* [PATCH 2/3] hostapd: Import default configuration from hostapd 2.9
2020-10-19 14:48 [PATCH 1/3] hostapd: Add WPA3 authentication to the web UI Michael Tremer
@ 2020-10-19 14:48 ` Michael Tremer
2020-10-19 14:48 ` [PATCH 3/3] hostapd: Bump package version Michael Tremer
1 sibling, 0 replies; 3+ messages in thread
From: Michael Tremer @ 2020-10-19 14:48 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 8291 bytes --]
This change removes a couple of removed options and adds
new ones. Notable changes are:
* Enable SAE (for WPA3)
* Enable Airtime Policy
* Enable Client Taxonomy
* Enable using the new getrandom() syscall
* Enable using epoll instead of select
Signed-off-by: Michael Tremer <michael.tremer(a)ipfire.org>
---
config/hostapd/config | 127 ++++++++++++++++++++++++++++++++++--------
1 file changed, 105 insertions(+), 22 deletions(-)
diff --git a/config/hostapd/config b/config/hostapd/config
index 66ebbf1ce..78206ed78 100644
--- a/config/hostapd/config
+++ b/config/hostapd/config
@@ -15,22 +15,31 @@ CONFIG_DRIVER_HOSTAP=y
# Driver interface for wired authenticator
#CONFIG_DRIVER_WIRED=y
-# Driver interface for Prism54 driver
-CONFIG_DRIVER_PRISM54=y
-
# Driver interface for drivers using the nl80211 kernel interface
CONFIG_DRIVER_NL80211=y
-# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
-# shipped with your distribution yet. If that is the case, you need to build
-# newer libnl version and point the hostapd build to use it.
-#LIBNL=/usr/src/libnl
-#CFLAGS += -I$(LIBNL)/include
-#LIBS += -L$(LIBNL)/lib
+
+# QCA vendor extensions to nl80211
+#CONFIG_DRIVER_NL80211_QCA=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+CONFIG_LIBNL32=y
+
# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
#CONFIG_DRIVER_BSD=y
#CFLAGS += -I/usr/local/include
#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
# Driver interface for no driver (e.g., RADIUS server only)
#CONFIG_DRIVER_NONE=y
@@ -41,12 +50,12 @@ CONFIG_IAPP=y
# WPA2/IEEE 802.11i RSN pre-authentication
CONFIG_RSN_PREAUTH=y
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
# IEEE 802.11w (management frame protection)
CONFIG_IEEE80211W=y
+# Support Operating Channel Validation
+#CONFIG_OCV=y
+
# Integrated EAP server
CONFIG_EAP=y
@@ -99,24 +108,30 @@ CONFIG_EAP_TTLS=y
#CONFIG_EAP_GPSK_SHA256=y
# EAP-FAST for the integrated EAP server
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
-# to add the needed functions.
#CONFIG_EAP_FAST=y
+# EAP-TEAP for the integrated EAP server
+# Note: The current EAP-TEAP implementation is experimental and should not be
+# enabled for production use. The IETF RFC 7170 that defines EAP-TEAP has number
+# of conflicting statements and missing details and the implementation has
+# vendor specific workarounds for those and as such, may not interoperate with
+# any other implementation. This should not be used for anything else than
+# experimentation and interoperability testing until those issues has been
+# resolved.
+#CONFIG_EAP_TEAP=y
+
# Wi-Fi Protected Setup (WPS)
-CONFIG_WPS=y
+#CONFIG_WPS=y
# Enable UPnP support for external WPS Registrars
-CONFIG_WPS_UPNP=y
+#CONFIG_WPS_UPNP=y
# Enable WPS support with NFC config method
#CONFIG_WPS_NFC=y
# EAP-IKEv2
-CONFIG_EAP_IKEV2=y
+#CONFIG_EAP_IKEV2=y
# Trusted Network Connect (EAP-TNC)
-CONFIG_EAP_TNC=y
+#CONFIG_EAP_TNC=y
# EAP-EKE for the integrated EAP server
#CONFIG_EAP_EKE=y
@@ -133,10 +148,10 @@ CONFIG_PKCS12=y
#CONFIG_IPV6=y
# IEEE Std 802.11r-2008 (Fast BSS Transition)
-CONFIG_IEEE80211R=y
+#CONFIG_IEEE80211R=y
# Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
+# the IEEE 802.11 Management capability (e.g., FreeBSD/net80211)
#CONFIG_DRIVER_RADIUS_ACL=y
# IEEE 802.11n (High Throughput) support
@@ -149,6 +164,12 @@ CONFIG_IEEE80211N=y
# IEEE 802.11ac (Very High Throughput) support
CONFIG_IEEE80211AC=y
+# IEEE 802.11ax HE support
+# Note: This is experimental and work in progress. The definitions are still
+# subject to change and this should not be expected to interoperate with the
+# final IEEE 802.11ax version.
+#CONFIG_IEEE80211AX=y
+
# Remove debugging code that is printing out debug messages to stdout.
# This can be used to reduce the size of the hostapd considerably if debugging
# code is not needed.
@@ -158,6 +179,9 @@ CONFIG_IEEE80211AC=y
# Disabled by default.
#CONFIG_DEBUG_FILE=y
+# Send debug messages to syslog instead of stdout
+#CONFIG_DEBUG_SYSLOG=y
+
# Add support for sending all debug messages (regardless of debug verbosity)
# to the Linux kernel tracing facility. This helps debug the entire stack by
# making it easy to record everything happening from the driver up into the
@@ -235,10 +259,25 @@ CONFIG_IEEE80211AC=y
# requirements described above.
#CONFIG_NO_RANDOM_POOL=y
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+CONFIG_GETRANDOM=y
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Should we use epoll instead of select? Select is used by default.
+CONFIG_ELOOP_EPOLL=y
+
+# Should we use kqueue instead of select? Select is used by default.
+#CONFIG_ELOOP_KQUEUE=y
+
# Select TLS implementation
# openssl = OpenSSL (default)
# gnutls = GnuTLS
# internal = Internal TLSv1 implementation (experimental)
+# linux = Linux kernel AF_ALG and internal TLSv1 implementation (experimental)
# none = Empty template
#CONFIG_TLS=openssl
@@ -251,6 +290,10 @@ CONFIG_IEEE80211AC=y
# can be enabled to enable use of stronger crypto algorithms.
#CONFIG_TLSV12=y
+# Select which ciphers to use by default with OpenSSL if the user does not
+# specify them.
+#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
+
# If CONFIG_TLS=internal is used, additional library and include paths are
# needed for LibTomMath. Alternatively, an integrated, minimal version of
# LibTomMath can be used. See beginning of libtommath.c for details on benefits
@@ -278,6 +321,12 @@ CONFIG_IEEE80211AC=y
# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
#CONFIG_SQLITE=y
+# Enable Fast Session Transfer (FST)
+#CONFIG_FST=y
+
+# Enable CLI commands for FST testing
+#CONFIG_FST_TEST=y
+
# Testing options
# This can be used to enable some testing options (see also the example
# configuration file) that are really useful only for testing clients that
@@ -309,3 +358,37 @@ CONFIG_IEEE80211AC=y
# http://wireless.kernel.org/en/users/Documentation/acs
#
CONFIG_ACS=y
+
+# Multiband Operation support
+# These extentions facilitate efficient use of multiple frequency bands
+# available to the AP and the devices that may associate with it.
+#CONFIG_MBO=y
+
+# Client Taxonomy
+# Has the AP retain the Probe Request and (Re)Association Request frames from
+# a client, from which a signature can be produced which can identify the model
+# of client device like "Nexus 6P" or "iPhone 5s".
+CONFIG_TAXONOMY=y
+
+# Fast Initial Link Setup (FILS) (IEEE 802.11ai)
+#CONFIG_FILS=y
+# FILS shared key authentication with PFS
+#CONFIG_FILS_SK_PFS=y
+
+# Include internal line edit mode in hostapd_cli. This can be used to provide
+# limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Opportunistic Wireless Encryption (OWE)
+# Experimental implementation of draft-harkins-owe-07.txt
+#CONFIG_OWE=y
+
+# Airtime policy support
+CONFIG_AIRTIME_POLICY=y
+
+# Override default value for the wpa_disable_eapol_key_retries configuration
+# parameter. See that parameter in hostapd.conf for more details.
+#CFLAGS += -DDEFAULT_WPA_DISABLE_EAPOL_KEY_RETRIES=1
+
+# Custom configuration
+CONFIG_SAE=y
--
2.20.1
^ permalink raw reply [flat|nested] 3+ messages in thread