* [PATCH 1/6] make.sh: Remove crda and remaining python2 modules
@ 2021-06-28 19:13 Adolf Belka
2021-06-28 19:13 ` [PATCH 2/6] crda: removal from kernel 4.15 and onwards Adolf Belka
` (5 more replies)
0 siblings, 6 replies; 15+ messages in thread
From: Adolf Belka @ 2021-06-28 19:13 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 1878 bytes --]
- crda only works with python2 version of m2crypto
python-m2crypto requires python-setuptools and python-typing
- With Linux kernel 4.15 and later the country code status check that crda did is built
into the kernel.
- So from kernel 4.15, crda can be removed, which allows removal of m2crypto, setuptools
and typing.
- python-typing is built into python3 so no additional python3 module required.
- python3 version of python-setuptools has already been installed.
- python3 version of python-m2crypto is not required. python-m2crypto is only used for the
build of crda.
- ipaddr can be removed as the function of this python2 module is built into python3 with
ipaddress.py
- removal of crda tested with 5.10.45 kernel and the setting of a country code was
recognised. If this test carried out with crda removed and 4.14.232 kernel then country
code stays defined as the global code "00".
Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
---
make.sh | 5 -----
1 file changed, 5 deletions(-)
diff --git a/make.sh b/make.sh
index fc03ebcd5..f8767bad9 100755
--- a/make.sh
+++ b/make.sh
@@ -1307,7 +1307,6 @@ buildipfire() {
lfsmake2 whatmask
lfsmake2 libtirpc
lfsmake2 conntrack-tools
- lfsmake2 ipaddr
lfsmake2 iputils
lfsmake2 l7-protocols
lfsmake2 hwdata
@@ -1344,7 +1343,6 @@ buildipfire() {
lfsmake2 XML-Parser
lfsmake2 Crypt-PasswdMD5
lfsmake2 Net-Telnet
- lfsmake2 python-setuptools
lfsmake2 python3-setuptools
lfsmake2 python3-inotify
lfsmake2 python3-docutils
@@ -1527,10 +1525,7 @@ buildipfire() {
lfsmake2 swig
lfsmake2 u-boot
lfsmake2 u-boot-friendlyarm
- lfsmake2 python-typing
- lfsmake2 python-m2crypto
lfsmake2 wireless-regdb
- lfsmake2 crda
lfsmake2 libsolv
lfsmake2 ddns
lfsmake2 python3-setuptools-scm
--
2.32.0
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 2/6] crda: removal from kernel 4.15 and onwards.
2021-06-28 19:13 [PATCH 1/6] make.sh: Remove crda and remaining python2 modules Adolf Belka
@ 2021-06-28 19:13 ` Adolf Belka
2021-07-09 6:26 ` Arne Fitzenreiter
2021-06-28 19:13 ` [PATCH 3/6] python-m2crypto: removal of python2 module Adolf Belka
` (4 subsequent siblings)
5 siblings, 1 reply; 15+ messages in thread
From: Adolf Belka @ 2021-06-28 19:13 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 4896 bytes --]
- From kernel 4.15 and onwards the function of what crda does is built into the kernel.
- Tested the removal of crda with kernel 4.14.232 and kernel 5.10.45
Country code set by "iw reg set NL" was recognised with kernel 5.10.45 and set at
the global value of 00 with kernel 4.14.232 confirming the kernel built in option is
working without the prescence of crda
Tested-by: Adolf Belka <adolf.belka(a)ipfire.org>
Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
---
config/rootfiles/common/crda | 14 -------
lfs/crda | 78 ------------------------------------
2 files changed, 92 deletions(-)
delete mode 100644 config/rootfiles/common/crda
delete mode 100644 lfs/crda
diff --git a/config/rootfiles/common/crda b/config/rootfiles/common/crda
deleted file mode 100644
index 5f93bc254..000000000
--- a/config/rootfiles/common/crda
+++ /dev/null
@@ -1,14 +0,0 @@
-lib/udev/rules.d/85-regulatory.rules
-#root/.python-eggs
-#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp
-#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto
-#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto/__m2crypto.so
-sbin/crda
-sbin/regdbdump
-#usr/include/reglib
-#usr/include/reglib/nl80211.h
-#usr/include/reglib/regdb.h
-#usr/include/reglib/reglib.h
-usr/lib/libreg.so
-#usr/share/man/man8/crda.8.gz
-#usr/share/man/man8/regdbdump.8.gz
diff --git a/lfs/crda b/lfs/crda
deleted file mode 100644
index bd812942e..000000000
--- a/lfs/crda
+++ /dev/null
@@ -1,78 +0,0 @@
-###############################################################################
-# #
-# IPFire.org - A linux based firewall #
-# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> #
-# #
-# This program is free software: you can redistribute it and/or modify #
-# it under the terms of the GNU General Public License as published by #
-# the Free Software Foundation, either version 3 of the License, or #
-# (at your option) any later version. #
-# #
-# This program is distributed in the hope that it will be useful, #
-# but WITHOUT ANY WARRANTY; without even the implied warranty of #
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
-# GNU General Public License for more details. #
-# #
-# You should have received a copy of the GNU General Public License #
-# along with this program. If not, see <http://www.gnu.org/licenses/>. #
-# #
-###############################################################################
-
-###############################################################################
-# Definitions
-###############################################################################
-
-include Config
-
-VER = 4.14
-
-THISAPP = crda-$(VER)
-DL_FILE = $(THISAPP).tar.gz
-DL_FROM = $(URL_IPFIRE)
-DIR_APP = $(DIR_SRC)/$(THISAPP)
-
-TARGET = $(DIR_INFO)/$(THISAPP)
-
-###############################################################################
-# Top-level Rules
-###############################################################################
-
-objects = $(DL_FILE)
-
-$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-
-$(DL_FILE)_MD5 = cac7ba8de3e2e6aa46918e0c76df7d67
-
-install : $(TARGET)
-
-check : $(patsubst %,$(DIR_CHK)/%,$(objects))
-
-download :$(patsubst %,$(DIR_DL)/%,$(objects))
-
-md5 : $(subst %,%_MD5,$(objects))
-
-###############################################################################
-# Downloading, checking, md5sum
-###############################################################################
-
-$(patsubst %,$(DIR_CHK)/%,$(objects)) :
- @$(CHECK)
-
-$(patsubst %,$(DIR_DL)/%,$(objects)) :
- @$(LOAD)
-
-$(subst %,%_MD5,$(objects)) :
- @$(MD5)
-
-###############################################################################
-# Installation Details
-###############################################################################
-
-$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
- @$(PREBUILD)
- @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
- cd $(DIR_APP) && sed -e "s/-Werror//g" -i Makefile
- cd $(DIR_APP) && make $(MAKETUNING)
- cd $(DIR_APP) && make install
- @rm -rf $(DIR_APP)
- @$(POSTBUILD)
--
2.32.0
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 3/6] python-m2crypto: removal of python2 module
2021-06-28 19:13 [PATCH 1/6] make.sh: Remove crda and remaining python2 modules Adolf Belka
2021-06-28 19:13 ` [PATCH 2/6] crda: removal from kernel 4.15 and onwards Adolf Belka
@ 2021-06-28 19:13 ` Adolf Belka
2021-06-28 19:13 ` [PATCH 4/6] python-typing: Removal of this " Adolf Belka
` (3 subsequent siblings)
5 siblings, 0 replies; 15+ messages in thread
From: Adolf Belka @ 2021-06-28 19:13 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 9870 bytes --]
- A python3 version of this module is not required as python-m2crypto is only used for
the build of crda.
Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
---
config/rootfiles/common/python-m2crypto | 98 -------------------------
lfs/python-m2crypto | 83 ---------------------
2 files changed, 181 deletions(-)
delete mode 100644 config/rootfiles/common/python-m2crypto
delete mode 100644 lfs/python-m2crypto
diff --git a/config/rootfiles/common/python-m2crypto b/config/rootfiles/common/python-m2crypto
deleted file mode 100644
index c5477cda3..000000000
--- a/config/rootfiles/common/python-m2crypto
+++ /dev/null
@@ -1,98 +0,0 @@
-#usr/lib/python2.7/site-packages/M2Crypto
-#usr/lib/python2.7/site-packages/M2Crypto-0.27.0-py2.7.egg-info
-#usr/lib/python2.7/site-packages/M2Crypto-0.27.0-py2.7.egg-info/PKG-INFO
-#usr/lib/python2.7/site-packages/M2Crypto-0.27.0-py2.7.egg-info/SOURCES.txt
-#usr/lib/python2.7/site-packages/M2Crypto-0.27.0-py2.7.egg-info/dependency_links.txt
-#usr/lib/python2.7/site-packages/M2Crypto-0.27.0-py2.7.egg-info/requires.txt
-#usr/lib/python2.7/site-packages/M2Crypto-0.27.0-py2.7.egg-info/top_level.txt
-#usr/lib/python2.7/site-packages/M2Crypto/ASN1.py
-#usr/lib/python2.7/site-packages/M2Crypto/ASN1.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/AuthCookie.py
-#usr/lib/python2.7/site-packages/M2Crypto/AuthCookie.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/BIO.py
-#usr/lib/python2.7/site-packages/M2Crypto/BIO.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/BN.py
-#usr/lib/python2.7/site-packages/M2Crypto/BN.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/DH.py
-#usr/lib/python2.7/site-packages/M2Crypto/DH.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/DSA.py
-#usr/lib/python2.7/site-packages/M2Crypto/DSA.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/EC.py
-#usr/lib/python2.7/site-packages/M2Crypto/EC.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/EVP.py
-#usr/lib/python2.7/site-packages/M2Crypto/EVP.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/Engine.py
-#usr/lib/python2.7/site-packages/M2Crypto/Engine.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/Err.py
-#usr/lib/python2.7/site-packages/M2Crypto/Err.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/PGP
-#usr/lib/python2.7/site-packages/M2Crypto/PGP/PublicKey.py
-#usr/lib/python2.7/site-packages/M2Crypto/PGP/PublicKey.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/PGP/PublicKeyRing.py
-#usr/lib/python2.7/site-packages/M2Crypto/PGP/PublicKeyRing.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/PGP/RSA.py
-#usr/lib/python2.7/site-packages/M2Crypto/PGP/RSA.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/PGP/__init__.py
-#usr/lib/python2.7/site-packages/M2Crypto/PGP/__init__.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/PGP/constants.py
-#usr/lib/python2.7/site-packages/M2Crypto/PGP/constants.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/PGP/packet.py
-#usr/lib/python2.7/site-packages/M2Crypto/PGP/packet.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/RC4.py
-#usr/lib/python2.7/site-packages/M2Crypto/RC4.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/RSA.py
-#usr/lib/python2.7/site-packages/M2Crypto/RSA.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/Rand.py
-#usr/lib/python2.7/site-packages/M2Crypto/Rand.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/SMIME.py
-#usr/lib/python2.7/site-packages/M2Crypto/SMIME.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/SSL
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/Checker.py
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/Checker.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/Cipher.py
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/Cipher.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/Connection.py
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/Connection.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/Context.py
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/Context.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/SSLServer.py
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/SSLServer.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/Session.py
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/Session.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/TwistedProtocolWrapper.py
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/TwistedProtocolWrapper.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/__init__.py
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/__init__.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/cb.py
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/cb.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/ssl_dispatcher.py
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/ssl_dispatcher.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/timeout.py
-#usr/lib/python2.7/site-packages/M2Crypto/SSL/timeout.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/X509.py
-#usr/lib/python2.7/site-packages/M2Crypto/X509.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/__init__.py
-#usr/lib/python2.7/site-packages/M2Crypto/__init__.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/_m2crypto.so
-#usr/lib/python2.7/site-packages/M2Crypto/callback.py
-#usr/lib/python2.7/site-packages/M2Crypto/callback.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/ftpslib.py
-#usr/lib/python2.7/site-packages/M2Crypto/ftpslib.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/httpslib.py
-#usr/lib/python2.7/site-packages/M2Crypto/httpslib.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/m2.py
-#usr/lib/python2.7/site-packages/M2Crypto/m2.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/m2crypto.py
-#usr/lib/python2.7/site-packages/M2Crypto/m2crypto.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/m2urllib.py
-#usr/lib/python2.7/site-packages/M2Crypto/m2urllib.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/m2urllib2.py
-#usr/lib/python2.7/site-packages/M2Crypto/m2urllib2.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/m2xmlrpclib.py
-#usr/lib/python2.7/site-packages/M2Crypto/m2xmlrpclib.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/six.py
-#usr/lib/python2.7/site-packages/M2Crypto/six.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/threading.py
-#usr/lib/python2.7/site-packages/M2Crypto/threading.pyc
-#usr/lib/python2.7/site-packages/M2Crypto/util.py
-#usr/lib/python2.7/site-packages/M2Crypto/util.pyc
diff --git a/lfs/python-m2crypto b/lfs/python-m2crypto
deleted file mode 100644
index de004bfd9..000000000
--- a/lfs/python-m2crypto
+++ /dev/null
@@ -1,83 +0,0 @@
-###############################################################################
-# #
-# IPFire.org - A linux based firewall #
-# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> #
-# #
-# This program is free software: you can redistribute it and/or modify #
-# it under the terms of the GNU General Public License as published by #
-# the Free Software Foundation, either version 3 of the License, or #
-# (at your option) any later version. #
-# #
-# This program is distributed in the hope that it will be useful, #
-# but WITHOUT ANY WARRANTY; without even the implied warranty of #
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
-# GNU General Public License for more details. #
-# #
-# You should have received a copy of the GNU General Public License #
-# along with this program. If not, see <http://www.gnu.org/licenses/>. #
-# #
-###############################################################################
-
-###############################################################################
-# Definitions
-###############################################################################
-
-include Config
-
-VER = 0.27.0
-
-THISAPP = M2Crypto-$(VER)
-DL_FILE = $(THISAPP).tar.gz
-DL_FROM = $(URL_IPFIRE)
-DIR_APP = $(DIR_SRC)/$(THISAPP)
-TARGET = $(DIR_INFO)/$(THISAPP)
-#PROG = python-m2crypto
-#PAK_VER = 1
-
-#DEPS =
-
-###############################################################################
-# Top-level Rules
-###############################################################################
-
-objects = $(DL_FILE)
-
-$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-
-$(DL_FILE)_MD5 = 4477bd6b2835560c73982476dba5e515
-
-install : $(TARGET)
-
-check : $(patsubst %,$(DIR_CHK)/%,$(objects))
-
-download :$(patsubst %,$(DIR_DL)/%,$(objects))
-
-md5 : $(subst %,%_MD5,$(objects))
-
-#dist:
-# @$(PAK)
-
-###############################################################################
-# Downloading, checking, md5sum
-###############################################################################
-
-$(patsubst %,$(DIR_CHK)/%,$(objects)) :
- @$(CHECK)
-
-$(patsubst %,$(DIR_DL)/%,$(objects)) :
- @$(LOAD)
-
-$(subst %,%_MD5,$(objects)) :
- @$(MD5)
-
-###############################################################################
-# Installation Details
-###############################################################################
-
-$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
- @$(PREBUILD)
- @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE)
- cd $(DIR_APP) && python setup.py build
- cd $(DIR_APP) && python setup.py install --root=/
- @rm -rf $(DIR_APP)
- @$(POSTBUILD)
--
2.32.0
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 4/6] python-typing: Removal of this python2 module.
2021-06-28 19:13 [PATCH 1/6] make.sh: Remove crda and remaining python2 modules Adolf Belka
2021-06-28 19:13 ` [PATCH 2/6] crda: removal from kernel 4.15 and onwards Adolf Belka
2021-06-28 19:13 ` [PATCH 3/6] python-m2crypto: removal of python2 module Adolf Belka
@ 2021-06-28 19:13 ` Adolf Belka
2021-06-28 19:13 ` [PATCH 5/6] python-setuptools: " Adolf Belka
` (2 subsequent siblings)
5 siblings, 0 replies; 15+ messages in thread
From: Adolf Belka @ 2021-06-28 19:13 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 4337 bytes --]
- With the removal of python-m2crypto then python-typing is no longer rerquired as a
dependency.
- The functionality of the python2 typing module is built in to python3.
Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
---
config/rootfiles/common/python-typing | 3 -
lfs/python-typing | 79 ---------------------------
2 files changed, 82 deletions(-)
delete mode 100644 config/rootfiles/common/python-typing
delete mode 100644 lfs/python-typing
diff --git a/config/rootfiles/common/python-typing b/config/rootfiles/common/python-typing
deleted file mode 100644
index 519796ca4..000000000
--- a/config/rootfiles/common/python-typing
+++ /dev/null
@@ -1,3 +0,0 @@
-#usr/lib/python2.7/site-packages/typing-3.6.1-py2.7.egg-info
-#usr/lib/python2.7/site-packages/typing.py
-#usr/lib/python2.7/site-packages/typing.pyc
diff --git a/lfs/python-typing b/lfs/python-typing
deleted file mode 100644
index d7bbe412b..000000000
--- a/lfs/python-typing
+++ /dev/null
@@ -1,79 +0,0 @@
-###############################################################################
-# #
-# IPFire.org - A linux based firewall #
-# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> #
-# #
-# This program is free software: you can redistribute it and/or modify #
-# it under the terms of the GNU General Public License as published by #
-# the Free Software Foundation, either version 3 of the License, or #
-# (at your option) any later version. #
-# #
-# This program is distributed in the hope that it will be useful, #
-# but WITHOUT ANY WARRANTY; without even the implied warranty of #
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
-# GNU General Public License for more details. #
-# #
-# You should have received a copy of the GNU General Public License #
-# along with this program. If not, see <http://www.gnu.org/licenses/>. #
-# #
-###############################################################################
-
-###############################################################################
-# Definitions
-###############################################################################
-
-include Config
-
-VER = 3.6.1
-
-THISAPP = typing-$(VER)
-DL_FILE = $(THISAPP).tar.gz
-DL_FROM = $(URL_IPFIRE)
-DIR_APP = $(DIR_SRC)/$(THISAPP)
-TARGET = $(DIR_INFO)/$(THISAPP)
-
-###############################################################################
-# Top-level Rules
-###############################################################################
-
-objects = $(DL_FILE)
-
-$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-
-$(DL_FILE)_MD5 = 3fec97415bae6f742fb3c3013dedeb89
-
-install : $(TARGET)
-
-check : $(patsubst %,$(DIR_CHK)/%,$(objects))
-
-download :$(patsubst %,$(DIR_DL)/%,$(objects))
-
-md5 : $(subst %,%_MD5,$(objects))
-
-#dist:
-# @$(PAK)
-
-###############################################################################
-# Downloading, checking, md5sum
-###############################################################################
-
-$(patsubst %,$(DIR_CHK)/%,$(objects)) :
- @$(CHECK)
-
-$(patsubst %,$(DIR_DL)/%,$(objects)) :
- @$(LOAD)
-
-$(subst %,%_MD5,$(objects)) :
- @$(MD5)
-
-###############################################################################
-# Installation Details
-###############################################################################
-
-$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
- @$(PREBUILD)
- @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE)
- cd $(DIR_APP) && python setup.py build
- cd $(DIR_APP) && python setup.py install --skip-build
- @rm -rf $(DIR_APP)
- @$(POSTBUILD)
--
2.32.0
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 5/6] python-setuptools: Removal of this python2 module.
2021-06-28 19:13 [PATCH 1/6] make.sh: Remove crda and remaining python2 modules Adolf Belka
` (2 preceding siblings ...)
2021-06-28 19:13 ` [PATCH 4/6] python-typing: Removal of this " Adolf Belka
@ 2021-06-28 19:13 ` Adolf Belka
2021-06-28 19:14 ` [PATCH 6/6] ipaddr: " Adolf Belka
2021-07-05 16:39 ` [PATCH 1/6] make.sh: Remove crda and remaining python2 modules Michael Tremer
5 siblings, 0 replies; 15+ messages in thread
From: Adolf Belka @ 2021-06-28 19:13 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 4336 bytes --]
- With the removal of python-m2crypto then this module is not longer required as a
dependency.
- python3-setuptools was already released into Core Update 157
Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
---
config/rootfiles/common/python-setuptools | 5 --
lfs/python-setuptools | 80 -----------------------
2 files changed, 85 deletions(-)
delete mode 100644 config/rootfiles/common/python-setuptools
delete mode 100644 lfs/python-setuptools
diff --git a/config/rootfiles/common/python-setuptools b/config/rootfiles/common/python-setuptools
deleted file mode 100644
index 15b22ac39..000000000
--- a/config/rootfiles/common/python-setuptools
+++ /dev/null
@@ -1,5 +0,0 @@
-#usr/bin/easy_install
-#usr/bin/easy_install-2.7
-#usr/lib/python2.7/site-packages/easy-install.pth
-#usr/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg
-#usr/lib/python2.7/site-packages/setuptools.pth
diff --git a/lfs/python-setuptools b/lfs/python-setuptools
deleted file mode 100644
index 1ffcfca18..000000000
--- a/lfs/python-setuptools
+++ /dev/null
@@ -1,80 +0,0 @@
-###############################################################################
-# #
-# IPFire.org - A linux based firewall #
-# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> #
-# #
-# This program is free software: you can redistribute it and/or modify #
-# it under the terms of the GNU General Public License as published by #
-# the Free Software Foundation, either version 3 of the License, or #
-# (at your option) any later version. #
-# #
-# This program is distributed in the hope that it will be useful, #
-# but WITHOUT ANY WARRANTY; without even the implied warranty of #
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
-# GNU General Public License for more details. #
-# #
-# You should have received a copy of the GNU General Public License #
-# along with this program. If not, see <http://www.gnu.org/licenses/>. #
-# #
-###############################################################################
-
-###############################################################################
-# Definitions
-###############################################################################
-
-include Config
-
-VER = 0.6c11
-
-THISAPP = setuptools-$(VER)
-DL_FILE = $(THISAPP)-py2.7.egg
-DL_FROM = $(URL_IPFIRE)
-DIR_APP = $(DIR_SRC)/$(THISAPP)
-TARGET = $(DIR_INFO)/$(THISAPP)
-PROG = python-setuptools
-PAK_VER = 2
-
-DEPS =
-
-###############################################################################
-# Top-level Rules
-###############################################################################
-
-objects = $(DL_FILE)
-
-$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-
-$(DL_FILE)_MD5 = fe1f997bc722265116870bc7919059ea
-
-install : $(TARGET)
-
-check : $(patsubst %,$(DIR_CHK)/%,$(objects))
-
-download :$(patsubst %,$(DIR_DL)/%,$(objects))
-
-md5 : $(subst %,%_MD5,$(objects))
-
-dist:
- @$(PAK)
-
-###############################################################################
-# Downloading, checking, md5sum
-###############################################################################
-
-$(patsubst %,$(DIR_CHK)/%,$(objects)) :
- @$(CHECK)
-
-$(patsubst %,$(DIR_DL)/%,$(objects)) :
- @$(LOAD)
-
-$(subst %,%_MD5,$(objects)) :
- @$(MD5)
-
-###############################################################################
-# Installation Details
-###############################################################################
-
-$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
- @$(PREBUILD)
- bash $(DIR_DL)/$(DL_FILE)
- @$(POSTBUILD)
--
2.32.0
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 6/6] ipaddr: Removal of this python2 module
2021-06-28 19:13 [PATCH 1/6] make.sh: Remove crda and remaining python2 modules Adolf Belka
` (3 preceding siblings ...)
2021-06-28 19:13 ` [PATCH 5/6] python-setuptools: " Adolf Belka
@ 2021-06-28 19:14 ` Adolf Belka
2021-07-05 16:39 ` [PATCH 1/6] make.sh: Remove crda and remaining python2 modules Michael Tremer
5 siblings, 0 replies; 15+ messages in thread
From: Adolf Belka @ 2021-06-28 19:14 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 4043 bytes --]
- python3 has this functionality built in with ipaddress.py
Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
---
config/rootfiles/common/ipaddr | 2 -
lfs/ipaddr | 76 ----------------------------------
2 files changed, 78 deletions(-)
delete mode 100644 config/rootfiles/common/ipaddr
delete mode 100644 lfs/ipaddr
diff --git a/config/rootfiles/common/ipaddr b/config/rootfiles/common/ipaddr
deleted file mode 100644
index 17998ccc2..000000000
--- a/config/rootfiles/common/ipaddr
+++ /dev/null
@@ -1,2 +0,0 @@
-#usr/lib/python2.7/ipaddr.py
-usr/lib/python2.7/ipaddr.pyc
diff --git a/lfs/ipaddr b/lfs/ipaddr
deleted file mode 100644
index d5d28229b..000000000
--- a/lfs/ipaddr
+++ /dev/null
@@ -1,76 +0,0 @@
-###############################################################################
-# #
-# IPFire.org - A linux based firewall #
-# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> #
-# #
-# This program is free software: you can redistribute it and/or modify #
-# it under the terms of the GNU General Public License as published by #
-# the Free Software Foundation, either version 3 of the License, or #
-# (at your option) any later version. #
-# #
-# This program is distributed in the hope that it will be useful, #
-# but WITHOUT ANY WARRANTY; without even the implied warranty of #
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
-# GNU General Public License for more details. #
-# #
-# You should have received a copy of the GNU General Public License #
-# along with this program. If not, see <http://www.gnu.org/licenses/>. #
-# #
-###############################################################################
-
-###############################################################################
-# Definitions
-###############################################################################
-
-include Config
-
-VER = 1.2
-
-THISAPP = ipaddr-$(VER)
-DL_FILE = $(THISAPP).tar.gz
-DL_FROM = $(URL_IPFIRE)
-DIR_APP = $(DIR_SRC)/$(THISAPP)
-TARGET = $(DIR_INFO)/$(THISAPP)
-
-###############################################################################
-# Top-level Rules
-###############################################################################
-
-objects = $(DL_FILE)
-
-$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-
-$(DL_FILE)_MD5 = 239a3725a3dd6a1d1e369b75144e617e
-
-install : $(TARGET)
-
-check : $(patsubst %,$(DIR_CHK)/%,$(objects))
-
-download :$(patsubst %,$(DIR_DL)/%,$(objects))
-
-md5 : $(subst %,%_MD5,$(objects))
-
-###############################################################################
-# Downloading, checking, md5sum
-###############################################################################
-
-$(patsubst %,$(DIR_CHK)/%,$(objects)) :
- @$(CHECK)
-
-$(patsubst %,$(DIR_DL)/%,$(objects)) :
- @$(LOAD)
-
-$(subst %,%_MD5,$(objects)) :
- @$(MD5)
-
-###############################################################################
-# Installation Details
-###############################################################################
-
-$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
- @$(PREBUILD)
- @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE)
- cd $(DIR_APP) && install -m 0644 ipaddr.py /usr/lib/python2*
- /usr/bin/python -c "import ipaddr"
- @rm -rf $(DIR_APP)
- @$(POSTBUILD)
--
2.32.0
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 1/6] make.sh: Remove crda and remaining python2 modules
2021-06-28 19:13 [PATCH 1/6] make.sh: Remove crda and remaining python2 modules Adolf Belka
` (4 preceding siblings ...)
2021-06-28 19:14 ` [PATCH 6/6] ipaddr: " Adolf Belka
@ 2021-07-05 16:39 ` Michael Tremer
5 siblings, 0 replies; 15+ messages in thread
From: Michael Tremer @ 2021-07-05 16:39 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 2314 bytes --]
Hello,
I can ack this, that we can drop CRDA entirely. We only need to keep the wireless-regdb.
Acked-by: Michael Tremer <michael.tremer(a)ipfire.org>
I cannot think of anything that would use the dropped Python modules.
Great work Adolf!
Best,
-Michael
> On 28 Jun 2021, at 20:13, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>
> - crda only works with python2 version of m2crypto
> python-m2crypto requires python-setuptools and python-typing
> - With Linux kernel 4.15 and later the country code status check that crda did is built
> into the kernel.
> - So from kernel 4.15, crda can be removed, which allows removal of m2crypto, setuptools
> and typing.
> - python-typing is built into python3 so no additional python3 module required.
> - python3 version of python-setuptools has already been installed.
> - python3 version of python-m2crypto is not required. python-m2crypto is only used for the
> build of crda.
> - ipaddr can be removed as the function of this python2 module is built into python3 with
> ipaddress.py
> - removal of crda tested with 5.10.45 kernel and the setting of a country code was
> recognised. If this test carried out with crda removed and 4.14.232 kernel then country
> code stays defined as the global code "00".
>
> Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
> ---
> make.sh | 5 -----
> 1 file changed, 5 deletions(-)
>
> diff --git a/make.sh b/make.sh
> index fc03ebcd5..f8767bad9 100755
> --- a/make.sh
> +++ b/make.sh
> @@ -1307,7 +1307,6 @@ buildipfire() {
> lfsmake2 whatmask
> lfsmake2 libtirpc
> lfsmake2 conntrack-tools
> - lfsmake2 ipaddr
> lfsmake2 iputils
> lfsmake2 l7-protocols
> lfsmake2 hwdata
> @@ -1344,7 +1343,6 @@ buildipfire() {
> lfsmake2 XML-Parser
> lfsmake2 Crypt-PasswdMD5
> lfsmake2 Net-Telnet
> - lfsmake2 python-setuptools
> lfsmake2 python3-setuptools
> lfsmake2 python3-inotify
> lfsmake2 python3-docutils
> @@ -1527,10 +1525,7 @@ buildipfire() {
> lfsmake2 swig
> lfsmake2 u-boot
> lfsmake2 u-boot-friendlyarm
> - lfsmake2 python-typing
> - lfsmake2 python-m2crypto
> lfsmake2 wireless-regdb
> - lfsmake2 crda
> lfsmake2 libsolv
> lfsmake2 ddns
> lfsmake2 python3-setuptools-scm
> --
> 2.32.0
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/6] crda: removal from kernel 4.15 and onwards.
2021-06-28 19:13 ` [PATCH 2/6] crda: removal from kernel 4.15 and onwards Adolf Belka
@ 2021-07-09 6:26 ` Arne Fitzenreiter
2021-07-09 10:20 ` Adolf Belka
0 siblings, 1 reply; 15+ messages in thread
From: Arne Fitzenreiter @ 2021-07-09 6:26 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 5391 bytes --]
Removing regdump from crda package will break the hostapd webif because
this is used to
generate the countrylist from wireless-regdb.
Arne
Am 2021-06-28 21:13, schrieb Adolf Belka:
> - From kernel 4.15 and onwards the function of what crda does is built
> into the kernel.
> - Tested the removal of crda with kernel 4.14.232 and kernel 5.10.45
> Country code set by "iw reg set NL" was recognised with kernel
> 5.10.45 and set at
> the global value of 00 with kernel 4.14.232 confirming the kernel
> built in option is
> working without the prescence of crda
>
> Tested-by: Adolf Belka <adolf.belka(a)ipfire.org>
> Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
> ---
> config/rootfiles/common/crda | 14 -------
> lfs/crda | 78 ------------------------------------
> 2 files changed, 92 deletions(-)
> delete mode 100644 config/rootfiles/common/crda
> delete mode 100644 lfs/crda
>
> diff --git a/config/rootfiles/common/crda
> b/config/rootfiles/common/crda
> deleted file mode 100644
> index 5f93bc254..000000000
> --- a/config/rootfiles/common/crda
> +++ /dev/null
> @@ -1,14 +0,0 @@
> -lib/udev/rules.d/85-regulatory.rules
> -#root/.python-eggs
> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp
> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto
> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto/__m2crypto.so
> -sbin/crda
> -sbin/regdbdump
> -#usr/include/reglib
> -#usr/include/reglib/nl80211.h
> -#usr/include/reglib/regdb.h
> -#usr/include/reglib/reglib.h
> -usr/lib/libreg.so
> -#usr/share/man/man8/crda.8.gz
> -#usr/share/man/man8/regdbdump.8.gz
> diff --git a/lfs/crda b/lfs/crda
> deleted file mode 100644
> index bd812942e..000000000
> --- a/lfs/crda
> +++ /dev/null
> @@ -1,78 +0,0 @@
> -###############################################################################
> -#
> #
> -# IPFire.org - A linux based firewall
> #
> -# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org>
> #
> -#
> #
> -# This program is free software: you can redistribute it and/or modify
> #
> -# it under the terms of the GNU General Public License as published by
> #
> -# the Free Software Foundation, either version 3 of the License, or
> #
> -# (at your option) any later version.
> #
> -#
> #
> -# This program is distributed in the hope that it will be useful,
> #
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> #
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> #
> -# GNU General Public License for more details.
> #
> -#
> #
> -# You should have received a copy of the GNU General Public License
> #
> -# along with this program. If not, see
> <http://www.gnu.org/licenses/>. #
> -#
> #
> -###############################################################################
> -
> -###############################################################################
> -# Definitions
> -###############################################################################
> -
> -include Config
> -
> -VER = 4.14
> -
> -THISAPP = crda-$(VER)
> -DL_FILE = $(THISAPP).tar.gz
> -DL_FROM = $(URL_IPFIRE)
> -DIR_APP = $(DIR_SRC)/$(THISAPP)
> -
> -TARGET = $(DIR_INFO)/$(THISAPP)
> -
> -###############################################################################
> -# Top-level Rules
> -###############################################################################
> -
> -objects = $(DL_FILE)
> -
> -$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
> -
> -$(DL_FILE)_MD5 = cac7ba8de3e2e6aa46918e0c76df7d67
> -
> -install : $(TARGET)
> -
> -check : $(patsubst %,$(DIR_CHK)/%,$(objects))
> -
> -download :$(patsubst %,$(DIR_DL)/%,$(objects))
> -
> -md5 : $(subst %,%_MD5,$(objects))
> -
> -###############################################################################
> -# Downloading, checking, md5sum
> -###############################################################################
> -
> -$(patsubst %,$(DIR_CHK)/%,$(objects)) :
> - @$(CHECK)
> -
> -$(patsubst %,$(DIR_DL)/%,$(objects)) :
> - @$(LOAD)
> -
> -$(subst %,%_MD5,$(objects)) :
> - @$(MD5)
> -
> -###############################################################################
> -# Installation Details
> -###############################################################################
> -
> -$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
> - @$(PREBUILD)
> - @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
> - cd $(DIR_APP) && sed -e "s/-Werror//g" -i Makefile
> - cd $(DIR_APP) && make $(MAKETUNING)
> - cd $(DIR_APP) && make install
> - @rm -rf $(DIR_APP)
> - @$(POSTBUILD)
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/6] crda: removal from kernel 4.15 and onwards.
2021-07-09 6:26 ` Arne Fitzenreiter
@ 2021-07-09 10:20 ` Adolf Belka
2021-07-10 7:25 ` Arne Fitzenreiter
0 siblings, 1 reply; 15+ messages in thread
From: Adolf Belka @ 2021-07-09 10:20 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 5980 bytes --]
Hi Arne,
On 09/07/2021 08:26, Arne Fitzenreiter wrote:
> Removing regdump from crda package will break the hostapd webif because
> this is used to
> generate the countrylist from wireless-regdb.
I thought things had gone too smoothly. Oh well.
I have searched in the hostapd mail list for crda in the subject.
Nothing found all the way back to mid 2020 when there was a two year
break in any mails listed.
I can't find any way to search the body of the mails for any mention of
crda and doing a google search for "hostapd crda" didn't flag anything
useful up.
So I think I need to mail the hostapd list to see what their plans are
to not use crda (with its python2 dependency) in hostapd.
Does anyone have any other thoughts on how to deal with this?
Regards,
Adolf.
>
> Arne
>
> Am 2021-06-28 21:13, schrieb Adolf Belka:
>> - From kernel 4.15 and onwards the function of what crda does is built
>> into the kernel.
>> - Tested the removal of crda with kernel 4.14.232 and kernel 5.10.45
>> Country code set by "iw reg set NL" was recognised with kernel
>> 5.10.45 and set at
>> the global value of 00 with kernel 4.14.232 confirming the kernel
>> built in option is
>> working without the prescence of crda
>>
>> Tested-by: Adolf Belka <adolf.belka(a)ipfire.org>
>> Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
>> ---
>> config/rootfiles/common/crda | 14 -------
>> lfs/crda | 78 ------------------------------------
>> 2 files changed, 92 deletions(-)
>> delete mode 100644 config/rootfiles/common/crda
>> delete mode 100644 lfs/crda
>>
>> diff --git a/config/rootfiles/common/crda b/config/rootfiles/common/crda
>> deleted file mode 100644
>> index 5f93bc254..000000000
>> --- a/config/rootfiles/common/crda
>> +++ /dev/null
>> @@ -1,14 +0,0 @@
>> -lib/udev/rules.d/85-regulatory.rules
>> -#root/.python-eggs
>> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp
>> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto
>>
>> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto/__m2crypto.so
>>
>> -sbin/crda
>> -sbin/regdbdump
>> -#usr/include/reglib
>> -#usr/include/reglib/nl80211.h
>> -#usr/include/reglib/regdb.h
>> -#usr/include/reglib/reglib.h
>> -usr/lib/libreg.so
>> -#usr/share/man/man8/crda.8.gz
>> -#usr/share/man/man8/regdbdump.8.gz
>> diff --git a/lfs/crda b/lfs/crda
>> deleted file mode 100644
>> index bd812942e..000000000
>> --- a/lfs/crda
>> +++ /dev/null
>> @@ -1,78 +0,0 @@
>> -###############################################################################
>>
>> -# #
>> -# IPFire.org - A linux based firewall #
>> -# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> #
>> -# #
>> -# This program is free software: you can redistribute it and/or
>> modify #
>> -# it under the terms of the GNU General Public License as published
>> by #
>> -# the Free Software Foundation, either version 3 of the License, or
>> #
>> -# (at your option) any later version. #
>> -# #
>> -# This program is distributed in the hope that it will be useful,
>> #
>> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> #
>> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>> -# GNU General Public License for more details. #
>> -# #
>> -# You should have received a copy of the GNU General Public License
>> #
>> -# along with this program. If not, see
>> <http://www.gnu.org/licenses/>. #
>> -# #
>> -###############################################################################
>>
>> -
>> -###############################################################################
>>
>> -# Definitions
>> -###############################################################################
>>
>> -
>> -include Config
>> -
>> -VER = 4.14
>> -
>> -THISAPP = crda-$(VER)
>> -DL_FILE = $(THISAPP).tar.gz
>> -DL_FROM = $(URL_IPFIRE)
>> -DIR_APP = $(DIR_SRC)/$(THISAPP)
>> -
>> -TARGET = $(DIR_INFO)/$(THISAPP)
>> -
>> -###############################################################################
>>
>> -# Top-level Rules
>> -###############################################################################
>>
>> -
>> -objects = $(DL_FILE)
>> -
>> -$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>> -
>> -$(DL_FILE)_MD5 = cac7ba8de3e2e6aa46918e0c76df7d67
>> -
>> -install : $(TARGET)
>> -
>> -check : $(patsubst %,$(DIR_CHK)/%,$(objects))
>> -
>> -download :$(patsubst %,$(DIR_DL)/%,$(objects))
>> -
>> -md5 : $(subst %,%_MD5,$(objects))
>> -
>> -###############################################################################
>>
>> -# Downloading, checking, md5sum
>> -###############################################################################
>>
>> -
>> -$(patsubst %,$(DIR_CHK)/%,$(objects)) :
>> - @$(CHECK)
>> -
>> -$(patsubst %,$(DIR_DL)/%,$(objects)) :
>> - @$(LOAD)
>> -
>> -$(subst %,%_MD5,$(objects)) :
>> - @$(MD5)
>> -
>> -###############################################################################
>>
>> -# Installation Details
>> -###############################################################################
>>
>> -
>> -$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>> - @$(PREBUILD)
>> - @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
>> - cd $(DIR_APP) && sed -e "s/-Werror//g" -i Makefile
>> - cd $(DIR_APP) && make $(MAKETUNING)
>> - cd $(DIR_APP) && make install
>> - @rm -rf $(DIR_APP)
>> - @$(POSTBUILD)
--
Sent from my laptop
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/6] crda: removal from kernel 4.15 and onwards.
2021-07-09 10:20 ` Adolf Belka
@ 2021-07-10 7:25 ` Arne Fitzenreiter
2021-07-10 11:17 ` Adolf Belka
0 siblings, 1 reply; 15+ messages in thread
From: Arne Fitzenreiter @ 2021-07-10 7:25 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 6337 bytes --]
It's not hostapd itself. It's the cgi that use regdump to generate some
lists.
There must be a way to get this list from wireless-regdb. Or we can
generate and ship it.
Arne
Am 2021-07-09 12:20, schrieb Adolf Belka:
> Hi Arne,
>
> On 09/07/2021 08:26, Arne Fitzenreiter wrote:
>> Removing regdump from crda package will break the hostapd webif
>> because this is used to
>> generate the countrylist from wireless-regdb.
> I thought things had gone too smoothly. Oh well.
>
> I have searched in the hostapd mail list for crda in the subject.
> Nothing found all the way back to mid 2020 when there was a two year
> break in any mails listed.
>
> I can't find any way to search the body of the mails for any mention
> of crda and doing a google search for "hostapd crda" didn't flag
> anything useful up.
>
> So I think I need to mail the hostapd list to see what their plans are
> to not use crda (with its python2 dependency) in hostapd.
>
> Does anyone have any other thoughts on how to deal with this?
>
> Regards,
>
> Adolf.
>>
>> Arne
>>
>> Am 2021-06-28 21:13, schrieb Adolf Belka:
>>> - From kernel 4.15 and onwards the function of what crda does is
>>> built
>>> into the kernel.
>>> - Tested the removal of crda with kernel 4.14.232 and kernel 5.10.45
>>> Country code set by "iw reg set NL" was recognised with kernel
>>> 5.10.45 and set at
>>> the global value of 00 with kernel 4.14.232 confirming the kernel
>>> built in option is
>>> working without the prescence of crda
>>>
>>> Tested-by: Adolf Belka <adolf.belka(a)ipfire.org>
>>> Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
>>> ---
>>> config/rootfiles/common/crda | 14 -------
>>> lfs/crda | 78
>>> ------------------------------------
>>> 2 files changed, 92 deletions(-)
>>> delete mode 100644 config/rootfiles/common/crda
>>> delete mode 100644 lfs/crda
>>>
>>> diff --git a/config/rootfiles/common/crda
>>> b/config/rootfiles/common/crda
>>> deleted file mode 100644
>>> index 5f93bc254..000000000
>>> --- a/config/rootfiles/common/crda
>>> +++ /dev/null
>>> @@ -1,14 +0,0 @@
>>> -lib/udev/rules.d/85-regulatory.rules
>>> -#root/.python-eggs
>>> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp
>>> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto
>>> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto/__m2crypto.so
>>> -sbin/crda
>>> -sbin/regdbdump
>>> -#usr/include/reglib
>>> -#usr/include/reglib/nl80211.h
>>> -#usr/include/reglib/regdb.h
>>> -#usr/include/reglib/reglib.h
>>> -usr/lib/libreg.so
>>> -#usr/share/man/man8/crda.8.gz
>>> -#usr/share/man/man8/regdbdump.8.gz
>>> diff --git a/lfs/crda b/lfs/crda
>>> deleted file mode 100644
>>> index bd812942e..000000000
>>> --- a/lfs/crda
>>> +++ /dev/null
>>> @@ -1,78 +0,0 @@
>>> -###############################################################################
>>> -# #
>>> -# IPFire.org - A linux based firewall #
>>> -# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> #
>>> -# #
>>> -# This program is free software: you can redistribute it and/or
>>> modify #
>>> -# it under the terms of the GNU General Public License as published
>>> by #
>>> -# the Free Software Foundation, either version 3 of the License, or
>>> #
>>> -# (at your option) any later version. #
>>> -# #
>>> -# This program is distributed in the hope that it will be useful,
>>> #
>>> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> #
>>> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> #
>>> -# GNU General Public License for more details. #
>>> -# #
>>> -# You should have received a copy of the GNU General Public License
>>> #
>>> -# along with this program. If not, see
>>> <http://www.gnu.org/licenses/>. #
>>> -# #
>>> -###############################################################################
>>> -
>>> -###############################################################################
>>> -# Definitions
>>> -###############################################################################
>>> -
>>> -include Config
>>> -
>>> -VER = 4.14
>>> -
>>> -THISAPP = crda-$(VER)
>>> -DL_FILE = $(THISAPP).tar.gz
>>> -DL_FROM = $(URL_IPFIRE)
>>> -DIR_APP = $(DIR_SRC)/$(THISAPP)
>>> -
>>> -TARGET = $(DIR_INFO)/$(THISAPP)
>>> -
>>> -###############################################################################
>>> -# Top-level Rules
>>> -###############################################################################
>>> -
>>> -objects = $(DL_FILE)
>>> -
>>> -$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>>> -
>>> -$(DL_FILE)_MD5 = cac7ba8de3e2e6aa46918e0c76df7d67
>>> -
>>> -install : $(TARGET)
>>> -
>>> -check : $(patsubst %,$(DIR_CHK)/%,$(objects))
>>> -
>>> -download :$(patsubst %,$(DIR_DL)/%,$(objects))
>>> -
>>> -md5 : $(subst %,%_MD5,$(objects))
>>> -
>>> -###############################################################################
>>> -# Downloading, checking, md5sum
>>> -###############################################################################
>>> -
>>> -$(patsubst %,$(DIR_CHK)/%,$(objects)) :
>>> - @$(CHECK)
>>> -
>>> -$(patsubst %,$(DIR_DL)/%,$(objects)) :
>>> - @$(LOAD)
>>> -
>>> -$(subst %,%_MD5,$(objects)) :
>>> - @$(MD5)
>>> -
>>> -###############################################################################
>>> -# Installation Details
>>> -###############################################################################
>>> -
>>> -$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>>> - @$(PREBUILD)
>>> - @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf
>>> $(DIR_DL)/$(DL_FILE)
>>> - cd $(DIR_APP) && sed -e "s/-Werror//g" -i Makefile
>>> - cd $(DIR_APP) && make $(MAKETUNING)
>>> - cd $(DIR_APP) && make install
>>> - @rm -rf $(DIR_APP)
>>> - @$(POSTBUILD)
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/6] crda: removal from kernel 4.15 and onwards.
2021-07-10 7:25 ` Arne Fitzenreiter
@ 2021-07-10 11:17 ` Adolf Belka
2021-07-11 11:29 ` Adolf Belka
0 siblings, 1 reply; 15+ messages in thread
From: Adolf Belka @ 2021-07-10 11:17 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 6791 bytes --]
Hi Arne,
On 10/07/2021 09:25, Arne Fitzenreiter wrote:
> It's not hostapd itself. It's the cgi that use regdump to generate some
> lists.
Thanks for the clarification.
> There must be a way to get this list from wireless-regdb. Or we can
> generate and ship it.
I will have a look at this then and see if I can figure something out.
If I am unable to then someone else may need to have a go but I will try
to start with.
Regards,
Adolf.
>
> Arne
>
> Am 2021-07-09 12:20, schrieb Adolf Belka:
>> Hi Arne,
>>
>> On 09/07/2021 08:26, Arne Fitzenreiter wrote:
>>> Removing regdump from crda package will break the hostapd webif
>>> because this is used to
>>> generate the countrylist from wireless-regdb.
>> I thought things had gone too smoothly. Oh well.
>>
>> I have searched in the hostapd mail list for crda in the subject.
>> Nothing found all the way back to mid 2020 when there was a two year
>> break in any mails listed.
>>
>> I can't find any way to search the body of the mails for any mention
>> of crda and doing a google search for "hostapd crda" didn't flag
>> anything useful up.
>>
>> So I think I need to mail the hostapd list to see what their plans are
>> to not use crda (with its python2 dependency) in hostapd.
>>
>> Does anyone have any other thoughts on how to deal with this?
>>
>> Regards,
>>
>> Adolf.
>>>
>>> Arne
>>>
>>> Am 2021-06-28 21:13, schrieb Adolf Belka:
>>>> - From kernel 4.15 and onwards the function of what crda does is built
>>>> into the kernel.
>>>> - Tested the removal of crda with kernel 4.14.232 and kernel 5.10.45
>>>> Country code set by "iw reg set NL" was recognised with kernel
>>>> 5.10.45 and set at
>>>> the global value of 00 with kernel 4.14.232 confirming the kernel
>>>> built in option is
>>>> working without the prescence of crda
>>>>
>>>> Tested-by: Adolf Belka <adolf.belka(a)ipfire.org>
>>>> Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
>>>> ---
>>>> config/rootfiles/common/crda | 14 -------
>>>> lfs/crda | 78 ------------------------------------
>>>> 2 files changed, 92 deletions(-)
>>>> delete mode 100644 config/rootfiles/common/crda
>>>> delete mode 100644 lfs/crda
>>>>
>>>> diff --git a/config/rootfiles/common/crda
>>>> b/config/rootfiles/common/crda
>>>> deleted file mode 100644
>>>> index 5f93bc254..000000000
>>>> --- a/config/rootfiles/common/crda
>>>> +++ /dev/null
>>>> @@ -1,14 +0,0 @@
>>>> -lib/udev/rules.d/85-regulatory.rules
>>>> -#root/.python-eggs
>>>> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp
>>>> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto
>>>> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto/__m2crypto.so
>>>> -sbin/crda
>>>> -sbin/regdbdump
>>>> -#usr/include/reglib
>>>> -#usr/include/reglib/nl80211.h
>>>> -#usr/include/reglib/regdb.h
>>>> -#usr/include/reglib/reglib.h
>>>> -usr/lib/libreg.so
>>>> -#usr/share/man/man8/crda.8.gz
>>>> -#usr/share/man/man8/regdbdump.8.gz
>>>> diff --git a/lfs/crda b/lfs/crda
>>>> deleted file mode 100644
>>>> index bd812942e..000000000
>>>> --- a/lfs/crda
>>>> +++ /dev/null
>>>> @@ -1,78 +0,0 @@
>>>> -###############################################################################
>>>> -# #
>>>> -# IPFire.org - A linux based firewall #
>>>> -# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> #
>>>> -# #
>>>> -# This program is free software: you can redistribute it and/or
>>>> modify #
>>>> -# it under the terms of the GNU General Public License as published
>>>> by #
>>>> -# the Free Software Foundation, either version 3 of the License, or
>>>> #
>>>> -# (at your option) any later version. #
>>>> -# #
>>>> -# This program is distributed in the hope that it will be useful,
>>>> #
>>>> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
>>>> #
>>>> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>>> #
>>>> -# GNU General Public License for more details. #
>>>> -# #
>>>> -# You should have received a copy of the GNU General Public License
>>>> #
>>>> -# along with this program. If not, see
>>>> <http://www.gnu.org/licenses/>. #
>>>> -# #
>>>> -###############################################################################
>>>> -
>>>> -###############################################################################
>>>> -# Definitions
>>>> -###############################################################################
>>>> -
>>>> -include Config
>>>> -
>>>> -VER = 4.14
>>>> -
>>>> -THISAPP = crda-$(VER)
>>>> -DL_FILE = $(THISAPP).tar.gz
>>>> -DL_FROM = $(URL_IPFIRE)
>>>> -DIR_APP = $(DIR_SRC)/$(THISAPP)
>>>> -
>>>> -TARGET = $(DIR_INFO)/$(THISAPP)
>>>> -
>>>> -###############################################################################
>>>> -# Top-level Rules
>>>> -###############################################################################
>>>> -
>>>> -objects = $(DL_FILE)
>>>> -
>>>> -$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>>>> -
>>>> -$(DL_FILE)_MD5 = cac7ba8de3e2e6aa46918e0c76df7d67
>>>> -
>>>> -install : $(TARGET)
>>>> -
>>>> -check : $(patsubst %,$(DIR_CHK)/%,$(objects))
>>>> -
>>>> -download :$(patsubst %,$(DIR_DL)/%,$(objects))
>>>> -
>>>> -md5 : $(subst %,%_MD5,$(objects))
>>>> -
>>>> -###############################################################################
>>>> -# Downloading, checking, md5sum
>>>> -###############################################################################
>>>> -
>>>> -$(patsubst %,$(DIR_CHK)/%,$(objects)) :
>>>> - @$(CHECK)
>>>> -
>>>> -$(patsubst %,$(DIR_DL)/%,$(objects)) :
>>>> - @$(LOAD)
>>>> -
>>>> -$(subst %,%_MD5,$(objects)) :
>>>> - @$(MD5)
>>>> -
>>>> -###############################################################################
>>>> -# Installation Details
>>>> -###############################################################################
>>>> -
>>>> -$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>>>> - @$(PREBUILD)
>>>> - @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf
>>>> $(DIR_DL)/$(DL_FILE)
>>>> - cd $(DIR_APP) && sed -e "s/-Werror//g" -i Makefile
>>>> - cd $(DIR_APP) && make $(MAKETUNING)
>>>> - cd $(DIR_APP) && make install
>>>> - @rm -rf $(DIR_APP)
>>>> - @$(POSTBUILD)
--
Sent from my laptop
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/6] crda: removal from kernel 4.15 and onwards.
2021-07-10 11:17 ` Adolf Belka
@ 2021-07-11 11:29 ` Adolf Belka
2021-07-11 12:51 ` Michael Tremer
0 siblings, 1 reply; 15+ messages in thread
From: Adolf Belka @ 2021-07-11 11:29 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 7937 bytes --]
Hi All,
On 10/07/2021 13:17, Adolf Belka wrote:
> Hi Arne,
>
> On 10/07/2021 09:25, Arne Fitzenreiter wrote:
>> It's not hostapd itself. It's the cgi that use regdump to generate some lists.
> Thanks for the clarification.
>> There must be a way to get this list from wireless-regdb. Or we can generate and ship it.
> I will have a look at this then and see if I can figure something out.
> If I am unable to then someone else may need to have a go but I will try to start with.
>
So my first thought was to build only regdbdump from the crda source tarball. From the makefile it looked like you could run make regdbdump. When I tried that I had an error but also it became clear it needed to have the python2 M2crypto in place to do it, which we obviously don't want to do.
A separate makefile could be made just to build regdbdump using a different crypto program that is in IPFire but all of that is way beyond my capabilities.
A different option is that we could copy the db.txt from the wireless-regdb source tarball to a location and then use that as the database source file for wlanap.cgi. db.txt is the text based equivalent of what is in the regulatory.bin file. A downside of that would be that we would not have the protection of the key signed file but I am not sure if that would be a problem here or not. We could always include a sha256 hash sum and use that to check that there has been no corruption of the file before loading it into @countrylist_cmd in wlanap.cgi
What are the thoughts on my options above or on any additional options that I have not thought of.
Regards,
Adolf.
> Regards,
> Adolf.
>>
>> Arne
>>
>> Am 2021-07-09 12:20, schrieb Adolf Belka:
>>> Hi Arne,
>>>
>>> On 09/07/2021 08:26, Arne Fitzenreiter wrote:
>>>> Removing regdump from crda package will break the hostapd webif because this is used to
>>>> generate the countrylist from wireless-regdb.
>>> I thought things had gone too smoothly. Oh well.
>>>
>>> I have searched in the hostapd mail list for crda in the subject.
>>> Nothing found all the way back to mid 2020 when there was a two year
>>> break in any mails listed.
>>>
>>> I can't find any way to search the body of the mails for any mention
>>> of crda and doing a google search for "hostapd crda" didn't flag
>>> anything useful up.
>>>
>>> So I think I need to mail the hostapd list to see what their plans are
>>> to not use crda (with its python2 dependency) in hostapd.
>>>
>>> Does anyone have any other thoughts on how to deal with this?
>>>
>>> Regards,
>>>
>>> Adolf.
>>>>
>>>> Arne
>>>>
>>>> Am 2021-06-28 21:13, schrieb Adolf Belka:
>>>>> - From kernel 4.15 and onwards the function of what crda does is built
>>>>> into the kernel.
>>>>> - Tested the removal of crda with kernel 4.14.232 and kernel 5.10.45
>>>>> Country code set by "iw reg set NL" was recognised with kernel
>>>>> 5.10.45 and set at
>>>>> the global value of 00 with kernel 4.14.232 confirming the kernel
>>>>> built in option is
>>>>> working without the prescence of crda
>>>>>
>>>>> Tested-by: Adolf Belka <adolf.belka(a)ipfire.org>
>>>>> Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
>>>>> ---
>>>>> config/rootfiles/common/crda | 14 -------
>>>>> lfs/crda | 78 ------------------------------------
>>>>> 2 files changed, 92 deletions(-)
>>>>> delete mode 100644 config/rootfiles/common/crda
>>>>> delete mode 100644 lfs/crda
>>>>>
>>>>> diff --git a/config/rootfiles/common/crda b/config/rootfiles/common/crda
>>>>> deleted file mode 100644
>>>>> index 5f93bc254..000000000
>>>>> --- a/config/rootfiles/common/crda
>>>>> +++ /dev/null
>>>>> @@ -1,14 +0,0 @@
>>>>> -lib/udev/rules.d/85-regulatory.rules
>>>>> -#root/.python-eggs
>>>>> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp
>>>>> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto/__m2crypto.so -sbin/crda
>>>>> -sbin/regdbdump
>>>>> -#usr/include/reglib
>>>>> -#usr/include/reglib/nl80211.h
>>>>> -#usr/include/reglib/regdb.h
>>>>> -#usr/include/reglib/reglib.h
>>>>> -usr/lib/libreg.so
>>>>> -#usr/share/man/man8/crda.8.gz
>>>>> -#usr/share/man/man8/regdbdump.8.gz
>>>>> diff --git a/lfs/crda b/lfs/crda
>>>>> deleted file mode 100644
>>>>> index bd812942e..000000000
>>>>> --- a/lfs/crda
>>>>> +++ /dev/null
>>>>> @@ -1,78 +0,0 @@
>>>>> -############################################################################### -# #
>>>>> -# IPFire.org - A linux based firewall #
>>>>> -# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> #
>>>>> -# #
>>>>> -# This program is free software: you can redistribute it and/or modify #
>>>>> -# it under the terms of the GNU General Public License as published by #
>>>>> -# the Free Software Foundation, either version 3 of the License, or #
>>>>> -# (at your option) any later version. #
>>>>> -# #
>>>>> -# This program is distributed in the hope that it will be useful, #
>>>>> -# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>>> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>>> -# GNU General Public License for more details. #
>>>>> -# #
>>>>> -# You should have received a copy of the GNU General Public License #
>>>>> -# along with this program. If not, see <http://www.gnu.org/licenses/>. #
>>>>> -# #
>>>>> -############################################################################### -
>>>>> -############################################################################### -# Definitions
>>>>> -############################################################################### -
>>>>> -include Config
>>>>> -
>>>>> -VER = 4.14
>>>>> -
>>>>> -THISAPP = crda-$(VER)
>>>>> -DL_FILE = $(THISAPP).tar.gz
>>>>> -DL_FROM = $(URL_IPFIRE)
>>>>> -DIR_APP = $(DIR_SRC)/$(THISAPP)
>>>>> -
>>>>> -TARGET = $(DIR_INFO)/$(THISAPP)
>>>>> -
>>>>> -############################################################################### -# Top-level Rules
>>>>> -############################################################################### -
>>>>> -objects = $(DL_FILE)
>>>>> -
>>>>> -$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>>>>> -
>>>>> -$(DL_FILE)_MD5 = cac7ba8de3e2e6aa46918e0c76df7d67
>>>>> -
>>>>> -install : $(TARGET)
>>>>> -
>>>>> -check : $(patsubst %,$(DIR_CHK)/%,$(objects))
>>>>> -
>>>>> -download :$(patsubst %,$(DIR_DL)/%,$(objects))
>>>>> -
>>>>> -md5 : $(subst %,%_MD5,$(objects))
>>>>> -
>>>>> -############################################################################### -# Downloading, checking, md5sum
>>>>> -############################################################################### -
>>>>> -$(patsubst %,$(DIR_CHK)/%,$(objects)) :
>>>>> - @$(CHECK)
>>>>> -
>>>>> -$(patsubst %,$(DIR_DL)/%,$(objects)) :
>>>>> - @$(LOAD)
>>>>> -
>>>>> -$(subst %,%_MD5,$(objects)) :
>>>>> - @$(MD5)
>>>>> -
>>>>> -############################################################################### -# Installation Details
>>>>> -############################################################################### -
>>>>> -$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>>>>> - @$(PREBUILD)
>>>>> - @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
>>>>> - cd $(DIR_APP) && sed -e "s/-Werror//g" -i Makefile
>>>>> - cd $(DIR_APP) && make $(MAKETUNING)
>>>>> - cd $(DIR_APP) && make install
>>>>> - @rm -rf $(DIR_APP)
>>>>> - @$(POSTBUILD)
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/6] crda: removal from kernel 4.15 and onwards.
2021-07-11 11:29 ` Adolf Belka
@ 2021-07-11 12:51 ` Michael Tremer
2021-07-16 12:28 ` Adolf Belka
0 siblings, 1 reply; 15+ messages in thread
From: Michael Tremer @ 2021-07-11 12:51 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 8228 bytes --]
Hello,
> On 11 Jul 2021, at 12:29, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>
> Hi All,
>
> On 10/07/2021 13:17, Adolf Belka wrote:
>> Hi Arne,
>>
>> On 10/07/2021 09:25, Arne Fitzenreiter wrote:
>>> It's not hostapd itself. It's the cgi that use regdump to generate some lists.
>> Thanks for the clarification.
>>> There must be a way to get this list from wireless-regdb. Or we can generate and ship it.
>> I will have a look at this then and see if I can figure something out.
>> If I am unable to then someone else may need to have a go but I will try to start with.
>>
> So my first thought was to build only regdbdump from the crda source tarball. From the makefile it looked like you could run make regdbdump. When I tried that I had an error but also it became clear it needed to have the python2 M2crypto in place to do it, which we obviously don't want to do.
>
> A separate makefile could be made just to build regdbdump using a different crypto program that is in IPFire but all of that is way beyond my capabilities.
>
> A different option is that we could copy the db.txt from the wireless-regdb source tarball to a location and then use that as the database source file for wlanap.cgi. db.txt is the text based equivalent of what is in the regulatory.bin file. A downside of that would be that we would not have the protection of the key signed file but I am not sure if that would be a problem here or not. We could always include a sha256 hash sum and use that to check that there has been no corruption of the file before loading it into @countrylist_cmd in wlanap.cgi
This sounds like the better solution. A text file is fine because we only need a list of countries that are part of the wireless reg database.
What does Arne think?
-Michael
>
> What are the thoughts on my options above or on any additional options that I have not thought of.
>
> Regards,
>
> Adolf.
>
>> Regards,
>> Adolf.
>>>
>>> Arne
>>>
>>> Am 2021-07-09 12:20, schrieb Adolf Belka:
>>>> Hi Arne,
>>>>
>>>> On 09/07/2021 08:26, Arne Fitzenreiter wrote:
>>>>> Removing regdump from crda package will break the hostapd webif because this is used to
>>>>> generate the countrylist from wireless-regdb.
>>>> I thought things had gone too smoothly. Oh well.
>>>>
>>>> I have searched in the hostapd mail list for crda in the subject.
>>>> Nothing found all the way back to mid 2020 when there was a two year
>>>> break in any mails listed.
>>>>
>>>> I can't find any way to search the body of the mails for any mention
>>>> of crda and doing a google search for "hostapd crda" didn't flag
>>>> anything useful up.
>>>>
>>>> So I think I need to mail the hostapd list to see what their plans are
>>>> to not use crda (with its python2 dependency) in hostapd.
>>>>
>>>> Does anyone have any other thoughts on how to deal with this?
>>>>
>>>> Regards,
>>>>
>>>> Adolf.
>>>>>
>>>>> Arne
>>>>>
>>>>> Am 2021-06-28 21:13, schrieb Adolf Belka:
>>>>>> - From kernel 4.15 and onwards the function of what crda does is built
>>>>>> into the kernel.
>>>>>> - Tested the removal of crda with kernel 4.14.232 and kernel 5.10.45
>>>>>> Country code set by "iw reg set NL" was recognised with kernel
>>>>>> 5.10.45 and set at
>>>>>> the global value of 00 with kernel 4.14.232 confirming the kernel
>>>>>> built in option is
>>>>>> working without the prescence of crda
>>>>>>
>>>>>> Tested-by: Adolf Belka <adolf.belka(a)ipfire.org>
>>>>>> Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
>>>>>> ---
>>>>>> config/rootfiles/common/crda | 14 -------
>>>>>> lfs/crda | 78 ------------------------------------
>>>>>> 2 files changed, 92 deletions(-)
>>>>>> delete mode 100644 config/rootfiles/common/crda
>>>>>> delete mode 100644 lfs/crda
>>>>>>
>>>>>> diff --git a/config/rootfiles/common/crda b/config/rootfiles/common/crda
>>>>>> deleted file mode 100644
>>>>>> index 5f93bc254..000000000
>>>>>> --- a/config/rootfiles/common/crda
>>>>>> +++ /dev/null
>>>>>> @@ -1,14 +0,0 @@
>>>>>> -lib/udev/rules.d/85-regulatory.rules
>>>>>> -#root/.python-eggs
>>>>>> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp
>>>>>> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto/__m2crypto.so -sbin/crda
>>>>>> -sbin/regdbdump
>>>>>> -#usr/include/reglib
>>>>>> -#usr/include/reglib/nl80211.h
>>>>>> -#usr/include/reglib/regdb.h
>>>>>> -#usr/include/reglib/reglib.h
>>>>>> -usr/lib/libreg.so
>>>>>> -#usr/share/man/man8/crda.8.gz
>>>>>> -#usr/share/man/man8/regdbdump.8.gz
>>>>>> diff --git a/lfs/crda b/lfs/crda
>>>>>> deleted file mode 100644
>>>>>> index bd812942e..000000000
>>>>>> --- a/lfs/crda
>>>>>> +++ /dev/null
>>>>>> @@ -1,78 +0,0 @@
>>>>>> -############################################################################### -# #
>>>>>> -# IPFire.org - A linux based firewall #
>>>>>> -# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> #
>>>>>> -# #
>>>>>> -# This program is free software: you can redistribute it and/or modify #
>>>>>> -# it under the terms of the GNU General Public License as published by #
>>>>>> -# the Free Software Foundation, either version 3 of the License, or #
>>>>>> -# (at your option) any later version. #
>>>>>> -# #
>>>>>> -# This program is distributed in the hope that it will be useful, #
>>>>>> -# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>>>> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>>>> -# GNU General Public License for more details. #
>>>>>> -# #
>>>>>> -# You should have received a copy of the GNU General Public License #
>>>>>> -# along with this program. If not, see <http://www.gnu.org/licenses/>. #
>>>>>> -# #
>>>>>> -############################################################################### -
>>>>>> -############################################################################### -# Definitions
>>>>>> -############################################################################### -
>>>>>> -include Config
>>>>>> -
>>>>>> -VER = 4.14
>>>>>> -
>>>>>> -THISAPP = crda-$(VER)
>>>>>> -DL_FILE = $(THISAPP).tar.gz
>>>>>> -DL_FROM = $(URL_IPFIRE)
>>>>>> -DIR_APP = $(DIR_SRC)/$(THISAPP)
>>>>>> -
>>>>>> -TARGET = $(DIR_INFO)/$(THISAPP)
>>>>>> -
>>>>>> -############################################################################### -# Top-level Rules
>>>>>> -############################################################################### -
>>>>>> -objects = $(DL_FILE)
>>>>>> -
>>>>>> -$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>>>>>> -
>>>>>> -$(DL_FILE)_MD5 = cac7ba8de3e2e6aa46918e0c76df7d67
>>>>>> -
>>>>>> -install : $(TARGET)
>>>>>> -
>>>>>> -check : $(patsubst %,$(DIR_CHK)/%,$(objects))
>>>>>> -
>>>>>> -download :$(patsubst %,$(DIR_DL)/%,$(objects))
>>>>>> -
>>>>>> -md5 : $(subst %,%_MD5,$(objects))
>>>>>> -
>>>>>> -############################################################################### -# Downloading, checking, md5sum
>>>>>> -############################################################################### -
>>>>>> -$(patsubst %,$(DIR_CHK)/%,$(objects)) :
>>>>>> - @$(CHECK)
>>>>>> -
>>>>>> -$(patsubst %,$(DIR_DL)/%,$(objects)) :
>>>>>> - @$(LOAD)
>>>>>> -
>>>>>> -$(subst %,%_MD5,$(objects)) :
>>>>>> - @$(MD5)
>>>>>> -
>>>>>> -############################################################################### -# Installation Details
>>>>>> -############################################################################### -
>>>>>> -$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>>>>>> - @$(PREBUILD)
>>>>>> - @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
>>>>>> - cd $(DIR_APP) && sed -e "s/-Werror//g" -i Makefile
>>>>>> - cd $(DIR_APP) && make $(MAKETUNING)
>>>>>> - cd $(DIR_APP) && make install
>>>>>> - @rm -rf $(DIR_APP)
>>>>>> - @$(POSTBUILD)
>>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/6] crda: removal from kernel 4.15 and onwards.
2021-07-11 12:51 ` Michael Tremer
@ 2021-07-16 12:28 ` Adolf Belka
2021-07-28 17:44 ` Adolf Belka
0 siblings, 1 reply; 15+ messages in thread
From: Adolf Belka @ 2021-07-16 12:28 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 8662 bytes --]
Hi Arne,
On 11/07/2021 14:51, Michael Tremer wrote:
> Hello,
>
>> On 11 Jul 2021, at 12:29, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>>
>> Hi All,
>>
>> On 10/07/2021 13:17, Adolf Belka wrote:
>>> Hi Arne,
>>>
>>> On 10/07/2021 09:25, Arne Fitzenreiter wrote:
>>>> It's not hostapd itself. It's the cgi that use regdump to generate some lists.
>>> Thanks for the clarification.
>>>> There must be a way to get this list from wireless-regdb. Or we can generate and ship it.
>>> I will have a look at this then and see if I can figure something out.
>>> If I am unable to then someone else may need to have a go but I will try to start with.
>>>
>> So my first thought was to build only regdbdump from the crda source tarball. From the makefile it looked like you could run make regdbdump. When I tried that I had an error but also it became clear it needed to have the python2 M2crypto in place to do it, which we obviously don't want to do.
>>
>> A separate makefile could be made just to build regdbdump using a different crypto program that is in IPFire but all of that is way beyond my capabilities.
>>
>> A different option is that we could copy the db.txt from the wireless-regdb source tarball to a location and then use that as the database source file for wlanap.cgi. db.txt is the text based equivalent of what is in the regulatory.bin file. A downside of that would be that we would not have the protection of the key signed file but I am not sure if that would be a problem here or not. We could always include a sha256 hash sum and use that to check that there has been no corruption of the file before loading it into @countrylist_cmd in wlanap.cgi
>
> This sounds like the better solution. A text file is fine because we only need a list of countries that are part of the wireless reg database.
>
> What does Arne think?
If you are okay with this approach of creating a text file I will go ahead and redo the previous patch set to include a text file generation and modification of wlanap.cgi to use it.
Regards,
Adolf.
>
> -Michael
>
>>
>> What are the thoughts on my options above or on any additional options that I have not thought of.
>>
>> Regards,
>>
>> Adolf.
>>
>>> Regards,
>>> Adolf.
>>>>
>>>> Arne
>>>>
>>>> Am 2021-07-09 12:20, schrieb Adolf Belka:
>>>>> Hi Arne,
>>>>>
>>>>> On 09/07/2021 08:26, Arne Fitzenreiter wrote:
>>>>>> Removing regdump from crda package will break the hostapd webif because this is used to
>>>>>> generate the countrylist from wireless-regdb.
>>>>> I thought things had gone too smoothly. Oh well.
>>>>>
>>>>> I have searched in the hostapd mail list for crda in the subject.
>>>>> Nothing found all the way back to mid 2020 when there was a two year
>>>>> break in any mails listed.
>>>>>
>>>>> I can't find any way to search the body of the mails for any mention
>>>>> of crda and doing a google search for "hostapd crda" didn't flag
>>>>> anything useful up.
>>>>>
>>>>> So I think I need to mail the hostapd list to see what their plans are
>>>>> to not use crda (with its python2 dependency) in hostapd.
>>>>>
>>>>> Does anyone have any other thoughts on how to deal with this?
>>>>>
>>>>> Regards,
>>>>>
>>>>> Adolf.
>>>>>>
>>>>>> Arne
>>>>>>
>>>>>> Am 2021-06-28 21:13, schrieb Adolf Belka:
>>>>>>> - From kernel 4.15 and onwards the function of what crda does is built
>>>>>>> into the kernel.
>>>>>>> - Tested the removal of crda with kernel 4.14.232 and kernel 5.10.45
>>>>>>> Country code set by "iw reg set NL" was recognised with kernel
>>>>>>> 5.10.45 and set at
>>>>>>> the global value of 00 with kernel 4.14.232 confirming the kernel
>>>>>>> built in option is
>>>>>>> working without the prescence of crda
>>>>>>>
>>>>>>> Tested-by: Adolf Belka <adolf.belka(a)ipfire.org>
>>>>>>> Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
>>>>>>> ---
>>>>>>> config/rootfiles/common/crda | 14 -------
>>>>>>> lfs/crda | 78 ------------------------------------
>>>>>>> 2 files changed, 92 deletions(-)
>>>>>>> delete mode 100644 config/rootfiles/common/crda
>>>>>>> delete mode 100644 lfs/crda
>>>>>>>
>>>>>>> diff --git a/config/rootfiles/common/crda b/config/rootfiles/common/crda
>>>>>>> deleted file mode 100644
>>>>>>> index 5f93bc254..000000000
>>>>>>> --- a/config/rootfiles/common/crda
>>>>>>> +++ /dev/null
>>>>>>> @@ -1,14 +0,0 @@
>>>>>>> -lib/udev/rules.d/85-regulatory.rules
>>>>>>> -#root/.python-eggs
>>>>>>> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp
>>>>>>> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto/__m2crypto.so -sbin/crda
>>>>>>> -sbin/regdbdump
>>>>>>> -#usr/include/reglib
>>>>>>> -#usr/include/reglib/nl80211.h
>>>>>>> -#usr/include/reglib/regdb.h
>>>>>>> -#usr/include/reglib/reglib.h
>>>>>>> -usr/lib/libreg.so
>>>>>>> -#usr/share/man/man8/crda.8.gz
>>>>>>> -#usr/share/man/man8/regdbdump.8.gz
>>>>>>> diff --git a/lfs/crda b/lfs/crda
>>>>>>> deleted file mode 100644
>>>>>>> index bd812942e..000000000
>>>>>>> --- a/lfs/crda
>>>>>>> +++ /dev/null
>>>>>>> @@ -1,78 +0,0 @@
>>>>>>> -############################################################################### -# #
>>>>>>> -# IPFire.org - A linux based firewall #
>>>>>>> -# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> #
>>>>>>> -# #
>>>>>>> -# This program is free software: you can redistribute it and/or modify #
>>>>>>> -# it under the terms of the GNU General Public License as published by #
>>>>>>> -# the Free Software Foundation, either version 3 of the License, or #
>>>>>>> -# (at your option) any later version. #
>>>>>>> -# #
>>>>>>> -# This program is distributed in the hope that it will be useful, #
>>>>>>> -# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>>>>> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>>>>> -# GNU General Public License for more details. #
>>>>>>> -# #
>>>>>>> -# You should have received a copy of the GNU General Public License #
>>>>>>> -# along with this program. If not, see <http://www.gnu.org/licenses/>. #
>>>>>>> -# #
>>>>>>> -############################################################################### -
>>>>>>> -############################################################################### -# Definitions
>>>>>>> -############################################################################### -
>>>>>>> -include Config
>>>>>>> -
>>>>>>> -VER = 4.14
>>>>>>> -
>>>>>>> -THISAPP = crda-$(VER)
>>>>>>> -DL_FILE = $(THISAPP).tar.gz
>>>>>>> -DL_FROM = $(URL_IPFIRE)
>>>>>>> -DIR_APP = $(DIR_SRC)/$(THISAPP)
>>>>>>> -
>>>>>>> -TARGET = $(DIR_INFO)/$(THISAPP)
>>>>>>> -
>>>>>>> -############################################################################### -# Top-level Rules
>>>>>>> -############################################################################### -
>>>>>>> -objects = $(DL_FILE)
>>>>>>> -
>>>>>>> -$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>>>>>>> -
>>>>>>> -$(DL_FILE)_MD5 = cac7ba8de3e2e6aa46918e0c76df7d67
>>>>>>> -
>>>>>>> -install : $(TARGET)
>>>>>>> -
>>>>>>> -check : $(patsubst %,$(DIR_CHK)/%,$(objects))
>>>>>>> -
>>>>>>> -download :$(patsubst %,$(DIR_DL)/%,$(objects))
>>>>>>> -
>>>>>>> -md5 : $(subst %,%_MD5,$(objects))
>>>>>>> -
>>>>>>> -############################################################################### -# Downloading, checking, md5sum
>>>>>>> -############################################################################### -
>>>>>>> -$(patsubst %,$(DIR_CHK)/%,$(objects)) :
>>>>>>> - @$(CHECK)
>>>>>>> -
>>>>>>> -$(patsubst %,$(DIR_DL)/%,$(objects)) :
>>>>>>> - @$(LOAD)
>>>>>>> -
>>>>>>> -$(subst %,%_MD5,$(objects)) :
>>>>>>> - @$(MD5)
>>>>>>> -
>>>>>>> -############################################################################### -# Installation Details
>>>>>>> -############################################################################### -
>>>>>>> -$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>>>>>>> - @$(PREBUILD)
>>>>>>> - @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
>>>>>>> - cd $(DIR_APP) && sed -e "s/-Werror//g" -i Makefile
>>>>>>> - cd $(DIR_APP) && make $(MAKETUNING)
>>>>>>> - cd $(DIR_APP) && make install
>>>>>>> - @rm -rf $(DIR_APP)
>>>>>>> - @$(POSTBUILD)
>>>
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/6] crda: removal from kernel 4.15 and onwards.
2021-07-16 12:28 ` Adolf Belka
@ 2021-07-28 17:44 ` Adolf Belka
0 siblings, 0 replies; 15+ messages in thread
From: Adolf Belka @ 2021-07-28 17:44 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 9716 bytes --]
Hi Everyone,
I have submitted a v2 version of the crda removal patch series.
This now includes placing db.txt from the wireless-regdb source code into /lib/firmware/ and then using this file to provide the country list to variable @countrylist_cmd in wlanap.cgi which was using regdbdump from crda to access the list from regulatory.bin
I don't have any IPFire system with a wireless card built in and I can't mimic that virtually in my VirtualBox vm testbed so someone who has a test system with wireless will need to test this to confirm that the wlanap.cgi change functions as expected.
Regards,
Adolf.
On 16/07/2021 14:28, Adolf Belka wrote:
> Hi Arne,
>
> On 11/07/2021 14:51, Michael Tremer wrote:
>> Hello,
>>
>>> On 11 Jul 2021, at 12:29, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>>>
>>> Hi All,
>>>
>>> On 10/07/2021 13:17, Adolf Belka wrote:
>>>> Hi Arne,
>>>>
>>>> On 10/07/2021 09:25, Arne Fitzenreiter wrote:
>>>>> It's not hostapd itself. It's the cgi that use regdump to generate some lists.
>>>> Thanks for the clarification.
>>>>> There must be a way to get this list from wireless-regdb. Or we can generate and ship it.
>>>> I will have a look at this then and see if I can figure something out.
>>>> If I am unable to then someone else may need to have a go but I will try to start with.
>>>>
>>> So my first thought was to build only regdbdump from the crda source tarball. From the makefile it looked like you could run make regdbdump. When I tried that I had an error but also it became clear it needed to have the python2 M2crypto in place to do it, which we obviously don't want to do.
>>>
>>> A separate makefile could be made just to build regdbdump using a different crypto program that is in IPFire but all of that is way beyond my capabilities.
>>>
>>> A different option is that we could copy the db.txt from the wireless-regdb source tarball to a location and then use that as the database source file for wlanap.cgi. db.txt is the text based equivalent of what is in the regulatory.bin file. A downside of that would be that we would not have the protection of the key signed file but I am not sure if that would be a problem here or not. We could always include a sha256 hash sum and use that to check that there has been no corruption of the file before loading it into @countrylist_cmd in wlanap.cgi
>>
>> This sounds like the better solution. A text file is fine because we only need a list of countries that are part of the wireless reg database.
>>
>> What does Arne think?
> If you are okay with this approach of creating a text file I will go ahead and redo the previous patch set to include a text file generation and modification of wlanap.cgi to use it.
>
> Regards,
> Adolf.
>>
>> -Michael
>>
>>>
>>> What are the thoughts on my options above or on any additional options that I have not thought of.
>>>
>>> Regards,
>>>
>>> Adolf.
>>>
>>>> Regards,
>>>> Adolf.
>>>>>
>>>>> Arne
>>>>>
>>>>> Am 2021-07-09 12:20, schrieb Adolf Belka:
>>>>>> Hi Arne,
>>>>>>
>>>>>> On 09/07/2021 08:26, Arne Fitzenreiter wrote:
>>>>>>> Removing regdump from crda package will break the hostapd webif because this is used to
>>>>>>> generate the countrylist from wireless-regdb.
>>>>>> I thought things had gone too smoothly. Oh well.
>>>>>>
>>>>>> I have searched in the hostapd mail list for crda in the subject.
>>>>>> Nothing found all the way back to mid 2020 when there was a two year
>>>>>> break in any mails listed.
>>>>>>
>>>>>> I can't find any way to search the body of the mails for any mention
>>>>>> of crda and doing a google search for "hostapd crda" didn't flag
>>>>>> anything useful up.
>>>>>>
>>>>>> So I think I need to mail the hostapd list to see what their plans are
>>>>>> to not use crda (with its python2 dependency) in hostapd.
>>>>>>
>>>>>> Does anyone have any other thoughts on how to deal with this?
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>> Adolf.
>>>>>>>
>>>>>>> Arne
>>>>>>>
>>>>>>> Am 2021-06-28 21:13, schrieb Adolf Belka:
>>>>>>>> - From kernel 4.15 and onwards the function of what crda does is built
>>>>>>>> into the kernel.
>>>>>>>> - Tested the removal of crda with kernel 4.14.232 and kernel 5.10.45
>>>>>>>> Country code set by "iw reg set NL" was recognised with kernel
>>>>>>>> 5.10.45 and set at
>>>>>>>> the global value of 00 with kernel 4.14.232 confirming the kernel
>>>>>>>> built in option is
>>>>>>>> working without the prescence of crda
>>>>>>>>
>>>>>>>> Tested-by: Adolf Belka <adolf.belka(a)ipfire.org>
>>>>>>>> Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
>>>>>>>> ---
>>>>>>>> config/rootfiles/common/crda | 14 -------
>>>>>>>> lfs/crda | 78 ------------------------------------
>>>>>>>> 2 files changed, 92 deletions(-)
>>>>>>>> delete mode 100644 config/rootfiles/common/crda
>>>>>>>> delete mode 100644 lfs/crda
>>>>>>>>
>>>>>>>> diff --git a/config/rootfiles/common/crda b/config/rootfiles/common/crda
>>>>>>>> deleted file mode 100644
>>>>>>>> index 5f93bc254..000000000
>>>>>>>> --- a/config/rootfiles/common/crda
>>>>>>>> +++ /dev/null
>>>>>>>> @@ -1,14 +0,0 @@
>>>>>>>> -lib/udev/rules.d/85-regulatory.rules
>>>>>>>> -#root/.python-eggs
>>>>>>>> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp
>>>>>>>> -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto -#root/.python-eggs/M2Crypto-0.21.1-py2.7-linux-xxxMACHINExxx.egg-tmp/M2Crypto/__m2crypto.so -sbin/crda
>>>>>>>> -sbin/regdbdump
>>>>>>>> -#usr/include/reglib
>>>>>>>> -#usr/include/reglib/nl80211.h
>>>>>>>> -#usr/include/reglib/regdb.h
>>>>>>>> -#usr/include/reglib/reglib.h
>>>>>>>> -usr/lib/libreg.so
>>>>>>>> -#usr/share/man/man8/crda.8.gz
>>>>>>>> -#usr/share/man/man8/regdbdump.8.gz
>>>>>>>> diff --git a/lfs/crda b/lfs/crda
>>>>>>>> deleted file mode 100644
>>>>>>>> index bd812942e..000000000
>>>>>>>> --- a/lfs/crda
>>>>>>>> +++ /dev/null
>>>>>>>> @@ -1,78 +0,0 @@
>>>>>>>> -############################################################################### -# #
>>>>>>>> -# IPFire.org - A linux based firewall #
>>>>>>>> -# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> #
>>>>>>>> -# #
>>>>>>>> -# This program is free software: you can redistribute it and/or modify #
>>>>>>>> -# it under the terms of the GNU General Public License as published by #
>>>>>>>> -# the Free Software Foundation, either version 3 of the License, or #
>>>>>>>> -# (at your option) any later version. #
>>>>>>>> -# #
>>>>>>>> -# This program is distributed in the hope that it will be useful, #
>>>>>>>> -# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>>>>>>> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>>>>>>> -# GNU General Public License for more details. #
>>>>>>>> -# #
>>>>>>>> -# You should have received a copy of the GNU General Public License #
>>>>>>>> -# along with this program. If not, see <http://www.gnu.org/licenses/>. #
>>>>>>>> -# #
>>>>>>>> -############################################################################### -
>>>>>>>> -############################################################################### -# Definitions
>>>>>>>> -############################################################################### -
>>>>>>>> -include Config
>>>>>>>> -
>>>>>>>> -VER = 4.14
>>>>>>>> -
>>>>>>>> -THISAPP = crda-$(VER)
>>>>>>>> -DL_FILE = $(THISAPP).tar.gz
>>>>>>>> -DL_FROM = $(URL_IPFIRE)
>>>>>>>> -DIR_APP = $(DIR_SRC)/$(THISAPP)
>>>>>>>> -
>>>>>>>> -TARGET = $(DIR_INFO)/$(THISAPP)
>>>>>>>> -
>>>>>>>> -############################################################################### -# Top-level Rules
>>>>>>>> -############################################################################### -
>>>>>>>> -objects = $(DL_FILE)
>>>>>>>> -
>>>>>>>> -$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>>>>>>>> -
>>>>>>>> -$(DL_FILE)_MD5 = cac7ba8de3e2e6aa46918e0c76df7d67
>>>>>>>> -
>>>>>>>> -install : $(TARGET)
>>>>>>>> -
>>>>>>>> -check : $(patsubst %,$(DIR_CHK)/%,$(objects))
>>>>>>>> -
>>>>>>>> -download :$(patsubst %,$(DIR_DL)/%,$(objects))
>>>>>>>> -
>>>>>>>> -md5 : $(subst %,%_MD5,$(objects))
>>>>>>>> -
>>>>>>>> -############################################################################### -# Downloading, checking, md5sum
>>>>>>>> -############################################################################### -
>>>>>>>> -$(patsubst %,$(DIR_CHK)/%,$(objects)) :
>>>>>>>> - @$(CHECK)
>>>>>>>> -
>>>>>>>> -$(patsubst %,$(DIR_DL)/%,$(objects)) :
>>>>>>>> - @$(LOAD)
>>>>>>>> -
>>>>>>>> -$(subst %,%_MD5,$(objects)) :
>>>>>>>> - @$(MD5)
>>>>>>>> -
>>>>>>>> -############################################################################### -# Installation Details
>>>>>>>> -############################################################################### -
>>>>>>>> -$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>>>>>>>> - @$(PREBUILD)
>>>>>>>> - @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
>>>>>>>> - cd $(DIR_APP) && sed -e "s/-Werror//g" -i Makefile
>>>>>>>> - cd $(DIR_APP) && make $(MAKETUNING)
>>>>>>>> - cd $(DIR_APP) && make install
>>>>>>>> - @rm -rf $(DIR_APP)
>>>>>>>> - @$(POSTBUILD)
>>>>
>>
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2021-07-28 17:44 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-28 19:13 [PATCH 1/6] make.sh: Remove crda and remaining python2 modules Adolf Belka
2021-06-28 19:13 ` [PATCH 2/6] crda: removal from kernel 4.15 and onwards Adolf Belka
2021-07-09 6:26 ` Arne Fitzenreiter
2021-07-09 10:20 ` Adolf Belka
2021-07-10 7:25 ` Arne Fitzenreiter
2021-07-10 11:17 ` Adolf Belka
2021-07-11 11:29 ` Adolf Belka
2021-07-11 12:51 ` Michael Tremer
2021-07-16 12:28 ` Adolf Belka
2021-07-28 17:44 ` Adolf Belka
2021-06-28 19:13 ` [PATCH 3/6] python-m2crypto: removal of python2 module Adolf Belka
2021-06-28 19:13 ` [PATCH 4/6] python-typing: Removal of this " Adolf Belka
2021-06-28 19:13 ` [PATCH 5/6] python-setuptools: " Adolf Belka
2021-06-28 19:14 ` [PATCH 6/6] ipaddr: " Adolf Belka
2021-07-05 16:39 ` [PATCH 1/6] make.sh: Remove crda and remaining python2 modules Michael Tremer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox