Reviewed-by: Peter Müller > See: > https://github.com/PCRE2Project/pcre2/releases/tag/pcre2-10.41 > and > https://github.com/PCRE2Project/pcre2/releases/tag/pcre2-10.42 > > Excerpts from changelogs: > > "Version 10.41 06-December-2022 > ------------------------------ > > 1. Add fflush() before and after a fork callout in pcre2grep to get its output > to be the same on all systems. (There were previously ordering differences in > Alpine Linux). > > 2. Merged patch from @carenas (GitHub #110) for pthreads support in CMake. > > 3. SSF scorecards grumbled about possible overflow in an expression in > pcre2test. It never would have overflowed in practice, but some casts have been > added and at the some time there's been some tidying of fprints that output > size_t values. > > 4. PR #94 showed up an unused enum in pcre2_convert.c, which is now removed. > > 5. Minor code re-arrangement to remove gcc warning about realloc() in > pcre2test. > > 6. Change a number of int variables that hold buffer and line lengths in > pcre2grep to PCRE2_SIZE (aka size_t). > > 7. Added an #ifdef to cut out a call to PRIV(jit_free) when JIT is not > supported (even though that function would do nothing in that case) at the > request of a user who doesn't even want to link with pcre_jit_compile.o. Also > tidied up an untidy #ifdef arrangement in pcre2test. > > 8. Fixed an issue in the backtracking optimization of character repeats in > JIT. Furthermore optimize star repetitions, not just plus repetitions. > > 9. Removed the use of an initial backtracking frames vector on the system stack > in pcre2_match() so that it now always uses the heap. (In a multi-thread > environment with very small stacks there had been an issue.) This also is > tidier for JIT matching, which didn't need that vector. The heap vector is now > remembered in the match data block and re-used if that block itself is re-used. > It is freed with the match data block. > > 10. Adjusted the find_limits code in pcre2test to work with change 9 above. > > 11. Added find_limits_noheap to pcre2test, because the heap limits are now > different in different environments and so cannot be included in the standard > tests. > > 12. Created a test for pcre2_match() heap processing that is not part of the > tests run by 'make check', but can be run manually. The current output is from > a 64-bit system. > > 13. Implemented -Z aka --null in pcre2grep. > > 14. A minor change to pcre2test and the addition of several new pcre2grep tests > have improved LCOV coverage statistics. At the same time, code in pcre2grep and > elsewhere that can never be obeyed in normal testing has been excluded from > coverage. > > 15. Fixed a bug in pcre2grep that could cause an extra newline to be written > after output generaed by --output. > > 16. If a file has a .bz2 extension but is not in fact compressed, pcre2grep > should process it as a plain text file. A bug stopped this happening; now fixed > and added to the tests. > > 17. When pcre2grep was running not in UTF mode, if a string specified by > --output or obtained from a callout in a pattern contained a character (byte) > greater than 127, it was incorrectly output in UTF-8 format. > > 18. Added some casts after warnings from Clang sanitize. > > 19. Merged patch from cbouc (GitHub #139): 4 function prototypes were missing > PCRE2_CALL_CONVENTION in src/pcre2posix.h. All function prototypes returning > pointers had out of place PCRE2_CALL_CONVENTION in src/pcre2.h.*. These > produced errors when building for Windows with #define PCRE2_CALL_CONVENTION > __stdcall. > > 20. A negative repeat value in a pcre2test subject line was not being > diagnosed, leading to infinite looping. > > 21. Updated RunGrepTest to discard the warning that Bash now gives when setting > LC_CTYPE to a bad value (because older versions didn't). > > 22. Updated pcre2grep so that it behaves like GNU grep when matching more than > one pattern and a later pattern matches at an earlier point in the subject when > the matched substrings are being identified by colour or by offsets. > > 23. Updated the PrepareRelease script so that the man page that it makes for > the pcre2demo demonstration program is more standard and does not cause errors > when processed by lexgrog or mandb -c (GitHub issue #160). > > 24. The JIT compiler was updated." > > Version 10.42 11-December-2022 > ------------------------------ > > "This release is mainly to fix a problem with 10.41, which is broken for > programs that include pcre2posix.h but not pcre2.h. Some other minor fixes > are included. > > 1. Change 19 of 10.41 wasn't quite right; it put the definition of a default, > empty value for PCRE2_CALL_CONVENTION in src/pcre2posix.c instead of > src/pcre2posix.h, which meant that programs that included pcre2posix.h but not > pcre2.h failed to compile. > > 2. To catch similar issues to the above in future, a new small test program > that includes pcre2posix.h but not pcre2.h has been added to the test suite. > > 3. When the -S option of pcre2test was used to set a stack size greater than > the allowed maximum, the error message displayed the hard limit incorrectly. > This was pointed out on GitHub pull request #171, but the suggested patch > didn't cope with all cases. Some further modification was required. > > 4. Supplying an ovector count of more than 65535 to pcre2_match_data_create() > caused a crash because the field in the match data block is only 16 bits. A > maximum of 65535 is now silently applied. > > 5. Merged @carenas patch #175 which fixes #86 - segfault on aarch64 (ARM)," > > Signed-off-by: Matthias Fischer > --- > config/rootfiles/common/pcre2 | 226 +++++++++++++++++----------------- > lfs/pcre2 | 6 +- > 2 files changed, 116 insertions(+), 116 deletions(-) > > diff --git a/config/rootfiles/common/pcre2 b/config/rootfiles/common/pcre2 > index 716f23661..925efb675 100644 > --- a/config/rootfiles/common/pcre2 > +++ b/config/rootfiles/common/pcre2 > @@ -6,132 +6,132 @@ > #usr/lib/libpcre2-16.la > #usr/lib/libpcre2-16.so > usr/lib/libpcre2-16.so.0 > -usr/lib/libpcre2-16.so.0.11.0 > +usr/lib/libpcre2-16.so.0.11.2 > #usr/lib/libpcre2-32.la > #usr/lib/libpcre2-32.so > usr/lib/libpcre2-32.so.0 > -usr/lib/libpcre2-32.so.0.11.0 > +usr/lib/libpcre2-32.so.0.11.2 > #usr/lib/libpcre2-8.la > #usr/lib/libpcre2-8.so > usr/lib/libpcre2-8.so.0 > -usr/lib/libpcre2-8.so.0.11.0 > +usr/lib/libpcre2-8.so.0.11.2 > #usr/lib/libpcre2-posix.la > #usr/lib/libpcre2-posix.so > usr/lib/libpcre2-posix.so.3 > -usr/lib/libpcre2-posix.so.3.0.2 > +usr/lib/libpcre2-posix.so.3.0.4 > #usr/lib/pkgconfig/libpcre2-16.pc > #usr/lib/pkgconfig/libpcre2-32.pc > #usr/lib/pkgconfig/libpcre2-8.pc > #usr/lib/pkgconfig/libpcre2-posix.pc > -#usr/share/doc/pcre-pcre2-10.40 > -#usr/share/doc/pcre-pcre2-10.40/AUTHORS > -#usr/share/doc/pcre-pcre2-10.40/COPYING > -#usr/share/doc/pcre-pcre2-10.40/ChangeLog > -#usr/share/doc/pcre-pcre2-10.40/LICENCE > -#usr/share/doc/pcre-pcre2-10.40/NEWS > -#usr/share/doc/pcre-pcre2-10.40/README > -#usr/share/doc/pcre-pcre2-10.40/html > -#usr/share/doc/pcre-pcre2-10.40/html/NON-AUTOTOOLS-BUILD.txt > -#usr/share/doc/pcre-pcre2-10.40/html/README.txt > -#usr/share/doc/pcre-pcre2-10.40/html/index.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2-config.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_callout_enumerate.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_code_copy.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_code_copy_with_tables.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_code_free.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_compile.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_compile_context_copy.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_compile_context_create.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_compile_context_free.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_config.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_convert_context_copy.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_convert_context_create.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_convert_context_free.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_converted_pattern_free.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_dfa_match.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_general_context_copy.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_general_context_create.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_general_context_free.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_get_error_message.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_get_mark.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_get_match_data_size.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_get_ovector_count.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_get_ovector_pointer.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_get_startchar.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_jit_compile.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_jit_free_unused_memory.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_jit_match.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_jit_stack_assign.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_jit_stack_create.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_jit_stack_free.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_maketables.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_maketables_free.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_match.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_match_context_copy.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_match_context_create.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_match_context_free.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_match_data_create.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_match_data_create_from_pattern.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_match_data_free.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_pattern_convert.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_pattern_info.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_serialize_decode.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_serialize_encode.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_serialize_free.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_serialize_get_number_of_codes.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_set_bsr.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_set_callout.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_set_character_tables.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_set_compile_extra_options.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_set_compile_recursion_guard.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_set_depth_limit.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_set_glob_escape.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_set_glob_separator.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_set_heap_limit.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_set_match_limit.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_set_max_pattern_length.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_set_newline.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_set_offset_limit.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_set_parens_nest_limit.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_set_recursion_limit.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_set_recursion_memory_management.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_set_substitute_callout.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_substitute.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_substring_copy_byname.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_substring_copy_bynumber.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_substring_free.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_substring_get_byname.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_substring_get_bynumber.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_substring_length_byname.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_substring_length_bynumber.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_substring_list_free.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_substring_list_get.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_substring_nametable_scan.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2_substring_number_from_name.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2api.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2build.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2callout.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2compat.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2convert.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2demo.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2grep.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2jit.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2limits.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2matching.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2partial.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2pattern.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2perform.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2posix.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2sample.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2serialize.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2syntax.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2test.html > -#usr/share/doc/pcre-pcre2-10.40/html/pcre2unicode.html > -#usr/share/doc/pcre-pcre2-10.40/pcre2-config.txt > -#usr/share/doc/pcre-pcre2-10.40/pcre2.txt > -#usr/share/doc/pcre-pcre2-10.40/pcre2grep.txt > -#usr/share/doc/pcre-pcre2-10.40/pcre2test.txt > +#usr/share/doc/pcre-pcre2-10.42 > +#usr/share/doc/pcre-pcre2-10.42/AUTHORS > +#usr/share/doc/pcre-pcre2-10.42/COPYING > +#usr/share/doc/pcre-pcre2-10.42/ChangeLog > +#usr/share/doc/pcre-pcre2-10.42/LICENCE > +#usr/share/doc/pcre-pcre2-10.42/NEWS > +#usr/share/doc/pcre-pcre2-10.42/README > +#usr/share/doc/pcre-pcre2-10.42/html > +#usr/share/doc/pcre-pcre2-10.42/html/NON-AUTOTOOLS-BUILD.txt > +#usr/share/doc/pcre-pcre2-10.42/html/README.txt > +#usr/share/doc/pcre-pcre2-10.42/html/index.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2-config.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_callout_enumerate.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_code_copy.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_code_copy_with_tables.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_code_free.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_compile.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_compile_context_copy.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_compile_context_create.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_compile_context_free.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_config.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_convert_context_copy.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_convert_context_create.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_convert_context_free.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_converted_pattern_free.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_dfa_match.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_general_context_copy.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_general_context_create.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_general_context_free.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_get_error_message.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_get_mark.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_get_match_data_size.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_get_ovector_count.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_get_ovector_pointer.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_get_startchar.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_jit_compile.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_jit_free_unused_memory.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_jit_match.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_jit_stack_assign.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_jit_stack_create.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_jit_stack_free.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_maketables.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_maketables_free.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_match.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_match_context_copy.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_match_context_create.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_match_context_free.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_match_data_create.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_match_data_create_from_pattern.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_match_data_free.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_pattern_convert.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_pattern_info.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_serialize_decode.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_serialize_encode.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_serialize_free.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_serialize_get_number_of_codes.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_set_bsr.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_set_callout.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_set_character_tables.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_set_compile_extra_options.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_set_compile_recursion_guard.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_set_depth_limit.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_set_glob_escape.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_set_glob_separator.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_set_heap_limit.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_set_match_limit.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_set_max_pattern_length.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_set_newline.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_set_offset_limit.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_set_parens_nest_limit.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_set_recursion_limit.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_set_recursion_memory_management.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_set_substitute_callout.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_substitute.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_substring_copy_byname.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_substring_copy_bynumber.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_substring_free.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_substring_get_byname.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_substring_get_bynumber.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_substring_length_byname.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_substring_length_bynumber.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_substring_list_free.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_substring_list_get.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_substring_nametable_scan.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2_substring_number_from_name.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2api.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2build.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2callout.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2compat.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2convert.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2demo.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2grep.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2jit.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2limits.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2matching.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2partial.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2pattern.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2perform.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2posix.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2sample.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2serialize.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2syntax.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2test.html > +#usr/share/doc/pcre-pcre2-10.42/html/pcre2unicode.html > +#usr/share/doc/pcre-pcre2-10.42/pcre2-config.txt > +#usr/share/doc/pcre-pcre2-10.42/pcre2.txt > +#usr/share/doc/pcre-pcre2-10.42/pcre2grep.txt > +#usr/share/doc/pcre-pcre2-10.42/pcre2test.txt > #usr/share/man/man1/pcre2-config.1 > #usr/share/man/man1/pcre2grep.1 > #usr/share/man/man1/pcre2test.1 > diff --git a/lfs/pcre2 b/lfs/pcre2 > index b57af0971..4c23f9021 100644 > --- a/lfs/pcre2 > +++ b/lfs/pcre2 > @@ -1,7 +1,7 @@ > ############################################################################### > # # > # IPFire.org - A linux based firewall # > -# Copyright (C) 2007-2019 IPFire Team # > +# Copyright (C) 2007-2022 IPFire Team # > # # > # This program is free software: you can redistribute it and/or modify # > # it under the terms of the GNU General Public License as published by # > @@ -24,7 +24,7 @@ > > include Config > > -VER = 10.40 > +VER = 10.42 > > THISAPP = pcre2-$(VER) > DL_FILE = $(THISAPP).tar.bz2 > @@ -54,7 +54,7 @@ objects = $(DL_FILE) > > $(DL_FILE) = $(DL_FROM)/$(DL_FILE) > > -$(DL_FILE)_BLAKE2 = 627a204585b92238eda81b4befc88757a81d75b0d9fa26ea6d51afcdd93f7e2d102a2245bf3c8e1f5f9ddf69a316c419c948b741a64442bb567480015543e49b > +$(DL_FILE)_BLAKE2 = 40aa096745548c489a00ead87a191a4d24ecd924a5b8f00401c1273176de15ccb23510882467c8e2b5c1256b97db46fba5fcdfbd9f0d61d86a29d74bb4bca7a0 > > install : $(TARGET) >