* [PATCH] cups-filters: Update to version 1.28.14
@ 2022-04-06 13:03 Adolf Belka
2022-04-06 17:07 ` Peter Müller
0 siblings, 1 reply; 2+ messages in thread
From: Adolf Belka @ 2022-04-06 13:03 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 5935 bytes --]
- Update from 1.28.10 to 1.28.14
- Update of rootfile not required
- Changelog
CHANGES IN V1.28.14
- pdftopdf: Correct the output when suppressing auto-rotation
(option "nopdfAutoRotate"). Depending on the situation pages
got cropped in the wrong orientation or de-centered.
- pdftopdf: Correct the output when the
"orientation-requested" or the "landscape" option is
supplied. Output could be de-centered (Issue #456),
portrait-oriented pages be wrongly cropped and division of
the output page into cells for N-up done in the wrong
orientation.
- rastertopdf: In PCLm output mode the filter failed to
generate PCLm if the printer has no
"pclm-source-resolution-default" IPP attribute.
CHANGES IN V1.28.13
- pdftopdf: Fix N-up printing when paper is taken
long-edge-first by the printer.
- pdftopdf: Fix cropping ("print-scaling=none" and
"print-scaling=fill") when paper is taken long-edge-first by
the printer (Issue #454).
- pdftops: Use Poppler for all Apple LaserWriter models (Issue
#452).
CHANGES IN V1.28.12
- imagetoraster, imagetopdf: Fixed comparison of the image
size with the page size for print-scaling=auto. The image
size in pixels was compared with the page size in PostScript
points (1/72 inch).
- imagetoraster, imagetopdf: Fixed the "print-scaling=none"
(crop-to-fit) mode, also use crop-to-fit always when
requested, do not fall back to fit-to-page when the image
size differs significantly from the page size (Issue #362).
- libcupsfilters: Changed the default PPI resolution for
images as input files from 128 to 200 (Pull request #446).
- implicitclass: Do not check availability of "gs" and
"pdftops" executables, instead, check by the presence of
"gstoraster" and "pdftoraster" filters whether we have
configured cups-filters for Ghostscript and/or Poppler use.
- libcupsfilters: In the PPD generator for the driverless
utility and cups-browsed add "*cupsFilter2: ..." lines for
all supported driverless data formats (PDF, Apple/PWG
Raster, PCLm), and add lines for legacy data formats (PCL,
PostScript) only if no driverless formats available.
- libcupsfilters: Always use encryption for ipps. RFC7472
requires that 'ipps' must be used over HTTPS, but the
driverless utility does not enforce encryption (Pull request
#433).
- serial: Add a 10-msec sleep and at the end add a tcdrain().
For some unknown reason, every printing file need sleep a
little time to make sure the serial printer receive data is
right (Pull request #431).
- libcupsfilters: Fix resolver functions for DNS-SD-based
URIs, to make resolve_uri() also work when DEVICE_URI env
variable is set and to make ippfind_based_uri_converter()
not re-direct stdin.
- pdftopdf: Set default for print-scaling to avoid "should
never happem" log messages and undefined behavior.
- pdftopdf: Fix orientation-requested = 0. Consider
this as "automatic selection and not as error.
- pdftopdf: Fixed all combinations of print-scaling and
number-up for printers with asymmetric margins (top !=
bottom or left != right) and for input files containing
pages with different sizes and/or orientations. Fixes
backported from 2.x branch.
- pdftopdf: Add 2% tolerance for input size larger than output
page when "print-scaling=auto" or "print-scaling=auto-fit"
is used and too large input pages should be scaled, fitting
documents not. This prevents a random-looking behavior if
input and output page size seem to be equal, but in reality
there are slight differences between size dimensions.
CHANGES IN V1.28.11
- libcupsfilters: Let PPD generator take default ColorModel
from printer (CUPS issue #277).
- Braille: In vectortopdf check inkscape version to call
inkscape with the correct command line (Issue #315, Pull
request #443).
- Build system: Make missing DejaVuSans.ttf non-fatal in
./configure as the font is only needed for test programs,
not for actual use of cups-filters (Issue #411).
- libcupsfilters: In imagetoraster() fixed crash with SGray
(Issue #435).
- cups-browsed: Naming of local queues is matched to CUPS'
current naming of temporary queues (no leading or trailing
underscores), to avoid duplicates in print dialogs which
support CUPS' temporary queues.
- libcupsfilters: Make cupsRasterParseIPPOptions() work correctly
with PPDs (Issue #436).
- libcupsfilters: Let colord_get_profile_for_device_id() not
return empty file name, to avoid error messages in CUPS
error_log.
- foomatic-rip: Debug message was wrongly sent to stdout and
not to log (Issue #422).
Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
---
lfs/cups-filters | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/lfs/cups-filters b/lfs/cups-filters
index 04187cd85..1b17fd252 100644
--- a/lfs/cups-filters
+++ b/lfs/cups-filters
@@ -26,7 +26,7 @@ include Config
SUMMARY = OpenPrinting CUPS filters, backends, and cups-browsed
-VER = 1.28.10
+VER = 1.28.14
THISAPP = cups-filters-$(VER)
DL_FILE = $(THISAPP).tar.xz
@@ -34,7 +34,7 @@ DL_FROM = $(URL_IPFIRE)
DIR_APP = $(DIR_SRC)/$(THISAPP)
TARGET = $(DIR_INFO)/$(THISAPP)
PROG = cups-filters
-PAK_VER = 7
+PAK_VER = 8
DEPS = cups ghostscript
@@ -50,7 +50,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_BLAKE2 = b745ad9d35e375411d43acc8936a7be3197deda26d64c3fcdf792abf751452a83ab4e77b25336509a4d15a7db3dd142c94f3fd108f514d4956ac62f00310b263
+$(DL_FILE)_BLAKE2 = 653f68a39ed16d3a8298e5784aebebead224a0ee08071add702bb02fc987f3c4d454793531db262d9a44618f4fe29a7ce0144cfb8fe77634e9b7c222de21fe62
install : $(TARGET)
--
2.35.1
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] cups-filters: Update to version 1.28.14
2022-04-06 13:03 [PATCH] cups-filters: Update to version 1.28.14 Adolf Belka
@ 2022-04-06 17:07 ` Peter Müller
0 siblings, 0 replies; 2+ messages in thread
From: Peter Müller @ 2022-04-06 17:07 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 6239 bytes --]
Reviewed-by: Peter Müller <peter.mueller(a)ipfire.org>
> - Update from 1.28.10 to 1.28.14
> - Update of rootfile not required
> - Changelog
> CHANGES IN V1.28.14
> - pdftopdf: Correct the output when suppressing auto-rotation
> (option "nopdfAutoRotate"). Depending on the situation pages
> got cropped in the wrong orientation or de-centered.
> - pdftopdf: Correct the output when the
> "orientation-requested" or the "landscape" option is
> supplied. Output could be de-centered (Issue #456),
> portrait-oriented pages be wrongly cropped and division of
> the output page into cells for N-up done in the wrong
> orientation.
> - rastertopdf: In PCLm output mode the filter failed to
> generate PCLm if the printer has no
> "pclm-source-resolution-default" IPP attribute.
> CHANGES IN V1.28.13
> - pdftopdf: Fix N-up printing when paper is taken
> long-edge-first by the printer.
> - pdftopdf: Fix cropping ("print-scaling=none" and
> "print-scaling=fill") when paper is taken long-edge-first by
> the printer (Issue #454).
> - pdftops: Use Poppler for all Apple LaserWriter models (Issue
> #452).
> CHANGES IN V1.28.12
> - imagetoraster, imagetopdf: Fixed comparison of the image
> size with the page size for print-scaling=auto. The image
> size in pixels was compared with the page size in PostScript
> points (1/72 inch).
> - imagetoraster, imagetopdf: Fixed the "print-scaling=none"
> (crop-to-fit) mode, also use crop-to-fit always when
> requested, do not fall back to fit-to-page when the image
> size differs significantly from the page size (Issue #362).
> - libcupsfilters: Changed the default PPI resolution for
> images as input files from 128 to 200 (Pull request #446).
> - implicitclass: Do not check availability of "gs" and
> "pdftops" executables, instead, check by the presence of
> "gstoraster" and "pdftoraster" filters whether we have
> configured cups-filters for Ghostscript and/or Poppler use.
> - libcupsfilters: In the PPD generator for the driverless
> utility and cups-browsed add "*cupsFilter2: ..." lines for
> all supported driverless data formats (PDF, Apple/PWG
> Raster, PCLm), and add lines for legacy data formats (PCL,
> PostScript) only if no driverless formats available.
> - libcupsfilters: Always use encryption for ipps. RFC7472
> requires that 'ipps' must be used over HTTPS, but the
> driverless utility does not enforce encryption (Pull request
> #433).
> - serial: Add a 10-msec sleep and at the end add a tcdrain().
> For some unknown reason, every printing file need sleep a
> little time to make sure the serial printer receive data is
> right (Pull request #431).
> - libcupsfilters: Fix resolver functions for DNS-SD-based
> URIs, to make resolve_uri() also work when DEVICE_URI env
> variable is set and to make ippfind_based_uri_converter()
> not re-direct stdin.
> - pdftopdf: Set default for print-scaling to avoid "should
> never happem" log messages and undefined behavior.
> - pdftopdf: Fix orientation-requested = 0. Consider
> this as "automatic selection and not as error.
> - pdftopdf: Fixed all combinations of print-scaling and
> number-up for printers with asymmetric margins (top !=
> bottom or left != right) and for input files containing
> pages with different sizes and/or orientations. Fixes
> backported from 2.x branch.
> - pdftopdf: Add 2% tolerance for input size larger than output
> page when "print-scaling=auto" or "print-scaling=auto-fit"
> is used and too large input pages should be scaled, fitting
> documents not. This prevents a random-looking behavior if
> input and output page size seem to be equal, but in reality
> there are slight differences between size dimensions.
> CHANGES IN V1.28.11
> - libcupsfilters: Let PPD generator take default ColorModel
> from printer (CUPS issue #277).
> - Braille: In vectortopdf check inkscape version to call
> inkscape with the correct command line (Issue #315, Pull
> request #443).
> - Build system: Make missing DejaVuSans.ttf non-fatal in
> ./configure as the font is only needed for test programs,
> not for actual use of cups-filters (Issue #411).
> - libcupsfilters: In imagetoraster() fixed crash with SGray
> (Issue #435).
> - cups-browsed: Naming of local queues is matched to CUPS'
> current naming of temporary queues (no leading or trailing
> underscores), to avoid duplicates in print dialogs which
> support CUPS' temporary queues.
> - libcupsfilters: Make cupsRasterParseIPPOptions() work correctly
> with PPDs (Issue #436).
> - libcupsfilters: Let colord_get_profile_for_device_id() not
> return empty file name, to avoid error messages in CUPS
> error_log.
> - foomatic-rip: Debug message was wrongly sent to stdout and
> not to log (Issue #422).
>
> Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
> ---
> lfs/cups-filters | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/lfs/cups-filters b/lfs/cups-filters
> index 04187cd85..1b17fd252 100644
> --- a/lfs/cups-filters
> +++ b/lfs/cups-filters
> @@ -26,7 +26,7 @@ include Config
>
> SUMMARY = OpenPrinting CUPS filters, backends, and cups-browsed
>
> -VER = 1.28.10
> +VER = 1.28.14
>
> THISAPP = cups-filters-$(VER)
> DL_FILE = $(THISAPP).tar.xz
> @@ -34,7 +34,7 @@ DL_FROM = $(URL_IPFIRE)
> DIR_APP = $(DIR_SRC)/$(THISAPP)
> TARGET = $(DIR_INFO)/$(THISAPP)
> PROG = cups-filters
> -PAK_VER = 7
> +PAK_VER = 8
>
> DEPS = cups ghostscript
>
> @@ -50,7 +50,7 @@ objects = $(DL_FILE)
>
> $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>
> -$(DL_FILE)_BLAKE2 = b745ad9d35e375411d43acc8936a7be3197deda26d64c3fcdf792abf751452a83ab4e77b25336509a4d15a7db3dd142c94f3fd108f514d4956ac62f00310b263
> +$(DL_FILE)_BLAKE2 = 653f68a39ed16d3a8298e5784aebebead224a0ee08071add702bb02fc987f3c4d454793531db262d9a44618f4fe29a7ce0144cfb8fe77634e9b7c222de21fe62
>
> install : $(TARGET)
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-04-06 17:07 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-06 13:03 [PATCH] cups-filters: Update to version 1.28.14 Adolf Belka
2022-04-06 17:07 ` Peter Müller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox