Hello Jon,

Currently master is using a different toolchain than next.

Is that the missing piece in the puzzle?

-Michael

> On 15 Feb 2023, at 22:10, jon <jon.murphy(a)ipfire.org> wrote:
> 
> I just did:
> 
> git clone git://git.ipfire.org/ipfire-2.x.git
> sudo ./make.sh downloadsrc
> sudo ./make.sh gettoolchain
> sudo ./make.sh build
> 
> I did this build just to make sure things worked (and all was OK).
> 
> But, after the first build I still have the old toolchains.
> 
> jon(a)deb11HPZ:~/develoment/ipfire-2.x$ ll cache/toolchains
> total 97872
> drwxr-xr-x 2 root root      4096 2023-02-14 15:24 .
> drwxr-xr-x 3 root root     32768 2023-02-15 15:00 ..
> -rw-r--r-- 1 root root       193 2022-08-11 04:14 ipfire-2.27-toolchain-20220808-x86_64.b2
> -rw-r--r-- 1 root root 100174269 2022-08-11 04:14 ipfire-2.27-toolchain-20220808-x86_64.tar.zst
> 
> 
> Then I did a second `sudo ./make.sh gettoolchain` and now I see:
> 
> jon(a)deb11HPZ:~/develoment/ipfire-2.x$ ll cache/toolchains
> total 192648
> drwxr-xr-x 2 root root      4096 2023-02-15 15:05 .
> drwxr-xr-x 3 root root     32768 2023-02-15 15:00 ..
> -rw-r--r-- 1 root root       193 2022-08-11 04:14 ipfire-2.27-toolchain-20220808-x86_64.b2
> -rw-r--r-- 1 root root 100174269 2022-08-11 04:14 ipfire-2.27-toolchain-20220808-x86_64.tar.zst
> -rw-r--r-- 1 root root       193 2023-02-10 09:07 ipfire-2.27-toolchain-20230210-x86_64.b2
> -rw-r--r-- 1 root root  97043243 2023-02-10 09:07 ipfire-2.27-toolchain-20230210-x86_64.tar.zst
> 
> 
> It doesn’t quite make sense to me!
> 
> I’m going to make my changes and try a second build.
> 
> 
> 
>> On Feb 15, 2023, at 11:04 AM, jon <jon.murphy(a)ipfire.org> wrote:
>> 
>> sorry I should have been more specific.  I did all of those steps.
>> 
>> I started over again and I’ll see if the same happens.
>> 
>> Jon
>> 
>> 
>>> On Feb 15, 2023, at 2:36 AM, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>>> 
>>> Hi Jon,
>>> 
>>> On 14/02/2023 22:43, jon wrote:
>>>> All,
>>>> 
>>>> I started with a new `git clone git://git.ipfire.org/ipfire-2.x.git`.  And I keep getting toolchain errors during the make build.
>>>> 
>>>> I seem to remember a recent change to the toolchain.  And the errors are related to a newer date toolchain build that I do not have.
>>> A new toolchain was released. You need to run ./make gettoolchain
>>> 
>>> As standard when I do a new build I run
>>> ./make gettoolchain
>>> ./make downloadsrc
>>> ./make clean
>>> ./make build
>>> 
>>> The gettoolchain most of the time comes back with " latest toolchain already downloaded" but occasionally, like a couple of days ago, it downloaded and checked the b2 sum of a new toolchain.
>>> 
>>> I think for a new clone you definitely need to do the whole set of commands.
>>> 
>>> Regards,
>>> 
>>> Adolf.
>>>> This is what I see:
>>>> ```
>>>> Packaged toolchain compilation
>>>> b2sum: /home/Jon/development/ipfire-2.x/cache/toolchains/ipfire-2.27-toolchain-20230210-x86_64.tar.zst: No such file or directory
>>>> cat: /home/jon/development/ipfire-2.x/cache/toolchains/ipfire-2.27-toolchain-20230210-x86_64.b2: No such file or directory
>>>> ./make.sh: line 1827: /home/jon/development/ipfire-2.x/cache/toolchains/ipfire-2.27-toolchain-20230210-x86_64.tar.zst: No such file or directory
>>>> tar: This does not look like a tar archive
>>>> tar: Exiting with failure status due to previous errors
>>>> Checking for necessary space on disk                                                    [ DONE ]
>>>> chroot: failed to run command 'env': No such file or directory
>>>> Building LFS
>>>> ```
>>>> 
>>>> The toolchain files I have are
>>>> ```
>>>> ipfire-2.27-toolchain-20220808-x86_64.b2
>>>> ipfire-2.27-toolchain-20220808-x86_64.tar.zst
>>>> ```
>>>> 
>>>> Does this make sense?
>>>> Jon
>>>> 
>>>> 
>>>> 
>>>> Jon Murphy
>>>> jon.murphy(a)ipfire.org
>>>> 
>>>> 
>>>> 
>>> 
>>> -- 
>>> Sent from my laptop
>> 
>> 
>