Re: [PATCH] lvm2: Update to version 2.03.21

[Michael Tremer <michael.tremer@ipfire.org>]

[-- Attachment #1: Type: text/plain, Size: 25145 bytes --]

Yes, please :)

> On 9 May 2023, at 09:25, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
> 
> So I should raise a patch that removes the lvmetad initscript and the references to it in the initscripts lfs and rootfile, correct?
> 
> Regards,
> Adolf.
> 
> On 09/05/2023 10:01, Michael Tremer wrote:
>> This is a service that caches any meta information about the LVM arrays.
>> At some point, we decided to run it by default, because it makes any block operations a little bit faster.
>> The change log states that it has been removed, so we simply need to drop this line. I do not think that this will cause any other changes for us.
>> -Michael
>>> On 9 May 2023, at 08:51, Arne Fitzenreiter <arne_f(a)ipfire.org> wrote:
>>> 
>>> This patch remove lvmetad but there is still an initskript that try to start it.
>>> I don't know what this does but it give an error at boot.
>>> 
>>> Arne
>>> 
>>> 
>>> Am 2023-05-02 19:53, schrieb Adolf Belka:
>>>> - Update from version 2.02.188 to 2.03.21
>>>> - Update of rootfile
>>>> - Changelog
>>>>    version 2.03.21 - 21st April 2023
>>>>  Fix activation of vdo-pool for with 0 length headers (converted pools).
>>>>  Avoid printing internal init messages when creation integration devices.
>>>>  Allow (write)cache over raid+integrity LV.
>>>>    version 2.03.20 - 21st March 2023
>>>>  Fix segfault if using -S|--select with log/report_command_log=1 setting.
>>>>  Configure now fails when requested lvmlockd dependencies are missing.
>>>>  Add some configure Gentoo enhancements for static builds.
>>>>    version 2.03.19 - 21st February 2023
>>>>  Configure supports --with-systemd-run executed from udev rules.
>>>>  Enhancement for build with MuslC systemd and non-bash system shells (dash).
>>>>  Do not reset SYSTEMD_READY variable in udev for PVs on MD and loop devices.
>>>>  Ensure udev is processing origin LV before its thick snapshots LVs.
>>>>  Fix and improve runtime memory size detection for VDO volumes.
>>>>    version 2.03.18 - 22nd December 2022
>>>>  Fix issues reported by coverity scan.
>>>>  Fix warning for thin pool overprovisioning on lvextend (2.03.17).
>>>>  Add support for writecache metadata_only and pause_writeback settings.
>>>>  Fix missing error messages in lvmdbusd.
>>>>    Version 2.03.17 - 10th November 2022
>>>>  Add new options (--fs, --fsmode) for FS handling when resizing LVs.
>>>>  Fix 'lvremove -S|--select LV' to not also remove its historical LV
>>>> right away.
>>>>  Fix lv_active field type to binary so --select and --binary applies properly.
>>>>  Switch to use mallinfo2 and use it only with glibc.
>>>>  Error out in lvm shell if using a cmd argument not supported in the shell.
>>>>  Fix lvm shell's lastlog command to report previous pre-command failures.
>>>>  Extend VDO and VDOPOOL without flushing and locking fs.
>>>>  Add --valuesonly option to lvmconfig to print only values without keys.
>>>>  Updates configure with recent autoconf tooling.
>>>>  Fix lvconvert --test --type vdo-pool execution.
>>>>  Add json_std output format for more JSON standard compliant version
>>>> of output.
>>>>  Fix vdo_slab_size_mb value for converted VDO volume.
>>>>  Fix many corner cases in device_id, including handling of S/N duplicates.
>>>>  Fix various issues in lvmdbusd.
>>>>    Version 2.03.16 - 18th May 2022
>>>>  Fix segfault when handling selection with historical LVs.
>>>>  Add support --vdosettings with lvcreate, lvconvert, lvchange.
>>>>  Filtering multipath devices respects blacklist setting from multipath
>>>>  configuration.
>>>>  lvmdevices support for removing by device id using --deviceidtype and
>>>>  --deldev.
>>>>  Display writecache block size with lvs -o writecache_block_size.
>>>>  Improve cachesettings description in man lvmcache.
>>>>  Fix lossing of delete message on thin-pool extension.
>>>>    Version 2.03.15 - 07th February 2022
>>>>  Remove service based autoactivation. global/event_activation = 0 is NOOP.
>>>>  Improve support for metadata profiles for --type writecache.
>>>>  Use cache or active DM device when available with new kernels.
>>>>  Introduce function to utilize UUIDs from DM_DEVICE_LIST.
>>>>  Increase some hash table size to better support large device sets.
>>>>    Version 2.03.14 - 20th October 2021
>>>>  Device scanning is skipping directories on different filesystems.
>>>>  Print info message with too many or too large archived files.
>>>>  Reduce metadata readings during scanning phase.
>>>>  Optimize computation of crc32 check sum with multiple PVs.
>>>>  Enhance recover path on cache creation failure.
>>>>  Filter out unsupported MQ/SMQ cache policy setting.
>>>>  Fix memleak in mpath filter.
>>>>  Support newer location for VDO statistics.
>>>>  Add support for VDO async-unsafe write policy.
>>>>  Improve lvm_import_vdo script.
>>>>  Support VDO LV with lvcreate -ky.
>>>>  Fix lvconvert for VDO LV bigger then 2T.
>>>>  Create VDO LVs automatically without zeroing.
>>>>  Rename vdoimport to lvm_import_vdo.
>>>>    Version 2.03.13 - 11th August 2021
>>>>  Changes in udev support:
>>>>  - obtain_device_list_from_udev defaults to 0.
>>>>  - see devices/external_device_info_source,
>>>>    devices/obtain_device_list_from_udev, and devices/multipath_wwids_file help
>>>>    in lvm.conf
>>>>  Fix devices file handling of loop with deleted backing file.
>>>>  Fix devices file handling of scsi_debug WWIDs.
>>>>  Fix many static analysis issues.
>>>>  Support --poolmetadataspare with vgsplit and vgmerge.
>>>>  Fix detection of active components of external origin volume.
>>>>  Add vdoimport tool to support conversion of VDO volumes.
>>>>  Support configurable allocation/vdo_pool_header_size.
>>>>  Fix handling of lvconvert --type vdo-pool --virtualsize.
>>>>  Simplified handling of archive() and backup() internal calls.
>>>>  Add 'idm' locking type for IDM lock manager.
>>>>  Fix load of kvdo target when it is not present in memory (2.03.12).
>>>>    Version 2.03.12 - 07th May 2021
>>>>  Allow attaching cache to thin data volume.
>>>>  Fix memleak when generating list of outdated pvs.
>>>>  Better hyphenation usage in man pages.
>>>>  Replace use of deprecated security_context_t with char*.
>>>>  Configure supports AIO_LIBS and AIO_CFLAGS.
>>>>  Improve build process for static builds.
>>>>  New --setautoactivation option to modify LV or VG auto activation.
>>>>  New metadata based autoactivation property for LVs and VGs.
>>>>  Improve signal handling with lvmpolld.
>>>>  Signal handler can interrupt command also for SIGTERM.
>>>>  Lvreduce --yes support.
>>>>  Add configure option --with/out-symvers for non-glibc builds.
>>>>  Report error when the filesystem is missing on fsadm resized volume.
>>>>  Handle better blockdev with --getsize64 support for fsadm.
>>>>  Do not include editline/history.h when using editline library.
>>>>  Support error and zero segtype for thin-pool data for testing.
>>>>  Support mixed extension for striped, error and zero segtypes.
>>>>  Support resize also for stacked virtual volumes.
>>>>  Skip dm-zero devices just like with dm-error target.
>>>>  Reduce ioctl() calls when checking target status.
>>>>  Merge polling does not fail, when LV is found to be already merged.
>>>>  Poll volumes with at least 100ms delays.
>>>>  Do not flush dm cache when cached LV is going to be removed.
>>>>  New lvmlockctl_kill_command configuration option.
>>>>  Support interruption while waiting on device close before deactivation.
>>>>  Flush thin-pool messages before removing more thin volumes.
>>>>  Improve hash function with less collisions and make it faster.
>>>>  Reduce ioctl count when deactivating volumes.
>>>>  Reduce number of metadata parsing.
>>>>  Enhance performance of lvremove and vgremove commands.
>>>>  Support interruption when taking archive and backup.
>>>>  Accelerate large lvremoves.
>>>>  Speedup search for cached device nodes.
>>>>  Speedup command initialization.
>>>>  Add devices file feature, off by default for now.
>>>>  Support extension of writecached volumes.
>>>>  Fix problem with unbound variable usage within fsadm.
>>>>  Fix IMSM MD RAID detection on 4k devices.
>>>>  Check for presence of VDO target before starting any conversion.
>>>>  Support metatadata profiles with volume VDO pool conversions.
>>>>  Support -Zn for conversion of already formated VDO pools.
>>>>  Avoid removing LVs on error path of lvconvert during creation volumes.
>>>>  Fix crashing lvdisplay when thin volume was waiting for merge.
>>>>  Support option --errorwhenfull when converting volume to thin-pool.
>>>>  Improve thin-performance profile support conversion to thin-pool.
>>>>  Add workaround to avoid read of internal 'converted' devices.
>>>>  Prohibit merging snapshot into the read-only thick snapshot origin.
>>>>  Restore support for flipping rw/r permissions for thin snapshot origin.
>>>>  Support resize of cached volumes.
>>>>  Disable autoactivation with global/event_activation=0.
>>>>  Check if lvcreate passes read_only_volume_list with tags and skips zeroing.
>>>>  Allocation prints better error when metadata cannot fit on a single PV.
>>>>  Pvmove can better resolve full thin-pool tree move.
>>>>  Limit pool metadata spare to 16GiB.
>>>>  Improves conversion and allocation of pool metadata.
>>>>  Support thin pool metadata 15.88GiB, adds 64MiB, thin_pool_crop_metadata=0.
>>>>  Enhance lvdisplay to report raid available/partial.
>>>>  Support online rename of VDO pools.
>>>>  Improve removal of pmspare when last pool is removed.
>>>>  Fix problem with wiping of converted LVs.
>>>>  Fix memleak in scanning  (2.03.11).
>>>>  Fix corner case allocation for thin-pools.
>>>>    Version 2.03.11 - 08th January 2021
>>>>  Fix pvck handling MDA at offset different from 4096.
>>>>  Partial or degraded activation of writecache is not allowed.
>>>>  Enhance error handling for fsadm and handle correct fsck result.
>>>>  Dmeventd lvm plugin ignores higher reserved_stack lvm.conf values.
>>>>  Support using BLKZEROOUT for clearing devices.
>>>>  Support interruption when wipping LVs.
>>>>  Support interruption for bcache waiting.
>>>>  Fix bcache when device has too many failing writes.
>>>>  Fix bcache waiting for IO completion with failing disks.
>>>>  Configure use own python path name order to prefer using python3.
>>>>  Add configure --enable-editline support as an alternative to readline.
>>>>  Enhance reporting and error handling when creating thin volumes.
>>>>  Enable vgsplit for VDO volumes.
>>>>  Lvextend of vdo pool volumes ensure at least 1 new VDO slab is added.
>>>>  Use revert_lv() on reload error path after vg_revert().
>>>>  Configure --with-integrity enabled.
>>>>  Restore lost signal blocking while VG lock is held.
>>>>  Improve estimation of needed extents when creating thin-pool.
>>>>  Use extra 1% when resizing thin-pool metadata LV with --use-policy.
>>>>  Enhance --use-policy percentage rounding.
>>>>  Configure --with-vdo and --with-writecache as internal segments.
>>>>  Improving VDO man page examples.
>>>>  Allow pvmove of writecache origin.
>>>>  Report integrity fields.
>>>>  Integrity volumes defaults to journal mode.
>>>>  Switch code base to use flexible array syntax.
>>>>  Fix 64bit math when calculation cachevol size.
>>>>  Preserve uint32_t for seqno handling.
>>>>  Switch from mmap to plain read when loading regular files.
>>>>  Update lvmvdo man page and better explain DISCARD usage.
>>>>    Version 2.03.10 - 09th August 2020
>>>>  Add writecache and integrity support to lvmdbusd.
>>>>  Generate unique cachevol name when default required from lvcreate.
>>>>  Converting RAID1 volume to one with same number of legs now succeeds with a
>>>>  warning.
>>>>  Fix conversion to raid from striped lagging type.
>>>>  Fix conversion to 'mirrored' mirror log with larger regionsize.
>>>>  Zero pool metadata on allocation (disable with allocation/zero_metadata=0).
>>>>  Failure in zeroing or wiping will fail command (bypass with -Zn, -Wn).
>>>>  Add lvcreate of new cache or writecache lv with single command.
>>>>  Fix running out of free buffers for async writing for larger writes.
>>>>  Add integrity with raid capability.
>>>>  Fix support for lvconvert --repair used by foreign apps (i.e. Docker).
>>>>    Version 2.03.09 - 26th March 2020
>>>>  Fix formatting of vdopool (vdo_slab_size_mb was smaller by 2 bits).
>>>>  Fix showing of a dm kernel error when uncaching a volume with cachevol.
>>>>    Version 2.03.08 - 11th February 2020
>>>>  Prevent problematic snapshots of writecache volumes.
>>>>  Add error handling for failing allocation in _reserve_area().
>>>>  Fix memleak in syncing of internal cache.
>>>>  Fix pvck dump_current_text memleak.
>>>>  Fix lvmlockd result code on error path for _query_lock_lv().
>>>>  Update pvck man page and help output.
>>>>  Reject invalid writecache high/low_watermark setting.
>>>>  Report writecache status.
>>>>  Accept more output lines from vdo_format.
>>>>  Prohibit reshaping of stacked raid LVs.
>>>>  Avoid running cache input arg validation when creating vdo pool.
>>>>  Prevent raid reshaping of stacked volumes.
>>>>  Added VDO lvmdbusd methods for enable/disable compression & dedupe.
>>>>  Added VDO lvmdbusd method for converting LV to VDO pool.
>>>>    Version 2.03.07 - 30th November 2019
>>>>  Subcommand in vgck for repairing headers and metadata.
>>>>  Ensure minimum required region size on striped RaidLV creation.
>>>>  Fix resize of thin-pool with data and metadata of different segtype.
>>>>  Improve mirror type leg splitting.
>>>>  Improve error path handling in daemons on shutdown.
>>>>  Fix activation order when removing merged snapshot.
>>>>  Experimental VDO support for lvmdbusd.
>>>>   Version 2.03.06 - 23rd October 2019
>>>>  Add _cpool suffix to cache-pool LV name when used by caching LV.
>>>>  No longer store extra UUID for cmeta and cdata cachevol layer.
>>>>  Enhance activation of cache devices with cachevols.
>>>>  Add _cvol in list of protected suffixes and start use it with DM UUID.
>>>>  Rename LV converted to cachevol to use _cvol suffix.
>>>>  Use normal LVs for wiping of cachevols.
>>>>  Reload cleanered cache DM only with cleaner policy.
>>>>  Fix cmd return when zeroing of cachevol fails.
>>>>  Extend lvs to show all VDO properties.
>>>>  Preserve VDO write policy with vdopool.
>>>>  Increase default vdo bio threads to 4.
>>>>  Continue report when cache_status fails.
>>>>  Add support for DM_DEVICE_GET_TARGET_VERSION into device_mapper.
>>>>  Fix cmirrord usage of header files from device_mapper subdir.
>>>>  Allow standalone activation of VDO pool just like for thin-pools.
>>>>  Activate thin-pool layered volume as 'read-only' device.
>>>>  Ignore crypto devices with UUID signature CRYPT-SUBDEV.
>>>>  Enhance validation for thin and cache pool conversion and swapping.
>>>>  Improve internal removal of cached devices.
>>>>  Synchronize with udev when dropping snapshot.
>>>>  Add missing device synchronization point before removing pvmove node.
>>>>  Correctly set read_ahead for LVs when pvmove is finished.
>>>>  Remove unsupported OPTIONS+="event_timeout" udev rule from 11-dm-lvm.rules.
>>>>  Prevent creating VGs with PVs with different logical block sizes.
>>>>  Fix metadata writes from corrupting with large physical block size.
>>>>    Version 2.03.05 - 15th June 2019
>>>>  Fix command definition for pvchange -a.
>>>>  Add vgck --updatemetadata command that will repair metadata problems.
>>>>  Improve VG reading to work if one good copy of metadata is found.
>>>>  Report/display/scan commands that read VGs will no longer write/repair.
>>>>  Move metadata repairs from VG reading to VG writing.
>>>>  Add config setting md_component_checks to control MD component checks.
>>>>  Add end of device MD component checks when dev has no udev info.
>>>>    Version 2.03.04 - 10th June 2019
>>>>  Remove unused_duplicate_devs from cmd causing segfault in dmeventd.
>>>>    Version 2.03.03 - 07th June 2019
>>>>  Report no_discard_passdown for cache LVs with lvs -o+kernel_discards.
>>>>  Add pvck --dump option to extract metadata.
>>>>  Fix signal delivery checking race in libdaemon (lvmetad).
>>>>  Add missing Before=shutdown.target to LVM2 services to fix shutdown ordering.
>>>>  Skip autoactivation for a PV when PV size does not match device size.
>>>>  Remove first-pvscan-initialization which should no longer be needed.
>>>>  Add remote refresh through lvmlockd/dlm for shared LVs after lvextend.
>>>>  Ignore foreign and shared PVs for pvscan online files.
>>>>  Add config setting to control fields in debug file and verbose output.
>>>>  Add command[pid] and timestamp to debug file and verbose output.
>>>>  Fix missing growth of _pmsmare volume when extending _tmeta volume.
>>>>  Automatically grow thin metadata, when thin data gets too big.
>>>>  Add synchronization with udev before removing cached devices.
>>>>  Add support for caching VDO LVs and VDOPOOL LVs.
>>>>  Add support for vgsplit with cached devices.
>>>>  Query mpath device only once per command for its state.
>>>>  Use device INFO instead of STATUS when checking for mpath device uuid.
>>>>  Change default io_memory_size from 4 to 8 MiB.
>>>>  Add config setting io_memory_size to set bcache size.
>>>>  Fix pvscan autoactivation for concurrent pvscans.
>>>>  Change scan_lvs default to 0 so LVs are not scanned for PVs.
>>>>  Thin-pool selects power-of-2 chunk size by default.
>>>>  Cache selects power-of-2 chunk size by default.
>>>>  Support reszing for VDOPoolLV and VDOLV.
>>>>  Improve -lXXX%VG modifier which improves cache segment estimation.
>>>>  Ensure migration_threshold for cache is at least 8 chunks.
>>>>  Restore missing man info lvcreate --zero for thin-pools.
>>>>  Drop misleadning comment for metadata minimum_io_size for VDO segment.
>>>>  Add device hints to reduce scanning.
>>>>  Introduce LVM_SUPPRESS_SYSLOG to suppress syslog usage by generator.
>>>>  Fix generator quering lvmconfig unpresent config option.
>>>>  Fix memleak on bcache error path code.
>>>>  Fix missing unlock on lvm2 dmeventd plugin error path initialization.
>>>>  Improve Makefile dependency tracking.
>>>>  Move VDO support towards V2 target (6.2) support.
>>>>    Version 2.03.02 - 18th December 2018
>>>>  Fix missing proper initialization of pv_list struct when adding pv.
>>>>  Fix (de)activation of RaidLVs with visible SubLVs.
>>>>  Prohibit mirrored 'mirror' log via lvcreate and lvconvert.
>>>>  Use sync io if async io_setup fails, or use_aio=0 is set in config.
>>>>  Fix more issues reported by coverity scan.
>>>>    Version 2.03.01 - 31st October 2018
>>>>    Version 2.03.00 - 10th October 2018
>>>>  Add hot fix to avoiding locking collision when monitoring thin-pools.
>>>>  Allow raid4 -> linear conversion request.
>>>>  Fix lvconvert striped/raid0/raid0_meta -> raid6 regression.
>>>>  Add 'lvm2-activation-generator:' prefix for kmsg messages logged by
>>>> generator.
>>>>  Add After=rbdmap.service to {lvm2-activation-net,blk-availability}.service.
>>>>  Reduce max concurrent aios to avoid EMFILE with many devices.
>>>>  Fix lvconvert conversion attempts to linear.
>>>>  Fix lvconvert raid0/raid0_meta -> striped regression.
>>>>  Fix lvconvert --splitmirror for mirror type (2.02.178).
>>>>  Do not pair cache policy and cache metadata format.
>>>>  lvconvert: reject conversions on raid1 LVs with split tracked SubLVs
>>>>  lvconvert: reject conversions on raid1 split tracked SubLVs
>>>>  Add basic creation support for VDO target.
>>>>  Never send any discard ioctl with test mode.
>>>>  Fix thin-pool alloc which needs same PV for data and metadata.
>>>>  Extend list of non-memlocked areas with newly linked libs.
>>>>  Enhance vgcfgrestore to check for active LVs in restored VG.
>>>>  Configure supports --disable-silent-rules for verbose builds.
>>>>  Fix unmonitoring of merging snapshots.
>>>>  Cache can uses metadata format 2 with cleaner policy.
>>>>  Fix check if resized PV can also fit metadata area.
>>>>  Avoid showing internal error in lvs output or pvmoved LVs.
>>>>  Remove clvmd
>>>>  Remove lvmlib (api)
>>>>  Remove lvmetad
>>>>  Use versionsort to fix archive file expiry beyond 100000 files.
>>>> Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
>>>> ---
>>>> config/rootfiles/common/lvm2 | 16 +++++++++++-----
>>>> lfs/lvm2                     |  6 +++---
>>>> 2 files changed, 14 insertions(+), 8 deletions(-)
>>>> diff --git a/config/rootfiles/common/lvm2 b/config/rootfiles/common/lvm2
>>>> index 258f3201f..bd1329e54 100644
>>>> --- a/config/rootfiles/common/lvm2
>>>> +++ b/config/rootfiles/common/lvm2
>>>> @@ -9,15 +9,17 @@ etc/lvm/lvm.conf
>>>> #etc/lvm/profile/metadata_profile_template.profile
>>>> #etc/lvm/profile/thin-generic.profile
>>>> #etc/lvm/profile/thin-performance.profile
>>>> +#etc/lvm/profile/vdo-small.profile
>>>> lib/udev/rules.d/10-dm.rules
>>>> lib/udev/rules.d/11-dm-lvm.rules
>>>> lib/udev/rules.d/13-dm-disk.rules
>>>> -lib/udev/rules.d/69-dm-lvm-metad.rules
>>>> +lib/udev/rules.d/69-dm-lvm.rules
>>>> lib/udev/rules.d/95-dm-notify.rules
>>>> #usr/include/libdevmapper.h
>>>> #usr/lib/libdevmapper.so
>>>> usr/lib/libdevmapper.so.1.02
>>>> #usr/lib/pkgconfig/devmapper.pc
>>>> +#usr/libexec/lvresize_fs_helper
>>>> usr/sbin/blkdeactivate
>>>> usr/sbin/dmsetup
>>>> usr/sbin/dmstats
>>>> @@ -28,11 +30,11 @@ usr/sbin/lvcreate
>>>> usr/sbin/lvdisplay
>>>> usr/sbin/lvextend
>>>> usr/sbin/lvm
>>>> -usr/sbin/lvmconf
>>>> +usr/sbin/lvm_import_vdo
>>>> usr/sbin/lvmconfig
>>>> +usr/sbin/lvmdevices
>>>> usr/sbin/lvmdiskscan
>>>> usr/sbin/lvmdump
>>>> -usr/sbin/lvmetad
>>>> usr/sbin/lvmsadc
>>>> usr/sbin/lvmsar
>>>> usr/sbin/lvreduce
>>>> @@ -61,6 +63,7 @@ usr/sbin/vgexport
>>>> usr/sbin/vgextend
>>>> usr/sbin/vgimport
>>>> usr/sbin/vgimportclone
>>>> +usr/sbin/vgimportdevices
>>>> usr/sbin/vgmerge
>>>> usr/sbin/vgmknodes
>>>> usr/sbin/vgreduce
>>>> @@ -70,11 +73,13 @@ usr/sbin/vgs
>>>> usr/sbin/vgscan
>>>> usr/sbin/vgsplit
>>>> #usr/share/man/man5/lvm.conf.5
>>>> +#usr/share/man/man7/lvmautoactivation.7
>>>> #usr/share/man/man7/lvmcache.7
>>>> #usr/share/man/man7/lvmraid.7
>>>> #usr/share/man/man7/lvmreport.7
>>>> #usr/share/man/man7/lvmsystemid.7
>>>> #usr/share/man/man7/lvmthin.7
>>>> +#usr/share/man/man7/lvmvdo.7
>>>> #usr/share/man/man8/blkdeactivate.8
>>>> #usr/share/man/man8/dmsetup.8
>>>> #usr/share/man/man8/dmstats.8
>>>> @@ -89,11 +94,11 @@ usr/sbin/vgsplit
>>>> #usr/share/man/man8/lvm-fullreport.8
>>>> #usr/share/man/man8/lvm-lvpoll.8
>>>> #usr/share/man/man8/lvm.8
>>>> -#usr/share/man/man8/lvmconf.8
>>>> +#usr/share/man/man8/lvm_import_vdo.8
>>>> #usr/share/man/man8/lvmconfig.8
>>>> +#usr/share/man/man8/lvmdevices.8
>>>> #usr/share/man/man8/lvmdiskscan.8
>>>> #usr/share/man/man8/lvmdump.8
>>>> -#usr/share/man/man8/lvmetad.8
>>>> #usr/share/man/man8/lvmsadc.8
>>>> #usr/share/man/man8/lvmsar.8
>>>> #usr/share/man/man8/lvreduce.8
>>>> @@ -122,6 +127,7 @@ usr/sbin/vgsplit
>>>> #usr/share/man/man8/vgextend.8
>>>> #usr/share/man/man8/vgimport.8
>>>> #usr/share/man/man8/vgimportclone.8
>>>> +#usr/share/man/man8/vgimportdevices.8
>>>> #usr/share/man/man8/vgmerge.8
>>>> #usr/share/man/man8/vgmknodes.8
>>>> #usr/share/man/man8/vgreduce.8
>>>> diff --git a/lfs/lvm2 b/lfs/lvm2
>>>> index 7e327a021..5b39f05f5 100644
>>>> --- a/lfs/lvm2
>>>> +++ b/lfs/lvm2
>>>> @@ -1,7 +1,7 @@
>>>> ###############################################################################
>>>> #                                                                             #
>>>> # IPFire.org - A linux based firewall                                         #
>>>> -# Copyright (C) 2007-2018  IPFire Team  <info(a)ipfire.org>                     #
>>>> +# Copyright (C) 2007-2023  IPFire Team  <info(a)ipfire.org>                     #
>>>> #                                                                             #
>>>> # This program is free software: you can redistribute it and/or modify        #
>>>> # it under the terms of the GNU General Public License as published by        #
>>>> @@ -24,7 +24,7 @@
>>>> include Config
>>>> -VER        = 2.02.188
>>>> +VER        = 2.03.21
>>>> THISAPP    = LVM2.$(VER)
>>>> DL_FILE    = $(THISAPP).tgz
>>>> @@ -40,7 +40,7 @@ objects = $(DL_FILE)
>>>> $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>>>> -$(DL_FILE)_BLAKE2 =
>>>> bed90c8454cd4b20fdeec6dcbf5a9f97c9310671aea3b2252f8069cfa439fcb050f5ad95f928a7125a1734a4dc5ac985da99a4a570538e377a7205191a505476
>>>> +$(DL_FILE)_BLAKE2 =
>>>> 529bc01b3d1ba6207c9ddc95309b39e6293fcd0286334240b9fdc076da0b7bc7e026338ec0243564ec153f2fb5009014149c3f8e0db0cd47a29418af62068728
>>>> install : $(TARGET)
> 
> -- 
> Sent from my laptop