This patch is lacking the changes to the root files.

I will take care of this.

-Michael

> On 18 May 2021, at 20:58, Peter Müller <peter.mueller(a)ipfire.org> wrote:
> 
> This patch requires
> https://patchwork.ipfire.org/project/ipfire/list/?series=2059 to be
> applied in the first place.
> 
> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
> ---
> config/miniupnpd/miniupnpd.conf               | 50 -------------------
> .../networking/red.down/10-miniupnpd          |  6 ---
> .../networking/red.up/10-miniupnpd            |  6 ---
> 3 files changed, 62 deletions(-)
> delete mode 100644 config/miniupnpd/miniupnpd.conf
> delete mode 100644 src/initscripts/networking/red.down/10-miniupnpd
> delete mode 100644 src/initscripts/networking/red.up/10-miniupnpd
> 
> diff --git a/config/miniupnpd/miniupnpd.conf b/config/miniupnpd/miniupnpd.conf
> deleted file mode 100644
> index 582758192..000000000
> --- a/config/miniupnpd/miniupnpd.conf
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -
> -# LAN network interfaces IPs / networks
> -# there can be multiple listening ips for SSDP traffic.
> -# should be under the form nnn.nnn.nnn.nnn/nn
> -listening_ip=green0
> -#listening_ip=green1
> -
> -# HTTP is available on all interfaces
> -# port for HTTP (descriptions and SOAP) traffic. set 0 for autoselect.
> -port=0
> -
> -# chain names for netfilter (not used for pf or ipf).
> -upnp_forward_chain=UPNPFW
> -upnp_nat_chain=UPNPFW
> -
> -# bitrates reported by daemon in bits per second
> -bitrate_up=1000000
> -bitrate_down=10000000
> -
> -# "secure" mode : when enabled, UPnP client are allowed to add mappings only
> -# to their IP.
> -secure_mode=yes
> -
> -# report system uptime instead of daemon uptime
> -system_uptime=yes
> -
> -# notify interval in seconds. default is 30 seconds.
> -notify_interval=60
> -
> -# unused rules cleaning.
> -# never remove any rule before this threshold for the number
> -# of redirections is exceeded. default to 20
> -#clean_ruleset_threshold=10
> -# clean process work interval in seconds. default to 0 (disabled).
> -# a 600 seconds (10 minutes) interval makes sense
> -clean_ruleset_interval=600
> -
> -# serial and model number the daemon will report to clients
> -# in its XML description
> -serial=12345678
> -model_number=1
> -
> -# UPnP permission rules
> -# (allow|deny) (external port range) ip/mask (internal port range)
> -# A port range is <min port>-<max port> or <port> if there is only
> -# one port in the range.
> -# ip/mask format must be nn.nn.nn.nn/nn
> -# it is advised to only allow redirection of port above 1024
> -# and to finish the rule set with "deny 0-65535 0.0.0.0/0 0-65535"
> -allow 0-65535 0.0.0.0/0 0-65535
> diff --git a/src/initscripts/networking/red.down/10-miniupnpd b/src/initscripts/networking/red.down/10-miniupnpd
> deleted file mode 100644
> index eaf2239e9..000000000
> --- a/src/initscripts/networking/red.down/10-miniupnpd
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -#!/bin/bash
> -
> -[ -x /etc/init.d/miniupnpd ] && \
> -	/etc/init.d/miniupnpd stop &>/dev/null
> -
> -exit 0
> diff --git a/src/initscripts/networking/red.up/10-miniupnpd b/src/initscripts/networking/red.up/10-miniupnpd
> deleted file mode 100644
> index 54431331b..000000000
> --- a/src/initscripts/networking/red.up/10-miniupnpd
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -#!/bin/bash
> -
> -[ -x /etc/init.d/miniupnpd ] && \
> -	/etc/init.d/miniupnpd start &>/dev/null
> -
> -exit 0
> -- 
> 2.26.2