Failure attempting to enter 2.15 branch

Failure attempting to enter 2.15 branch

[R. W. Rodolico]

[-- Attachment #1: Type: text/plain, Size: 588 bytes --]

Hi all,

Sorry I've been out of pocket with some serious family issues and
haven't been testing.

I tried to do testing by upgrading my office router from 2.13-75
following the instructions at
http://wiki.ipfire.org/en/configuration/ipfire/pakfire/testing. However,
this produced no changes.

The instructions say to change the line in pakfire.conf to
$version = "2.13.1";
which I did, then did
pakfire update --force
Nothing happened.

Question? Should that be 2.15.1?

Rod
-- 
R. W. "Rod" Rodolico
Daily Data, Inc.
POB 140465
Dallas TX 75214-0465
http://www.dailydata.net
214.827.2170


[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: rodo.vcf --]
[-- Type: text/x-vcard, Size: 233 bytes --]

begin:vcard
fn:R. W. Rodolico
n:Rodolico;R. W.
org:Daily Data, Inc.
adr:;;POB 140465;Dallas;TX;75214-0465;US
email;internet:rodo@dailydata.net
title:President
tel;work:214.827.2170
url:http://www.dailydata.net
version:2.1
end:vcard

Re: Failure attempting to enter 2.15 branch

[Arne Fitzenreiter]

[-- Attachment #1: Type: text/plain, Size: 835 bytes --]

On 2014-04-01 20:33, R. W. Rodolico wrote:
> Hi all,
> 
> Sorry I've been out of pocket with some serious family issues and
> haven't been testing.
> 
> I tried to do testing by upgrading my office router from 2.13-75
> following the instructions at
> http://wiki.ipfire.org/en/configuration/ipfire/pakfire/testing. 
> However,
> this produced no changes.
> 
> The instructions say to change the line in pakfire.conf to
> $version = "2.13.1";
> which I did, then did
> pakfire update --force
> Nothing happened.
Nothing is not good. It should download the package lists as usual.

After this
pakfire upgrade
should to install. (Or go to the webif page that should show the update 
now.)

> 
> Question? Should that be 2.15.1?
No. 2.15 is the testing tree at the moment. The 2.15.1 will added soon 
but not exist yet.

Greetings,
Arne

Re: Failure attempting to enter 2.15 branch

[R. W. Rodolico]

[-- Attachment #1: Type: text/plain, Size: 1882 bytes --]

Following is transcript. If I need to do a full install, I will, but it
will take a little while.

Rod

[root(a)dd-router ~]# cat /opt/pakfire/db/core/mine
75
[root(a)dd-router ~]# cat /opt/pakfire/etc/pakfire.conf
...
package Conf;

$version = "2.13.1";
#$version = "2.13";

$mainserver = "pakfire.ipfire.org";
...

[root(a)dd-router ~]# pakfire update --force
server-list.db       100.00% |=============================>|   312.00 B
packages_list.db     100.00% |=============================>|    3.31 KB
core-list.db         100.00% |=============================>|   248.00 B
[root(a)dd-router ~]# pakfire upgrade
CORE ERROR: No new upgrades available. You are on release 75.


On 04/01/2014 02:28 PM, Arne Fitzenreiter wrote:
> On 2014-04-01 20:33, R. W. Rodolico wrote:
>> Hi all,
>>
>> Sorry I've been out of pocket with some serious family issues and
>> haven't been testing.
>>
>> I tried to do testing by upgrading my office router from 2.13-75
>> following the instructions at
>> http://wiki.ipfire.org/en/configuration/ipfire/pakfire/testing. However,
>> this produced no changes.
>>
>> The instructions say to change the line in pakfire.conf to
>> $version = "2.13.1";
>> which I did, then did
>> pakfire update --force
>> Nothing happened.
> Nothing is not good. It should download the package lists as usual.
> 
> After this
> pakfire upgrade
> should to install. (Or go to the webif page that should show the update
> now.)
> 
>>
>> Question? Should that be 2.15.1?
> No. 2.15 is the testing tree at the moment. The 2.15.1 will added soon
> but not exist yet.
> 
> Greetings,
> Arne
> 
> _______________________________________________
> Development mailing list
> Development(a)lists.ipfire.org
> http://lists.ipfire.org/mailman/listinfo/development

-- 
R. W. "Rod" Rodolico
Daily Data, Inc.
POB 140465
Dallas TX 75214-0465
http://www.dailydata.net
214.827.2170


[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: rodo.vcf --]
[-- Type: text/x-vcard, Size: 233 bytes --]

begin:vcard
fn:R. W. Rodolico
n:Rodolico;R. W.
org:Daily Data, Inc.
adr:;;POB 140465;Dallas;TX;75214-0465;US
email;internet:rodo@dailydata.net
title:President
tel;work:214.827.2170
url:http://www.dailydata.net
version:2.1
end:vcard

AW: Failure attempting to enter 2.15 branch

[Benjamin Hahn]

[-- Attachment #1: Type: text/plain, Size: 2327 bytes --]

Since you are attempting to upgrade to 2.15, you should put 
>> $version = "2.15";  <<
In your pakfire.conf ;)

2.13.1 is the testing tree for the 2.13 branch 

Greetings,
Benjamin 

-----Ursprüngliche Nachricht-----
Von: Development [mailto:development-bounces(a)lists.ipfire.org] Im Auftrag
von R. W. Rodolico
Gesendet: Dienstag, 1. April 2014 21:56
An: development(a)lists.ipfire.org
Betreff: Re: Failure attempting to enter 2.15 branch

Following is transcript. If I need to do a full install, I will, but it will
take a little while.

Rod

[root(a)dd-router ~]# cat /opt/pakfire/db/core/mine
75
[root(a)dd-router ~]# cat /opt/pakfire/etc/pakfire.conf ...
package Conf;

$version = "2.13.1";
#$version = "2.13";

$mainserver = "pakfire.ipfire.org";
...

[root(a)dd-router ~]# pakfire update --force
server-list.db       100.00% |=============================>|   312.00 B
packages_list.db     100.00% |=============================>|    3.31 KB
core-list.db         100.00% |=============================>|   248.00 B
[root(a)dd-router ~]# pakfire upgrade
CORE ERROR: No new upgrades available. You are on release 75.


On 04/01/2014 02:28 PM, Arne Fitzenreiter wrote:
> On 2014-04-01 20:33, R. W. Rodolico wrote:
>> Hi all,
>>
>> Sorry I've been out of pocket with some serious family issues and 
>> haven't been testing.
>>
>> I tried to do testing by upgrading my office router from 2.13-75 
>> following the instructions at 
>> http://wiki.ipfire.org/en/configuration/ipfire/pakfire/testing. 
>> However, this produced no changes.
>>
>> The instructions say to change the line in pakfire.conf to $version = 
>> "2.13.1"; which I did, then did pakfire update --force Nothing 
>> happened.
> Nothing is not good. It should download the package lists as usual.
> 
> After this
> pakfire upgrade
> should to install. (Or go to the webif page that should show the 
> update
> now.)
> 
>>
>> Question? Should that be 2.15.1?
> No. 2.15 is the testing tree at the moment. The 2.15.1 will added soon 
> but not exist yet.
> 
> Greetings,
> Arne
> 
> _______________________________________________
> Development mailing list
> Development(a)lists.ipfire.org
> http://lists.ipfire.org/mailman/listinfo/development

--
R. W. "Rod" Rodolico
Daily Data, Inc.
POB 140465
Dallas TX 75214-0465
http://www.dailydata.net
214.827.2170


[-- Attachment #2: smime.p7s --]
[-- Type: application/pkcs7-signature, Size: 6319 bytes --]

Re: AW: Failure attempting to enter 2.15 branch

[R. W. Rodolico]

[-- Attachment #1: Type: text/plain, Size: 2728 bytes --]

Thank you. It is now responding as I expected. I'll hopefully have some
time to do a few of the checklists

Rod

On 04/01/2014 03:12 PM, Benjamin Hahn wrote:
> Since you are attempting to upgrade to 2.15, you should put 
>>> $version = "2.15";  <<
> In your pakfire.conf ;)
> 
> 2.13.1 is the testing tree for the 2.13 branch 
> 
> Greetings,
> Benjamin 
> 
> -----Ursprüngliche Nachricht-----
> Von: Development [mailto:development-bounces(a)lists.ipfire.org] Im Auftrag
> von R. W. Rodolico
> Gesendet: Dienstag, 1. April 2014 21:56
> An: development(a)lists.ipfire.org
> Betreff: Re: Failure attempting to enter 2.15 branch
> 
> Following is transcript. If I need to do a full install, I will, but it will
> take a little while.
> 
> Rod
> 
> [root(a)dd-router ~]# cat /opt/pakfire/db/core/mine
> 75
> [root(a)dd-router ~]# cat /opt/pakfire/etc/pakfire.conf ...
> package Conf;
> 
> $version = "2.13.1";
> #$version = "2.13";
> 
> $mainserver = "pakfire.ipfire.org";
> ...
> 
> [root(a)dd-router ~]# pakfire update --force
> server-list.db       100.00% |=============================>|   312.00 B
> packages_list.db     100.00% |=============================>|    3.31 KB
> core-list.db         100.00% |=============================>|   248.00 B
> [root(a)dd-router ~]# pakfire upgrade
> CORE ERROR: No new upgrades available. You are on release 75.
> 
> 
> On 04/01/2014 02:28 PM, Arne Fitzenreiter wrote:
>> On 2014-04-01 20:33, R. W. Rodolico wrote:
>>> Hi all,
>>>
>>> Sorry I've been out of pocket with some serious family issues and 
>>> haven't been testing.
>>>
>>> I tried to do testing by upgrading my office router from 2.13-75 
>>> following the instructions at 
>>> http://wiki.ipfire.org/en/configuration/ipfire/pakfire/testing. 
>>> However, this produced no changes.
>>>
>>> The instructions say to change the line in pakfire.conf to $version = 
>>> "2.13.1"; which I did, then did pakfire update --force Nothing 
>>> happened.
>> Nothing is not good. It should download the package lists as usual.
>>
>> After this
>> pakfire upgrade
>> should to install. (Or go to the webif page that should show the 
>> update
>> now.)
>>
>>>
>>> Question? Should that be 2.15.1?
>> No. 2.15 is the testing tree at the moment. The 2.15.1 will added soon 
>> but not exist yet.
>>
>> Greetings,
>> Arne
>>
>> _______________________________________________
>> Development mailing list
>> Development(a)lists.ipfire.org
>> http://lists.ipfire.org/mailman/listinfo/development
> 
> --
> R. W. "Rod" Rodolico
> Daily Data, Inc.
> POB 140465
> Dallas TX 75214-0465
> http://www.dailydata.net
> 214.827.2170
> 

-- 
R. W. "Rod" Rodolico
Daily Data, Inc.
POB 140465
Dallas TX 75214-0465
http://www.dailydata.net
214.827.2170


[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: rodo.vcf --]
[-- Type: text/x-vcard, Size: 233 bytes --]

begin:vcard
fn:R. W. Rodolico
n:Rodolico;R. W.
org:Daily Data, Inc.
adr:;;POB 140465;Dallas;TX;75214-0465;US
email;internet:rodo@dailydata.net
title:President
tel;work:214.827.2170
url:http://www.dailydata.net
version:2.1
end:vcard

Great update!

[m.postman]

[-- Attachment #1: Type: text/plain, Size: 392 bytes --]

Hey everybody,
I just wanted to thank you very much!
 From endian firewall on xen I was habited that every update requires 
intensive work and always a lot of time.
...well I just enjoyed an update from release 72 to 75.
Quite sad that it only took 2 minutes and 5 clicks, I could have enjoyed 
it longer :)

You are doing a VERY GREAT JOB!
Thanks a lot!

Marc
(Hungry for more updates ;D )