[PATCH] core198: Ship ed

[PATCH] core198: Ship ed

[Adolf Belka]

Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
---
 config/rootfiles/core/198/filelists/ed | 1 +
 1 file changed, 1 insertion(+)
 create mode 120000 config/rootfiles/core/198/filelists/ed

diff --git a/config/rootfiles/core/198/filelists/ed b/config/rootfiles/core/198/filelists/ed
new file mode 120000
index 000000000..0ed331cfa
--- /dev/null
+++ b/config/rootfiles/core/198/filelists/ed
@@ -0,0 +1 @@
+../../../common/ed
\ No newline at end of file
-- 
2.51.0

[PATCH] core198: Ship expat

[Adolf Belka]

Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
---
 config/rootfiles/core/198/filelists/expat | 1 +
 1 file changed, 1 insertion(+)
 create mode 120000 config/rootfiles/core/198/filelists/expat

diff --git a/config/rootfiles/core/198/filelists/expat b/config/rootfiles/core/198/filelists/expat
new file mode 120000
index 000000000..e1923cf63
--- /dev/null
+++ b/config/rootfiles/core/198/filelists/expat
@@ -0,0 +1 @@
+../../../common/expat
\ No newline at end of file
-- 
2.51.0

[PATCH] core198: Ship less

[Adolf Belka]

Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
---
 config/rootfiles/core/198/filelists/less | 1 +
 1 file changed, 1 insertion(+)
 create mode 120000 config/rootfiles/core/198/filelists/less

diff --git a/config/rootfiles/core/198/filelists/less b/config/rootfiles/core/198/filelists/less
new file mode 120000
index 000000000..65c0e0771
--- /dev/null
+++ b/config/rootfiles/core/198/filelists/less
@@ -0,0 +1 @@
+../../../common/less
\ No newline at end of file
-- 
2.51.0

[PATCH] core198: Ship lzip

[Adolf Belka]

Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
---
 config/rootfiles/core/198/filelists/lzip | 1 +
 1 file changed, 1 insertion(+)
 create mode 120000 config/rootfiles/core/198/filelists/lzip

diff --git a/config/rootfiles/core/198/filelists/lzip b/config/rootfiles/core/198/filelists/lzip
new file mode 120000
index 000000000..dd4b832b1
--- /dev/null
+++ b/config/rootfiles/core/198/filelists/lzip
@@ -0,0 +1 @@
+../../../common/lzip
\ No newline at end of file
-- 
2.51.0

[PATCH] ed: Update to version 1.22.2

[Adolf Belka]

- Update from version 1.20.2 to 1.22.2
- Update of rootfile not required
- Changelog
    1.22.2
	* Newline characters are no longer allowed in file names even when
	  '--unsafe-names' is specified.
	* The file name is now printed escaped also when replaced into a shell command.
    1.22.1
	* Ed now departs from POSIX and ignores SIGPIPE to prevent commands like 'w !:'
	  or ',!:' from terminating ed. A broken pipe is now detected as any other
	  write error. (Reported by Sergei Trofimovich).
    1.22
	* An ex(1) style filter has been implemented; the shell escape command (!) now
	  accepts line addresses to filter the addressed lines through a shell command.
	  (Suggested by Shawn Wagner, Andrew L. Moore, and John Cowan).
    1.21.1
	* Fixed a compilation failure caused by the inclusion of the unused and
	  obsolete header <sys/file.h>. (Reported by Michael Mikonos).
	* Ed now reads the initial window size for the z command from the environment
	  variable LINES. (Suggested by Artyom Bologov).
    1.21
	* 'r !command' and 'w !command' ignore again the exit status of 'command'. Bug
	  introduced in version 1.6. (Reported by Andrew L. Moore).
	* Include 'stdbool.h' instead of defining 'bool' to fix compilation in C23.
	  (Reported by Alexander Jones).
	* The messages "Newline inserted" and "Newline appended" are now suppressed in
	  scripted mode (-s). (Reported by Artyom Bologov).
	* The chapter 'Syntax of command-line arguments' has been added to the manual.

Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
---
 lfs/ed | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/lfs/ed b/lfs/ed
index 2e2bb8f72..45c66883b 100644
--- a/lfs/ed
+++ b/lfs/ed
@@ -1,7 +1,7 @@
 ###############################################################################
 #                                                                             #
 # IPFire.org - A linux based firewall                                         #
-# Copyright (C) 2007-2024  IPFire Team  <info@ipfire.org>                     #
+# Copyright (C) 2007-2025  IPFire Team  <info@ipfire.org>                     #
 #                                                                             #
 # This program is free software: you can redistribute it and/or modify        #
 # it under the terms of the GNU General Public License as published by        #
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 1.20.2
+VER        = 1.22.2
 
 THISAPP    = ed-$(VER)
 DL_FILE    = $(THISAPP).tar.lz
@@ -43,7 +43,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE)                     = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_BLAKE2 = 5a9d36dba98488e3cacb3e4c0b9d70003345ca94dbf9a3ebd3181b93567b9ef94df0e72614e99e2c6dde4929933d9333c6dba90fafcea6962e2c1abccb0525af
+$(DL_FILE)_BLAKE2 = ee43321ea319129d391ef5d221b1a14b04169016c8ff327acd3f39ec5f901e7b013ac24a6790e6f04c5a51e4d7d10c202ced7528a5e74d1ed08a6e286405188d
 
 install : $(TARGET)
 
-- 
2.51.0

[PATCH] expat: Update to version 2.7.2

[Adolf Belka]

- Update from version 2.7.1 to 2.7.2
- Update of rootfile
- CVE fix
- Changelog
    2.7.2
        Security fixes:
		CVE-2025-59375 -- Disallow use of disproportional amounts of
                    dynamic memory from within an Expat parser (e.g. previously
                    a ~250 KiB sized document was able to cause allocation of
                    ~800 MiB from the heap, i.e. an "amplification" of factor
                    ~3,300); once a threshold (that defaults to 64 MiB) is
                    reached, a maximum amplification factor (that defaults to
                    100.0) is enforced, and violating documents are rejected
                    with an out-of-memory error.
                    There are two new API functions to fine-tune this new
                    behavior:
                      - XML_SetAllocTrackerActivationThreshold
                      - XML_SetAllocTrackerMaximumAmplification .
                    If you ever need to increase these defaults for non-attack
                    XML payload, please file a bug report with libexpat.
                      There is also a new environment variable
                    EXPAT_MALLOC_DEBUG=(0|1|2) to control the verbosity
                    of allocations debugging at runtime, disabled by default.
                      Known impact is (reliable and easy) denial of service:
                    CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H/E:H/RL:O/RC:C
                    (Base Score: 7.5, Temporal Score: 7.2)
                    Please note that a layer of compression around XML can
                    significantly reduce the minimum attack payload size.
                      Distributors intending to backport (or cherry-pick) the
                    fix need to copy 99% of the related pull request, not just
                    the "lib: Implement tracking of dynamic memory allocations"
                    commit, to not end up with a state that literally does both
                    too much and too little at the same time. Appending ".diff"
                    to the pull request URL could be of help.
        Other changes:
		Autotools: Sync CMake templates with CMake 3.31 for macOS
		CMake: Drop support for CMake <3.15
		CMake: Fix off_t detection for -Werror
		CMake|Windows: Fix -DEXPAT_MSVC_STATIC_CRT=ON
		Windows: Drop support for Visual Studio <=16.0/2019
		xmlwf: Mention supported environment variables in
			--help output
		xmlwf: Fix (internal) help generator
		docs: Promote the contract to call function
			XML_FreeContentModel when registering a custom
			element declaration handler (via a call to function
			XML_SetElementDeclHandler)
		docs: Add missing <p>..</p> wrap
		docs: Drop AppVeyor badge
		tests: Fix portable_strndup
		Drop casts around malloc/free/realloc that C99 does not need
		Replace empty for-loops with while loops
		Add const with internal XmlInitUnknownEncodingNS
		Drop an OpenVMS support leftover
		Address more clang-tidy warnings
		Version info bumped from 11:2:10 (libexpat*.so.1.10.2)
			to 12:0:11 (libexpat*.so.1.11.0); see https://verbump.de/
			for what these numbers do
		        Infrastructure:
		CI: Cover compilation on FreeBSD
		CI: Upgrade Clang from 19 to 21
		CI: Make calling Cppcheck without --suppress=objectIndex
			and --suppress=unknownMacro possible
		CI|Windows: Get off of deprecated image "windows-2019"
		CI: Adapt to breaking changes in GitHub Actions

Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
---
 config/rootfiles/common/expat | 20 ++++++++++----------
 lfs/expat                     |  4 ++--
 2 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/config/rootfiles/common/expat b/config/rootfiles/common/expat
index 7c34af7c8..1ef7450df 100644
--- a/config/rootfiles/common/expat
+++ b/config/rootfiles/common/expat
@@ -2,21 +2,21 @@
 #usr/include/expat.h
 #usr/include/expat_config.h
 #usr/include/expat_external.h
-#usr/lib/cmake/expat-2.7.1
-#usr/lib/cmake/expat-2.7.1/expat-config-version.cmake
-#usr/lib/cmake/expat-2.7.1/expat-config.cmake
-#usr/lib/cmake/expat-2.7.1/expat-noconfig.cmake
-#usr/lib/cmake/expat-2.7.1/expat.cmake
+#usr/lib/cmake/expat-2.7.2
+#usr/lib/cmake/expat-2.7.2/expat-config-version.cmake
+#usr/lib/cmake/expat-2.7.2/expat-config.cmake
+#usr/lib/cmake/expat-2.7.2/expat-noconfig.cmake
+#usr/lib/cmake/expat-2.7.2/expat.cmake
 #usr/lib/libexpat.la
 #usr/lib/libexpat.so
 usr/lib/libexpat.so.1
-usr/lib/libexpat.so.1.10.2
+usr/lib/libexpat.so.1.11.0
 #usr/lib/pkgconfig/expat.pc
 #usr/share/doc/expat
-#usr/share/doc/expat-2.7.1
-#usr/share/doc/expat-2.7.1/ok.min.css
-#usr/share/doc/expat-2.7.1/reference.html
-#usr/share/doc/expat-2.7.1/style.css
+#usr/share/doc/expat-2.7.2
+#usr/share/doc/expat-2.7.2/ok.min.css
+#usr/share/doc/expat-2.7.2/reference.html
+#usr/share/doc/expat-2.7.2/style.css
 #usr/share/doc/expat/AUTHORS
 #usr/share/doc/expat/changelog
 #usr/share/man/man1/xmlwf.1
diff --git a/lfs/expat b/lfs/expat
index b88c4e197..77fd84bfc 100644
--- a/lfs/expat
+++ b/lfs/expat
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 2.7.1
+VER        = 2.7.2
 
 THISAPP    = expat-$(VER)
 DL_FILE    = $(THISAPP).tar.xz
@@ -40,7 +40,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_BLAKE2 = 243ef1c3578234135018d31b567c88a50cadddac86441e4d4a6d6330e113596edbad13b40c79f541d49487e7df98d798032d39ec28b7d67d22f46e4290d14519
+$(DL_FILE)_BLAKE2 = 35525274817dab4d6ae8698f5f83978e633a6e4afe7cf3b126c87d5aba4b64bcb9d26ec3e4a39b1ea82a7430e290950595bfa4150266ef3806026b423a870e33
 
 install : $(TARGET)
 
-- 
2.51.0

[PATCH] less: Update to version 679

[Adolf Belka]

- Update from version 678 to 679
- Update of rootfile not required
- Changelog
    679
	    Fix bad parsing of lesskey file an env var is a prefix of another env var
		(github #626).
	    Fix unexpected exit using -K if a key press is received while reading the
		input file (github #628).

Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
---
 lfs/less | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/lfs/less b/lfs/less
index 33b40ac68..0a60623f6 100644
--- a/lfs/less
+++ b/lfs/less
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 678
+VER        = 679
 
 THISAPP    = less-$(VER)
 DL_FILE    = $(THISAPP).tar.gz
@@ -40,7 +40,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_BLAKE2 = 5e6644a8c66f35f1b3ab72a0727c76922b7d3cf299d5d1cf1c94882e8b0d3ec0461cd351e6b2db554b331d993760db8eb17209f41f271f5704fee0caf8d6540e
+$(DL_FILE)_BLAKE2 = 024cd7f4014958e9be52a89aefd9404298850c56f0f8d2403e8648b06ce37bcca6742ebd8a3a4900acb78a3884c4f17270919feb3ca76c6978c34ec79043f154
 
 install : $(TARGET)
 
-- 
2.51.0

[PATCH] libvirt: Update to version 11.7.0

[Adolf Belka]

- Update from version 11.4.0 to 11.7.0
- Update of rootfile
- Changelog
    11.7.0
	New features
	  * Allow setting the log level of Cloud Hypervisor
	    Users can now configure the verbosity of Cloud Hypervisor by setting
	    the "log_level" option in ch.conf
	  * bhyve: experimental NAT networking support
	    The bhyve driver now has experimental NAT networking support
	    using the Packet Filter (pf) firewall.
	  * bhyve: domain statistics reporting
	    The bhyve driver now supports querying domain block, interface,
	    and memory statistics. Not all statistics fields are supported though.
	Improvements
	  * bhyve: improve 'efi' configuration autofill
	    When a domain is configured with ``<os firmware='efi'/>``, NVRAM
	    configuration is now autofilled.
    11.6.0
	New features
	  * Introduce VIR_CONNECT_BASELINE_CPU_IGNORE_HOST flag
	    This new flag for virConnectBaselineHypervisorCPU can be used for computing
	    a baseline CPU on any host. Without the VIR_CONNECT_BASELINE_CPU_IGNORE_HOST
	    flag the baseline API would return reasonable output only when run on one of
	    the hosts that the input CPU definitions were collected from.
	  * Allow control over QEMU TLS priority strings
	    The qemu.conf file now has multiple settings allowing control over the
	    QEMU TLS priority strings, for the different subsystems in QEMU that
	    can support TLS. This can be used to workaround a current bug in GNUTLS
	    that is liable to cause crashes of the source QEMU when performing long
	    running live migration operations with TLS enabled.
	  * Add support for disabling deprecated CPU model features by default for s390
	    domains. Starting an s390 domain with host-model will now default to
	    setting the ``deprecated_features`` attribute to ``off``, ensuring the
	    domain starts with a migration-compatible CPU model to newer systems. This
	    behavior can be modified by setting the ``default_cpu_deprecated_features``
	    option in the qemu.conf file.
	  * bhyve: Add TCP console support
	    TCP serial devices can now be configured with ``<serial type='tcp'>``::
	      <serial type='tcp'>
	        <source mode='bind' host='127.0.0.1' service='12345'/>
	        <target type='serial' port='0'/>
	      </serial>
	    Additionally, number of supported consoles increased to 4.
	  * qemu: Add support for RBD namespaces
	    Allow specifying the 'namespace' within a RBD image pool.
	Improvements
	  * qemu: Change default SCSI controller model to ``virtio-scsi`` for ARM and
	    RISC-V The previous default of ``lsilogic`` is unsupported by modern
	    operating systems. ``virtio-scsi`` is a more suitable default for ARM and
	    RISC-V ``virt`` machine types.
	  * Clarify documentation of virConnectBaselineHypervisorCPU
	    The documentation makes it clear virConnectBaselineHypervisorCPU is
	    supposed to be called on one of the hosts represented in the input CPU
	    definitions. Otherwise the API will give unexpected results.
	  * Allow specifying zero discard granularity for block devices
	    This can be used to tell some guest operating systems (notably Windows) to
	    not trim the disk.
	  * bhyve: Add timeout handling for bhyveload
	    It is now possible to run ``bhyveload`` with the ``timeout`` tool, which
	    can send ``SIGTERM`` and ``SIGKILL`` signals when timeout is reached.
	    Timeout values are set using the ``bhyveload_timeout`` and
	    ``bhyveload_timeout_kill`` configuration options in ``bhyve.conf``.
	  * nss: Improve debugging
	    Debugging messages from NSS modules can be now enabled by setting the
	    ``LIBVIRT_NSS_DEBUG`` environment variable. So far, there is no special
	    meaning to its value.
	  * rpc: Removed requirement for TLS certificates to support 'key encipherment'
	    With TLS 1.3, key encipherment is not required even for RSA keys. Other key
	    types didn't even support it so they were wrongly refused even in cases when
	    they would work with libvirt. The TLS certificate validation now no longer
	    requires 'key encipherment' to be enabled.
	Bug fixes
	  * bhyve: Fix resetting of the autostart flag of the domain on destroy.
	  * The nwfilter driver no longer recreates the base iptable/ip6tables chains
	    The nwfilter driver had a impl mistake causing it to recreate the
	    base chains for iptables/ip6tables every time a VM was started.
	    This allowed a small window where traffic might not be fully
	    filtered. It now handles iptables/ip6tables the same way as
	    ebtables, creating the base chains only if they did not already
	    exist.
	  * Fix systemd unit ordering for auto-shutdown of domains via the daemon
	    The ordering of systemd units created by libvirt for individual machines
	    needed to be adapted when the shutdown of VMs on host shutdown is done
	    via the virt daemon itself (rather than ``libvirt-guests.service``) to
	    ensure that the VMs are not terminated before the virt daemon can deal with
	    them.
    11.5.0
	Removed features
	  * qemu: Don't accept VIR_DUMP_LIVE flag in virDomainCoreDumpWithFormat()
	    Unfortunately, QEMU always pauses vCPUs when doing a core dump. Therefore,
	    there is no way for Libvirt to honor VIR_DUMP_LIVE flag semantics. Instead
	    of silently pretending the flag works, an appropriate error is now
	    reported.
	New features
	  * vmx: Add support for reporting NVMe disks in the domain XML
	  * qemu: Add support for NVMe disks
	    NVMe disks can now be emulated by using an ``nvme`` bus, but require a
	    serial due to the hypervisor::
	      <target dev='nvme0n1' bus='nvme'/>
	      <serial>qwertyuiop</serial>
	    Multiple disks can be represented as different namespaces on the same
	    controller, but they cannot have a different serial number due to the fact
	    that it is the controller which ultimately has the serial number attached to
	    it, but for ease of use it is automatically copied from the disk serial.
	  * esx: Add support for specifying alternative CA bundle for remote peer
	    verification. Users can now use ``cacert`` parameter in the URI to specify
	    a file path with CA certificate(s) that will be used for remote peer
	    certificate validation.
	  * qemu: add support for AMD IOMMU device
	    The ``amd`` model for the ``<iommu>`` device is now supported.
	    New attributes ``passtrhough`` and ``xtsup`` are also supported for this
	    model.
	Improvements
	  * Include supported console types in domain capabilities
	    Domain capabilities now include information about supported console types,
	    such as::
	      <console supported='yes'>
	        <enum name='type'>
	          <value>pty</value>
	          <value>tcp</value>
	        </enum>
	      </console>
	  * virsh: Add waiting for domain state via ``virsh await``
	    The new helper command ``virsh await`` simplifies waiting on domain state
	    which is normally announced via events. Currently two waiting conditions are
	    implemented: ``domain-inactive``, and ``guest-agent-available``.
	Bug fixes
	  * qemu: Be more forgiving when acquiring QUERY job when formatting domain XML
	    Since ``libvirt-11.0.0`` the ``virDomainGetXMLDesc()`` API used to format
	    domain XML acquires QUERY job. But this caused a regression when the API
	    might timeout for incoming migration. This is now fixed.
	  * qemu: Fix shared filesystem detection on nonexistent paths
	    Since ``libvirt-11.1.0`` nonexistent paths within directories marked as
	    shared filesystem (via the ``shared_filesystems`` option in ``qemu.conf``
	    would not be properly detected as being on a shared filesystem.
	  * qemu: Properly emulate USB cdrom device
	    CD-ROM devices on USB bus are now properly emulated as such which was not
	    the case since libvirt switched to the modern qemu commandline syntax for
	    storage backends.

Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
---
 config/rootfiles/packages/libvirt | 13 ++++--
 lfs/libvirt                       | 66 +++++++++++++++----------------
 2 files changed, 41 insertions(+), 38 deletions(-)

diff --git a/config/rootfiles/packages/libvirt b/config/rootfiles/packages/libvirt
index d265125b0..718debf7e 100644
--- a/config/rootfiles/packages/libvirt
+++ b/config/rootfiles/packages/libvirt
@@ -1,4 +1,5 @@
 #etc/libvirt
+etc/libvirt/ch.conf
 etc/libvirt/libvirt-admin.conf
 etc/libvirt/libvirt.conf
 etc/libvirt/libvirtd.conf
@@ -87,16 +88,16 @@ usr/bin/virt-xml-validate
 #usr/lib/libvirt
 #usr/lib/libvirt-admin.so
 usr/lib/libvirt-admin.so.0
-usr/lib/libvirt-admin.so.0.11004.0
+usr/lib/libvirt-admin.so.0.11007.0
 #usr/lib/libvirt-lxc.so
 usr/lib/libvirt-lxc.so.0
-usr/lib/libvirt-lxc.so.0.11004.0
+usr/lib/libvirt-lxc.so.0.11007.0
 #usr/lib/libvirt-qemu.so
 usr/lib/libvirt-qemu.so.0
-usr/lib/libvirt-qemu.so.0.11004.0
+usr/lib/libvirt-qemu.so.0.11007.0
 #usr/lib/libvirt.so
 usr/lib/libvirt.so.0
-usr/lib/libvirt.so.0.11004.0
+usr/lib/libvirt.so.0.11007.0
 #usr/lib/libvirt/connection-driver
 usr/lib/libvirt/connection-driver/libvirt_driver_ch.so
 usr/lib/libvirt/connection-driver/libvirt_driver_interface.so
@@ -141,10 +142,12 @@ usr/sbin/virtstoraged
 #usr/share/augeas/lenses
 #usr/share/augeas/lenses/libvirt_lockd.aug
 #usr/share/augeas/lenses/libvirtd.aug
+#usr/share/augeas/lenses/libvirtd_ch.aug
 #usr/share/augeas/lenses/libvirtd_qemu.aug
 #usr/share/augeas/lenses/tests
 #usr/share/augeas/lenses/tests/test_libvirt_lockd.aug
 #usr/share/augeas/lenses/tests/test_libvirtd.aug
+#usr/share/augeas/lenses/tests/test_libvirtd_ch.aug
 #usr/share/augeas/lenses/tests/test_libvirtd_qemu.aug
 #usr/share/augeas/lenses/tests/test_virtchd.aug
 #usr/share/augeas/lenses/tests/test_virtinterfaced.aug
@@ -426,6 +429,8 @@ usr/share/libvirt/schemas/storagecommon.rng
 usr/share/libvirt/schemas/storagepool.rng
 usr/share/libvirt/schemas/storagepoolcaps.rng
 usr/share/libvirt/schemas/storagevol.rng
+#usr/share/libvirt/schemas/sysinfo.rng
+#usr/share/libvirt/schemas/sysinfocommon.rng
 #usr/share/libvirt/test-screenshot.png
 #usr/share/locale/as/LC_MESSAGES/libvirt.mo
 #usr/share/locale/bg/LC_MESSAGES/libvirt.mo
diff --git a/lfs/libvirt b/lfs/libvirt
index dc8e0aa99..90e5a4696 100644
--- a/lfs/libvirt
+++ b/lfs/libvirt
@@ -26,7 +26,7 @@ include Config
 
 SUMMARY	   = Server side daemon and supporting files for libvirt
 
-VER        = 11.4.0
+VER        = 11.7.0
 
 THISAPP    = libvirt-$(VER)
 DL_FILE    = $(THISAPP).tar.xz
@@ -35,7 +35,7 @@ DIR_APP    = $(DIR_SRC)/$(THISAPP)
 TARGET     = $(DIR_INFO)/$(THISAPP)
 SUP_ARCH   = x86_64 aarch64
 PROG       = libvirt
-PAK_VER    = 41
+PAK_VER    = 42
 
 DEPS       = ebtables libpciaccess ovmf swtpm qemu
 
@@ -49,7 +49,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_BLAKE2 = 54d2b9cb35394184d2ce22670623849ecfb54abd1c8e48135ec735ed6b30fa9fa22261cf847a66269a0f3918f164954fcc0a5d7eec1e0d759831925f3ac6b546
+$(DL_FILE)_BLAKE2 = 44b4c2a2c498d351762cf2bcbd26460dbe663e08e3f2a1b6e73fefbcb4bbc4e77f4b0d47ad771ec7b3854a9b2ebdbf08162590d20bd080f276a8042148ca5f07
 
 install : $(TARGET)
 check : $(patsubst %,$(DIR_CHK)/%,$(objects))
@@ -81,39 +81,37 @@ $(subst %,%_BLAKE2,$(objects)) :
 $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
 	@$(PREBUILD)
 	@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar Jxf $(DIR_DL)/$(DL_FILE)
-
 	cd $(DIR_APP) && patch -Np1 -i $(DIR_SRC)/src/patches/libvirt/0001-Change-default-behavior-of-libvirt-guests.sh-for-IPF.patch
-
 	cd $(DIR_APP) && meson \
-		--prefix=/usr \
-		--localstatedir=/var \
-		--sysconfdir=/etc \
-		-D docs=disabled \
-		-D sasl=disabled \
-		-D driver_vbox=disabled \
-		-D driver_lxc=disabled \
-		-D driver_esx=disabled \
-		-D driver_vmware=disabled \
-		-D driver_openvz=disabled \
-		-D firewalld=disabled \
-		-D driver_network=disabled \
-		-D driver_interface=enabled \
-		-D wireshark_dissector=disabled \
-		-D nls=disabled \
-		-D tests=disabled \
-		-D qemu_user=nobody \
-		-D qemu_group=kvm \
-		-D storage_dir=enabled \
-		-D storage_fs=enabled \
-		-D storage_lvm=enabled \
-		-D storage_iscsi=disabled \
-		-D storage_scsi=disabled \
-		-D storage_mpath=disabled \
-		-D storage_disk=disabled \
-		-D storage_rbd=disabled \
-		-D storage_gluster=disabled \
-		-D storage_zfs=disabled \
-		builddir/
+				--prefix=/usr \
+				--localstatedir=/var \
+				--sysconfdir=/etc \
+				-D docs=disabled \
+				-D sasl=disabled \
+				-D driver_vbox=disabled \
+				-D driver_lxc=disabled \
+				-D driver_esx=disabled \
+				-D driver_vmware=disabled \
+				-D driver_openvz=disabled \
+				-D firewalld=disabled \
+				-D driver_network=disabled \
+				-D driver_interface=enabled \
+				-D wireshark_dissector=disabled \
+				-D nls=disabled \
+				-D tests=disabled \
+				-D qemu_user=nobody \
+				-D qemu_group=kvm \
+				-D storage_dir=enabled \
+				-D storage_fs=enabled \
+				-D storage_lvm=enabled \
+				-D storage_iscsi=disabled \
+				-D storage_scsi=disabled \
+				-D storage_mpath=disabled \
+				-D storage_disk=disabled \
+				-D storage_rbd=disabled \
+				-D storage_gluster=disabled \
+				-D storage_zfs=disabled \
+				builddir/
 	cd $(DIR_APP) && ninja -C builddir/ $(MAKETUNING) $(EXTRA_MAKE)
 	cd $(DIR_APP) && ninja -C builddir/ install
 
-- 
2.51.0

[PATCH] lzip: Update to version 1.25

[Adolf Belka]

- Update from version 1.24.1 to 1.25
- Update of rootfile not required
- Changelog
    1.25
	lzip now exits with error status 2 if any empty member is found in a
	 multimember file.
	lzip now exits with error status 2 if the first byte of the LZMA stream is
	 not 0.
	Options '--empty-error' and '--marking-error' have been removed.
	The chapter 'Syntax of command-line arguments' has been added to the manual.

Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
---
 lfs/lzip | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/lfs/lzip b/lfs/lzip
index 5d67be6f5..9ab7d6c8d 100644
--- a/lfs/lzip
+++ b/lfs/lzip
@@ -1,7 +1,7 @@
 ###############################################################################
 #                                                                             #
 # IPFire.org - A linux based firewall                                         #
-# Copyright (C) 2007-2024  IPFire Team  <info@ipfire.org>                     #
+# Copyright (C) 2007-2025  IPFire Team  <info@ipfire.org>                     #
 #                                                                             #
 # This program is free software: you can redistribute it and/or modify        #
 # it under the terms of the GNU General Public License as published by        #
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 1.24.1
+VER        = 1.25
 
 THISAPP    = lzip-$(VER)
 DL_FILE    = $(THISAPP).tar.gz
@@ -45,7 +45,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_BLAKE2 = b387577087af5596ea49af16c44e1dfc11f78cbcc1031fc480a4e7ef1a01f4d8fb35c03d8cbeb7f6feb51e427708b1ed0f9a160e80ff938555ea3cf34f28be7c
+$(DL_FILE)_BLAKE2 = c9215246cf792c0448d8b71c80ea822e34ecb43b580d3707570dffe31af327f42758fa07ce78d94a3b12ea0a1bb80b7868822cfffdafd467abab397723c5d6e2
 
 install : $(TARGET)
 
-- 
2.51.0

[PATCH] nfs: Update to version 2.8.4

[Adolf Belka]

- Update from version 2.8.3 to 2.8.4
- Update of rootfile not required
- Changelog is just a list of the commits. The details can be found in the changelog at
   https://sourceforge.net/projects/nfs/files/nfs-utils/2.8.4/

Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
---
 lfs/nfs | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/lfs/nfs b/lfs/nfs
index 5f3f8190e..f2bafe019 100644
--- a/lfs/nfs
+++ b/lfs/nfs
@@ -26,7 +26,7 @@ include Config
 
 SUMMARY    = Support Utilities for Kernel nfsd
 
-VER        = 2.8.3
+VER        = 2.8.4
 
 THISAPP    = nfs-utils-$(VER)
 DL_FILE    = $(THISAPP).tar.xz
@@ -34,7 +34,7 @@ DL_FROM    = $(URL_IPFIRE)
 DIR_APP    = $(DIR_SRC)/$(THISAPP)
 TARGET     = $(DIR_INFO)/$(THISAPP)
 PROG       = nfs
-PAK_VER    = 27
+PAK_VER    = 28
 
 DEPS       = rpcbind
 
@@ -48,7 +48,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_BLAKE2 = 70fbba171697e13e0050cb146ff7e30ce53937d37882e4f53be62ee2792e8afee451a74e81d3b739a4d3c76ef444c5602a7a6a2a1e1148829a50f27e5da18533
+$(DL_FILE)_BLAKE2 = 4c4319facaadb4a8cb1319efde1c6a1086dcbecb7c093c6edd64c23ae3ead85e6e6209e69279f47a73ef92410f59278f56f472ae0a28493936e2f2d681b40dea
 
 install : $(TARGET)
 
-- 
2.51.0