* [PATCH] libnet: Update to version 1.3
@ 2024-08-09 10:53 Adolf Belka
0 siblings, 0 replies; only message in thread
From: Adolf Belka @ 2024-08-09 10:53 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 7495 bytes --]
- Update from version 1.1.6 to 1.3
- Update of rootfile
- sobump gives suricata and arping as dependencies so those packages also need to be
shipped.
- Changelog
1.3
### Changes
- License change of critical files from 4-clause BSD to 3-clause and
2-clause BSD. This fixes issue #85: "GPL license compatibility".
- Migrate from Travis-CI (Linux) and Appveyor (Win32) to GitHub Actions
- Win32 changes:
- switch to npcap from winpcap
- Simplify and update build scripts
- Encode version in DLL instead of in filename
- Add support for LLDP, mandatory TLVs.
- Add support for Cisco UniDirectional Link Detection (UDLD), RFC5171
- Initial support for unit tests:
- `libnet-build_ethernet()`
- Complete UDLD API tests
- Initial "devcontainer": provide VS Code development environment for
rapid setup of a development environment
- Run unit tests in GitHub Actions
- New GitHub Action for FreeBSD 13 clang/gcc
- Calling `libnet_init()` with a RAW type no longer sets a TX buffer max
size. Use the new `libnet_setfd_max_sndbuf()` instead when needed.
- Remove support for `SOCK_PACKET` sockets causing invalid builds on,
e.g., musl libc. We assume everyone on Linux has `PF_PACKET` now.
### Fixes
- Fix #139: fail-to-build-from-source on FreeBSD
- Fix #122: unused parameter warnings
- Fix #123: potential memory leak in `libnet_cq_add()`
- Fix #124: potential name conflict with C++ keyword `new`
- Fix #96: pointer type warnings when dumping raw data with `%p`
- Fix #97: non-standard types:
- `int64_t` instead of `__int64_t` for mingw cross build
- `uint32_t` instead of `u_int` and `uint16_t` instead of `u_short`
- Fix #98: lots of signed vs unsigned comparisons
- Fix #102: possible buffer overflows in `libnet_plist_chain_dump_string()`
- Reproducible build fixes for man-page generation, use LC_ALL=C and UTC
- Simplify `fixmanpages`
- Fix #120: possible NULL pointer dereference in `libnet_cq_add()`
- Fix #120: memory leak in `libnet_plist_chain_new()`
- Fix segmentation fault in `libnet_ifaddrlist()`
- Fix #150: segfault when number of IPs > 512
1.2
### Changes
- Removed Lua bindings from repo and dist files, now available separately
- Removed generated HTML and Nroff (man pages) documentation files, must
be regenerated with Doxygen using `make doc`
- Add `pkg-config` support with `libnet.pc`, replaces `libnet-config`
tool, although it is kept for compatibility for now
- Factorize socket setup code for socket opening to provide output
device selection for IPv4
- Make `libnet_get_hwaddr()` work with 802.1q interfaces in bpf (BSD)
- New API for OSPF HELLO messages, with neighbor
### Fixes
- Use `getifaddrs()` on OpnBSD and Linux
- For samples, `netinet/in.h` is not on windows
- Fix errors with missing `IPPROTO_MH` on windows
- Fix build error on Mac OS X
- Fix #34 checksum caculation when IPv6 extension headers being used
- Remove unneeded trailing `-Wl` from `-version-info` line
- `libnet_build_snmp()` fix warning
- Use `LIBNET_*RESOLVE` const in `libnet_name2addr*`
- Fix i486 sample synflood6 warning
- Some samples need `#include<netinet/in.h>` for `IPPROTO_*` on OpenBSD 5.2
- Fix gcc warnings
- Check for `socklen_t`. Suggested by g.esp and Stefanos Harhalakis
- libnet: update for obsolete INCLUDE directive
- Fix warning inside comment
- Automatic link options `#pragma comment(lib, ...)` are only for MSVC
- Fix several warnings for MS C/C++ compiler
- `libnet_open_raw4()` doesn't return a SOCKET on win32
- Fixes error messages sometimes include newline, sometimes not
- Properly set `l->err_buf` if `libnet_ifaddrlist()` fails
- dlpi: Try harder to find the device for the interface
- dlpi: Correctly extract unit number from devices with numbers in their
name
- Make interface selection work for interfaces with multiple addresses
- Fix memory leak, device list needs to freed after use
- Fix file descriptor leak in `libnet_ifaddrlist()`
- Fix `libnet_get_hwaddr()` for large(!) number of interfaces
- Fix to support musl libc, removes support for GLIBC <2.1
- Fix win32 buffer overrun in `libnet_get_ipaddr4()`
- Interface selection was ignoring interfaces with IPv6
- Use `LIBNET_API` on public functions, instead of an export file
- Add Visual Studio 2010 project files, with build instructions
- Define INET6 on IRIX, making libnet compile cleanly
- Check for FreeBSD pre-11 before enabling `LIBNET_BSD_BYTE_SWAP`
- Use `LIBNET_BSDISH_OS` and `LIBNET_BSD_BYTE_SWAP` on Darwin
- Add BSD byteswap for Darwin. Otherwise `sendto(` returns `EINVAL`
- `netinet/in.h` is needed for `IPPROTO_` and `sockaddr_in`
Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
---
config/rootfiles/common/libnet | 14 ++++++++------
lfs/libnet | 9 +++++----
2 files changed, 13 insertions(+), 10 deletions(-)
diff --git a/config/rootfiles/common/libnet b/config/rootfiles/common/libnet
index ffa20fd0e..07d741391 100644
--- a/config/rootfiles/common/libnet
+++ b/config/rootfiles/common/libnet
@@ -9,9 +9,11 @@
#usr/include/libnet/libnet-types.h
#usr/lib/libnet.a
#usr/lib/libnet.la
-usr/lib/libnet.so
-usr/lib/libnet.so.1
-usr/lib/libnet.so.1.7.0
-#usr/share/man/man3/libnet-functions.h.3
-#usr/share/man/man3/libnet-macros.h.3
-#usr/share/man/man3/libnet.h.3
+#usr/lib/libnet.so
+usr/lib/libnet.so.9
+usr/lib/libnet.so.9.0.0
+#usr/lib/pkgconfig/libnet.pc
+#usr/share/doc/libnet
+#usr/share/doc/libnet/ChangeLog.md
+#usr/share/doc/libnet/LICENSE
+#usr/share/doc/libnet/README.md
diff --git a/lfs/libnet b/lfs/libnet
index 7768d9fae..7f44f2f1e 100644
--- a/lfs/libnet
+++ b/lfs/libnet
@@ -1,7 +1,7 @@
###############################################################################
# #
# IPFire.org - A linux based firewall #
-# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> #
+# Copyright (C) 2007-2024 IPFire Team <info(a)ipfire.org> #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
@@ -24,7 +24,7 @@
include Config
-VER = 1.1.6
+VER = 1.3
THISAPP = libnet-$(VER)
DL_FILE = $(THISAPP).tar.gz
@@ -40,7 +40,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_BLAKE2 = 328ff98701fc19dc4f717e47ad5bc490741b248588eadc196de16b66ffa2df27ce58105c704d640fa6d93ba254259d4e90d03babdb33fc0f1f0e2b18ed448c4b
+$(DL_FILE)_BLAKE2 = b43f15143e6a1de3350b814d7acd4a41d61eb08e6dfeb729868e55f65c445942ae52905953f3a4fad00402b47fc5119634233ea3ae28806c1869bb34ef6fba9b
install : $(TARGET)
@@ -71,7 +71,8 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
@$(PREBUILD)
@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE)
$(UPDATE_AUTOMAKE)
- cd $(DIR_APP) && ./configure --prefix=/usr
+ cd $(DIR_APP) && ./configure \
+ --prefix=/usr
cd $(DIR_APP) && make $(MAKETUNING)
cd $(DIR_APP) && make install
@rm -rf $(DIR_APP)
--
2.45.2
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2024-08-09 10:53 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-08-09 10:53 [PATCH] libnet: Update to version 1.3 Adolf Belka
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox