From: ummeegge <ummeegge@ipfire.org>
To: development@lists.ipfire.org
Subject: Re: [PATCH] keepalived: Update to version 2.0.20 .
Date: Sun, 15 Mar 2020 16:47:48 +0100 [thread overview]
Message-ID: <3dbe5561b47280bf90924ae8e872c9f1c52d362a.camel@ipfire.org> (raw)
In-Reply-To: <CB275E79-D9E8-42E7-B460-8EA6B008969B@ipfire.org>
[-- Attachment #1: Type: text/plain, Size: 5119 bytes --]
Hi Michael,
Am Sonntag, den 15.03.2020, 09:23 +0000 schrieb Michael Tremer:
> Hi, this looks good.
>
> But should we not ship /etc/sysconfig/keepalived, too?
since it is also commented in the old version ileft it out but i can
include it no problem. This is the content:
# Options for keepalived. See `keepalived --help' output and
keepalived(8) and
# keepalived.conf(5) man pages for a list of all options. Here are the
most
# common ones :
#
# --vrrp -P Only run with VRRP subsystem.
# --check -C Only run with Health-checker subsystem.
# --dont-release-vrrp -V Dont remove VRRP VIPs & VROUTEs on daemon
stop.
# --dont-release-ipvs -I Dont remove IPVS topology on daemon stop.
# --dump-conf -d Dump the configuration data.
# --log-detail -D Detailed log messages.
# --log-facility -S 0-7 Set local syslog facility
(default=LOG_DAEMON)
#
KEEPALIVED_OPTIONS="-D"
do you think this makes sens ?
Best,
Erik
>
> -Michael
>
> > On 10 Mar 2020, at 16:10, Erik Kapfer <erik.kapfer(a)ipfire.org>
> > wrote:
> >
> > Since this update is a mayor version update, it brings a lot of
> > changes.
> > The changelog can be found in here -->
> > http://www.keepalived.com/changelog.html .
> >
> > Signed-off-by: Erik Kapfer <erik.kapfer(a)ipfire.org>
> > ---
> > config/rootfiles/packages/keepalived | 9 ++++++---
> > lfs/keepalived | 10 +++++-----
> > 2 files changed, 11 insertions(+), 8 deletions(-)
> >
> > diff --git a/config/rootfiles/packages/keepalived
> > b/config/rootfiles/packages/keepalived
> > index fbf5702cb..ff4a7b797 100644
> > --- a/config/rootfiles/packages/keepalived
> > +++ b/config/rootfiles/packages/keepalived
> > @@ -7,6 +7,7 @@ etc/keepalived/samples
> > #etc/keepalived/samples/keepalived.conf.IPv6
> > #etc/keepalived/samples/keepalived.conf.SMTP_CHECK
> > #etc/keepalived/samples/keepalived.conf.SSL_GET
> > +#etc/keepalived/samples/keepalived.conf.conditional_conf
> > #etc/keepalived/samples/keepalived.conf.fwmark
> > #etc/keepalived/samples/keepalived.conf.inhibit
> > #etc/keepalived/samples/keepalived.conf.misc_check
> > @@ -21,18 +22,20 @@ etc/keepalived/samples
> > #etc/keepalived/samples/keepalived.conf.vrrp.localcheck
> > #etc/keepalived/samples/keepalived.conf.vrrp.lvs_syncd
> > #etc/keepalived/samples/keepalived.conf.vrrp.routes
> > +#etc/keepalived/samples/keepalived.conf.vrrp.rules
> > #etc/keepalived/samples/keepalived.conf.vrrp.scripts
> > #etc/keepalived/samples/keepalived.conf.vrrp.static_ipaddress
> > #etc/keepalived/samples/keepalived.conf.vrrp.sync
> > #etc/keepalived/samples/root.pem
> > #etc/keepalived/samples/sample.misccheck.smbcheck.sh
> > -#etc/sysconfig/keepalived
> > +#etc/keepalived/samples/sample_notify_fifo.sh
> > etc/rc.d/init.d/keepalived
> > +#etc/sysconfig/keepalived
> > usr/bin/genhash
> > usr/sbin/keepalived
> > +#usr/share/doc/keepalived
> > +#usr/share/doc/keepalived/README
> > #usr/share/man/man1/genhash.1
> > #usr/share/man/man5/keepalived.conf.5
> > #usr/share/man/man8/keepalived.8
> > -#usr/share/snmp/mibs/KEEPALIVED-MIB
> > -#usr/share/snmp/mibs/VRRP-MIB
> > var/ipfire/backup/addons/includes/keepalived
> > diff --git a/lfs/keepalived b/lfs/keepalived
> > index c18625f38..905f1d070 100644
> > --- a/lfs/keepalived
> > +++ b/lfs/keepalived
> > @@ -1,7 +1,7 @@
> > ###################################################################
> > ############
> > #
> > #
> > # IPFire.org - A linux based
> > firewall #
> > -# Copyright (C) 2007-2018 IPFire Team <info(a)ipfire.org>
> > #
> > +# Copyright (C) 2007-2020 IPFire Team <info(a)ipfire.org>
> > #
> > #
> > #
> > # This program is free software: you can redistribute it and/or
> > modify #
> > # it under the terms of the GNU General Public License as published
> > by #
> > @@ -24,7 +24,7 @@
> >
> > include Config
> >
> > -VER = 1.2.17
> > +VER = 2.0.20
> >
> > THISAPP = keepalived-$(VER)
> > DL_FILE = $(THISAPP).tar.gz
> > @@ -32,7 +32,7 @@ DL_FROM = $(URL_IPFIRE)
> > DIR_APP = $(DIR_SRC)/$(THISAPP)
> > TARGET = $(DIR_INFO)/$(THISAPP)
> > PROG = keepalived
> > -PAK_VER = 7
> > +PAK_VER = 8
> >
> > DEPS = ""
> >
> > @@ -44,7 +44,7 @@ objects = $(DL_FILE)
> >
> > $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
> >
> > -$(DL_FILE)_MD5 = 8d6400e1be43fc303175164d69125dce
> > +$(DL_FILE)_MD5 = a5966e8433b60998709c4a922a407bac
> >
> > install : $(TARGET)
> >
> > @@ -78,7 +78,7 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
> > @$(PREBUILD)
> > @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf
> > $(DIR_DL)/$(DL_FILE)
> > cd $(DIR_APP) && ./configure --prefix=/usr --sysconfdir=/etc \
> > - --with-kernel-dir=/usr/include
> > + --with-kernel-dir=/usr
> > cd $(DIR_APP) && make $(MAKETUNING)
> > cd $(DIR_APP) && make install
> >
> > --
> > 2.12.2
> >
>
>
next prev parent reply other threads:[~2020-03-15 15:47 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-10 16:10 Erik Kapfer
2020-03-15 9:23 ` Michael Tremer
2020-03-15 15:47 ` ummeegge [this message]
2020-03-16 11:12 ` Michael Tremer
2020-03-16 12:42 ` Erik Kapfer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3dbe5561b47280bf90924ae8e872c9f1c52d362a.camel@ipfire.org \
--to=ummeegge@ipfire.org \
--cc=development@lists.ipfire.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox