From: Adolf Belka <adolf.belka@ipfire.org>
To: development@lists.ipfire.org
Subject: [PATCH] pcre2: Update to 10.37
Date: Thu, 03 Jun 2021 14:21:32 +0200 [thread overview]
Message-ID: <20210603122132.683868-1-adolf.belka@ipfire.org> (raw)
[-- Attachment #1: Type: text/plain, Size: 18649 bytes --]
- Update from 10.36 to 10.37
- Update rootfile
- find-dependencies run to check impact of so lib bump
No issues found
- Changelog
Version 10.37 26-May-2021
1. Change RunGrepTest to use tr instead of sed when testing with binary
zero bytes, because sed varies a lot from system to system and has problems
with binary zeros. This is from Bugzilla #2681. Patch from Jeremie
Courreges-Anglas via Nam Nguyen. This fixes RunGrepTest for OpenBSD. Later:
it broke it for at least one version of Solaris, where tr can't handle binary
zeros. However, that system had /usr/xpg4/bin/tr installed, which works OK, so
RunGrepTest now checks for that command and uses it if found.
2. Compiling with gcc 10.2's -fanalyzer option showed up a hypothetical problem
with a NULL dereference. I don't think this case could ever occur in practice,
but I have put in a check in order to get rid of the compiler error.
3. An alternative patch for CMakeLists.txt because 10.36 #4 breaks CMake on
Windows. Patch from email(a)cs-ware.de fixes bugzilla #2688.
4. Two bugs related to over-large numbers have been fixed so the behaviour is
now the same as Perl.
(a) A pattern such as /\214748364/ gave an overflow error instead of being
treated as the octal number \214 followed by literal digits.
(b) A sequence such as {65536 that has no terminating } so is not a
quantifier was nevertheless complaining that a quantifier number was too big.
5. A run of autoconf suggested that configure.ac was out-of-date with respect
to the lastest autoconf. Running autoupdate made some valid changes, some valid
suggestions, and also some invalid changes, which were fixed by hand. Autoconf
now runs clean and the resulting "configure" seems to work, so I hope nothing
is broken. Later: the requirement for autoconf 2.70 broke some automatic test
robots. It doesn't seem to be necessary: trying a reduction to 2.60.
6. The pattern /a\K.(?0)*/ when matched against "abac" by the interpreter gave
the answer "bac", whereas Perl and JIT both yield "c". This was because the
effect of \K was not propagating back from the full pattern recursion. Other
recursions such as /(a\K.(?1)*)/ did not have this problem.
7. Restore single character repetition optimization in JIT. Currently fewer
character repetitions are optimized than in 10.34.
8. When the names of the functions in the POSIX wrapper were changed to
pcre2_regcomp() etc. (see change 10.33 #4 below), functions with the original
names were left in the library so that pre-compiled programs would still work.
However, this has proved troublesome when programs link with several libraries,
some of which use PCRE2 via the POSIX interface while others use a native POSIX
library. For this reason, the POSIX function names are removed in this release.
The macros in pcre2posix.h should ensure that re-compiling fixes any programs
that haven't been compiled since before 10.33.
Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
---
config/rootfiles/common/pcre2 | 228 +++++++++++++++++-----------------
lfs/pcre2 | 4 +-
2 files changed, 116 insertions(+), 116 deletions(-)
diff --git a/config/rootfiles/common/pcre2 b/config/rootfiles/common/pcre2
index 440af7b0d..e5b02d1f7 100644
--- a/config/rootfiles/common/pcre2
+++ b/config/rootfiles/common/pcre2
@@ -6,132 +6,132 @@
#usr/lib/libpcre2-16.la
#usr/lib/libpcre2-16.so
usr/lib/libpcre2-16.so.0
-usr/lib/libpcre2-16.so.0.10.1
+usr/lib/libpcre2-16.so.0.10.2
#usr/lib/libpcre2-32.la
#usr/lib/libpcre2-32.so
usr/lib/libpcre2-32.so.0
-usr/lib/libpcre2-32.so.0.10.1
+usr/lib/libpcre2-32.so.0.10.2
#usr/lib/libpcre2-8.la
#usr/lib/libpcre2-8.so
usr/lib/libpcre2-8.so.0
-usr/lib/libpcre2-8.so.0.10.1
+usr/lib/libpcre2-8.so.0.10.2
#usr/lib/libpcre2-posix.la
#usr/lib/libpcre2-posix.so
-usr/lib/libpcre2-posix.so.2
-usr/lib/libpcre2-posix.so.2.0.3
+usr/lib/libpcre2-posix.so.3
+usr/lib/libpcre2-posix.so.3.0.0
#usr/lib/pkgconfig/libpcre2-16.pc
#usr/lib/pkgconfig/libpcre2-32.pc
#usr/lib/pkgconfig/libpcre2-8.pc
#usr/lib/pkgconfig/libpcre2-posix.pc
-#usr/share/doc/pcre-pcre2-10.36
-#usr/share/doc/pcre-pcre2-10.36/AUTHORS
-#usr/share/doc/pcre-pcre2-10.36/COPYING
-#usr/share/doc/pcre-pcre2-10.36/ChangeLog
-#usr/share/doc/pcre-pcre2-10.36/LICENCE
-#usr/share/doc/pcre-pcre2-10.36/NEWS
-#usr/share/doc/pcre-pcre2-10.36/README
-#usr/share/doc/pcre-pcre2-10.36/html
-#usr/share/doc/pcre-pcre2-10.36/html/NON-AUTOTOOLS-BUILD.txt
-#usr/share/doc/pcre-pcre2-10.36/html/README.txt
-#usr/share/doc/pcre-pcre2-10.36/html/index.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2-config.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_callout_enumerate.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_code_copy.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_code_copy_with_tables.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_code_free.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_compile.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_compile_context_copy.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_compile_context_create.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_compile_context_free.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_config.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_convert_context_copy.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_convert_context_create.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_convert_context_free.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_converted_pattern_free.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_dfa_match.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_general_context_copy.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_general_context_create.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_general_context_free.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_get_error_message.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_get_mark.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_get_match_data_size.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_get_ovector_count.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_get_ovector_pointer.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_get_startchar.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_jit_compile.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_jit_free_unused_memory.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_jit_match.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_jit_stack_assign.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_jit_stack_create.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_jit_stack_free.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_maketables.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_maketables_free.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_match.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_match_context_copy.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_match_context_create.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_match_context_free.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_match_data_create.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_match_data_create_from_pattern.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_match_data_free.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_pattern_convert.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_pattern_info.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_serialize_decode.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_serialize_encode.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_serialize_free.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_serialize_get_number_of_codes.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_set_bsr.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_set_callout.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_set_character_tables.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_set_compile_extra_options.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_set_compile_recursion_guard.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_set_depth_limit.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_set_glob_escape.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_set_glob_separator.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_set_heap_limit.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_set_match_limit.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_set_max_pattern_length.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_set_newline.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_set_offset_limit.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_set_parens_nest_limit.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_set_recursion_limit.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_set_recursion_memory_management.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_set_substitute_callout.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_substitute.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_substring_copy_byname.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_substring_copy_bynumber.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_substring_free.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_substring_get_byname.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_substring_get_bynumber.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_substring_length_byname.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_substring_length_bynumber.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_substring_list_free.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_substring_list_get.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_substring_nametable_scan.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2_substring_number_from_name.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2api.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2build.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2callout.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2compat.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2convert.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2demo.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2grep.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2jit.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2limits.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2matching.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2partial.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2pattern.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2perform.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2posix.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2sample.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2serialize.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2syntax.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2test.html
-#usr/share/doc/pcre-pcre2-10.36/html/pcre2unicode.html
-#usr/share/doc/pcre-pcre2-10.36/pcre2-config.txt
-#usr/share/doc/pcre-pcre2-10.36/pcre2.txt
-#usr/share/doc/pcre-pcre2-10.36/pcre2grep.txt
-#usr/share/doc/pcre-pcre2-10.36/pcre2test.txt
+#usr/share/doc/pcre-pcre2-10.37
+#usr/share/doc/pcre-pcre2-10.37/AUTHORS
+#usr/share/doc/pcre-pcre2-10.37/COPYING
+#usr/share/doc/pcre-pcre2-10.37/ChangeLog
+#usr/share/doc/pcre-pcre2-10.37/LICENCE
+#usr/share/doc/pcre-pcre2-10.37/NEWS
+#usr/share/doc/pcre-pcre2-10.37/README
+#usr/share/doc/pcre-pcre2-10.37/html
+#usr/share/doc/pcre-pcre2-10.37/html/NON-AUTOTOOLS-BUILD.txt
+#usr/share/doc/pcre-pcre2-10.37/html/README.txt
+#usr/share/doc/pcre-pcre2-10.37/html/index.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2-config.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_callout_enumerate.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_code_copy.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_code_copy_with_tables.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_code_free.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_compile.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_compile_context_copy.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_compile_context_create.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_compile_context_free.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_config.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_convert_context_copy.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_convert_context_create.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_convert_context_free.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_converted_pattern_free.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_dfa_match.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_general_context_copy.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_general_context_create.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_general_context_free.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_get_error_message.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_get_mark.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_get_match_data_size.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_get_ovector_count.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_get_ovector_pointer.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_get_startchar.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_jit_compile.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_jit_free_unused_memory.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_jit_match.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_jit_stack_assign.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_jit_stack_create.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_jit_stack_free.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_maketables.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_maketables_free.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_match.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_match_context_copy.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_match_context_create.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_match_context_free.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_match_data_create.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_match_data_create_from_pattern.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_match_data_free.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_pattern_convert.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_pattern_info.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_serialize_decode.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_serialize_encode.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_serialize_free.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_serialize_get_number_of_codes.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_bsr.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_callout.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_character_tables.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_compile_extra_options.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_compile_recursion_guard.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_depth_limit.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_glob_escape.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_glob_separator.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_heap_limit.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_match_limit.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_max_pattern_length.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_newline.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_offset_limit.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_parens_nest_limit.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_recursion_limit.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_recursion_memory_management.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_set_substitute_callout.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substitute.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_copy_byname.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_copy_bynumber.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_free.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_get_byname.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_get_bynumber.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_length_byname.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_length_bynumber.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_list_free.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_list_get.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_nametable_scan.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2_substring_number_from_name.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2api.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2build.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2callout.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2compat.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2convert.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2demo.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2grep.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2jit.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2limits.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2matching.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2partial.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2pattern.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2perform.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2posix.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2sample.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2serialize.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2syntax.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2test.html
+#usr/share/doc/pcre-pcre2-10.37/html/pcre2unicode.html
+#usr/share/doc/pcre-pcre2-10.37/pcre2-config.txt
+#usr/share/doc/pcre-pcre2-10.37/pcre2.txt
+#usr/share/doc/pcre-pcre2-10.37/pcre2grep.txt
+#usr/share/doc/pcre-pcre2-10.37/pcre2test.txt
#usr/share/man/man1/pcre2-config.1
#usr/share/man/man1/pcre2grep.1
#usr/share/man/man1/pcre2test.1
diff --git a/lfs/pcre2 b/lfs/pcre2
index c2042e902..fd9548a73 100644
--- a/lfs/pcre2
+++ b/lfs/pcre2
@@ -24,7 +24,7 @@
include Config
-VER = 10.36
+VER = 10.37
THISAPP = pcre2-$(VER)
DL_FILE = $(THISAPP).tar.gz
@@ -54,7 +54,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_MD5 = a5d9aa7d18b61b0226696510e60c9582
+$(DL_FILE)_MD5 = a0b59d89828f62d2e1caac04f7c51e0b
install : $(TARGET)
--
2.31.1
reply other threads:[~2021-06-03 12:21 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210603122132.683868-1-adolf.belka@ipfire.org \
--to=adolf.belka@ipfire.org \
--cc=development@lists.ipfire.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox