As Jonatan has said, all of our time is very limited and we are > putting every minute into IPFire 2 to at least keep that running > well. Unfortunately that has become more time in the past since I > have the feeling that we are getting less and less feedback from > testers and so on. > > The time that we do spend on IPFire 3 is rather on regrouping and > finding the spot where we stopped working because too much time > passes between those two points in time. So far we have failed to > continue working on it a little bit every single day… > > But, there is also good news… I always tend to talk about the > downsides of all of this, but actually there is more positive things > to say about IPFire 3: > > * We have an amazing build system - which is not bug-free but doing a > much better job than what we have in IPFire 2 > > * Networking is working really well. It is powerful, has loads of > features. We just need to round it off a little bit. > > * The OS is modern, small and faster than IPFire 2. > > If you want to toy around with the networking, here is the > documentation: https://man-pages.ipfire.org/network/ > > Please report any bugs, please talk about IPFire 3. I am happy to > help out and answer questions :) > > -Michael > >> On 17 Feb 2019, at 20:05, Tom Rymes <trymes(a)rymes.com> wrote: >> >> >>> On Feb 17, 2019, at 12:28 PM, ummeegge <ummeegge(a)ipfire.org> wrote: >>> >>> On Sa, 2019-02-16 at 10:39 +0100, Jonatan Schlag wrote: >>>> >>>> As stated time is limited and 4 persons are not enough to build >>>> IPFire- >>>> 3.x. To push the development of IPFire-3.x it would be cool If >>>> everybody would thinking about working on this next major version >>>> too. >>> It might be helpful to know a little more about the insides which >>> kind >>> of work needs to be currently done and who is working on what. >> >> I’d also like to have a better feel for what are the items that >> need attention before 3.x can be released. It has long been that >> “IPFire 3 is coming soon", but it’s unclear what work is needed >> where to get to the next step. >> >> Tom > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: IPFire-3.x Images 2019-03-17 17:17 ` Jonatan Schlag @ 2019-03-21 4:12 ` DJ Lucas 0 siblings, 0 replies; 6+ messages in thread From: DJ Lucas @ 2019-03-21 4:12 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 4297 bytes --] On 3/17/2019 12:17 PM, Jonatan Schlag wrote: > Hi, > > a long time has passed since the last E-Mail in this thread but as > some Questions are still open, I want to try to answer some of them. > > 1. It might be helpful to know a little more about the insides which kind > of work needs to be currently done and who is working on what. (by > ummeegge) > > The following will be a short overview of who is doing what now (or > tries to do): > > Michael Tremer: Is currently working on the new build system > (https://pakfire.ipfire.org/) and the port to python3. You can see the > changes here: > https://git.ipfire.org/?p=network.git;a=summary Should be: https://git.ipfire.org/?p=pakfire.git;a=summary > This is something where we can not really help. > He is also working on the network: > https://git.ipfire.org/?p=network.git;a=summary > > Arne Fitzenreiter: Builds a new kernel and doing some stuff for > WIFI : > https://git.ipfire.org/?p=ipfire-3.x.git;a=search;h=refs/heads/master;s=Arne+Fitzenreiter;st=author > This is also a task were can not really help > > Peter Müller: He is updating some packages. This is a task > which everybody can do and should do. So If you update a package in > IPFire-2.x > please also update this package on IPFire-3.x. > This task is currently a bit hard as the build system has some bugs, but > Michael is working on that. > > Stefan Schantl: Also updating packages: > https://git.ipfire.org/?p=ipfire-3.x.git;a=search;s=Stefan+Schantl;st=author > > Jonatan Schlag: I am working in my currently very limited time > on the VPN (IPSEC) > https://git.ipfire.org/?p=network.git;a=summary and the network in > general. Another big working Area is NITSI: > https://git.ipfire.org/?p=nitsi.git;a=summary I will explain this word > later. Another thing is building an image which is > available under the known link. > > Which work needs to be done currently: > > - Updating packages (a Guide can be found here: > https://wiki.ipfire.org/devel/start) > - Writing tests for NITSI, so what is NITSI? > NITSI is the Network Integration Test Suite for Ipfire. It is a > program which can execute commands over a serial console in a virtual > machine. We developed it to test the network code on a higher > level, then it is possible without a running IPFire-3.x machine. So do > run a > test, NITSI starts several machines defined in a config file and > networks also defined in a config file. Then it connects to each machine > via serial console and executes network commands on it. These > commands are defined in a recipe file. > Example: > https://git.ipfire.org/?p=network.git;a=blob;f=test/nitsi/test/zone-port-attach > bridge/recipe;h=4efbd184de78f32ea42034e7cc7f19efb3e7b32a;hb=refs/heads/master) > > These tests need to be written and everybody can do that. So > only thing to run these tests is to install NITSI from git and run the > following command in a network repository > (https://git.ipfire.org/?p=network.git;a=summary): > > make nitsi test/nitsi/test/zone-port-attach-bridge > > This is a good starting point to play around with this new > tool. A guide what tests needs to be written and how exactly you can > do that > will be added to the wiki (hopefully soon). > > > This E-Mail is incomplete in several ways (NITSI guide) but I hope you > have a short overview of what needs to be done and who is working on > what. > While I do not have the time right this second, I'd like to jump in and assist when other work lulls. Thank you for the update and please continue to keep them coming. It'll help those who are not part of the core team to be able to jump in and assist where/when they can. I suspect many more than have replied are watching, and eagerly awaiting 3.x. --DJ ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-03-21 4:12 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-02-16 9:39 IPFire-3.x Images Jonatan Schlag 2019-02-17 17:28 ` ummeegge 2019-02-17 20:05 ` Tom Rymes 2019-02-18 12:14 ` Michael Tremer 2019-03-17 17:17 ` Jonatan Schlag 2019-03-21 4:12 ` DJ Lucas
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox