On Wed, 2018-07-04 at 01:09 +0200, Arne Fitzenreiter wrote:
> On some maschines the file i

The file was what?

> 
> I think this need more investigation.
> 
> 
> 
> > This was triggered by
> > https://git.ipfire.org/?p=ipfire-2.x.git;a=commitdiff;h=37458540bf727df09989
> > c10d640ad13c1a989029
> > 
> > I thought some cpu graphs on my "Duo Box" could be helpful and 
> > installed
> > 'cpufrequtils'.
> > 
> > But after adding the above commit to '/etc/init.d/collectd'
> > and restarting 'collectd' => no graphs appeared.
> > 
> > Reason:
> > The needed directory '/sys/devices/system/cpu/cpufreq/policy0/' doesn't
> > exist on my machine, so the 'LoadPlugin' was always commented and
> > deactivated.
> > 
> > Instead there are '/sys/devices/system/cpu/cpu0' and
> > '/sys/devices/system/cpu/cpu1'.
> > 
> > So I tested this the hard way.
> > 
> > After commenting the if-statement, everything is working, CPU graphs
> > appear and show reasonable values:
> > 
> > ...
> > # Enable cpufreq plugin if cpufreq found
> > #if [ ! -e  /sys/devices/system/cpu/cpufreq/policy0/*_cur_freq ]; then
> > #	sed -i -e "s|^LoadPlugin cpufreq|#LoadPlugin cpufreq|g" 
> > /etc/collectd.conf
> > #else
> > 	sed -i -e "s|^#LoadPlugin cpufreq|LoadPlugin cpufreq|g" 
> > /etc/collectd.conf
> > #fi
> > ...
> > 
> > Changed this to:
> > 
> > ...
> > if [ ! -e /sys/devices/system/cpu/cpu0/cpufreq/*_cur_freq ]; then
> > ..
> > 
> > But this gave me an error:
> > 
> > /etc/init.d/collectd: line 95: [:
> > /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: binary operator
> > expected
> > 
> > I changed the line to:
> > 
> > ...
> > if [ ! -e /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq ]; then
> > ...
> > 
> > And now it is running as expected.
> > 
> > Would this be ok for other machines?
> > Bug or feature - can anyone confirm?
> > 
> > Best,
> > Matthias
> > 
> > P.S.: I didn't forget the Telko - I was still at work. Too bad...