Re: [PATCH] Core Update 168: Hard-code kernel version to 5.15.35

[Jon Murphy <jcmurphy26@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 2262 bytes --]

Peter,

How do I tell when this makes it into the CU 168 testing build?  (The one that Pakfire will pickup & install)

I will can test this on the Raspberry Pi RPi4B and on the FriendlyArm R2S


Jon


> On May 12, 2022, at 12:41 PM, Peter Müller <peter.mueller(a)ipfire.org> wrote:
> 
> On systems that have previously running on testing, kernel 5.15.32 might
> still be installed. dracut being called with ${KVER} will then build an
> inital ramdisk for the wrong kernel, as 5.15.32 might still be running,
> albeit 5.15.35 has been installed due to the Pakfire procedure when
> upgrading on testing.
> 
> Due to lack of hardware, this patch is untested on ARM.
> 
> https://lists.ipfire.org/pipermail/development/2022-May/013433.html
> 
> Reported-by: Stefan Schantl <stefan.schantl(a)ipfire.org>
> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
> ---
> config/rootfiles/core/168/update.sh | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/config/rootfiles/core/168/update.sh b/config/rootfiles/core/168/update.sh
> index d21f648dd..7cc8800b2 100644
> --- a/config/rootfiles/core/168/update.sh
> +++ b/config/rootfiles/core/168/update.sh
> @@ -107,14 +107,14 @@ chmod -v 750 /etc/sudoers.d
> chmod -v 640 /etc/sudoers.d/*
> 
> # Rebuild initial ramdisk to apply microcode updates
> -dracut --regenerate-all --force
> +dracut --kver="5.15.35-ipfire" --regenerate-all --force
> case "$(uname -m)" in
>         armv*)
> -                mkimage -A arm -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
> -                rm /boot/initramfs-${KVER}-ipfire.img
> +                mkimage -A arm -T ramdisk -C lzma -d /boot/initramfs-5.15.35-ipfire.img /boot/uInit-5.15.35-ipfire
> +                rm /boot/initramfs-5.15.35-ipfire.img
>                 ;;
>         aarch64)
> -                mkimage -A arm64 -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
> +                mkimage -A arm64 -T ramdisk -C lzma -d /boot/initramfs-5.15.35-ipfire.img /boot/uInit-5.15.35-ipfire
>                 # dont remove initramfs because grub need this to boot.
>                 ;;
> esac
> -- 
> 2.35.3