From: Adolf Belka <adolf.belka@ipfire.org>
To: development@lists.ipfire.org
Subject: [PATCH] curl: Update to version 7.88.1
Date: Thu, 02 Mar 2023 11:14:07 +0100 [thread overview]
Message-ID: <20230302101419.3443689-2-adolf.belka@ipfire.org> (raw)
In-Reply-To: <20230302101419.3443689-1-adolf.belka@ipfire.org>
[-- Attachment #1: Type: text/plain, Size: 15642 bytes --]
- Update from version 7.87.0 to 7.88.1
- Update of rootfile not required
- Patch removed as fix now built into source tarball
- Changelog
Fixed in 7.88.1 - February 20 2023
Bugfixes:
build-openssl.bat: keep OpenSSL 3 engine binaries
cmake: fix Windows check for CryptAcquireContext
connnect: fix timeout handling to use full duration
curl: make --silent work stand-alone
curl_setup: Suppress OpenSSL 3 deprecation warnings
CURLOPT_WS_OPTIONS.3: fix the availability version
GHA: update rustls dependency to 0.9.2
http2: buffer/pausedata and output flush fix.
http2: set drain on stream end
http: include stdint.h more readily
krb5: silence cast-align warning
lib1560: add IPv6 canonicalization tests
os400: correct Curl_os400_sendto()
remote-header-name.d: mention that filename* is not supported
runtests: fix "uninitialized value $port"
setopt: allow HTTP3 when HTTP2 is not defined
socketpair: allow EWOULDBLOCK when reading the pair check bytes
socks: allow using DoH to resolve host names
tests-httpd: add proxy tests
tests: make sure gnuserv-tls has SRP support before using it
tests: make the telnet server shut down a socket gracefully
tool_getparam: make --get a true boolean
tool_operate: allow debug builds to set buffersize
urlapi: do the port number extraction without using sscanf()
urldata: remove `now` from struct SingleRequest - not needed
Fixed in 7.88.0 - February 15 2023
Changes:
curl.h: add CURL_HTTP_VERSION_3ONLY
share: add sharing of HSTS cache among handles
src: add --http3-only
tool_operate: share HSTS between handles
urlapi: add CURLU_PUNYCODE
writeout: add %{certs} and %{num_certs}
Bugfixes:
cf-socket: fix build when not HAVE_GETPEERNAME
cf-socket: keep sockaddr local in the socket filters
cfilters:Curl_conn_get_select_socks: use the first non-connected filter
CI: add a workflow to automatically label pull requests
CI: add pytest GHA to CI test/tests-httpd on a HTTP/3 setup
CI: Retry failed downloads to reduce spurious failures
CI: update wolfssl / wolfssh to 5.5.4 / 1.4.12
cmake: bump requirement to 3.7
cmake: check for sendmsg
cmake: delete redundant macro definition `SECURITY_WIN32`
cmake: fix dev warning due to mismatched arg
cmake: fix the snprintf detection
cmake: remove deprecated symbols check
cmake: set SOVERSION also for macOS
cmake: use list APPEND syntax for CMAKE_REQUIRED_DEFINITIONS
cmdline-opts/Makefile: on error, do not leave a partial
CODEOWNERS: remove the peeps mentioned as CI owners
connect: fix access of pointer before NULL check
connect: fix build when not ENABLE_IPV6
connect: fix strategy testing for attempts, timeouts and happy-eyeball
connections: introduce http/3 happy eyeballs
content_encoding: do not reset stage counter for each header
CONTRIBUTE: More formally specify the commit description
cookies: fp is always not NULL
copyright.pl: cease doing year verifications
copyright: update all copyright lines and remove year ranges
curl.1: make help, version and manual sections "custom"
curl.h: allow up to 10M buffer size
curl.h: mark CURLSSLBACKEND_MESALINK as deprecated
curl/websockets.h: extend the websocket frame struct
curl: output warning at --verbose output for debug-enabled version
curl_free.3: fix return type of `curl_free`
curl_global_sslset.3: clarify the openssl situation
curl_log: for failf/infof and debug logging implementations
curl_setup: Disable by default recv-before-send in Windows
curl_version_info.3: fix typo
curl_ws_send.3: clarify how to send multi-frame messages
CURLOPT_HEADERDATA.3: warn DLL users must set write function
CURLOPT_READFUNCTION.3: the callback 'size' arg is always 1
CURLOPT_WRITEFUNCTION.3: fix memory leak in example
dict: URL decode the entire path always
docs/DEPRECATE.md: deprecate gskit
docs: add link to GitHub Discussions
docs: mention indirect effects of --insecure
docs: POSTFIELDSIZE must be set to -1 with read function
doh: ifdef IPv6 code
easyoptions: fix header printing in generation script
escape: hex decode with a lookup-table
escape: use table lookup when adding %-codes to output
examples: remove the curlgtk.c example
fopen: remove unnecessary assignment
ftpserver: lower the DATA connect timeout to speed up torture tests
GHA/macos.yml: bump to gcc-12
GHA/macos: use Xcode_14.0.1 for cmake builds
GHA: add job on Slackware 15.0
GHA: bump ngtcp2 workflow dependencies
GHA: enable websockets in the torture job
GHA: move the quiche job here from zuul
GHA: use designated ngtcp2 and its dependencies versions
haxproxy: send before TLS handhshake
header.d: add a header file example
hsts.d: explain hsts more
hsts: handle adding the same host name again
HTTP/[23]: continue upload when state.drain is set
http2: aggregate small SETTINGS/PRIO/WIN_UPDATE frames
http2: fix compiler warning due to uninitialized variable
http2: minor buffer and error path fixes
http2: when using printf %.*s, the length arg must be 'int'
HTTP3: mention what needs to be in place to remove EXPERIMENTAL label
http: add additional condition for including stdint.h
http: decode transfer encoding first
http: fix "part of conditional expression is always false"
http: remove the trace message "Mark bundle... multiuse"
http_aws_sigv4: remove typecasts from HMAC_SHA256 macro
http_proxy: do not assign data->req.p.http use local copy
INSTALL: document how to use multiple TLS backends
lib670: make test.h the first include
lib: connect/h2/h3 refactor
lib: fix typos
lib: fix typos in comments which repeat a word
libssh2: try sha2 algos for hostkey methods
libtest: add a sleep macro for Windows
Linux CI: update some dependecies to latest tag
Makefile.mk: fix wolfssl and mbedtls default paths
man pages: call the custom user pointer 'clientp' consistently
md4: fix build with GnuTLS + OpenSSL v1
misc: fix grammar and spelling
misc: fix spelling
misc: reduce struct and struct field sizes
msh3: add support for request payload
msh3: update to v0.5 Release
msh3: update to v0.6
multi: stop sending empty HTTP/3 UDP datagrams on Windows
multihandle: turn bool struct fields into bits
ngtcp2: add CURLOPT_SSL_CTX_FUNCTION support for openssl+wolfssl
ngtcp2: fix the build without 'sendmsg'
ngtcp2: replace removed define and stop using removed function
no-clobber.d: only use long form options in man page text
noproxy: support for space-separated names is deprecated
nss: implement data_pending method
openldap: fix missing sasl symbols at build in specific configs
openssl: adapt to boringssl's error code type
openssl: don't ignore CA paths when using Windows CA store (redux)
openssl: don't log raw record headers
openssl: make the BIO_METHOD a local variable in the connection filter
openssl: only use CA_BLOB if verifying peer
openssl: remove attached easy handles from SSL instances
openssl: store the CA after first send (ClientHello)
os400: fixes to make-lib.sh and initscript.sh
packages: remove Android, update README
release-notes.pl: check fixes/closes lines better
Revert "x509asn1: avoid freeing unallocated pointers"
runtest.pl: add expected fourth return value
runtests: tear down http2/http3 servers when https server is stopped
runtests: consider warnings fatal and error on them
runtests: fix detection of TLS backends
runtests: make 'mbedtls' a testable feature
rustls: improve error messages
scripts/delta: show percent of number of files changed since last tag
scripts: fix Appveyor job detection in cijobs.pl
scripts: set file mode +x on all perl and shell scripts
sectransp: fix for incomplete read/writes
SECURITY-PROCESS.md: document severity levels
setopt: Address undefined behaviour by checking for null
setopt: move the SHA256 opt within #ifdef libssh2
setopt: use >, not >=, when checking if uarg is larger than uint-max
smb: return error on upload without size
socketpair: allow localhost MITM sniffers
strdup: name it Curl_strdup
system.h: assume OS400 is always built with ILEC compiler
test1560: use a UTF8-using locale when run
test2304: remove stdout verification
tests-httpd: basic infra to run curl against an apache httpd
tests: add 3 new HTTP/2 test cases, plus https: support for nghttpx
tests: add tests for HTTP/2 and HTTP/3 to verify the header API
tests: avoid use of sha1 in certificates
tls: fixes for wolfssl + openssl combo builds
tool_getparam: fix hiding of command line secrets
tool_operate: fix `CURLOPT_SOCKS5_GSSAPI_NEC` type
tool_operate: fix error codes during DOS filename sanitize
tool_operate: fix error codes on bad URL & OOM
tool_operate: fix headerfile writing
tool_operate: repair --rate
transfer: break the read loop when RECV is cleared
typecheck: accept expressions for option/info parameters
url: fix part of conditional expression is always true
urlapi: avoid Curl_dyn_addf() for hex outputs
urlapi: fix part of conditional expression is always true: qlen
urlapi: skip path checks if path is just "/"
urlapi: skip the extra dedotdot alloc if no dot in path
urldata: cease storing TLS auth type
urldata: make 'ftp_create_missing_dirs' depend on FTP || SFTP
urldata: make set.http200aliases conditional on HTTP being present
urldata: move the cookefilelist to the 'set' struct
urldata: remove unused struct fields, made more conditional
vquic: stabilization and improvements
vtls: fix hostname handling in filters
vtls: manage current easy handle in nested cfilter calls
vtls: use ALPN HTTP/1.0 when HTTP/1.0 is used
winbuild: document that arm64 is supported
windows: always use curl's basename() implementation
wolfssl: remove deprecated post-quantum algorithms
workflows/linux.yml: merge 3 common packages
write-out.d: add 'since version' to %{header_json} documentation
write-out.d: clarify Windows % symbol escaping
ws: fix autoping handling
ws: fix multiframe send handling
ws: fix recv of larger frames
ws: remove bad assert
ws: unstick connect-only shutdown
ws: use %Ou for outputting curl_off_t with info()
x509asn1: fix compile errors and warnings
zuul: stop using this CI service
Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
---
lfs/curl | 7 ++--
...pressions_for_option_info_parameters.patch | 42 -------------------
2 files changed, 3 insertions(+), 46 deletions(-)
delete mode 100644 src/patches/curl-7.87.0_typecheck_accept_expressions_for_option_info_parameters.patch
diff --git a/lfs/curl b/lfs/curl
index b76c33410..feb4fa810 100644
--- a/lfs/curl
+++ b/lfs/curl
@@ -1,7 +1,7 @@
###############################################################################
# #
# IPFire.org - A linux based firewall #
-# Copyright (C) 2007-2022 IPFire Team <info(a)ipfire.org> #
+# Copyright (C) 2007-2023 IPFire Team <info(a)ipfire.org> #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
@@ -24,7 +24,7 @@
include Config
-VER = 7.87.0
+VER = 7.88.1
THISAPP = curl-$(VER)
DL_FILE = $(THISAPP).tar.xz
@@ -40,7 +40,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_BLAKE2 = b272ec928c5ef1728434630d8910f58834327a30570913df9d47921a2810d002bd88b81371005197db857d3a53386420c1e28b1e463e6241d46c1e50fbce0c13
+$(DL_FILE)_BLAKE2 = ed7e7aa29efb02fd89a53d5c8d0ec79b4d17612ea07d2a6b5a951f0ca651b4cf7264704344b1a0c2d82196f4cb5c08525e06b4cdd432bc3278ff23c7a6580839
install : $(TARGET)
@@ -71,7 +71,6 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
@$(PREBUILD)
@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar xf $(DIR_DL)/$(DL_FILE)
# Add upstream patche.
- cd $(DIR_APP) && patch -Np1 -i $(DIR_SRC)/src/patches/curl-7.87.0_typecheck_accept_expressions_for_option_info_parameters.patch
cd $(DIR_APP) && ./configure \
--prefix=/usr \
--disable-ipv6 \
diff --git a/src/patches/curl-7.87.0_typecheck_accept_expressions_for_option_info_parameters.patch b/src/patches/curl-7.87.0_typecheck_accept_expressions_for_option_info_parameters.patch
deleted file mode 100644
index 63b23e309..000000000
--- a/src/patches/curl-7.87.0_typecheck_accept_expressions_for_option_info_parameters.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From curl commit e2aed00
-
-As expressions can have side effects, evaluate only once.
-
-To enable deprecation reporting only once, get rid of the __typeof__
-use to define the local temporary variable and use the target type
-(CURLoption/CURLINFO). This also avoids multiple reports on type
-conflicts (if some) by the curlcheck_* macros.
-
-Note that CURLOPT_* and CURLINFO_* symbols may be deprecated, but not
-their values: a curl_easy_setopt call with an integer constant as option
-will never report a deprecation.
-
-Reported-by: Thomas Klausner
-Fixes #10148
-Closes #10149
-
-
---- curl-7.87.0/include/curl/typecheck-gcc.h.orig 2022-12-19 08:48:23.000000000 +0100
-+++ curl-7.87.0/include/curl/typecheck-gcc.h 2022-12-26 20:39:29.243819395 +0100
-@@ -42,9 +42,8 @@
- */
- #define curl_easy_setopt(handle, option, value) \
- __extension__({ \
-- CURL_IGNORE_DEPRECATION(__typeof__(option) _curl_opt = option;) \
-+ CURLoption _curl_opt = (option); \
- if(__builtin_constant_p(_curl_opt)) { \
-- (void) option; \
- CURL_IGNORE_DEPRECATION( \
- if(curlcheck_long_option(_curl_opt)) \
- if(!curlcheck_long(value)) \
-@@ -120,9 +119,8 @@
- /* wraps curl_easy_getinfo() with typechecking */
- #define curl_easy_getinfo(handle, info, arg) \
- __extension__({ \
-- CURL_IGNORE_DEPRECATION(__typeof__(info) _curl_info = info;) \
-+ CURLINFO _curl_info = (info); \
- if(__builtin_constant_p(_curl_info)) { \
-- (void) info; \
- CURL_IGNORE_DEPRECATION( \
- if(curlcheck_string_info(_curl_info)) \
- if(!curlcheck_arr((arg), char *)) \
--
2.39.2
next prev parent reply other threads:[~2023-03-02 10:14 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-02 10:14 [PATCH] apr: Update to version 1.7.2 Adolf Belka
2023-03-02 10:14 ` Adolf Belka [this message]
2023-03-02 10:14 ` [PATCH] e2fsprogs: Update to version 1.47.0 Adolf Belka
2023-03-02 10:14 ` [PATCH] ethtool: Update to version 6.2 Adolf Belka
2023-03-02 10:14 ` [PATCH] gnutls: Update to version 3.8.0 Adolf Belka
2023-03-02 10:14 ` [PATCH] harfbuzz: Update to version 7.0.1 Adolf Belka
2023-03-02 10:14 ` [PATCH] iproute2: Update to version 6.2.0 Adolf Belka
2023-03-02 10:14 ` [PATCH] liburcu: Update to version 0.14.0 Adolf Belka
2023-03-02 10:14 ` [PATCH] lmdb: Update to version 0.9.30 Adolf Belka
2023-03-02 10:14 ` [PATCH] make: Update to version 4.4.1 Adolf Belka
2023-03-02 10:14 ` [PATCH] pango: Update to version 1.50.13 Adolf Belka
2023-03-02 10:14 ` [PATCH] sudo: Update to version 1.9.13p2 Adolf Belka
2023-03-02 10:14 ` [PATCH] texinfo: Update to version 7.0.2 Adolf Belka
2023-03-02 10:14 ` [PATCH] zstd: Update to version 1.5.4 Adolf Belka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230302101419.3443689-2-adolf.belka@ipfire.org \
--to=adolf.belka@ipfire.org \
--cc=development@lists.ipfire.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox