* [PATCH] flac: Update to version 1.4.3
@ 2025-01-19 22:08 Adolf Belka
2025-01-19 22:08 ` [PATCH] nfs: Update to version number 2.8.2 Adolf Belka
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Adolf Belka @ 2025-01-19 22:08 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 5222 bytes --]
- Update from version 1.4.2 to 1.4.3
- Update of rootfile
- Changelog
1.4.3
As there have been additions to the libFLAC interfaces, the libFLAC version
number is incremented to 13. The libFLAC++ version number stays at 10.
* General
* All PowerPC-specific code has been removed, as it turned out those
improvements didn't actually improve anything
* Large improvements in encoder speed for all presets. The largest
change is for the fastest presets and for 24-bit and 32-bit inputs.
* Small improvement in decoder speed for BMI2-capable CPUs
* Various documentation fixes and cleanups (Mark Grassi, Jake Schmidt)
* Various fixes (Ozkan Sezer, Zhipeng Xue, orbea, Sam James, Harish
Mahendrakar)
* Fix building on Universal Windows Platform (Dmitry Kostjučenko)
* flac
* A lot of small fixes for bugs found by fuzzing
* Various improvements to the --keep-foreign-metadata and
--keep-foreign-metadata-if-present options on decoding
* The output format (WAV/AIFF/RF64 etc.) is now automatically
selected based on what kind of foreign metadata is stored
* Decoded file is checked afterwards, to see whether stored
foreign format data agrees with FLAC audio properties
* AIFF-C sowt data can now be restored
* Add --force-legacy-wave-format option, to decode to WAV with
WAVEFORMATPCM where WAVE_FORMAT_EXTENSIBLE would be more appropriate
* Add --force-aiff-c-none-format and --force-aiff-c-sowt-format to
decode to AIFF-C
* The storage of WAVEFORMATEXTENSIBLE_CHANNEL_MASK is no longer
restricted to known channel orderings
* Throw an error when WAV or AIFF files are over 4GiB in length and
the --ignore-chunk-sizes option is not set
* Warn on testing files when ID3v2 tags are found
* Warn when data trails the audio data of a WAV/AIFF/RF64/W64 file
* Fix output file not being deleted after error on Windows
* Removal of the --sector--align option
* metaflac
* A lot of small fixes for bugs found by fuzzing
* Added options --append and --data-format, which makes it possible to
copy metadata blocks from one FLAC file to another
* Added option --remove-all-tags-except
* Added option --show-all-tags (harridu, Martijn van Beurden)
* libFLAC
* No longer write seektables to Ogg, even when specifically asked for.
Seektables in Ogg are not defined
* Add functions FLAC__metadata_object_set_raw and
FLAC__metadata_object_get_raw to convert between blob and
FLAC__StreamMetadata
* Build system
* Autoconf (configure)
* The option --enable-64-bit-words is now on by default
* CMake
* The option ENABLE_64_BIT_WORDS is now on by default
* Testing/validation
* Fuzzers were added for the flac and metaflac command line tools
* Fuzzer coverage was improved
Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
---
config/rootfiles/packages/flac | 4 ++--
lfs/flac | 8 ++++----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/config/rootfiles/packages/flac b/config/rootfiles/packages/flac
index dbc2e726a..9d8c00ff1 100644
--- a/config/rootfiles/packages/flac
+++ b/config/rootfiles/packages/flac
@@ -19,11 +19,11 @@ usr/bin/metaflac
#usr/lib/libFLAC++.la
#usr/lib/libFLAC++.so
usr/lib/libFLAC++.so.10
-usr/lib/libFLAC++.so.10.0.0
+usr/lib/libFLAC++.so.10.0.1
#usr/lib/libFLAC.la
#usr/lib/libFLAC.so
usr/lib/libFLAC.so.12
-usr/lib/libFLAC.so.12.0.0
+usr/lib/libFLAC.so.12.1.0
#usr/lib/pkgconfig/flac++.pc
#usr/lib/pkgconfig/flac.pc
#usr/share/aclocal/libFLAC++.m4
diff --git a/lfs/flac b/lfs/flac
index f608d619c..9075e9f92 100644
--- a/lfs/flac
+++ b/lfs/flac
@@ -1,7 +1,7 @@
###############################################################################
# #
# IPFire.org - A linux based firewall #
-# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org> #
+# Copyright (C) 2007-2025 IPFire Team <info(a)ipfire.org> #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
@@ -26,7 +26,7 @@ include Config
SUMMARY = Free Lossless Audio Codec
-VER = 1.4.2
+VER = 1.4.3
THISAPP = flac-$(VER)
DL_FILE = $(THISAPP).tar.xz
@@ -34,7 +34,7 @@ DL_FROM = $(URL_IPFIRE)
DIR_APP = $(DIR_SRC)/$(THISAPP)
TARGET = $(DIR_INFO)/$(THISAPP)
PROG = flac
-PAK_VER = 4
+PAK_VER = 5
DEPS = libogg
@@ -48,7 +48,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_BLAKE2 = 60a40806c6c54fe836235cea2c476051c6f82e6a50ac6d160b4ab783b8b0c33f1763ba2816e5e490acd6320de0764ea3c4b35708820a17f40ccada3f72bac687
+$(DL_FILE)_BLAKE2 = c4f441aeaa0493433347b8a110ca01865fd40d5b21150174372af2fee4fa5c3397a67add31138e92999eab9d9abe6c46a5ac29e13cbac60093fbff6d7a672ad3
install : $(TARGET)
--
2.48.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] nfs: Update to version number 2.8.2
2025-01-19 22:08 [PATCH] flac: Update to version 1.4.3 Adolf Belka
@ 2025-01-19 22:08 ` Adolf Belka
2025-01-19 22:08 ` [PATCH] rpcbind: Update to version 1.2.7 Adolf Belka
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Adolf Belka @ 2025-01-19 22:08 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 11478 bytes --]
- Update from versionj number 2.7.1 to 2.8.2
- Update of rootfile
- Changelog
2.8.2
exports: Fix referrals when --enable-junction=no
Commit 15dc0bea ("exportd: Moved cache upcalls routines into
libexport.a") caused write_fsloc() to be elided when junction support is
disabled. Remove the not needed #ifdef HAVE_JUNCTION_SUPPORT which
blocks the referrals from working when --enable-junction=no is set.
(only the #ifdef HAVE_JUNCTION_SUPPORT should be around actual
junction code).
Fixes: 15dc0bea ("exportd: Moved cache upcalls routines into libexport.a")
Link: https://bugs.debian.org/1035908
Link: https://bugs.debian.org/1083098
nfsidmap(v2): Add guards around [nfsidmap] usages of [sysconf].
sysconf(_SC_GETPW_R_SIZE_MAX) and sysconf(_SC_GETGR_R_SIZE_MAX)
return -1 on musl, which causes either segmentation faults or ENOMEM
errors.
Replace all usages of sysconf with dedicated methods that guard against
a result of -1.
libnsm(v2): fix the safer atomic filenames fix
Commit 9f7a91b51ffc ("libnsm: safer atomic filenames") messed up the length
arguement to snprintf() in nsm_make_temp_pathname such that the length is
longer than the computed string. When compiled with "-O
-D_FORTIFY_SOURCE=3", __snprintf_chk will fail and abort statd.
The fix is to correct the original size calculation, then pull one from the
snprintf length for the final "/".
Revert "libnsm: fix the safer atomic filenames fix"
This reverts commit 8fcddae4437510137baf108f477d116ce345ce80.
libnsm: fix the safer atomic filenames fix
Commit 9f7a91b51ffc ("libnsm: safer atomic filenames") messed up the length
arguement to snprintf() in nsm_make_temp_pathname such that the length is
longer than the computed string. When compiled with "-O
-D_FORTIFY_SOURCE=3", __snprintf_chk will fail and abort statd.
The fix is to correct the original size calculation, then pull one from the
snprintf length for the final "/".
nfsd: dump default number of threads to 16
nfsdctl defaults to 16 threads. Since the nfs-server.service file first
tries nfsdctl and then falls back to rpc.nfsd, it would probably be wise
to make the default in rpc.nfsd and nfs.conf 16, for the sake of
consistency and to avoid surprises.
autoconf: don't build nfsdcltrack by default
Now that we've started the process to remove legacy v4 client tracking
methods, let's stop building nfsdcltrack by default.
nfs(5): Update rsize/wsize options
The rsize/wsize values are not multiples of 1024 but multiples of the
system's page size or powers of 2 if < system's page size as defined
in fs/nfs/internal.h:nfs_io_size().
nfsdctl: clarify when versions can be set on the man page
Attempting to make version changes while there are nfsd threads running
fails with -EBUSY, so make note of it on the man page.
nfsdctl: fix up the help text in version_usage()
The help text in version_usage() has examples with a 'v' character in
the version string, but the format string in the sscanf() call in
version_func() doesn't contain a 'v' character.
libnsm: safer atomic filenames
We've gotten a report of reboot notifications being sent to domains that
end in '.new', which can happen if the NSM temporary pathname code leaves a
file behind. Let's fix this up by prepending a single '.' to the temp path
which will never be resolvable as a DNS record.
https://lore.kernel.org/linux-nfs/04D30B5A-C53E-4920-ADCB-C77F5577669E(a)oracle.com/T/#t
nfs-utils: fixup statd testing simulator host arg
The getopt setup for the host arg was not expecing a value, update it as
expected
reexport.h: Include unistd.h to compile with musl
Makefile.am: allow mount.nfs to be writeable by owner
On Red Hat-based systems, the debug symbol files are built with a
.gdb_index section to speed up gdb initialization. The gdb-add-index
program calls objcopy to merge the index file into the object file.
That fails if the object file isn't writeable by the owner.
mount.nfs: retry NFSv3 mount after NFSv4 failure in auto negotiation
The problem happens when a v3 mount fails with ETIMEDOUT after
the v4 mount failed with EPROTONOSUPPORT, in mount auto negotiation.
It immediately breaks from the "for" loop in nfsmount_fg()
or nfsmount_child() due to EPROTONOSUPPORT, never doing the expected
retries until timeout.
2.8.1
nfs-utils: use getpwuid_r() and getpwnam_r() in gssd
gssd uses getpwuid(3) and getpwnam(3) in a pthreads context but
these functions are not thread safe.
nfsdcld: prevent from accessing /var/lib/nfs/nfsdcld in read-only file system during boot
I saw a VMWare guest that hit a rare condition during boot;
nfsdcld started too early to check access on /var/lib/nfs/nfsdcld which were
still in read-only file system as follows:
nfsdcld[...]: Unexpected error when checking access on /var/lib/nfs/nfsdcld: Read-only file system
systemd[1]: nfsdcld.service: Main process exited, code=exited, status=226/NAMESPACE
systemd[1]: nfsdcld.service: Failed with result 'exit-code'.
nfsdcld.service needs to wait the root file system to be remounted at least.
systemd: use nfsdctl to start and stop the nfs server
Attempt to use nfsdctl to start and stop the nfs-server. If that fails
for any reason, use rpc.nfsd to do it instead.
nfsdctl: asciidoc source for the manpage
Convert to manpage with:
asciidoctor -b manpage nfsdctl.adoc
nfsdctl: add the nfsdctl utility to nfs-utils
This tool is based on Lorenzo's original nfsdctl tool [1]. His original
tool used getopt_long to indicate the command, but that's somewhat
limiting. This converts it to a subcommand-based interface, where each
subcommand can take its own options, in the spirit of commands like
nmcli or virsh.
There are currently 6 different subcommands:
pool-mode get/set current pool mode setting
listener get/set listener info
version get/set supported NFS versions
threads get/set nfsd thread settings
status get current RPC processing info
autostart start server with settings from /etc/nfs.conf
Each can take different options, and we can expand this interface later
with more commands as necessary.
This is based on Lorenzo's original userland tool:
https://github.com/LorenzoBianconi/nfsdctl
rpc.idmapd: nfsopen() failures should not be fatal
dirscancb() loops over all clnt* subdirectories of /run/rpc_pipefs/nfs/.
Some of these directories contain /idmap files, others don't. nfsopen()
returns -1 for the latter; we then want to skip the directory, not abort
the entire scan.
mount.nfs: improve EPROTO error message for RDMA mounts
When mounting NFS shares using RDMA, users may encounter this rather
unclear error message:
mount.nfs: Protocol error
Often there are either no RDMA interfaces existing, or that routing is
being done via other interfaces. This patch enhances the `mount_error`
function to provide a more informative message in such cases.
support/junction/path.c: Fix buld for musl
Fixed:
path.c:164:24: error: implicit declaration of function 'strchrnul'; did you mean 'strchr'? [-Wimplicit-function-declaration]
[snip]
path.c:239:27: error: 'NAME_MAX' undeclared (first use in this function); did you mean 'AF_MAX'?
support/include/junction.h: Define macros for musl
Fixed 1:
In file included from cache.c:1217:
../../support/include/junction.h:128:21: error: expected ';' before 'char'
128 | __attribute_malloc__
| ^
| ;
129 | char **nfs_dup_string_array(char **array);
Fixed 2:
junction.c: In function 'junction_set_sticky_bit':
junction.c:164:39: error: 'ALLPERMS' undeclared (first use in this function)
164 | stb.st_mode &= (unsigned int)~ALLPERMS;
nfsdcld: don't send null client ids to the kernel
It's apparently possible for the sqlite database to get corrupted and
cause one or more rows to have null in the id column.
The knfsd fix was posted here:
https://lore.kernel.org/linux-nfs/20240903111446.659884-1-lilingfeng3(a)huawei.com/
nfsdcld should have a similar fix. If we encounter a client record with
a null id, just skip it instead of sending it to the kernel.
Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
---
config/rootfiles/packages/nfs | 4 ++--
lfs/nfs | 8 ++++----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/config/rootfiles/packages/nfs b/config/rootfiles/packages/nfs
index 2090e30e5..b8acffb58 100644
--- a/config/rootfiles/packages/nfs
+++ b/config/rootfiles/packages/nfs
@@ -1,7 +1,6 @@
etc/rc.d/init.d/nfs-server
sbin/mount.nfs
sbin/mount.nfs4
-sbin/nfsdcltrack
sbin/umount.nfs
sbin/umount.nfs4
#usr/include/nfsidmap.h
@@ -35,6 +34,7 @@ usr/sbin/nfsconf
usr/sbin/nfsdcld
usr/sbin/nfsdclddb
usr/sbin/nfsdclnts
+usr/sbin/nfsdctl
usr/sbin/nfsidmap
usr/sbin/nfsiostat
usr/sbin/nfsref
@@ -68,7 +68,7 @@ usr/sbin/start-statd
#usr/share/man/man8/nfsdcld.8
#usr/share/man/man8/nfsdclddb.8
#usr/share/man/man8/nfsdclnts.8
-#usr/share/man/man8/nfsdcltrack.8
+#usr/share/man/man8/nfsdctl.8
#usr/share/man/man8/nfsidmap.8
#usr/share/man/man8/nfsiostat.8
#usr/share/man/man8/nfsref.8
diff --git a/lfs/nfs b/lfs/nfs
index 3c7766645..a81586514 100644
--- a/lfs/nfs
+++ b/lfs/nfs
@@ -1,7 +1,7 @@
###############################################################################
# #
# IPFire.org - A linux based firewall #
-# Copyright (C) 2007-2024 IPFire Team <info(a)ipfire.org> #
+# Copyright (C) 2007-2025 IPFire Team <info(a)ipfire.org> #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
@@ -26,7 +26,7 @@ include Config
SUMMARY = Support Utilities for Kernel nfsd
-VER = 2.7.1
+VER = 2.8.2
THISAPP = nfs-utils-$(VER)
DL_FILE = $(THISAPP).tar.xz
@@ -34,7 +34,7 @@ DL_FROM = $(URL_IPFIRE)
DIR_APP = $(DIR_SRC)/$(THISAPP)
TARGET = $(DIR_INFO)/$(THISAPP)
PROG = nfs
-PAK_VER = 24
+PAK_VER = 25
DEPS = rpcbind
@@ -48,7 +48,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_BLAKE2 = 0b62f9e86c687c5608947b667526b23cb480c1c526a4303db4d3e551383e5d482ea5b088e26d7f70240abcac405db3668f71377679294bd80796b42717d05f3b
+$(DL_FILE)_BLAKE2 = b3b876dd1b4c745f4fe26b6ae9ec4690f7a946f5616276ce543a7cf0504156408e59682499b80aca4d09fe819de75c6499a11726bec0a392a277685199b56ac6
install : $(TARGET)
--
2.48.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] rpcbind: Update to version 1.2.7
2025-01-19 22:08 [PATCH] flac: Update to version 1.4.3 Adolf Belka
2025-01-19 22:08 ` [PATCH] nfs: Update to version number 2.8.2 Adolf Belka
@ 2025-01-19 22:08 ` Adolf Belka
2025-01-19 22:08 ` [PATCH] tcpdump: Update to version 4.99.5 Adolf Belka
2025-01-19 22:08 ` [PATCH] traceroute: Update to version 2.1.6 Adolf Belka
3 siblings, 0 replies; 5+ messages in thread
From: Adolf Belka @ 2025-01-19 22:08 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 3419 bytes --]
- Update from versio0n 1.2.6 to 1.2.7
- Update of rootfile
- Changelog
1.2.7
rpcinfo: try connecting using abstract address.
rpcinfo doesn't use library calls to set up the address for rpcbind. So
to get to it try the new abstract address, we need to explicitly
teach it how.
Listen on an AF_UNIX abstract address if supported.
As RPC is primarily a network service it is best, on Linux, to use
network namespaces to isolate it. However contacting rpcbind via an
AF_UNIX socket allows escape from the network namespace.
If clients could use an abstract address, that would ensure clients
contact an rpcbind in the same network namespace.
systemd can pass in a listening abstract socket by providing an '@'
prefix. However with libtirpc 1.3.3 or earlier attempting this will
fail as the library mistakenly determines that the socket is not bound.
This generates unsightly error messages.
So it is best not to request the abstract address when it is not likely
to work.
A patch to fix this also proposes adding a define for
_PATH_RPCBINDSOCK_ABSTRACT to the header files. We can check for this
and only include the new ListenStream when that define is present.
autotools/systemd: call rpcbind with -w only on enabled warm starts
If rpcbind is configured with --disable-warmstarts it responds on -w
with its usage string. This is not helpful in a systemd service, so pass
-w conditionally.
rpcbind: fix double free in init_transport
$ rpcbind -h 127.0.0.1
free(): double free detected in tcache 2
Aborted
Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
---
lfs/rpcbind | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/lfs/rpcbind b/lfs/rpcbind
index 31708192c..a707d9c05 100644
--- a/lfs/rpcbind
+++ b/lfs/rpcbind
@@ -1,7 +1,7 @@
###############################################################################
# #
# IPFire.org - A linux based firewall #
-# Copyright (C) 2007-2023 IPFire Team <info(a)ipfire.org> #
+# Copyright (C) 2007-2025 IPFire Team <info(a)ipfire.org> #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
@@ -26,7 +26,7 @@ include Config
SUMMARY = Transport independent RPC portmapper
-VER = 1.2.6
+VER = 1.2.7
THISAPP = rpcbind-$(VER)
DL_FILE = $(THISAPP).tar.bz2
@@ -34,7 +34,7 @@ DL_FROM = $(URL_IPFIRE)
DIR_APP = $(DIR_SRC)/$(THISAPP)
TARGET = $(DIR_INFO)/$(THISAPP)
PROG = rpcbind
-PAK_VER = 7
+PAK_VER = 8
DEPS =
@@ -48,7 +48,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_BLAKE2 = bb0e9f81e4747f8a732c9e25af561e79f2b6cd1c1955db586833871901b6da73f4b7ef32149a81b75daa81359b9c0554726670460b28857042dd66a2f861cac2
+$(DL_FILE)_BLAKE2 = f1e79b304ce5fe06c1c256d3512d999daffca782d956440f612b8a957ad7ddb35356b47aa4f4105d5b24d820daab32ec3a0f4a3b8ac76bb7adf5c3ed22d2ef01
install : $(TARGET)
--
2.48.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] tcpdump: Update to version 4.99.5
2025-01-19 22:08 [PATCH] flac: Update to version 1.4.3 Adolf Belka
2025-01-19 22:08 ` [PATCH] nfs: Update to version number 2.8.2 Adolf Belka
2025-01-19 22:08 ` [PATCH] rpcbind: Update to version 1.2.7 Adolf Belka
@ 2025-01-19 22:08 ` Adolf Belka
2025-01-19 22:08 ` [PATCH] traceroute: Update to version 2.1.6 Adolf Belka
3 siblings, 0 replies; 5+ messages in thread
From: Adolf Belka @ 2025-01-19 22:08 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 9463 bytes --]
- Update from version 4.99.4 to 4.99.5
- Update of rootfile not required
- Changelog
4.99.5
Refine protocol decoding for:
Arista: Use the test .pcap file from pull request #955 (HwInfo).
BGP: Fix an undefined behavior when it tries to parse a too-short packet.
CARP: Print the protocol name before any GET_().
CDP: only hex-dump unknown TLVs in verbose mode.
DHCP: parse the SZTP redirect tag.
DHCPv6: client-id/server-id DUID type 2 correction; parse the user class,
boot file URL, and SZTP redirect options; add DUID-UUID printing
(RFC6355).
DNS: Detect and correctly handle too-short URI RRs.
EAP: Assign ndo_protocol in the eap_print() function.
ESP: Don't use EVP_add_cipher_alias() (fixes building on OpenBSD 7.5).
Frame Relay (Multilink): Fix the Timestamp Information Element printing.
ICMPv6: Fix printing the Home Agent Address Discovery Reply Message.
IEEE 802.11: no need for an element ID in the structures for IEs, make
the length in the IE structures a u_int, include the "TA" field while
printing Block Ack Control frame.
IP: Enable TSO (TCP Segmentation Offload) support; fix printing invalid
cases as invalid, not truncated; use ND_ICHECKMSG_ZU() to test the
header length.
IPv6: Fix printing invalid cases as invalid, not truncated; use
ND_ICHECKMSG_U() to print an invalid version.
IPv6: Fix invalid 32-bit versus 64-bit printouts of fragment headers.
ISAKMP: Fix printing Delete payload SPI when size is zero.
Kerberos: Print the protocol name, remove a redundant bounds check.
lwres: Fix an undefined behavior in pointer arithmetic.
OpenFlow 1.0: Fix indentation of PORT_MOD, improve handling of
some lengths, and fix handling of snapend.
TCP: Test ports < 1024 in port order to select the printer.
UDP: Move source port equal BCM_LI_PORT to bottom of long if else chain.
UDP: Test ports < 1024 in port order to select the printer.
LDP: Add missing fields of the Common Session Parameters TLV and fix the
offset for the A&D bits.
NFLOG: Use correct AF code points on all OSes.
NFS: Avoid printing non-ASCII characters.
OSPF: Pad TLVs in LS_OPAQUE_TYPE_RI to multiples of 4 bytes.
OSPF: Update LS-Ack printing not to run off the end of the packet.
OSPF6: Fix an undefined behavior.
pflog: use nd_ types in struct pfloghdr.
PPP: Check if there is some data to hexdump.
PPP: Remove an extra colon before LCP Callback Operation.
Use the buffer stack for de-escaping PPP; fixes CVE-2024-2397;
Note: This problem does not affect any tcpdump release.
PTP: Fix spelling of type SIGNALING, Parse major and minor version
correctly, Print majorSdoId field instead of just the first bit.
RIP: Make a couple trivial protocol updates.
RPKI-Router: Refine length and bounds checks.
RX: Use the "%Y-%m-%d" date format.
smbutil.c: Use the "%Y-%m-%d" date format.
SNMP: Fix two undefined behaviors.
Text protocols: Fix printing truncation if it is not the case.
ZEP: Use the "%Y-%m-%d" date format.
ZMTP: Replace custom code with bittok2str().
User interface:
Print the supported time stamp types (-J) to stdout instead of stderr.
Print the list of data link types (-L) to stdout instead of stderr.
Use symmetrical quotation characters in error messages.
Update --version option to print 32/64-bit build and time_t size.
Improve error messages for invalid interface indexes specified
with -i.
Support "3des" as an alias for "des_ede3_cbc" even if the crypto
library doesn't support adding aliases.
Source code:
tcpdump: Fix a memory leak.
child_cleanup: reap as many child processes as possible.
Ignore failures when setting the default "any" device DLL to LINUX_SLL2.
Fix for backends which doesn't support capsicum.
Update ND_BYTES_BETWEEN() macro for better accuracy.
Update ND_BYTES_AVAILABLE_AFTER() macro for better accuracy.
Introduce new ND_ICHECK*() macros to deduplicate more code.
Skip privilege dropping when using -Z root on --with-user builds.
Add a nd_printjn() function.
Make nd_trunc_longjmp() not static inline.
Include <time.h> from netdissect.h.
Remove init_crc10_table() and the entourage.
Initialize tzcode early.
Capsicum support: Fix a 'not defined' macro error.
Update the "Error converting time" tests for packet times.
Fix warnings when building for 32-bit and defining _TIME_BITS=64.
Free interface list just before exiting where it wasn't being
freed.
Building and testing:
Add a configure option to help debugging (--enable-instrument-functions).
At build time require a proof of suitable snprintf(3) implementation in
libc (and document Solaris 9 as unsupported because of that).
Makefile.in: Add two "touch .devel" commands in the releasecheck target.
Autoconf: Get --with-user and --with-chroot right.
Autoconf: Fix --static-pcap-only test on Solaris 10.
Autoconf: Add some warning flags for clang 13 or newer.
Autoconf: Update config.{guess,sub}, timestamps 2024-01-01.
Autoconf: Add autogen.sh, remove configure and config.h.in and put
these generated files in the release tarball.
Autoconf: Update the install-sh script to the 2020-11-14.01 version.
configure: Apply autoupdate 2.69.
CMake: improve the comment before project(tcpdump C).
Do not require vsnprintf().
tests: Use the -tttt option, by default, for the tests.
Autoconf, CMake: Get the size of a void * and a time_t.
Fix propagation of cc_werr_cflags() output.
Makefile.in: Fix the depend target.
mkdep: Exit with a non-zero status if a command fails.
Autoconf: use V_INCLS to update the list of include search paths.
Autoconf: don't put anything before -I and -L flags for local libpcap.
Autoconf, CMake: work around an Xcode 15+ issue.
Autoconf, CMake: use pkg-config and Homebrew when looking for
libcrypto.
Fix Sun C invocation from CMake.
mkdep: Use TMPDIR if it is set and not null.
Add initial support for building with TinyCC.
Makefile.in: Use the variable MAKE instead of the make command.
Makefile.in: Add instrumentation configuration in releasecheck target.
Make various improvements to the TESTrun script.
Untangle detection of pcap_findalldevs().
Autoconf: don't use egrep, use $EGREP.
Autoconf: check for gethostbyaddr(), not gethostbyname().
Autoconf, CMake: search for gethostbyaddr() in libnetwork.
Make illumos build warning-free.
Documentation:
Fixed errors in doc/README.Win32.md and renamed it to README.windows.md.
Make various improvements to the man page.
Add initial README file for Haiku.
Make various improvements to CONTRIBUTING.md.
Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
---
lfs/tcpdump | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/lfs/tcpdump b/lfs/tcpdump
index 4015577ce..2ac5b19de 100644
--- a/lfs/tcpdump
+++ b/lfs/tcpdump
@@ -1,7 +1,7 @@
###############################################################################
# #
# IPFire.org - A linux based firewall #
-# Copyright (C) 2007-2023 IPFire Team <info(a)ipfire.org> #
+# Copyright (C) 2007-2025 IPFire Team <info(a)ipfire.org> #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
@@ -26,15 +26,15 @@ include Config
SUMMARY = A Packet Sniffer
-VER = 4.99.4
+VER = 4.99.5
THISAPP = tcpdump-$(VER)
-DL_FILE = $(THISAPP).tar.gz
+DL_FILE = $(THISAPP).tar.xz
DL_FROM = $(URL_IPFIRE)
DIR_APP = $(DIR_SRC)/$(THISAPP)
TARGET = $(DIR_INFO)/$(THISAPP)
PROG = tcpdump
-PAK_VER = 16
+PAK_VER = 17
DEPS =
@@ -48,7 +48,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_BLAKE2 = f100e10774574ef04a770bc30d4e2d06fd0f1f16a7b2c88848be6e8290cc4838666ff378d9f78fdc418f4ffab9716a11214edc3588c292cb5ff39636cd7cfd2d
+$(DL_FILE)_BLAKE2 = 30b8e81e29f37f220ab9301185301190c5abb6ee8a8105c899e53e96b93265d3d408a181b75ee18bd70f96494c5dcf12374aedddd1db6fd7ab41e5c5ba35c7e5
install : $(TARGET)
@@ -80,7 +80,7 @@ $(subst %,%_BLAKE2,$(objects)) :
$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
@$(PREBUILD)
- @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE)
+ @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
cd $(DIR_APP) && \
./configure \
--prefix=/usr \
--
2.48.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] traceroute: Update to version 2.1.6
2025-01-19 22:08 [PATCH] flac: Update to version 1.4.3 Adolf Belka
` (2 preceding siblings ...)
2025-01-19 22:08 ` [PATCH] tcpdump: Update to version 4.99.5 Adolf Belka
@ 2025-01-19 22:08 ` Adolf Belka
3 siblings, 0 replies; 5+ messages in thread
From: Adolf Belka @ 2025-01-19 22:08 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 2628 bytes --]
- Update from version 2.1.5 to 2.1.6
- Update of rootfile not required
- Updated version number in name of patch
- Changelog
2.1.6
Let getaddrinfo(3) select the default IPv4 or IPv6 protocol version
when it is not explicitly specified on the command line
(Jan Macku, SF bug #16)
No more mandatory default to IPv4, follow rfc3484 and
the similar ping(1) behaviour. Drop DEF_AF macro.
Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
---
lfs/traceroute | 8 ++++----
...e-2.1.5-ipfire.patch => traceroute-2.1.6-ipfire.patch} | 0
2 files changed, 4 insertions(+), 4 deletions(-)
rename src/patches/{traceroute-2.1.5-ipfire.patch => traceroute-2.1.6-ipfire.patch} (100%)
diff --git a/lfs/traceroute b/lfs/traceroute
index 961e44771..8c9f0d2a3 100644
--- a/lfs/traceroute
+++ b/lfs/traceroute
@@ -1,7 +1,7 @@
###############################################################################
# #
# IPFire.org - A linux based firewall #
-# Copyright (C) 2007-2024 IPFire Team <info(a)ipfire.org> #
+# Copyright (C) 2007-2025 IPFire Team <info(a)ipfire.org> #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
@@ -26,7 +26,7 @@ include Config
SUMMARY = Packet route path tracing utility
-VER = 2.1.5
+VER = 2.1.6
THISAPP = traceroute-$(VER)
DL_FILE = $(THISAPP).tar.gz
@@ -34,7 +34,7 @@ DL_FROM = $(URL_IPFIRE)
DIR_APP = $(DIR_SRC)/$(THISAPP)
TARGET = $(DIR_INFO)/$(THISAPP)
PROG = traceroute
-PAK_VER = 6
+PAK_VER = 7
DEPS =
@@ -48,7 +48,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_BLAKE2 = b2e99398b23d064f96319c9ca677589175f4bde64bce1f1d3236fc94f0ae3aa00499a2ef4a5c66c3a5815e09e16c534d049c36745119850c90c8af879ef66c6b
+$(DL_FILE)_BLAKE2 = 452daa7cbf5322981a36cc1e155447ea617ed4a0dfa9ef4f67ff7d2c36c7b9bc6145ddb1111eca5489ccc038f30fb0799def27efae1c385e043e9243339361cb
install : $(TARGET)
diff --git a/src/patches/traceroute-2.1.5-ipfire.patch b/src/patches/traceroute-2.1.6-ipfire.patch
similarity index 100%
rename from src/patches/traceroute-2.1.5-ipfire.patch
rename to src/patches/traceroute-2.1.6-ipfire.patch
--
2.48.1
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2025-01-19 22:08 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2025-01-19 22:08 [PATCH] flac: Update to version 1.4.3 Adolf Belka
2025-01-19 22:08 ` [PATCH] nfs: Update to version number 2.8.2 Adolf Belka
2025-01-19 22:08 ` [PATCH] rpcbind: Update to version 1.2.7 Adolf Belka
2025-01-19 22:08 ` [PATCH] tcpdump: Update to version 4.99.5 Adolf Belka
2025-01-19 22:08 ` [PATCH] traceroute: Update to version 2.1.6 Adolf Belka
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox