Hello Arne,
hello Michael,
hello *,

thank you for spotting this. While I cannot explain to myself why I did not realise
this during my tests, I agree it makes sense to revert that part of the spoofed/martian
firewall changes.

Apologies for the trouble caused.

Reviewed-by: Peter Müller <peter.mueller(a)ipfire.org>

Thanks, and best regards,
Peter Müller


> If the firewall is talking to itself using one of its private IP
> addresses (e.g. the primary green interface IP address), it will use the
> loopback interface.
> 
> This is due to the local routing table which will be looked up first:
> 
>   [root(a)ipfire ~]# ip rule
>   0:      from all lookup local
>   128:    from all lookup 220
>   220:    from all lookup 220
>   32765:  from all lookup static
>   32766:  from all lookup main
>   32767:  from all lookup default
> 
> It contains:
> 
>   [root(a)ipfire ~]# ip route show table local
>   local 8x.1x.1x.1x dev ppp0 proto kernel scope host src 8x.1x.1x.1x
>   local 127.0.0.0/8 dev lo proto kernel scope host src 127.0.0.1
>   local 127.0.0.1 dev lo proto kernel scope host src 127.0.0.1
>   broadcast 127.255.255.255 dev lo proto kernel scope link src 127.0.0.1
>   local 192.168.x.1 dev green0 proto kernel scope host src 192.168.x.1
>   broadcast 192.168.x.255 dev green0 proto kernel scope link src 192.168.x.1
> 
> Any lookup for the green IP address will show this:
> 
>   local 192.168.x.1 dev lo table local src 192.168.x.1 uid 0
>       cache <local>
> 
> A test ping shows this in tcpdump:
> 
>   [root(a)ipfire ~]# tcpdump -i any icmp -nn
>   tcpdump: data link type LINUX_SLL2
>   tcpdump: verbose output suppressed, use -v[v]... for full protocol decode
>   listening on any, link-type LINUX_SLL2 (Linux cooked v2), snapshot length 262144 bytes
>   17:24:22.864293 lo    In  IP 127.0.0.1 > 127.0.0.1: ICMP echo request, id 10420, seq 1, length 64
>   17:24:22.864422 lo    In  IP 127.0.0.1 > 127.0.0.1: ICMP echo reply, id 10420, seq 1, length 64
>   17:24:29.162021 lo    In  IP 192.168.x.1 > 192.168.x.1: ICMP echo request, id 1555, seq 1, length 64
>   17:24:29.162201 lo    In  IP 192.168.x.1 > 192.168.x.1: ICMP echo reply, id 1555, seq 1, length 64
> 
> For this reason, we will have to accept any source and destination IP
> address on the loopback interface, which is what this patch does.
> 
> We can however, continue to check whether we received any packets with
> the loopback address on any other interface.
> 
> This regression was introduced in commit a36cd34e.
> 
> Fixes: #12776 - New spoofed or martian filter block
> Signed-off-by: Arne Fitzenreiter <arne_f(a)ipfire.org>
> Signed-off-by: Michael Tremer <michael.tremer(a)ipfire.org>
> ---
>  src/initscripts/system/firewall | 10 +++-------
>  1 file changed, 3 insertions(+), 7 deletions(-)
> 
> diff --git a/src/initscripts/system/firewall b/src/initscripts/system/firewall
> index 48653ff57..fc355cd5d 100644
> --- a/src/initscripts/system/firewall
> +++ b/src/initscripts/system/firewall
> @@ -200,14 +200,10 @@ iptables_init() {
>  	iptables -A INPUT -j ICMPINPUT
>  	iptables -A ICMPINPUT -p icmp --icmp-type 8 -j ACCEPT
>  
> -	# Accept everything on loopback if source/destination is loopback space...
> +	# Accept everything on loopback
>  	iptables -N LOOPBACK
> -	iptables -A LOOPBACK -i lo -s 127.0.0.0/8 -j ACCEPT
> -	iptables -A LOOPBACK -o lo -d 127.0.0.0/8 -j ACCEPT
> -
> -	# ... and drop everything else on the loopback interface, since no other traffic should appear there
> -	iptables -A LOOPBACK -i lo -j SPOOFED_MARTIAN
> -	iptables -A LOOPBACK -o lo -j SPOOFED_MARTIAN
> +	iptables -A LOOPBACK -i lo -j ACCEPT
> +	iptables -A LOOPBACK -o lo -j ACCEPT
>  
>  	# Filter all packets with loopback addresses on non-loopback interfaces (spoofed)
>  	iptables -A LOOPBACK -s 127.0.0.0/8 -j SPOOFED_MARTIAN