From: Michael Tremer <michael.tremer@ipfire.org>
To: development@lists.ipfire.org
Subject: Re: Errors for WLAN card since CU189
Date: Wed, 16 Oct 2024 16:05:10 +0100 [thread overview]
Message-ID: <1B5B2A25-97A9-4251-9400-ECA8235637DE@ipfire.org> (raw)
In-Reply-To: <64d60b6f-f36c-477c-99f6-73c4cb3b0bab@ipfire.org>
[-- Attachment #1: Type: text/plain, Size: 3701 bytes --]
I believe this is a known bug in the driver. You can fix this by turning the IRQ mode to legacy. It is a setting of the module:
[root(a)fw01 ~]# modinfo ath10k_pci
filename: /lib/modules/6.6.47-ipfire/kernel/drivers/net/wireless/ath/ath10k/ath10k_pci.ko.xz
firmware: ath10k/QCA9377/hw1.0/board.bin
firmware: ath10k/QCA9377/hw1.0/firmware-5.bin
firmware: ath10k/QCA9377/hw1.0/firmware-6.bin
firmware: ath10k/QCA6174/hw3.0/board-2.bin
firmware: ath10k/QCA6174/hw3.0/board.bin
…
parm: irq_mode:0: auto, 1: legacy, 2: msi (default: 0) (uint)
…
This is most likely because of updating the firmware for your card.
-Michael
> On 16 Oct 2024, at 16:02, Bernhard Bitsch <bbitsch(a)ipfire.org> wrote:
>
> Hi,
>
> since some time I noticed strange messages according to my WLAN card.
> With CU189 these are very frequently.
>
> An extract from now:
>
> ...
> Oct 16 16:09:17 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to increase tx pending count: -16, dropping
> Oct 16 16:10:39 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to increase tx pending count: -16, dropping
> Oct 16 16:11:20 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:13:45 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to increase tx pending count: -16, dropping
> Oct 16 16:18:47 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:18:52 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:19:13 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:19:28 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:19:33 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:19:38 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:19:43 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:19:48 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:19:54 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:19:59 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:20:04 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:20:09 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:20:24 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:20:40 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:21:10 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:21:16 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:21:41 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:21:46 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> Oct 16 16:21:51 BitschCop kernel: ath10k_pci 0000:01:00.0: failed to flush transmit queue (skip 0 ar-state 1): 0
> ............
>
> Regards,
> Bernhard
>
> BTW: I'm missing the status part of the hostapd WUI page.
next prev parent reply other threads:[~2024-10-16 15:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-16 15:02 Bernhard Bitsch
2024-10-16 15:05 ` Michael Tremer [this message]
2024-10-16 16:04 ` Bernhard Bitsch
2024-10-16 16:20 ` Bernhard Bitsch
2024-10-16 19:04 ` Bernhard Bitsch
2024-10-17 9:33 ` Michael Tremer
2024-10-17 9:43 ` Bernhard Bitsch
[not found] <920bf76e-5baf-4cb5-9a47-26b69a801c81@ipfire.org>
2024-10-16 16:03 ` Michael Tremer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1B5B2A25-97A9-4251-9400-ECA8235637DE@ipfire.org \
--to=michael.tremer@ipfire.org \
--cc=development@lists.ipfire.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox