From: Michael Tremer <michael.tremer@ipfire.org>
To: Adolf Belka <adolf.belka@ipfire.org>
Cc: "IPFire: Development-List" <development@lists.ipfire.org>
Subject: Re: [FAILED] Nightly Build of next (18b67ef) for x86_64 on x86-01.haj.ipfire.org
Date: Sun, 31 Aug 2025 12:19:40 +0100 [thread overview]
Message-ID: <4FE4C153-E8A7-4D99-BF18-A60A588B1F0A@ipfire.org> (raw)
In-Reply-To: <e1a1f168-6ec3-4d09-b692-a49216e5024f@ipfire.org>
Hello Adolf,
I just pushed a commit with an updated hash:
https://git.ipfire.org/?p=ipfire-2.x.git;a=commitdiff;h=df79229e7f6f59b5799ee69a944b812a5002c0cb
The tarballs for fireinfo are getting automatically created from Git whenever I push a tag. I did exactly that now and the build should now run through.
Best,
-Michael
> On 30 Aug 2025, at 22:08, Adolf Belka <adolf.belka@ipfire.org> wrote:
>
> Hi Michael,
>
> I saw that the fireinfo build was failing even though I had done the uploadsrc with make.sh but I now see that for fireinfo it looks for the tarball not in source-2.x which is where my uploadsrc command puts it in but in
>
> /pub/mirror/full/releases/fireinfo/
>
> where I don't have the permissions to upload the tarball too.
>
> The tarball I created with the patches built in is uploaded into /pub/sources/source-2.x/ but you will need to copy it across into /pub/mirror/full/releases/fireinfo/
>
> Regards,
>
> Adolf
>
> On 30/08/2025 21:21, IPFire Nightly Builder wrote:
>> https://nightly.ipfire.org/next/2025-08-30%2017%3A50%3A21%20%2B0000-18b67efc/x86_64
>> commit 18b67efc6fc7414ab7a2d4865357e70c0b1da314
>> Author: Adolf Belka <adolf.belka@ipfire.org>
>> Date: Sat Aug 30 15:32:42 2025 +0200
>> core198: Ship fireinfo
>> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
>> Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
>> https://git.ipfire.org/?p=ipfire-2.x.git;a=shortlog;h=18b67efc6fc7414ab7a2d4865357e70c0b1da314
>> Packaged toolchain compilation
>> Building IPFire
>> stage2 [ 1 ][ DONE ]
>> linux (6.12.41) HEADERS=1 [ 24 ][ DONE ]
>> man-pages (6.14) [ 9 ][ DONE ]
>> glibc (2.42) [ 3:54 ][ DONE ]
>> tzdata (2025b) [ 3 ][ DONE ]
>> cleanup-toolchain [ 0 ][ DONE ]
>> zlib-ng (2.2.5) [ 18 ][ DONE ]
>> zstd (1.5.7) [ 2 ][ DONE ]
>> autoconf (2.72) [ 2 ][ DONE ]
>> autoconf-archive (2024.10.16) [ 3 ][ DONE ]
>> automake (1.18.1) [ 3 ][ DONE ]
>> help2man (1.49.3) [ 1 ][ DONE ]
>> libtool (2.5.4) [ 8 ][ DONE ]
>> binutils (2.45) [ 47 ][ DONE ]
>> gmp (6.3.0) [ 29 ][ DONE ]
>> mpfr (4.2.2) [ 13 ][ DONE ]
>> libmpc (1.3.1) [ 6 ][ DONE ]
>> pkg-config (0.29.2) [ 27 ][ DONE ]
>> libxcrypt (4.4.38) [ 18 ][ DONE ]
>> file (5.45) [ 9 ][ DONE ]
>> gcc (15.2.0) [ 5:53 ][ DONE ]
>> attr (2.5.2) [ 6 ][ DONE ]
>> acl (2.3.2) [ 11 ][ DONE ]
>> sed (4.9) [ 32 ][ DONE ]
>> berkeley (5.3.28) [ 28 ][ DONE ]
>> coreutils (9.7) [ 1:30 ][ DONE ]
>> iana-etc (20250505) [ 0 ][ DONE ]
>> m4 (1.4.20) [ 53 ][ DONE ]
>> bison (3.8.2) [ 40 ][ DONE ]
>> ncurses (6.5) [ 36 ][ DONE ]
>> perl (5.36.0) [ 2:29 ][ DONE ]
>> readline (8.3) [ 9 ][ DONE ]
>> bzip2 (1.0.8) [ 2 ][ DONE ]
>> xz (5.8.1) [ 15 ][ DONE ]
>> lzip (1.24.1) [ 1 ][ DONE ]
>> pcre (8.45) [ 9 ][ DONE ]
>> pcre2 (10.45) [ 8 ][ DONE ]
>> gettext (0.26) [ 4:35 ][ DONE ]
>> bash (5.3) [ 38 ][ DONE ]
>> diffutils (3.12) [ 47 ][ DONE ]
>> ed (1.20.2) [ 1 ][ DONE ]
>> findutils (4.10.0) [ 53 ][ DONE ]
>> flex (2.6.4) [ 10 ][ DONE ]
>> gawk (5.3.2) [ 19 ][ DONE ]
>> go (1.20.4) [ 26 ][ DONE ]
>> grep (3.12) [ 45 ][ DONE ]
>> groff (1.23.0) [ 49 ][ DONE ]
>> gperf (3.3) [ 15 ][ DONE ]
>> gzip (1.14) [ 25 ][ DONE ]
>> hostname (3.20) [ 1 ][ DONE ]
>> whois (5.6.4) [ 0 ][ DONE ]
>> kbd (2.8.0) [ 16 ][ DONE ]
>> less (678) [ 6 ][ DONE ]
>> procps (4.0.5) [ 24 ][ DONE ]
>> make (4.4.1) [ 18 ][ DONE ]
>> libpipeline (1.5.8) [ 29 ][ DONE ]
>> man (2.13.1) [ 1:18 ][ DONE ]
>> net-tools (2.10) [ 3 ][ DONE ]
>> patch (2.8) [ 31 ][ DONE ]
>> psmisc (23.7) [ 8 ][ DONE ]
>> shadow (4.18.0) [ 16 ][ DONE ]
>> sysklogd (1.5.1) [ 0 ][ DONE ]
>> sysvinit (3.11) [ 1 ][ DONE ]
>> tar (1.35) [ 58 ][ DONE ]
>> texinfo (7.2) [ 51 ][ DONE ]
>> util-linux (2.41.1) [ 35 ][ DONE ]
>> vim (9.1.1406) [ 19 ][ DONE ]
>> e2fsprogs (1.47.3) [ 19 ][ DONE ]
>> jq (1.8.1) [ 13 ][ DONE ]
>> configroot [ 1 ][ DONE ]
>> initscripts [ 1 ][ DONE ]
>> backup [ 1 ][ DONE ]
>> rust (1.83.0) [ 20 ][ DONE ]
>> openssl (3.5.1) [ 3:57 ][ DONE ]
>> popt (1.19) [ 6 ][ DONE ]
>> libedit (20250104-3.1) [ 9 ][ DONE ]
>> expat (2.7.1) [ 8 ][ DONE ]
>> libffi (3.5.1) [ 8 ][ DONE ]
>> gdbm (1.26) [ 17 ][ DONE ]
>> sqlite (3500400) [ 1:01 ][ DONE ]
>> python3 (3.10.8) [ 1:06 ][ DONE ]
>> python3-setuptools (67.5.1) [ 4 ][ DONE ]
>> ninja (1.12.1) [ 5 ][ DONE ]
>> meson (1.9.0) [ 3 ][ DONE ]
>> pam (1.7.1) [ 9 ][ DONE ]
>> libcap (2.76) [ 3 ][ DONE ]
>> libcap-ng (0.8.5) [ 6 ][ DONE ]
>> libpcap (1.10.5) [ 7 ][ DONE ]
>> ppp (2.5.2) [ 22 ][ DONE ]
>> pptp (1.10.0) [ 0 ][ DONE ]
>> unzip (60) [ 3 ][ DONE ]
>> which (2.23) [ 4 ][ DONE ]
>> bc (1.08.1) [ 4 ][ DONE ]
>> cpio (2.15) [ 37 ][ DONE ]
>> libaio (0.3.113) [ 0 ][ DONE ]
>> freetype (2.13.3) [ 6 ][ DONE ]
>> libmnl (1.0.5) [ 4 ][ DONE ]
>> libnfnetlink (1.0.2) [ 5 ][ DONE ]
>> libnetfilter_queue (1.0.5) [ 4 ][ DONE ]
>> libnetfilter_conntrack (1.1.0) [ 5 ][ DONE ]
>> libnetfilter_cthelper (1.0.1) [ 4 ][ DONE ]
>> libnetfilter_cttimeout (1.0.1) [ 4 ][ DONE ]
>> iptables (1.8.11) [ 8 ][ DONE ]
>> iproute2 (6.15.0) [ 3 ][ DONE ]
>> screen (5.0.1) [ 7 ][ DONE ]
>> elfutils (0.193) [ 15 ][ DONE ]
>> libconfig (1.8) [ 22 ][ DONE ]
>> curl (8.15.0) [ 32 ][ DONE ]
>> libarchive (3.8.0) [ 33 ][ DONE ]
>> cmake (4.0.2) [ 1:42 ][ DONE ]
>> json-c (0.18) [ 11 ][ DONE ]
>> tcl (8.6.14) [ 39 ][ DONE ]
>> python3-MarkupSafe (2.1.3) [ 1 ][ DONE ]
>> python3-Jinja2 (3.1.2) [ 2 ][ DONE ]
>> kmod (34.2) [ 3 ][ DONE ]
>> udev (254) [ 21 ][ DONE ]
>> libusb (1.0.29) [ 7 ][ DONE ]
>> mdadm (4.4) [ 1 ][ DONE ]
>> dracut (056) [ 2 ][ DONE ]
>> lvm2 (2.03.33) [ 15 ][ DONE ]
>> multipath-tools (0.8.9) [ 1 ][ DONE ]
>> glib (2.83.0) [ 28 ][ DONE ]
>> json-glib (1.10.6) [ 3 ][ DONE ]
>> libgudev (238) [ 3 ][ DONE ]
>> libgpg-error (1.54) [ 16 ][ DONE ]
>> libgcrypt (1.11.2) [ 19 ][ DONE ]
>> libassuan (3.0.1) [ 10 ][ DONE ]
>> nettle (3.10.2) [ 11 ][ DONE ]
>> libsodium (1.0.20) [ 19 ][ DONE ]
>> libevent2 (2.1.12-stable) [ 16 ][ DONE ]
>> apr (1.7.6) [ 27 ][ DONE ]
>> aprutil (1.6.3) [ 5 ][ DONE ]
>> unbound (1.23.1) [ 28 ][ DONE ]
>> libtasn1 (4.20.0) [ 20 ][ DONE ]
>> libunistring (1.3) [ 1:18 ][ DONE ]
>> gnutls (3.8.10) [ 1:17 ][ DONE ]
>> libuv (1.49.2) [ 12 ][ DONE ]
>> liburcu (0.15.1) [ 16 ][ DONE ]
>> bind (9.20.12) [ 30 ][ DONE ]
>> dhcp (4.4.3-P1) [ 44 ][ DONE ]
>> dhcpcd (10.2.4) [ 3 ][ DONE ]
>> boost (1_88_0) [ 4:53 ][ DONE ]
>> linux-atm (2.5.2) [ 21 ][ DONE ]
>> libqmi (1.34.0) [ 7 ][ DONE ]
>> c-ares (1.34.3) [ 20 ][ DONE ]
>> rust-dissimilar (1.0.3) [ 1 ][ DONE ]
>> rust-cfg-if (1.0.0) [ 1 ][ DONE ]
>> rust-libc (0.2.108) [ 2 ][ DONE ]
>> rust-getrandom (0.2.4) [ 2 ][ DONE ]
>> rust-typenum (1.15.0) [ 2 ][ DONE ]
>> rust-version-check (0.9.4) [ 2 ][ DONE ]
>> rust-generic-array (0.14.4) [ 3 ][ DONE ]
>> rust-crypto-common (0.1.1) [ 3 ][ DONE ]
>> rust-cipher (0.3.0) [ 3 ][ DONE ]
>> rust-hex (0.4.3) [ 1 ][ DONE ]
>> rust-unicode-xid (0.2.1) [ 0 ][ DONE ]
>> rust-unicode-ident (1.0.14) [ 1 ][ DONE ]
>> rust-proc-macro2 (1.0.92) [ 4 ][ DONE ]
>> rust-quote (1.0.37) [ 3 ][ DONE ]
>> rust-syn-1.0.109 (1.0.109) [ 12 ][ DONE ]
>> rust-syn (2.0.90) [ 12 ][ DONE ]
>> rust-home (0.5.3) [ 1 ][ DONE ]
>> rust-lazy-static (1.4.0) [ 0 ][ DONE ]
>> rust-memchr (2.7.4) [ 3 ][ DONE ]
>> rust-aho-corasick (0.7.18) [ 5 ][ DONE ]
>> rust-regex-syntax (0.6.25) [ 7 ][ DONE ]
>> rust-regex (1.5.3) [ 16 ][ DONE ]
>> rust-ucd-trie (0.1.3) [ 1 ][ DONE ]
>> rust-pest (2.1.3) [ 2 ][ DONE ]
>> rust-semver-parser (0.7.0) [ 1 ][ DONE ]
>> rust-semver (0.9.0) [ 1 ][ DONE ]
>> rust-same-file (1.0.6) [ 1 ][ DONE ]
>> rust-walkdir (2.3.2) [ 1 ][ DONE ]
>> rust-dirs (1.0.5) [ 2 ][ DONE ]
>> rust-toolchain_find (0.1.4) [ 11 ][ DONE ]
>> rust-serde_derive (1.0.216) [ 23 ][ DONE ]
>> rust-serde (1.0.216) [ 4 ][ DONE ]
>> rust-itoa (1.0.1) [ 1 ][ DONE ]
>> rust-ryu (1.0.9) [ 1 ][ DONE ]
>> rust-serde_json (1.0.133) [ 7 ][ DONE ]
>> rust-synstructure (0.13.1) [ 13 ][ DONE ]
>> rust-block-buffer (0.9.0) [ 2 ][ DONE ]
>> rust-digest (0.9.0) [ 3 ][ DONE ]
>> rust-ppv-lite86 (0.2.16) [ 1 ][ DONE ]
>> rust-rand_core (0.6.3) [ 0 ][ DONE ]
>> rust-rand_core-0.4.2 (0.4.2) [ 1 ][ DONE ]
>> rust-rand_core-0.3.1 (0.3.1) [ 1 ][ DONE ]
>> rust-rand_chacha (0.3.1) [ 1 ][ DONE ]
>> rust-rand_hc (0.3.1) [ 1 ][ DONE ]
>> rust-rand (0.8.4) [ 3 ][ DONE ]
>> rust-rdrand (0.4.0) [ 1 ][ DONE ]
>> rust-rand-0.4 (0.4.6) [ 3 ][ DONE ]
>> rust-log (0.4.14) [ 1 ][ DONE ]
>> rust-num_cpus (1.13.1) [ 2 ][ DONE ]
>> rust-crossbeam-utils (0.8.6) [ 1 ][ DONE ]
>> rust-autocfg (1.0.1) [ 1 ][ DONE ]
>> rust-memoffset (0.6.5) [ 2 ][ DONE ]
>> rust-scopeguard (1.1.0) [ 1 ][ DONE ]
>> rust-crossbeam-epoch (0.9.6) [ 2 ][ DONE ]
>> rust-crossbeam-deque (0.8.1) [ 2 ][ DONE ]
>> rust-either (1.6.1) [ 0 ][ DONE ]
>> rust-crossbeam-channel (0.5.2) [ 2 ][ DONE ]
>> rust-rayon-core (1.9.1) [ 5 ][ DONE ]
>> rust-rayon (1.5.1) [ 5 ][ DONE ]
>> rust-remove_dir_all (0.5.3) [ 0 ][ DONE ]
>> rust-tempdir (0.3.7) [ 2 ][ DONE ]
>> rust-glob (0.3.0) [ 2 ][ DONE ]
>> rust-once_cell (1.9.0) [ 1 ][ DONE ]
>> rust-termcolor (1.1.2) [ 1 ][ DONE ]
>> rust-serde_spanned (0.6.8) [ 0 ][ DONE ]
>> rust-toml_datetime (0.6.8) [ 1 ][ DONE ]
>> rust-equivalent (1.0.1) [ 1 ][ DONE ]
>> rust-allocator-api2 (0.2.21) [ 1 ][ DONE ]
>> rust-foldhash (0.1.3) [ 0 ][ DONE ]
>> rust-hashbrown (0.15.2) [ 2 ][ DONE ]
>> rust-indexmap (2.7.0) [ 2 ][ DONE ]
>> rust-winnow (0.6.20) [ 3 ][ DONE ]
>> rust-toml_edit (0.22.22) [ 14 ][ DONE ]
>> rust-toml (0.8.19) [ 15 ][ DONE ]
>> rust-target-triple (0.1.3) [ 1 ][ DONE ]
>> rust-trybuild (1.0.101) [ 38 ][ DONE ]
>> rust-unindent (0.1.11) [ 1 ][ DONE ]
>> rust-proc-macro-hack (0.5.19) [ 3 ][ DONE ]
>> rust-indoc-impl (0.3.7) [ 11 ][ DONE ]
>> rust-indoc-impl-0.3.6 (0.3.6) [ 11 ][ DONE ]
>> rust-indoc (1.0.3) [ 2 ][ DONE ]
>> rust-indoc-0.3.6 (0.3.6) [ 11 ][ DONE ]
>> rust-instant (0.1.12) [ 1 ][ DONE ]
>> rust-lock_api (0.4.5) [ 1 ][ DONE ]
>> rust-smallvec (1.8.0) [ 1 ][ DONE ]
>> rust-parking_lot_core (0.8.5) [ 1 ][ DONE ]
>> rust-parking_lot (0.11.2) [ 3 ][ DONE ]
>> rust-paste-impl (0.1.18) [ 4 ][ DONE ]
>> rust-paste (1.0.3) [ 2 ][ DONE ]
>> rust-paste-0.1.18 (0.1.18) [ 5 ][ DONE ]
>> rust-ctor (0.2.9) [ 20 ][ DONE ]
>> rust-ghost (0.1.2) [ 12 ][ DONE ]
>> rust-inventory-impl (0.1.11) [ 11 ][ DONE ]
>> rust-inventory (0.3.15) [ 1 ][ DONE ]
>> rust-pyo3-build-config (0.15.2) [ 5 ][ DONE ]
>> rust-pyo3-macros-backend (0.15.2) [ 21 ][ DONE ]
>> rust-pyo3-macros (0.15.2) [ 25 ][ DONE ]
>> rust-pyo3 (0.15.2) [ 31 ][ DONE ]
>> rust-num-traits (0.2.15) [ 2 ][ DONE ]
>> rust-num-integer (0.1.45) [ 3 ][ DONE ]
>> rust-num_threads (0.1.5) [ 0 ][ DONE ]
>> rust-time (0.1.43) [ 2 ][ DONE ]
>> rust-iana-time-zone (0.1.51) [ 1 ][ DONE ]
>> rust-chrono (0.4.22) [ 6 ][ DONE ]
>> rust-asn1_derive (0.12.2) [ 14 ][ DONE ]
>> rust-asn1 (0.12.2) [ 15 ][ DONE ]
>> rust-proc-macro-error-attr (1.0.4) [ 4 ][ DONE ]
>> rust-proc-macro-error (1.0.4) [ 5 ][ DONE ]
>> rust-Inflector (0.11.4) [ 12 ][ DONE ]
>> rust-ouroboros_macro (0.15.5) [ 25 ][ DONE ]
>> rust-aliasable (0.1.3) [ 0 ][ DONE ]
>> rust-stable_deref_trait (1.2.0) [ 0 ][ DONE ]
>> rust-ouroboros (0.15.5) [ 26 ][ DONE ]
>> rust-base64 (0.13.0) [ 1 ][ DONE ]
>> rust-pem (1.1.0) [ 1 ][ DONE ]
>> gdb (16.1) [ 1:21 ][ DONE ]
>> grub (0e36779-bootstrapped) [ 2:28 ][ DONE ]
>> mandoc (1.14.6) [ 4 ][ DONE ]
>> efivar (38) [ 1 ][ DONE ]
>> efibootmgr (18) [ 1 ][ DONE ]
>> p11-kit (0.25.5) [ 12 ][ DONE ]
>> ca-certificates (20250317) [ 4 ][ DONE ]
>> fireinfo (2.2.1)
>> -> written as 'FIRMAPROFESIONAL_CA_ROOT-A_WEB:2.16.49.151.33.237.175.137.66.127.53.65.135.161.103.86.76.109.tmp-p11-kit', trust = ['CKA_TRUST_SERVER_AUTH'], openssl-trust = ['serverAuth'], distrust = [], openssl-distrust = []
>> producing trust for "TWCA CYBER Root CA"2.16.64.1.52.140.194.0.0.0.0.0.0.0.1.60.242.198
>> -> written as 'TWCA_CYBER_Root_CA:2.16.64.1.52.140.194.0.0.0.0.0.0.0.1.60.242.198.tmp-p11-kit', trust = ['CKA_TRUST_SERVER_AUTH'], openssl-trust = ['serverAuth'], distrust = [], openssl-distrust = []
>> producing trust for "TWCA Global Root CA G2"2.16.64.1.52.140.194.0.0.0.0.0.0.0.1.151.88.244
>> -> written as 'TWCA_Global_Root_CA_G2:2.16.64.1.52.140.194.0.0.0.0.0.0.0.1.151.88.244.tmp-p11-kit', trust = ['CKA_TRUST_EMAIL_PROTECTION'], openssl-trust = ['emailProtection'], distrust = [], openssl-distrust = []
>> producing trust for "SecureSign Root CA12"2.20.102.249.199.193.175.236.194.81.180.237.83.151.230.230.130.195.43.28.144.22
>> -> written as 'SecureSign_Root_CA12:2.20.102.249.199.193.175.236.194.81.180.237.83.151.230.230.130.195.43.28.144.22.tmp-p11-kit', trust = ['CKA_TRUST_SERVER_AUTH'], openssl-trust = ['serverAuth'], distrust = [], openssl-distrust = []
>> producing trust for "SecureSign Root CA14"2.20.100.219.90.12.32.78.232.215.41.119.200.80.39.162.90.39.221.45.242.203
>> -> written as 'SecureSign_Root_CA14:2.20.100.219.90.12.32.78.232.215.41.119.200.80.39.162.90.39.221.45.242.203.tmp-p11-kit', trust = ['CKA_TRUST_SERVER_AUTH'], openssl-trust = ['serverAuth'], distrust = [], openssl-distrust = []
>> producing trust for "SecureSign Root CA15"2.20.22.21.199.195.216.73.167.190.105.12.138.136.237.240.112.249.221.183.62.135
>> -> written as 'SecureSign_Root_CA15:2.20.22.21.199.195.216.73.167.190.105.12.138.136.237.240.112.249.221.183.62.135.tmp-p11-kit', trust = ['CKA_TRUST_SERVER_AUTH'], openssl-trust = ['serverAuth'], distrust = [], openssl-distrust = []
>> producing trust for "D-TRUST BR Root CA 2 2023"2.16.115.59.48.4.72.91.217.77.120.46.115.75.201.161.220.102
>> -> written as 'D-TRUST_BR_Root_CA_2_2023:2.16.115.59.48.4.72.91.217.77.120.46.115.75.201.161.220.102.tmp-p11-kit', trust = ['CKA_TRUST_SERVER_AUTH'], openssl-trust = ['serverAuth'], distrust = [], openssl-distrust = []
>> producing trust for "D-TRUST EV Root CA 2 2023"2.16.105.38.9.126.128.75.76.160.167.140.120.98.83.95.90.111
>> -> written as 'D-TRUST_EV_Root_CA_2_2023:2.16.105.38.9.126.128.75.76.160.167.140.120.98.83.95.90.111.tmp-p11-kit', trust = ['CKA_TRUST_SERVER_AUTH'], openssl-trust = ['serverAuth'], distrust = [], openssl-distrust = []
>> mkdir -pv /etc/ssl/certs
>> cd /usr/src/ca-certificates && install -p -m 644 ca-bundle.crt ca-bundle.trust.crt \
>> /etc/ssl/certs
>> ln -svf certs/ca-bundle.crt /etc/ssl/cert.pem
>> '/etc/ssl/cert.pem' -> 'certs/ca-bundle.crt'
>> Updating linker cache...
>> Install done; saving file list to /usr/src/log/ca-certificates ...
>> make: Leaving directory '/usr/src/lfs'
>> Aug 30 19:21:43: Building fireinfo make: Entering directory '/build/nightly/next/lfs'
>> -e Download: https://source.ipfire.org/releases/fireinfo//fireinfo-v2.2.1.tar.gz
>> https://source.ipfire.org/releases/fireinfo//fireinfo-v2.2.1.tar.gz:
>> 2025-08-30 19:21:43 ERROR 404: Not Found.
>> make: *** [fireinfo:61: /build/nightly/next/cache/fireinfo-v2.2.1.tar.gz] Error 8
>> make: Leaving directory '/build/nightly/next/lfs'
>> ERROR: Downloading fireinfo [ FAIL ]
>> Check /build/nightly/next/log_x86_64/_build.ipfire.log for errors if applicable[ FAIL ]
>
next prev parent reply other threads:[~2025-08-31 11:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4cDlPQ4dbmz2xFv@x86-01.haj.ipfire.org>
2025-08-30 21:08 ` Adolf Belka
2025-08-31 11:19 ` Michael Tremer [this message]
2025-09-01 10:01 ` Adolf Belka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FE4C153-E8A7-4D99-BF18-A60A588B1F0A@ipfire.org \
--to=michael.tremer@ipfire.org \
--cc=adolf.belka@ipfire.org \
--cc=development@lists.ipfire.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox