Permission Denied message for uploadsrc and ssh into builders

Permission Denied message for uploadsrc and ssh into builders

[Adolf Belka]

Hi All,

EDIT:I added the development list to the To: list as I found that I could not find infrastructure in the email lists so wasn't sure if it still existed.


I am not sure when this would have started as it is a few days since I did an uploadsrc but when I tried it today I got asked as usual for bonnietwin@people.ipfire.org's password and I got the following message

Permission denied, please try again.

However access into IPFire People with the same username and password is still working fine so nothing changed with those credentials but they are no longer accepted.

Any idea what could have happened or changed?

At the moment it is not a big thing but if I find any new updates I won't be able to upload the sourcefile and also if there is an update that has different rootfiles between x86_64 and aarch64 then I won't be able to run those builders to get the rootfile results.

Regards,

Adolf.

Re: Permission Denied message for uploadsrc and ssh into builders

[Adolf Belka]

Hi All,

It looks like the restarting of the web server resolved my problem as I can now upload files with ./make.sh uploadsrc and also access both the builders again.

So please ignore this issue now.

Regards,

Adolf.


On 08/09/2025 12:59, Adolf Belka wrote:
> Hi All,
> 
> EDIT:I added the development list to the To: list as I found that I could not find infrastructure in the email lists so wasn't sure if it still existed.
> 
> 
> I am not sure when this would have started as it is a few days since I did an uploadsrc but when I tried it today I got asked as usual for bonnietwin@people.ipfire.org's password and I got the following message
> 
> Permission denied, please try again.
> 
> However access into IPFire People with the same username and password is still working fine so nothing changed with those credentials but they are no longer accepted.
> 
> Any idea what could have happened or changed?
> 
> At the moment it is not a big thing but if I find any new updates I won't be able to upload the sourcefile and also if there is an update that has different rootfiles between x86_64 and aarch64 then I won't be able to run those builders to get the rootfile results.
> 
> Regards,
> 
> Adolf.

Re: Permission Denied message for uploadsrc and ssh into builders

[Matthias Fischer]

Hi,

I can confirm - I've got a similar problem as Adolf - I can't login per
ssh and I can't pull:

***SNIP***
root@Devel64-2: /git/ipfire-2.x # git pull origin next
mfischer@people.ipfire.org's password:
Permission denied, please try again.
***SNAP***

Looks as if I'm persona non grata... ;-)

Anyone else?

Best
Matthias

On 08.09.2025 12:59, Adolf Belka wrote:
> Hi All,
> 
> EDIT:I added the development list to the To: list as I found that I could not find infrastructure in the email lists so wasn't sure if it still existed.
> 
> 
> I am not sure when this would have started as it is a few days since I did an uploadsrc but when I tried it today I got asked as usual for bonnietwin@people.ipfire.org's password and I got the following message
> 
> Permission denied, please try again.
> 
> However access into IPFire People with the same username and password is still working fine so nothing changed with those credentials but they are no longer accepted.
> 
> Any idea what could have happened or changed?
> 
> At the moment it is not a big thing but if I find any new updates I won't be able to upload the sourcefile and also if there is an update that has different rootfiles between x86_64 and aarch64 then I won't be able to run those builders to get the rootfile results.
> 
> Regards,
> 
> Adolf.
> 

Re: Permission Denied message for uploadsrc and ssh into builders

[Adolf Belka]

Hi Matthias,

I sent a follow-up email yesterday because the system worked again for me. I was able to do uploadsrc and also ssh into the builders again.

Because of the timing, I thought it was due to the restart of the ipfire web server, presuming that the issue was related to the LDAP server crashing as it has in the past but if you are still having the same problem today then there must be some other reason and I also don't know then why my access became allowed again.

Regards,

Adolf.


On 11/09/2025 14:45, Matthias Fischer wrote:
> Hi,
> 
> I can confirm - I've got a similar problem as Adolf - I can't login per
> ssh and I can't pull:
> 
> ***SNIP***
> root@Devel64-2: /git/ipfire-2.x # git pull origin next
> mfischer@people.ipfire.org's password:
> Permission denied, please try again.
> ***SNAP***
> 
> Looks as if I'm persona non grata... ;-)
> 
> Anyone else?
> 
> Best
> Matthias
> 
> On 08.09.2025 12:59, Adolf Belka wrote:
>> Hi All,
>>
>> EDIT:I added the development list to the To: list as I found that I could not find infrastructure in the email lists so wasn't sure if it still existed.
>>
>>
>> I am not sure when this would have started as it is a few days since I did an uploadsrc but when I tried it today I got asked as usual for bonnietwin@people.ipfire.org's password and I got the following message
>>
>> Permission denied, please try again.
>>
>> However access into IPFire People with the same username and password is still working fine so nothing changed with those credentials but they are no longer accepted.
>>
>> Any idea what could have happened or changed?
>>
>> At the moment it is not a big thing but if I find any new updates I won't be able to upload the sourcefile and also if there is an update that has different rootfiles between x86_64 and aarch64 then I won't be able to run those builders to get the rootfile results.
>>
>> Regards,
>>
>> Adolf.
>>
> 

Re: Permission Denied message for uploadsrc and ssh into builders

[Matthias Fischer]

On 11.09.2025 16:31, Adolf Belka wrote:
> Hi Matthias,

Hi Adolf,
> I sent a follow-up email yesterday because the system worked again for me. I was able to do uploadsrc and also ssh into the builders again.

Ok, thats fine. ;-)

Here SSH still doesn't like me. Devel is building 'bind 9.20.13' and I'm
waiting... We'll see.

Best
Matthias
> Because of the timing, I thought it was due to the restart of the ipfire web server, presuming that the issue was related to the LDAP server crashing as it has in the past but if you are still having the same problem today then there must be some other reason and I also don't know then why my access became allowed again.
> 
> Regards,
> 
> Adolf.
> 
> 
> On 11/09/2025 14:45, Matthias Fischer wrote:
>> Hi,
>> 
>> I can confirm - I've got a similar problem as Adolf - I can't login per
>> ssh and I can't pull:
>> 
>> ***SNIP***
>> root@Devel64-2: /git/ipfire-2.x # git pull origin next
>> mfischer@people.ipfire.org's password:
>> Permission denied, please try again.
>> ***SNAP***
>> 
>> Looks as if I'm persona non grata... ;-)
>> 
>> Anyone else?
>> 
>> Best
>> Matthias
>> 
>> On 08.09.2025 12:59, Adolf Belka wrote:
>>> Hi All,
>>>
>>> EDIT:I added the development list to the To: list as I found that I could not find infrastructure in the email lists so wasn't sure if it still existed.
>>>
>>>
>>> I am not sure when this would have started as it is a few days since I did an uploadsrc but when I tried it today I got asked as usual for bonnietwin@people.ipfire.org's password and I got the following message
>>>
>>> Permission denied, please try again.
>>>
>>> However access into IPFire People with the same username and password is still working fine so nothing changed with those credentials but they are no longer accepted.
>>>
>>> Any idea what could have happened or changed?
>>>
>>> At the moment it is not a big thing but if I find any new updates I won't be able to upload the sourcefile and also if there is an update that has different rootfiles between x86_64 and aarch64 then I won't be able to run those builders to get the rootfile results.
>>>
>>> Regards,
>>>
>>> Adolf.
>>>
>> 
> 

Re: Permission Denied message for uploadsrc and ssh into builders

[Adolf Belka]

Hi Matthias,

On 11/09/2025 17:39, Matthias Fischer wrote:
> On 11.09.2025 16:31, Adolf Belka wrote:
>> Hi Matthias,
> 
> Hi Adolf,
>> I sent a follow-up email yesterday because the system worked again for me. I was able to do uploadsrc and also ssh into the builders again.
> 
> Ok, thats fine. ;-)
> 
> Here SSH still doesn't like me. Devel is building 'bind 9.20.13' and I'm
> waiting... We'll see.

Yesterday it was back working for me.  hadn't tested today till just a couple of minutes ago and I am back getting the Permission denied message.

So whatever caused it to work yesterday has changed its mind again today.

We will probably have to wait for @Michael to get back home or to somewhere where he can get reasonable wifi.

Regards,

Adolf.


> 
> Best
> Matthias
>> Because of the timing, I thought it was due to the restart of the ipfire web server, presuming that the issue was related to the LDAP server crashing as it has in the past but if you are still having the same problem today then there must be some other reason and I also don't know then why my access became allowed again.
>>
>> Regards,
>>
>> Adolf.
>>
>>
>> On 11/09/2025 14:45, Matthias Fischer wrote:
>>> Hi,
>>>
>>> I can confirm - I've got a similar problem as Adolf - I can't login per
>>> ssh and I can't pull:
>>>
>>> ***SNIP***
>>> root@Devel64-2: /git/ipfire-2.x # git pull origin next
>>> mfischer@people.ipfire.org's password:
>>> Permission denied, please try again.
>>> ***SNAP***
>>>
>>> Looks as if I'm persona non grata... ;-)
>>>
>>> Anyone else?
>>>
>>> Best
>>> Matthias
>>>
>>> On 08.09.2025 12:59, Adolf Belka wrote:
>>>> Hi All,
>>>>
>>>> EDIT:I added the development list to the To: list as I found that I could not find infrastructure in the email lists so wasn't sure if it still existed.
>>>>
>>>>
>>>> I am not sure when this would have started as it is a few days since I did an uploadsrc but when I tried it today I got asked as usual for bonnietwin@people.ipfire.org's password and I got the following message
>>>>
>>>> Permission denied, please try again.
>>>>
>>>> However access into IPFire People with the same username and password is still working fine so nothing changed with those credentials but they are no longer accepted.
>>>>
>>>> Any idea what could have happened or changed?
>>>>
>>>> At the moment it is not a big thing but if I find any new updates I won't be able to upload the sourcefile and also if there is an update that has different rootfiles between x86_64 and aarch64 then I won't be able to run those builders to get the rootfile results.
>>>>
>>>> Regards,
>>>>
>>>> Adolf.
>>>>
>>>
>>
> 

Re: Permission Denied message for uploadsrc and ssh into builders

[Michael Tremer]

Hello,

I am back… It seems that it broke again… Some problems with the recent Debian :(

-Michael

> On 11 Sep 2025, at 16:54, Adolf Belka <adolf.belka@ipfire.org> wrote:
> 
> Hi Matthias,
> 
> On 11/09/2025 17:39, Matthias Fischer wrote:
>> On 11.09.2025 16:31, Adolf Belka wrote:
>>> Hi Matthias,
>> Hi Adolf,
>>> I sent a follow-up email yesterday because the system worked again for me. I was able to do uploadsrc and also ssh into the builders again.
>> Ok, thats fine. ;-)
>> Here SSH still doesn't like me. Devel is building 'bind 9.20.13' and I'm
>> waiting... We'll see.
> 
> Yesterday it was back working for me.  hadn't tested today till just a couple of minutes ago and I am back getting the Permission denied message.
> 
> So whatever caused it to work yesterday has changed its mind again today.
> 
> We will probably have to wait for @Michael to get back home or to somewhere where he can get reasonable wifi.
> 
> Regards,
> 
> Adolf.
> 
> 
>> Best
>> Matthias
>>> Because of the timing, I thought it was due to the restart of the ipfire web server, presuming that the issue was related to the LDAP server crashing as it has in the past but if you are still having the same problem today then there must be some other reason and I also don't know then why my access became allowed again.
>>> 
>>> Regards,
>>> 
>>> Adolf.
>>> 
>>> 
>>> On 11/09/2025 14:45, Matthias Fischer wrote:
>>>> Hi,
>>>> 
>>>> I can confirm - I've got a similar problem as Adolf - I can't login per
>>>> ssh and I can't pull:
>>>> 
>>>> ***SNIP***
>>>> root@Devel64-2: /git/ipfire-2.x # git pull origin next
>>>> mfischer@people.ipfire.org's password:
>>>> Permission denied, please try again.
>>>> ***SNAP***
>>>> 
>>>> Looks as if I'm persona non grata... ;-)
>>>> 
>>>> Anyone else?
>>>> 
>>>> Best
>>>> Matthias
>>>> 
>>>> On 08.09.2025 12:59, Adolf Belka wrote:
>>>>> Hi All,
>>>>> 
>>>>> EDIT:I added the development list to the To: list as I found that I could not find infrastructure in the email lists so wasn't sure if it still existed.
>>>>> 
>>>>> 
>>>>> I am not sure when this would have started as it is a few days since I did an uploadsrc but when I tried it today I got asked as usual for bonnietwin@people.ipfire.org's password and I got the following message
>>>>> 
>>>>> Permission denied, please try again.
>>>>> 
>>>>> However access into IPFire People with the same username and password is still working fine so nothing changed with those credentials but they are no longer accepted.
>>>>> 
>>>>> Any idea what could have happened or changed?
>>>>> 
>>>>> At the moment it is not a big thing but if I find any new updates I won't be able to upload the sourcefile and also if there is an update that has different rootfiles between x86_64 and aarch64 then I won't be able to run those builders to get the rootfile results.
>>>>> 
>>>>> Regards,
>>>>> 
>>>>> Adolf.
>>>>> 
>>>> 
>>> 
> 
> 

Re: Permission Denied message for uploadsrc and ssh into builders

[Matthias Fischer]

Hi,

whatever it was - for my side its fixed. Pulling and SSH-Login both
worked. 'bind 9.20.13' will be on its way soon...

Thanks...

Best
Matthias

On 12.09.2025 17:51, Michael Tremer wrote:
> Hello,
> 
> I am back… It seems that it broke again… Some problems with the recent Debian :(
> 
> -Michael
> 
>> On 11 Sep 2025, at 16:54, Adolf Belka <adolf.belka@ipfire.org> wrote:
>> 
>> Hi Matthias,
>> 
>> On 11/09/2025 17:39, Matthias Fischer wrote:
>>> On 11.09.2025 16:31, Adolf Belka wrote:
>>>> Hi Matthias,
>>> Hi Adolf,
>>>> I sent a follow-up email yesterday because the system worked again for me. I was able to do uploadsrc and also ssh into the builders again.
>>> Ok, thats fine. ;-)
>>> Here SSH still doesn't like me. Devel is building 'bind 9.20.13' and I'm
>>> waiting... We'll see.
>> 
>> Yesterday it was back working for me.  hadn't tested today till just a couple of minutes ago and I am back getting the Permission denied message.
>> 
>> So whatever caused it to work yesterday has changed its mind again today.
>> 
>> We will probably have to wait for @Michael to get back home or to somewhere where he can get reasonable wifi.
>> 
>> Regards,
>> 
>> Adolf.
>> 
>> 
>>> Best
>>> Matthias
>>>> Because of the timing, I thought it was due to the restart of the ipfire web server, presuming that the issue was related to the LDAP server crashing as it has in the past but if you are still having the same problem today then there must be some other reason and I also don't know then why my access became allowed again.
>>>> 
>>>> Regards,
>>>> 
>>>> Adolf.
>>>> 
>>>> 
>>>> On 11/09/2025 14:45, Matthias Fischer wrote:
>>>>> Hi,
>>>>> 
>>>>> I can confirm - I've got a similar problem as Adolf - I can't login per
>>>>> ssh and I can't pull:
>>>>> 
>>>>> ***SNIP***
>>>>> root@Devel64-2: /git/ipfire-2.x # git pull origin next
>>>>> mfischer@people.ipfire.org's password:
>>>>> Permission denied, please try again.
>>>>> ***SNAP***
>>>>> 
>>>>> Looks as if I'm persona non grata... ;-)
>>>>> 
>>>>> Anyone else?
>>>>> 
>>>>> Best
>>>>> Matthias
>>>>> 
>>>>> On 08.09.2025 12:59, Adolf Belka wrote:
>>>>>> Hi All,
>>>>>> 
>>>>>> EDIT:I added the development list to the To: list as I found that I could not find infrastructure in the email lists so wasn't sure if it still existed.
>>>>>> 
>>>>>> 
>>>>>> I am not sure when this would have started as it is a few days since I did an uploadsrc but when I tried it today I got asked as usual for bonnietwin@people.ipfire.org's password and I got the following message
>>>>>> 
>>>>>> Permission denied, please try again.
>>>>>> 
>>>>>> However access into IPFire People with the same username and password is still working fine so nothing changed with those credentials but they are no longer accepted.
>>>>>> 
>>>>>> Any idea what could have happened or changed?
>>>>>> 
>>>>>> At the moment it is not a big thing but if I find any new updates I won't be able to upload the sourcefile and also if there is an update that has different rootfiles between x86_64 and aarch64 then I won't be able to run those builders to get the rootfile results.
>>>>>> 
>>>>>> Regards,
>>>>>> 
>>>>>> Adolf.
>>>>>> 
>>>>> 
>>>> 
>> 
>> 
>