[PATCH 1/2] udev: Add more logging to bridge hotplug script

[PATCH 1/2] udev: Add more logging to bridge hotplug script

[Michael Tremer]

[-- Attachment #1: Type: text/plain, Size: 790 bytes --]

Signed-off-by: Michael Tremer <michael.tremer(a)ipfire.org>
---
 config/udev/network-hotplug-bridges | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/config/udev/network-hotplug-bridges b/config/udev/network-hotplug-bridges
index 5144a7712..30a671f04 100644
--- a/config/udev/network-hotplug-bridges
+++ b/config/udev/network-hotplug-bridges
@@ -72,6 +72,7 @@ ZONE=$(detect_zone)
 
 # Cannot proceed if we could not find a zone
 if [ -z "${ZONE}" ]; then
+	logger "Could not find a bridged zone for ${INTERFACE}"
 	exit 0
 fi
 
@@ -93,6 +94,7 @@ case "${MODE}" in
 		fi
 
 		# Attach the physical device
+		logger "Attach ${INTERFACE} to ${BRIDGE}"
 		ip link set dev "${INTERFACE}" master "${BRIDGE}"
 		ip link set dev "${INTERFACE}" up
 		;;
-- 
2.20.1

[PATCH 2/2] udev: Set wireless interfaces into AP mode before adding to bridge

[Michael Tremer]

[-- Attachment #1: Type: text/plain, Size: 1161 bytes --]

Wireless interfaces cannot be added to the bridge when they are
still running in station mode. At boot time, the interface will
be created and it is attempted to attach it to a bridge, which
fails.

This patch now checks whether the wireless interface is going to
be an access point, changes the mode accordingly and then attaches
the interface to the bridge.

Signed-off-by: Michael Tremer <michael.tremer(a)ipfire.org>
Tested-by: Daniel Weismüller <daniel.weismueller(a)ipfire.org>
---
 config/udev/network-hotplug-bridges | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/config/udev/network-hotplug-bridges b/config/udev/network-hotplug-bridges
index 30a671f04..33d6d65ba 100644
--- a/config/udev/network-hotplug-bridges
+++ b/config/udev/network-hotplug-bridges
@@ -93,6 +93,10 @@ case "${MODE}" in
 			#ip link set "${BRIDGE}" up
 		fi
 
+		if grep -q "INTERFACE=${INTERFACE}" "/var/ipfire/wlanap/settings" 2>/dev/null; then
+			iw dev "${INTERFACE}" set type __ap
+		fi
+
 		# Attach the physical device
 		logger "Attach ${INTERFACE} to ${BRIDGE}"
 		ip link set dev "${INTERFACE}" master "${BRIDGE}"
-- 
2.20.1