Hi All,

I should have also added to the end of this message that patches 1 and 3 were applied, as far as I could tell as per the patch.

I then installed the built iso into a vm machine and ran the x509 install and got the root certificate and no host certificate with the standard openssl error message.

In the httpd/error_log file it had the following message

Email Address []:Error checking request extension section server

Regards,

Adolf.

On 05/06/2024 13:26, Adolf Belka wrote:
> Hi Michael,
>
> Here is my feedback on these three patches and the issues I found when I tried to use them.
>
> I had to manually apply them so there is also the possibility that I made a typo somewhere.
>
> On 18/04/2024 23:36, Michael Tremer wrote:
>> We should not have any configuration files that we share in this place,
>> therefore this patch is moving it into /usr/share/openvpn where we
>> should be able to update it without any issues.
>>
>> Signed-off-by: Michael Tremer <michael.tremer(a)ipfire.org>
>> ---
>>   config/rootfiles/common/openvpn | 2 +-
>>   html/cgi-bin/ovpnmain.cgi       | 2 +-
>>   lfs/openvpn                     | 6 ++++++
>>   3 files changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/config/rootfiles/common/openvpn b/config/rootfiles/common/openvpn
>> index d9848a579..c0d49bfad 100644
>> --- a/config/rootfiles/common/openvpn
>> +++ b/config/rootfiles/common/openvpn
> These changes were no problem.
>> @@ -25,6 +25,7 @@ usr/sbin/openvpn-authenticator
>>   #usr/share/doc/openvpn/openvpn.8.html
>>   #usr/share/man/man5/openvpn-examples.5
>>   #usr/share/man/man8/openvpn.8
>> +usr/share/openvpn/openssl.cnf
>>   var/ipfire/ovpn/ca
>>   var/ipfire/ovpn/caconfig
>>   var/ipfire/ovpn/ccd
>> @@ -35,7 +36,6 @@ var/ipfire/ovpn/certs/serial
>>   var/ipfire/ovpn/crls
>>   var/ipfire/ovpn/n2nconf
>>   #var/ipfire/ovpn/openssl
>> -var/ipfire/ovpn/openssl/ovpn.cnf
>>   var/ipfire/ovpn/openvpn-authenticator
>>   var/ipfire/ovpn/ovpn-leases.db
>>   var/ipfire/ovpn/ovpnconfig
>> diff --git a/html/cgi-bin/ovpnmain.cgi b/html/cgi-bin/ovpnmain.cgi
>> index 9b8ff5aa5..ed80fef7d 100755
>> --- a/html/cgi-bin/ovpnmain.cgi
>> +++ b/html/cgi-bin/ovpnmain.cgi
> Also this change no problem.
>> @@ -54,7 +54,7 @@ my %mainsettings = ();
>> &General::readhash("/srv/web/ipfire/html/themes/ipfire/include/colors.txt", \%color);
>>     # Use a custom OpenSSL configuration file for all operations
>> -$ENV["OPENSSL_CONF"] = "${General::swroot}/ovpn/ca/cacert.pem";
>> +$ENV["OPENSSL_CONF"] = "/usr/share/openvpn/openssl.cnf";
>>     ###
>>   ### Initialize variables
>> diff --git a/lfs/openvpn b/lfs/openvpn
>> index b71b4ccc9..0704aa438 100644
>> --- a/lfs/openvpn
>> +++ b/lfs/openvpn
> This change refused to build as it said the directory removal was for a non empty directory. When I looked at it I believe that it needed to be different.
>> @@ -101,6 +101,12 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>>       chown root:root /etc/fcron.daily/openvpn-crl-updater
>>       chmod 750 /etc/fcron.daily/openvpn-crl-updater
>>   +    # Move the OpenSSL configuration file out of /var/ipfire
>> +    mkdir -pv /usr/share/openvpn
>> +    mv -v /var/ipfire/ovpn/openssl/ovpn.cnf \
>> +        /usr/share/openvpn/
>> +    rmdir -v /usr/share/openvpn
>> +
>
> The above lines I changed to
>
> +    # Move the OpenSSL configuration file out of /var/ipfire
> +    mkdir -pv /usr/share/openvpn
> +    mv -v /var/ipfire/ovpn/openssl/ovpn.cnf \
> +        /usr/share/openvpn/openssl.cnf
> +    rmdir -v /var/ipfire/ovpn/openssl/
> +
> with my changes in the last two lines.
> When I changed just the last line to start with then the openvpn lfs built but then later on in the cdrom stage it complained about openssl.cnf not being found, hence I also then added the change to the one before last line.
>
> Regards,
> Adolf.
>
>>       # Install authenticator
>>       install -v -m 755 $(DIR_SRC)/config/ovpn/openvpn-authenticator \
>>           /usr/sbin/openvpn-authenticator