Re: Fails while trying to update autoconf

[Michael Tremer <michael.tremer@ipfire.org>]

[-- Attachment #1: Type: text/plain, Size: 46107 bytes --]

Hello,

Did you try adding —-with-fp-layout=nothing to configure?

> On 6 Feb 2021, at 13:10, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
> 
> Hi,
> 
> On 05/02/2021 18:59, Michael Tremer wrote:
>> Hi,
>>> On 5 Feb 2021, at 17:25, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>>> 
>>> Hi Michael,
>>> 
>>> On 05/02/2021 17:13, Michael Tremer wrote:
>>>> Hello,
>>>> It looks like this configure script is simply incompatible with newer versions of autoconf.
>>>> The only option I see is to manually update it and patch it. Unfortunately we are stuck on collectd 4.10 and cannot really update it without breaking things. That is quite annoying, but I guess updating configure.ac is easier than migrating to collectd 5 or whatever is the newest release right now.
>>>> Did you try running “autoupdate” as it is being suggested in the error message?
>>> No I had not tried it. I don't really have any excuse for why that message did not register in my mind when I was looking through the log file, especially as it is repeated numerous times. :-) Oh well.
>> I didn’t see it first either. I just saw it later on the quoted part of the email when I typed a response :)
>>> I have looked up what autoupdate is and how to use it and I will give it a go and see what happens.
>> Just run it and see if it converts things properly. If not, we will need to do it manually.
> 
> I ran autoupdate -v configure.in after all the patch files were run.
> The previous warning messages about needing to run autoupdate dissappeared. It did warn that
> 
> aclocal.m4:16: warning: this file was generated for autoconf 2.67.
> You have another version of autoconf.  It may work, but is not guaranteed to.
> If you have problems, you may need to regenerate the build system entirely.
> To do so, use the procedure documented by the package, typically `autoreconf'.
> 
> and finished with
> 
> autoupdate: 'configure.in' is updated
> 
> However, during running the .configure it ended up with the same error message about how doubles are stored in memory.
> There are various messages about remembering to add or considering to add certain bits to configure.in but I am not sure which to follow or how to actually add them to configure.in
> 
> I have removed the old log file details at the end of this mail and inserted the new log file messages for the build of collectd.
> 
> Adolf.
>> -Michael
>>> Thanks for the pointer.
>>> 
>>> Regards,
>>> Adolf.
>>>> -Michael
>>>>> On 5 Feb 2021, at 13:08, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>>>>> 
>>>>> Hi all,
>>>>> 
>>>>> I have been trying to update autoconf from version 2.69 to 2.71 but I have been getting a build failure from collectd when I do that.
>>>>> 
>>>>> I made autoconf the only update being carried out after having done a git pull from next. the same failure occurred.
>>>>> 
>>>>> The final error message is:-
>>>>> 
>>>>> -checking if doubles are stored in x86 representation... ./configure: line 15649: ac_fn_c_try_run: command not found
>>>>> -no
>>>>> -checking if endianflip converts to x86 representation... ./configure: line 15733: ac_fn_c_try_run: command not found
>>>>> -no
>>>>> -checking if intswap converts to x86 representation... ./configure: line 15811: ac_fn_c_try_run: command not found
>>>>> -no
>>>>> -configure: error: Didn't find out how doubles are stored in memory. Sorry.
>>>>> -make: *** [collectd:111: /usr/src/log/collectd-4.10.9] Error 1
>>>>> 
>>>>> Full log for collectd build is below.
>>>>> 
>>>>> As a test I also tried updating from 2.69 to 2.70 but this then failed at coreutils with a totally different fail message. If required I also have the log file for the coreutils build
>>>>> 
>>>>> I have run out of ideas for how to fix this. I found the ac_fn_c_try_run command in the collectd configure file but could not figure out what relation it might have to autoconf and the version change.
>>>>> 
>>>>> Any pointers on what I should look at or do to fix this would be very valued.
>>>>> 
>>>>> Regards,
>>>>> 
>>>>> Adolf.
>>>>> 
> 
> -------------------------------------------------
> Feb  6 11:48:34: Building collectd collectd-4.10.9.tar.bz2 checksum OK
> + cd /usr/src/lfs
> + make -f collectd LFS_BASEDIR=/usr/src install
> ====================================== Installing collectd-4.10.9 ...
> Install started; saving file list to /usr/src/lsalr ...
> cd /usr/src/collectd-4.10.9 && find . -name "Makefile.*" | xargs sed -e "s/-Werror//g" -i
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0001-src-utils_mount.h-Add-stdio.h.patch
> patching file src/utils_mount.h
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0002-Don-t-notify-continuously-when-MySQL-slave-SQL-threa.patch
> patching file src/mysql.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0003-curl_xml.c-avoid-using-uninitalized-variable-in-erro.patch
> patching file src/curl_xml.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0004-interface.c-FreeBSD-10-support.patch
> patching file src/interface.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0005-Revert-curl_xml.c-avoid-using-uninitalized-variable-.patch
> patching file src/curl_xml.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0006-network-set_thread_cbs-so-we-initialize-the-right-th.patch
> patching file src/network.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0007-apache-plugin-Call-curl_global_init-from-the-init-fu.patch
> patching file src/apache.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0008-network-comment-libgcrypt-initalization-process.patch
> patching file src/network.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0009-Call-curl_global_init-in-_init-of-plugins-using-curl.patch
> patching file src/curl.c
> patching file src/curl_json.c
> patching file src/curl_xml.c
> patching file src/write_http.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0010-indent-wh_init-to-be-consistent-with-the-rest-of-the.patch
> patching file src/write_http.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0011-Configparser-when-we-alocate-an-empty-list-we-also-n.patch
> patching file src/configfile.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0012-don-t-assume-pkg-config-is-in-PATH.patch
> patching file configure.in
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0013-add-missing-backticks-which-broke-the-build.patch
> patching file configure.in
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0014-snmp-free-snmp_pdu-struct-allocated-by-snmp_pdu_crea.patch
> patching file src/snmp.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0015-curl_xml-plugin-Fixed-tautological-pointer-compariso.patch
> patching file src/curl_xml.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0016-Add-support-for-OpenVPN-2.3.0-status-files.patch
> patching file src/openvpn.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0017-openvpn-plugin-Don-t-signal-an-error-when-no-clients.patch
> patching file src/openvpn.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0018-openvpn-Remove-boguous-file-handler-check.patch
> patching file src/openvpn.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0019-openvpn-Ignore-not-fully-established-connections.patch
> patching file src/openvpn.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0020-openvpn-Make-read-functions-robust-like-in-8516f9abb.patch
> patching file src/openvpn.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0021-openvpn-Fix-copy-and-paste-error.patch
> patching file src/openvpn.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0022-openvpn-Change-data-type-from-COUNTER-to-DERIVE.patch
> patching file src/openvpn.c
> patching file src/types.db
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/silence-openvpn-errors.patch
> patching file src/openvpn.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd-4.10.9-xfs-compile-fix.patch
> patching file src/utils_mount.c
> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd-4.10-libiptc-build-fixes.patch
> patching file src/Makefile.am
> cd /usr/src/collectd-4.10.9 && autoupdate -v configure.in
> autoupdate: running: echo dumpdef | /tools_x86_64/bin/m4 2>/tmp/au0JiQkO/m4.defs >/dev/null
> autom4te: the trace request object is:
> autom4te: $VAR1 = bless( [
> autom4te:                  '0',
> autom4te:                  0,
> autom4te:                  [
> autom4te:                    '/usr/share/autoconf'
> autom4te:                  ],
> autom4te:                  [
> autom4te:                    '/usr/share/autoconf/m4sugar/m4sugar.m4',
> autom4te:                    '/usr/share/autoconf/m4sugar/m4sh.m4',
> autom4te:                    '/usr/share/autoconf/autoconf/autoconf.m4',
> autom4te:                    'aclocal.m4',
> autom4te:                    '/dev/null'
> autom4te:                  ],
> autom4te:                  {
> autom4te:                    'AC_SUBST_TRACE' => 1,
> autom4te:                    'AM_PROG_CXX_C_O' => 1,
> autom4te:                    '_AM_MAKEFILE_INCLUDE' => 1,
> autom4te:                    'AC_FC_SRCEXT' => 1,
> autom4te:                    'AM_PROG_AR' => 1,
> autom4te:                    'LT_CONFIG_LTDL_DIR' => 1,
> autom4te:                    'AC_REQUIRE_AUX_FILE' => 1,
> autom4te:                    'AM_SILENT_RULES' => 1,
> autom4te:                    'AC_CONFIG_HEADERS' => 1,
> autom4te:                    'AM_ENABLE_MULTILIB' => 1,
> autom4te:                    'AC_CANONICAL_HOST' => 1,
> autom4te:                    'AM_PROG_CC_C_O' => 1,
> autom4te:                    'AC_CONFIG_MACRO_DIR_TRACE' => 1,
> autom4te:                    'AC_CANONICAL_SYSTEM' => 1,
> autom4te:                    'AM_PROG_MOC' => 1,
> autom4te:                    'AC_INIT' => 1,
> autom4te:                    'AC_CONFIG_LIBOBJ_DIR' => 1,
> autom4te:                    'm4_pattern_allow' => 1,
> autom4te:                    'AC_CONFIG_AUX_DIR' => 1,
> autom4te:                    'AC_CANONICAL_TARGET' => 1,
> autom4te:                    'm4_sinclude' => 1,
> autom4te:                    'AM_MAKEFILE_INCLUDE' => 1,
> autom4te:                    'AU_DEFINE' => 1,
> autom4te:                    '_LT_AC_TAGCONFIG' => 1,
> autom4te:                    'AC_CANONICAL_BUILD' => 1,
> autom4te:                    'm4_pattern_forbid' => 1,
> autom4te:                    '_m4_warn' => 1,
> autom4te:                    'AC_DEFINE_TRACE_LITERAL' => 1,
> autom4te:                    'm4_define' => 1,
> autom4te:                    '_AM_COND_IF' => 1,
> autom4te:                    'AM_PROG_FC_C_O' => 1,
> autom4te:                    'AM_MAINTAINER_MODE' => 1,
> autom4te:                    'AM_GNU_GETTEXT' => 1,
> autom4te:                    '_AM_COND_ELSE' => 1,
> autom4te:                    'define' => 1,
> autom4te:                    'AM_NLS' => 1,
> autom4te:                    'AC_SUBST' => 1,
> autom4te:                    'AM_EXTRA_RECURSIVE_TARGETS' => 1,
> autom4te:                    'AM_CONDITIONAL' => 1,
> autom4te:                    'LT_INIT' => 1,
> autom4te:                    'AM_PROG_F77_C_O' => 1,
> autom4te:                    'AM_GNU_GETTEXT_INTL_SUBDIR' => 1,
> autom4te:                    'AM_AUTOMAKE_VERSION' => 1,
> autom4te:                    'AM_INIT_AUTOMAKE' => 1,
> autom4te:                    'AM_PROG_LIBTOOL' => 1,
> autom4te:                    'AC_PROG_LIBTOOL' => 1,
> autom4te:                    'AM_XGETTEXT_OPTION' => 1,
> autom4te:                    'GTK_DOC_CHECK' => 1,
> autom4te:                    'AC_CONFIG_FILES' => 1,
> autom4te:                    'AM_PROG_MKDIR_P' => 1,
> autom4te:                    'AC_FC_FREEFORM' => 1,
> autom4te:                    'include' => 1,
> autom4te:                    'AH_OUTPUT' => 1,
> autom4te:                    'AC_CONFIG_SUBDIRS' => 1,
> autom4te:                    'AC_CONFIG_LINKS' => 1,
> autom4te:                    'IT_PROG_INTLTOOL' => 1,
> autom4te:                    '_AM_SUBST_NOTMAKE' => 1,
> autom4te:                    'AC_LIBSOURCE' => 1,
> autom4te:                    'AM_POT_TOOLS' => 1,
> autom4te:                    'm4_include' => 1,
> autom4te:                    '_AM_COND_ENDIF' => 1,
> autom4te:                    'AC_FC_PP_DEFINE' => 1,
> autom4te:                    'AC_FC_PP_SRCEXT' => 1,
> autom4te:                    'sinclude' => 1,
> autom4te:                    'LT_SUPPORTED_TAG' => 1,
> autom4te:                    'AM_PATH_GUILE' => 1
> autom4te:                  }
> autom4te:                ], 'Autom4te::Request' );
> autom4te: running: /tools_x86_64/bin/m4 --nesting-limit=1024 --gnu --include=/usr/share/autoconf --debug=aflq --fatal-warning --debugfile=autom4te.cache/traces.0t --trace=AC_CANONICAL_BUILD --trace=AC_CANONICAL_HOST --trace=AC_CANONICAL_SYSTEM --trace=AC_CANONICAL_TARGET --trace=AC_CONFIG_AUX_DIR --trace=AC_CONFIG_FILES --trace=AC_CONFIG_HEADERS --trace=AC_CONFIG_LIBOBJ_DIR --trace=AC_CONFIG_LINKS --trace=AC_CONFIG_MACRO_DIR_TRACE --trace=AC_CONFIG_SUBDIRS --trace=AC_DEFINE_TRACE_LITERAL --trace=AC_FC_FREEFORM --trace=AC_FC_PP_DEFINE --trace=AC_FC_PP_SRCEXT --trace=AC_FC_SRCEXT --trace=AC_INIT --trace=AC_LIBSOURCE --trace=AC_PROG_LIBTOOL --trace=AC_REQUIRE_AUX_FILE --trace=AC_SUBST --trace=AC_SUBST_TRACE --trace=AH_OUTPUT --trace=AM_AUTOMAKE_VERSION --trace=AM_CONDITIONAL --trace=AM_ENABLE_MULTILIB --trace=AM_EXTRA_RECURSIVE_TARGETS --trace=AM_GNU_GETTEXT --trace=AM_GNU_GETTEXT_INTL_SUBDIR --trace=AM_INIT_AUTOMAKE --trace=AM_MAINTAINER_MODE --trace=AM_MAKEFILE_INCLUDE --trace=AM_NLS --trace=AM_PATH_GUILE --trace=AM_POT_TOOLS --trace=AM_PROG_AR --trace=AM_PROG_CC_C_O --trace=AM_PROG_CXX_C_O --trace=AM_PROG_F77_C_O --trace=AM_PROG_FC_C_O --trace=AM_PROG_LIBTOOL --trace=AM_PROG_MKDIR_P --trace=AM_PROG_MOC --trace=AM_SILENT_RULES --trace=AM_XGETTEXT_OPTION --trace=AU_DEFINE --trace=GTK_DOC_CHECK --trace=IT_PROG_INTLTOOL --trace=LT_CONFIG_LTDL_DIR --trace=LT_INIT --trace=LT_SUPPORTED_TAG --trace=_AM_COND_ELSE --trace=_AM_COND_ENDIF --trace=_AM_COND_IF --trace=_AM_MAKEFILE_INCLUDE --trace=_AM_SUBST_NOTMAKE --trace=_LT_AC_TAGCONFIG --trace=_m4_warn --trace=define --trace=include --trace=m4_define --trace=m4_include --trace=m4_pattern_allow --trace=m4_pattern_forbid --trace=m4_sinclude --trace=sinclude /usr/share/autoconf/m4sugar/m4sugar.m4 /usr/share/autoconf/m4sugar/m4sh.m4 /usr/share/autoconf/autoconf/autoconf.m4 aclocal.m4 /dev/null > autom4te.cache/output.0t
> aclocal.m4:16: warning: this file was generated for autoconf 2.67.
> You have another version of autoconf.  It may work, but is not guaranteed to.
> If you have problems, you may need to regenerate the build system entirely.
> To do so, use the procedure documented by the package, typically `autoreconf'.
> autom4te: formatting traces for '/tmp/am4tMWPbON/warnings': _m4_warn
> autom4te: reading /tmp/am4tMWPbON/warnings
> autom4te: formatting traces for '-': AU_DEFINE, define, m4_define
> autoupdate: running: /usr/bin/autom4te --language=autoconf --verbose --include=/usr/share/autoconf --trace AU_DEFINE:'_au_defun(@<:@$1@:>@,
> autoupdate: @<:@$2@:>@)' --melt /dev/null >/tmp/au0JiQkO/au.m4
> autom4te: formatting traces for '/tmp/am4tkPPwdb/dependencies': include, m4_include
> autom4te: up_to_date (autom4te.cache/traces.0): up to date
> autom4te: the trace request object is:
> autom4te: $VAR1 = bless( [
> autom4te:                  '0',
> autom4te:                  1,
> autom4te:                  [
> autom4te:                    '/usr/share/autoconf'
> autom4te:                  ],
> autom4te:                  [
> autom4te:                    '/usr/share/autoconf/m4sugar/m4sugar.m4',
> autom4te:                    '/usr/share/autoconf/m4sugar/m4sh.m4',
> autom4te:                    '/usr/share/autoconf/autoconf/autoconf.m4',
> autom4te:                    'aclocal.m4',
> autom4te:                    '/dev/null'
> autom4te:                  ],
> autom4te:                  {
> autom4te:                    'AC_CONFIG_LINKS' => 1,
> autom4te:                    'AM_SILENT_RULES' => 1,
> autom4te:                    'AH_OUTPUT' => 1,
> autom4te:                    'AC_FC_SRCEXT' => 1,
> autom4te:                    'GTK_DOC_CHECK' => 1,
> autom4te:                    'AM_MAKEFILE_INCLUDE' => 1,
> autom4te:                    'AC_CANONICAL_TARGET' => 1,
> autom4te:                    'AM_EXTRA_RECURSIVE_TARGETS' => 1,
> autom4te:                    'm4_define' => 1,
> autom4te:                    'AM_ENABLE_MULTILIB' => 1,
> autom4te:                    'm4_pattern_forbid' => 1,
> autom4te:                    'AM_PROG_AR' => 1,
> autom4te:                    'AM_AUTOMAKE_VERSION' => 1,
> autom4te:                    'AC_CANONICAL_BUILD' => 1,
> autom4te:                    'AM_XGETTEXT_OPTION' => 1,
> autom4te:                    'define' => 1,
> autom4te:                    'AC_FC_FREEFORM' => 1,
> autom4te:                    'AC_CANONICAL_SYSTEM' => 1,
> autom4te:                    'AM_MAINTAINER_MODE' => 1,
> autom4te:                    'AM_PROG_FC_C_O' => 1,
> autom4te:                    'AC_SUBST_TRACE' => 1,
> autom4te:                    'AC_FC_PP_DEFINE' => 1,
> autom4te:                    'AM_GNU_GETTEXT_INTL_SUBDIR' => 1,
> autom4te:                    'AC_CANONICAL_HOST' => 1,
> autom4te:                    'AC_CONFIG_LIBOBJ_DIR' => 1,
> autom4te:                    'AC_FC_PP_SRCEXT' => 1,
> autom4te:                    '_AM_MAKEFILE_INCLUDE' => 1,
> autom4te:                    '_AM_COND_ENDIF' => 1,
> autom4te:                    'AM_PROG_MOC' => 1,
> autom4te:                    'AM_POT_TOOLS' => 1,
> autom4te:                    'AM_INIT_AUTOMAKE' => 1,
> autom4te:                    'AC_CONFIG_FILES' => 1,
> autom4te:                    'LT_INIT' => 1,
> autom4te:                    'AC_PROG_LIBTOOL' => 1,
> autom4te:                    'm4_pattern_allow' => 1,
> autom4te:                    'include' => 1,
> autom4te:                    '_AM_SUBST_NOTMAKE' => 1,
> autom4te:                    'AM_PROG_CXX_C_O' => 1,
> autom4te:                    'AM_PROG_F77_C_O' => 1,
> autom4te:                    'AM_PROG_MKDIR_P' => 1,
> autom4te:                    '_AM_COND_ELSE' => 1,
> autom4te:                    'AC_CONFIG_MACRO_DIR_TRACE' => 1,
> autom4te:                    'LT_CONFIG_LTDL_DIR' => 1,
> autom4te:                    'AC_LIBSOURCE' => 1,
> autom4te:                    'AM_GNU_GETTEXT' => 1,
> autom4te:                    'AM_CONDITIONAL' => 1,
> autom4te:                    'AC_CONFIG_HEADERS' => 1,
> autom4te:                    'LT_SUPPORTED_TAG' => 1,
> autom4te:                    'AC_SUBST' => 1,
> autom4te:                    'AM_PROG_CC_C_O' => 1,
> autom4te:                    'AC_DEFINE_TRACE_LITERAL' => 1,
> autom4te:                    'm4_sinclude' => 1,
> autom4te:                    'AU_DEFINE' => 1,
> autom4te:                    'AM_NLS' => 1,
> autom4te:                    'AM_PATH_GUILE' => 1,
> autom4te:                    'AC_CONFIG_AUX_DIR' => 1,
> autom4te:                    'm4_include' => 1,
> autom4te:                    'IT_PROG_INTLTOOL' => 1,
> autom4te:                    '_AM_COND_IF' => 1,
> autom4te:                    'AC_REQUIRE_AUX_FILE' => 1,
> autom4te:                    'AC_INIT' => 1,
> autom4te:                    '_LT_AC_TAGCONFIG' => 1,
> autom4te:                    'AC_CONFIG_SUBDIRS' => 1,
> autom4te:                    'sinclude' => 1,
> autom4te:                    '_m4_warn' => 1,
> autom4te:                    'AM_PROG_LIBTOOL' => 1
> autom4te:                  }
> autom4te:                ], 'Autom4te::Request' );
> autom4te: formatting traces for '/tmp/am4tkPPwdb/warnings': _m4_warn
> autom4te: reading /tmp/am4tkPPwdb/warnings
> autom4te: formatting traces for '-': AU_DEFINE
> autoupdate: running: /tools_x86_64/bin/m4 --include=/tmp/au0JiQkO --include=/usr/share/autoconf /tmp/au0JiQkO/input.m4 > /tmp/au0JiQkO/updated
> configure.in:121: warning: The preprocessor macro `STDC_HEADERS' is obsolete.
>  Except in unusual embedded environments, you can safely include all
>  ISO C90 headers unconditionally.
> configure.in:500: warning: Update your code to rely only on HAVE_SYS_TIME_H,
> then remove this warning and the obsolete code below it.
> All current systems provide time.h; it need not be checked for.
> Not all systems provide sys/time.h, but those that do, all allow
> you to include it and time.h simultaneously.
> autoupdate: 'configure.in' is updated
> cd /usr/src/collectd-4.10.9 && autoreconf -vfi
> autoreconf: export WARNINGS=
> autoreconf: warning: autoconf input should be named 'configure.ac', not 'configure.in'
> autoreconf: Entering directory '.'
> autoreconf: configure.in: not using Gettext
> autoreconf: running: aclocal --force -I libltdl/m4
> aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
> autoreconf: configure.in: tracing
> autoreconf: configure.in: adding subdirectory libltdl to autoreconf
> autoreconf: Entering directory 'libltdl'
> autoreconf: configure.ac: not using Gettext
> autoreconf: running: aclocal --force -I m4
> autoreconf: configure.ac: tracing
> autoreconf: running: libtoolize --copy --force --ltdl
> libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'config'.
> libtoolize: copying file 'config/compile'
> libtoolize: copying file 'config/config.guess'
> libtoolize: copying file 'config/config.sub'
> libtoolize: copying file 'config/depcomp'
> libtoolize: copying file 'config/install-sh'
> libtoolize: copying file 'config/missing'
> libtoolize: copying file 'config/ltmain.sh'
> libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
> libtoolize: copying file 'm4/libtool.m4'
> libtoolize: copying file 'm4/ltargz.m4'
> libtoolize: You should add the contents of 'm4/ltargz.m4' to 'aclocal.m4'.
> libtoolize: copying file 'm4/ltdl.m4'
> libtoolize: copying file 'm4/ltoptions.m4'
> libtoolize: copying file 'm4/ltsugar.m4'
> libtoolize: copying file 'm4/ltversion.m4'
> libtoolize: copying file 'm4/lt~obsolete.m4'
> libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, '.'.
> libtoolize: copying file './COPYING.LIB'
> libtoolize: creating file './Makefile.am'
> libtoolize: copying file './README'
> libtoolize: creating file './configure.ac'
> libtoolize: creating file './aclocal.m4'
> libtoolize: creating file './Makefile.in'
> libtoolize: copying file './config-h.in'
> libtoolize: creating file './configure'
> libtoolize: copying file './libltdl/lt__alloc.h'
> libtoolize: copying file './libltdl/lt__argz_.h'
> libtoolize: copying file './libltdl/lt__dirent.h'
> libtoolize: copying file './libltdl/lt__glibc.h'
> libtoolize: copying file './libltdl/lt__private.h'
> libtoolize: copying file './libltdl/lt__strl.h'
> libtoolize: copying file './libltdl/lt_dlloader.h'
> libtoolize: copying file './libltdl/lt_error.h'
> libtoolize: copying file './libltdl/lt_system.h'
> libtoolize: copying file './libltdl/slist.h'
> libtoolize: copying file './loaders/dld_link.c'
> libtoolize: copying file './loaders/dlopen.c'
> libtoolize: copying file './loaders/dyld.c'
> libtoolize: copying file './loaders/load_add_on.c'
> libtoolize: copying file './loaders/loadlibrary.c'
> libtoolize: copying file './loaders/preopen.c'
> libtoolize: copying file './loaders/shl_load.c'
> libtoolize: copying file './lt__alloc.c'
> libtoolize: copying file './lt__argz.c'
> libtoolize: copying file './lt__dirent.c'
> libtoolize: copying file './lt__strl.c'
> libtoolize: copying file './lt_dlloader.c'
> libtoolize: copying file './lt_error.c'
> libtoolize: copying file './ltdl.c'
> libtoolize: copying file './ltdl.h'
> libtoolize: copying file './slist.c'
> libtoolize: Remember to add 'LTDL_INIT' to configure.ac.
> autoreconf: configure.ac: not using Intltool
> autoreconf: configure.ac: not using Gtkdoc
> autoreconf: running: aclocal --force -I m4
> autoreconf: running: /usr/bin/autoconf --force
> autoreconf: running: /usr/bin/autoheader --force
> autoreconf: running: automake --add-missing --copy --force-missing
> autoreconf: 'config/config.sub' is updated
> autoreconf: 'config/config.guess' is updated
> autoreconf: Leaving directory 'libltdl'
> autoreconf: running: libtoolize --copy --force --ltdl --ltdl
> libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'libltdl/config'.
> libtoolize: copying file 'libltdl/config/compile'
> libtoolize: copying file 'libltdl/config/config.guess'
> libtoolize: copying file 'libltdl/config/config.sub'
> libtoolize: copying file 'libltdl/config/depcomp'
> libtoolize: copying file 'libltdl/config/install-sh'
> libtoolize: copying file 'libltdl/config/missing'
> libtoolize: copying file 'libltdl/config/ltmain.sh'
> libtoolize: putting macros in 'libltdl/m4'.
> libtoolize: copying file 'libltdl/m4/libtool.m4'
> libtoolize: copying file 'libltdl/m4/ltargz.m4'
> libtoolize: You should add the contents of 'libltdl/m4/ltargz.m4' to 'aclocal.m4'.
> libtoolize: copying file 'libltdl/m4/ltdl.m4'
> libtoolize: copying file 'libltdl/m4/ltoptions.m4'
> libtoolize: copying file 'libltdl/m4/ltsugar.m4'
> libtoolize: copying file 'libltdl/m4/ltversion.m4'
> libtoolize: copying file 'libltdl/m4/lt~obsolete.m4'
> libtoolize: putting libltdl files in 'libltdl'.
> libtoolize: copying file 'libltdl/COPYING.LIB'
> libtoolize: creating file 'libltdl/Makefile.am'
> libtoolize: copying file 'libltdl/README'
> libtoolize: creating file 'libltdl/configure.ac'
> libtoolize: creating file 'libltdl/aclocal.m4'
> libtoolize: creating file 'libltdl/Makefile.in'
> libtoolize: copying file 'libltdl/config-h.in'
> libtoolize: creating file 'libltdl/configure'
> libtoolize: copying file 'libltdl/libltdl/lt__alloc.h'
> libtoolize: copying file 'libltdl/libltdl/lt__argz_.h'
> libtoolize: copying file 'libltdl/libltdl/lt__dirent.h'
> libtoolize: copying file 'libltdl/libltdl/lt__glibc.h'
> libtoolize: copying file 'libltdl/libltdl/lt__private.h'
> libtoolize: copying file 'libltdl/libltdl/lt__strl.h'
> libtoolize: copying file 'libltdl/libltdl/lt_dlloader.h'
> libtoolize: copying file 'libltdl/libltdl/lt_error.h'
> libtoolize: copying file 'libltdl/libltdl/lt_system.h'
> libtoolize: copying file 'libltdl/libltdl/slist.h'
> libtoolize: copying file 'libltdl/loaders/dld_link.c'
> libtoolize: copying file 'libltdl/loaders/dlopen.c'
> libtoolize: copying file 'libltdl/loaders/dyld.c'
> libtoolize: copying file 'libltdl/loaders/load_add_on.c'
> libtoolize: copying file 'libltdl/loaders/loadlibrary.c'
> libtoolize: copying file 'libltdl/loaders/preopen.c'
> libtoolize: copying file 'libltdl/loaders/shl_load.c'
> libtoolize: copying file 'libltdl/lt__alloc.c'
> libtoolize: copying file 'libltdl/lt__argz.c'
> libtoolize: copying file 'libltdl/lt__dirent.c'
> libtoolize: copying file 'libltdl/lt__strl.c'
> libtoolize: copying file 'libltdl/lt_dlloader.c'
> libtoolize: copying file 'libltdl/lt_error.c'
> libtoolize: copying file 'libltdl/ltdl.c'
> libtoolize: copying file 'libltdl/ltdl.h'
> libtoolize: copying file 'libltdl/slist.c'
> libtoolize: Remember to add 'LTDL_INIT' to configure.in.
> libtoolize: Remember to add 'LT_CONFIG_LTDL_DIR([libltdl])' to 'configure.in'.
> libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([libltdl/m4])' to configure.in,
> libtoolize: and rerunning libtoolize and aclocal.
> autoreconf: configure.in: not using Intltool
> autoreconf: configure.in: not using Gtkdoc
> autoreconf: running: aclocal --force -I libltdl/m4
> aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in'
> autoreconf: running: /usr/bin/autoconf --force
> configure.in:51: warning: AC_PROG_LEX without either yywrap or noyywrap is obsolete
> ./lib/autoconf/programs.m4:716: _AC_PROG_LEX is expanded from...
> ./lib/autoconf/programs.m4:709: AC_PROG_LEX is expanded from...
> configure.in:51: the top level
> configure.in:125: warning: The preprocessor macro `STDC_HEADERS' is obsolete.
> configure.in:125:   Except in unusual embedded environments, you can safely include all
> configure.in:125:   ISO C90 headers unconditionally.
> configure.in:512: warning: Update your code to rely only on HAVE_SYS_TIME_H,
> configure.in:512: then remove this warning and the obsolete code below it.
> configure.in:512: All current systems provide time.h; it need not be checked for.
> configure.in:512: Not all systems provide sys/time.h, but those that do, all allow
> configure.in:512: you to include it and time.h simultaneously.
> autoreconf: running: /usr/bin/autoheader --force
> autoheader: warning: autoconf input should be named 'configure.ac', not 'configure.in'
> autoreconf: running: automake --add-missing --copy --force-missing
> automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
> Makefile.am:5: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS')
> automake: warning: autoconf input should be named 'configure.ac', not 'configure.in'
> autoreconf: 'libltdl/config/config.sub' is updated
> autoreconf: 'libltdl/config/config.guess' is updated
> autoreconf: Leaving directory '.'
> cd /usr/src/collectd-4.10.9/libltdl && autoreconf -vfi
> autoreconf: export WARNINGS=
> autoreconf: Entering directory '.'
> autoreconf: configure.ac: not using Gettext
> autoreconf: running: aclocal --force -I m4
> autoreconf: configure.ac: tracing
> autoreconf: running: libtoolize --copy --force --ltdl
> libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'config'.
> libtoolize: copying file 'config/compile'
> libtoolize: copying file 'config/config.guess'
> libtoolize: copying file 'config/config.sub'
> libtoolize: copying file 'config/depcomp'
> libtoolize: copying file 'config/install-sh'
> libtoolize: copying file 'config/missing'
> libtoolize: copying file 'config/ltmain.sh'
> libtoolize: putting macros in 'm4'.
> libtoolize: copying file 'm4/libtool.m4'
> libtoolize: copying file 'm4/ltargz.m4'
> libtoolize: copying file 'm4/ltdl.m4'
> libtoolize: copying file 'm4/ltoptions.m4'
> libtoolize: copying file 'm4/ltsugar.m4'
> libtoolize: copying file 'm4/ltversion.m4'
> libtoolize: copying file 'm4/lt~obsolete.m4'
> libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, '.'.
> libtoolize: copying file './COPYING.LIB'
> libtoolize: creating file './Makefile.am'
> libtoolize: copying file './README'
> libtoolize: creating file './configure.ac'
> libtoolize: creating file './aclocal.m4'
> libtoolize: creating file './Makefile.in'
> libtoolize: copying file './config-h.in'
> libtoolize: creating file './configure'
> libtoolize: copying file './libltdl/lt__alloc.h'
> libtoolize: copying file './libltdl/lt__argz_.h'
> libtoolize: copying file './libltdl/lt__dirent.h'
> libtoolize: copying file './libltdl/lt__glibc.h'
> libtoolize: copying file './libltdl/lt__private.h'
> libtoolize: copying file './libltdl/lt__strl.h'
> libtoolize: copying file './libltdl/lt_dlloader.h'
> libtoolize: copying file './libltdl/lt_error.h'
> libtoolize: copying file './libltdl/lt_system.h'
> libtoolize: copying file './libltdl/slist.h'
> libtoolize: copying file './loaders/dld_link.c'
> libtoolize: copying file './loaders/dlopen.c'
> libtoolize: copying file './loaders/dyld.c'
> libtoolize: copying file './loaders/load_add_on.c'
> libtoolize: copying file './loaders/loadlibrary.c'
> libtoolize: copying file './loaders/preopen.c'
> libtoolize: copying file './loaders/shl_load.c'
> libtoolize: copying file './lt__alloc.c'
> libtoolize: copying file './lt__argz.c'
> libtoolize: copying file './lt__dirent.c'
> libtoolize: copying file './lt__strl.c'
> libtoolize: copying file './lt_dlloader.c'
> libtoolize: copying file './lt_error.c'
> libtoolize: copying file './ltdl.c'
> libtoolize: copying file './ltdl.h'
> libtoolize: copying file './slist.c'
> libtoolize: Remember to add 'LTDL_INIT' to configure.ac.
> libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
> libtoolize: and rerunning libtoolize and aclocal.
> autoreconf: configure.ac: not using Intltool
> autoreconf: configure.ac: not using Gtkdoc
> autoreconf: running: aclocal --force -I m4
> autoreconf: running: /usr/bin/autoconf --force
> autoreconf: running: /usr/bin/autoheader --force
> autoreconf: running: automake --add-missing --copy --force-missing
> autoreconf: 'config/config.sub' is updated
> autoreconf: 'config/config.guess' is updated
> autoreconf: Leaving directory '.'
> cd /usr/src/collectd-4.10.9 && ./configure --prefix=/usr --localstatedir=/var \
> 	--disable-{apple_sensors,csv,ipvs,mbmon,memcached,mysql} \
> 	--disable-{netlink,nginx,nut,perl,serial,snmp,tape,vserver,xmms} \
> 	--disable-{perl,serial,snmp,tape,vserver,xmms} \
> 	--enable-{apcups,battery,cpu{,freq},df,disk,dns,email,entropy,exec,hddtemp} \
> 	--enable-{interface,iptables,irq,load,logfile,memory,multimeter} \
> 	--enable-{network,nfs,ntpd,ping,processes,rrdtool,sensors,swap,syslog} \
> 	--enable-{tcpconns,unixsock,users,wireless} \
> 	--with-librrd=/usr/share/rrdtool-1.2.30
> checking build system type... x86_64-pc-linux-gnu
> checking host system type... x86_64-pc-linux-gnu
> checking how to print strings... printf
> checking for gcc... gcc
> checking whether the C compiler works... yes
> checking for C compiler default output file name... a.out
> checking for suffix of executables...
> checking whether we are cross compiling... no
> checking for suffix of object files... o
> checking whether the compiler supports GNU C... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to enable C11 features... none needed
> checking whether gcc understands -c and -o together... yes
> checking for a sed that does not truncate output... /bin/sed
> checking for grep that handles long lines and -e... /bin/grep
> checking for egrep... /bin/grep -E
> checking for fgrep... /bin/grep -F
> checking for ld used by gcc... /usr/bin/ld
> checking if the linker (/usr/bin/ld) is GNU ld... yes
> checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
> checking the name lister (/usr/bin/nm -B) interface... BSD nm
> checking whether ln -s works... yes
> checking the maximum length of command line arguments... 1572864
> checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
> checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
> checking for /usr/bin/ld option to reload object files... -r
> checking for objdump... objdump
> checking how to recognize dependent libraries... pass_all
> checking for dlltool... no
> checking how to associate runtime and link libraries... printf %s\n
> checking for ar... ar
> checking for archiver @FILE support... @
> checking for strip... strip
> checking for ranlib... ranlib
> checking for gawk... gawk
> checking command to parse /usr/bin/nm -B output from gcc object... ok
> checking for sysroot... no
> checking for a working dd... /bin/dd
> checking how to truncate binary pipes... /bin/dd bs=4096 count=1
> checking for mt... no
> checking if : is a manifest tool... no
> checking for stdio.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for strings.h... yes
> checking for sys/stat.h... yes
> checking for sys/types.h... yes
> checking for unistd.h... yes
> checking for sys/time.h... yes
> checking for dlfcn.h... yes
> checking for objdir... .libs
> checking if gcc supports -fno-rtti -fno-exceptions... no
> checking for gcc option to produce PIC... -fPIC -DPIC
> checking if gcc PIC flag -fPIC -DPIC works... yes
> checking if gcc static flag -static works... yes
> checking if gcc supports -c -o file.o... yes
> checking if gcc supports -c -o file.o... (cached) yes
> checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
> checking whether -lc should be explicitly linked in... no
> checking dynamic linker characteristics... GNU/Linux ld.so
> checking how to hardcode library paths into programs... immediate
> checking for shl_load... no
> checking for shl_load in -ldld... no
> checking for dlopen... no
> checking for dlopen in -ldl... yes
> checking whether a program can dlopen itself... yes
> checking whether a statically linked program can dlopen itself... no
> checking whether stripping libraries is possible... yes
> checking if libtool supports shared libraries... yes
> checking whether to build shared libraries... yes
> checking whether to build static libraries... yes
> checking for gcc options needed to detect all undeclared functions... none needed
> checking what extension is used for runtime loadable modules... .so
> checking what variable specifies run-time module search path... LD_LIBRARY_PATH
> checking for the default library search path... /lib /usr/lib /usr/lib/sasl2
> checking for library containing dlopen... -ldl
> checking for dlerror... yes
> checking for shl_load... (cached) no
> checking for shl_load in -ldld... (cached) no
> checking for dld_link in -ldld... no
> checking for _ prefix in compiled symbols... no
> checking whether deplibs are loaded by dlopen... yes
> checking for argz.h... yes
> checking for error_t... yes
> checking for argz_add... yes
> checking for argz_append... yes
> checking for argz_count... yes
> checking for argz_create_sep... yes
> checking for argz_insert... yes
> checking for argz_next... yes
> checking for argz_stringify... yes
> checking if argz actually works... yes
> checking whether libtool supports -dlopen/-dlpreopen... yes
> checking for ltdl.h... yes
> checking whether lt_dlinterface_register is declared... yes
> checking for lt_dladvise_preload in -lltdl... yes
> checking where to find libltdl headers...
> checking where to find libltdl library... -lltdl
> checking for unistd.h... (cached) yes
> checking for dl.h... no
> checking for sys/dl.h... no
> checking for dld.h... no
> checking for mach-o/dyld.h... no
> checking for dirent.h... yes
> checking for closedir... yes
> checking for opendir... yes
> checking for readdir... yes
> checking for strlcat... no
> checking for strlcpy... no
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking for a race-free mkdir -p... /bin/mkdir -p
> checking whether make sets $(MAKE)... yes
> checking whether make supports the include directive... yes (GNU style)
> checking whether make supports nested variables... yes
> checking dependency style of gcc... gcc3
> checking for special C compiler options needed for large files... no
> checking for _FILE_OFFSET_BITS value needed for large files... no
> checking for gcc... (cached) gcc
> checking whether the compiler supports GNU C... (cached) yes
> checking whether gcc accepts -g... (cached) yes
> checking for gcc option to enable C11 features... (cached) none needed
> checking whether gcc understands -c and -o together... (cached) yes
> checking how to run the C preprocessor... gcc -E
> checking whether ln -s works... yes
> checking whether make sets $(MAKE)... (cached) yes
> checking for flex... flex
> checking for lex output file root... lex.yy
> checking for lex library... none needed
> checking for library containing yywrap... -ll
> checking whether yytext is a pointer... yes
> checking for bison... bison -y
> checking for pkg-config... /usr/bin/pkg-config
> checking pkg-config is at least version 0.9.0... yes
> checking for protoc-c... no
> checking for kernel type (linux-gnu)... Linux
> checking for egrep... (cached) /bin/grep -E
> checking for sys/wait.h that is POSIX.1 compatible... yes
> checking for dirent.h that defines DIR... yes
> checking for library containing opendir... none required
> checking for _Bool... yes
> checking for stdbool.h that conforms to C99... yes
> checking for stdio.h... (cached) yes
> checking for errno.h... yes
> checking for math.h... yes
> checking for stdarg.h... yes
> checking for syslog.h... yes
> checking for fcntl.h... yes
> checking for signal.h... yes
> checking for assert.h... yes
> checking for sys/types.h... (cached) yes
> checking for sys/socket.h... yes
> checking for sys/select.h... yes
> checking for poll.h... yes
> checking for netdb.h... yes
> checking for arpa/inet.h... yes
> checking for sys/resource.h... yes
> checking for sys/param.h... yes
> checking for kstat.h... no
> checking for regex.h... yes
> checking for sys/ioctl.h... yes
> checking for endian.h... yes
> checking for sys/isa_defs.h... no
> checking for netinet/in_systm.h... yes
> checking for netinet/in.h... yes
> checking for netinet/ip.h... yes
> checking for netinet/ip_icmp.h... yes
> checking for netinet/ip_var.h... no
> checking for netinet/ip6.h... yes
> checking for netinet/icmp6.h... yes
> checking for netinet/tcp.h... yes
> checking for netinet/udp.h... yes
> checking for sys/dkstat.h... no
> checking for sys/sysctl.h... no
> checking for sysctl kern.cp_times... no
> checking for linux/major.h... yes
> checking for libgen.h... yes
> checking for IOKit/ps/IOPowerSources.h... no
> checking for linux/wireless.h... yes
> checking for sys/swap.h... yes
> checking for vm/anon.h... no
> checking for sys/loadavg.h... no
> checking for linux/config.h... no
> checking for utmp.h... yes
> checking for utmpx.h... yes
> checking for ifaddrs.h... yes
> checking for net/if.h... yes
> checking for linux/if.h... yes
> checking for linux/netdevice.h... yes
> checking for linux/ip_vs.h... yes
> checking for net/ip_vs.h... no
> checking for ip_vs.h... no
> checking for sys/ucred.h... no
> checking for sys/mount.h... yes
> checking for linux/un.h... yes
> checking for pwd.h... yes
> checking for grp.h... yes
> checking for sys/un.h... yes
> checking for ctype.h... yes
> checking for limits.h... yes
> checking for xfs/xqm.h... yes
> checking for fs_info.h... no
> checking for fshelp.h... no
> checking for paths.h... yes
> checking for mntent.h... yes
> checking for mnttab.h... no
> checking for sys/fstyp.h... no
> checking for sys/fs_types.h... no
> checking for sys/mntent.h... no
> checking for sys/mnttab.h... no
> checking for sys/statfs.h... yes
> checking for sys/statvfs.h... yes
> checking for sys/vfs.h... yes
> checking for sys/vfstab.h... no
> checking for kvm.h... no
> checking for wordexp.h... yes
> checking for arpa/nameser.h... yes
> checking for arpa/nameser_compat.h... yes
> checking for net/if_arp.h... yes
> checking for net/ppp_defs.h... yes
> checking for net/if_ppp.h... yes
> checking for netinet/if_ether.h... yes
> checking for termios.h... yes
> checking for an ANSI C-conforming const... yes
> checking for pid_t... yes
> checking for size_t... yes
> checking for uid_t in sys/types.h... yes
> checking whether gcc needs -traditional... no
> checking for gettimeofday... yes
> checking for select... yes
> checking for strdup... yes
> checking for strtol... yes
> checking for getaddrinfo... yes
> checking for getnameinfo... yes
> checking for strchr... yes
> checking for memcpy... yes
> checking for strstr... yes
> checking for strcmp... yes
> checking for strncmp... yes
> checking for strncpy... yes
> checking for strlen... yes
> checking for strncasecmp... yes
> checking for strcasecmp... yes
> checking for openlog... yes
> checking for closelog... yes
> checking for sysconf... yes
> checking for setenv... yes
> checking for if_indextoname... yes
> checking whether strerror_r is declared... yes
> checking whether strerror_r returns char *... no
> checking for strtok_r... yes
> checking for getpwnam_r... yes
> checking for getgrnam_r... yes
> checking for setgroups... yes
> checking for regcomp... yes
> checking for regerror... yes
> checking for regexec... yes
> checking for regfree... yes
> checking for socket... yes
> checking for nanosleep... yes
> checking for sysctl... no
> checking for sysctlbyname... no
> checking for host_statistics... no
> checking for processor_info... no
> checking for thread_info... no
> checking for statfs... yes
> checking for statvfs... yes
> checking for getifaddrs... yes
> checking for syslog... yes
> checking for getutent... yes
> checking for getutxent... yes
> checking for swapctl... no
> checking for getloadavg... yes
> checking whether NAN is defined by default... yes
> checking if doubles are stored in x86 representation... ./configure: line 15649: ac_fn_c_try_run: command not found
> no
> checking if endianflip converts to x86 representation... ./configure: line 15733: ac_fn_c_try_run: command not found
> no
> checking if intswap converts to x86 representation... ./configure: line 15811: ac_fn_c_try_run: command not found
> no
> configure: error: Didn't find out how doubles are stored in memory. Sorry.
> make: *** [collectd:112: /usr/src/log/collectd-4.10.9] Error 1