Need to revert a commit in temp-CU164

Need to revert a commit in temp-CU164

[Adolf Belka]

[-- Attachment #1: Type: text/plain, Size: 714 bytes --]

Hi Peter,

I saw that you merged I patch I did some time ago for the update of pythons-setuptools from version 56.2.0 to 58.0.4

I have been working on the python3 upgrade from 3.8 to 3.10 and with this I am also updating the various python modules that are out of date.


I had forgotten that I had done that patch so my python3 series build is also updating python3-setuptools from 56.2.0 to 59.5.0

I would appreciate it if you could revert my patch https://git.ipfire.org/?p=people/pmueller/ipfire-2.x.git;a=commit;h=c2539fe22eb32dee82e378f2b8de60dd16491362 otherwise I will need to start all over again for the third time with my python3 branch build.


Thanks very much and regards,

Adolf.

Re: Need to revert a commit in temp-CU164

[Michael Tremer]

[-- Attachment #1: Type: text/plain, Size: 938 bytes --]

Hello Adolf,

You can just revert this commit in your local branch. That is probably easiest.

-Michael

> On 24 Jan 2022, at 09:46, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
> 
> Hi Peter,
> 
> I saw that you merged I patch I did some time ago for the update of pythons-setuptools from version 56.2.0 to 58.0.4
> 
> I have been working on the python3 upgrade from 3.8 to 3.10 and with this I am also updating the various python modules that are out of date.
> 
> 
> I had forgotten that I had done that patch so my python3 series build is also updating python3-setuptools from 56.2.0 to 59.5.0
> 
> I would appreciate it if you could revert my patch https://git.ipfire.org/?p=people/pmueller/ipfire-2.x.git;a=commit;h=c2539fe22eb32dee82e378f2b8de60dd16491362 otherwise I will need to start all over again for the third time with my python3 branch build.
> 
> 
> Thanks very much and regards,
> 
> Adolf.
> 

Re: Need to revert a commit in temp-CU164

[Adolf Belka]

[-- Attachment #1: Type: text/plain, Size: 1407 bytes --]

Hi Michael,

On 24/01/2022 12:13, Michael Tremer wrote:
> Hello Adolf,
> 
> You can just revert this commit in your local branch. That is probably easiest.
The commit is not in my local branch. Whenever I do an update I always do it in a branch which is based on the current status of next. So as next does not yet have that patch merged from the temp-cu164 branch of Peter, then it is also not in my python3.10 branch.
Maybe I am not using the git branches the way I should be but that is what I have been doing to date.

Regards,
Adolf.
> 
> -Michael
> 
>> On 24 Jan 2022, at 09:46, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>>
>> Hi Peter,
>>
>> I saw that you merged I patch I did some time ago for the update of pythons-setuptools from version 56.2.0 to 58.0.4
>>
>> I have been working on the python3 upgrade from 3.8 to 3.10 and with this I am also updating the various python modules that are out of date.
>>
>>
>> I had forgotten that I had done that patch so my python3 series build is also updating python3-setuptools from 56.2.0 to 59.5.0
>>
>> I would appreciate it if you could revert my patch https://git.ipfire.org/?p=people/pmueller/ipfire-2.x.git;a=commit;h=c2539fe22eb32dee82e378f2b8de60dd16491362 otherwise I will need to start all over again for the third time with my python3 branch build.
>>
>>
>> Thanks very much and regards,
>>
>> Adolf.
>>
> 

Re: Need to revert a commit in temp-CU164

[Michael Tremer]

[-- Attachment #1: Type: text/plain, Size: 1641 bytes --]

Hello Adolf,

> On 24 Jan 2022, at 11:28, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
> 
> Hi Michael,
> 
> On 24/01/2022 12:13, Michael Tremer wrote:
>> Hello Adolf,
>> You can just revert this commit in your local branch. That is probably easiest.
> The commit is not in my local branch. Whenever I do an update I always do it in a branch which is based on the current status of next. So as next does not yet have that patch merged from the temp-cu164 branch of Peter, then it is also not in my python3.10 branch.
> Maybe I am not using the git branches the way I should be but that is what I have been doing to date.

Then I do not understand :)

Are you trying to rebase your Python 3.10 branch on next?

-Michael

> 
> Regards,
> Adolf.
>> -Michael
>>> On 24 Jan 2022, at 09:46, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>>> 
>>> Hi Peter,
>>> 
>>> I saw that you merged I patch I did some time ago for the update of pythons-setuptools from version 56.2.0 to 58.0.4
>>> 
>>> I have been working on the python3 upgrade from 3.8 to 3.10 and with this I am also updating the various python modules that are out of date.
>>> 
>>> 
>>> I had forgotten that I had done that patch so my python3 series build is also updating python3-setuptools from 56.2.0 to 59.5.0
>>> 
>>> I would appreciate it if you could revert my patch https://git.ipfire.org/?p=people/pmueller/ipfire-2.x.git;a=commit;h=c2539fe22eb32dee82e378f2b8de60dd16491362 otherwise I will need to start all over again for the third time with my python3 branch build.
>>> 
>>> 
>>> Thanks very much and regards,
>>> 
>>> Adolf.
>>> 

Re: Need to revert a commit in temp-CU164

[Adolf Belka]

[-- Attachment #1: Type: text/plain, Size: 2345 bytes --]

Hi Michael,

On 24/01/2022 12:37, Michael Tremer wrote:
> Hello Adolf,
> 
>> On 24 Jan 2022, at 11:28, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>>
>> Hi Michael,
>>
>> On 24/01/2022 12:13, Michael Tremer wrote:
>>> Hello Adolf,
>>> You can just revert this commit in your local branch. That is probably easiest.
>> The commit is not in my local branch. Whenever I do an update I always do it in a branch which is based on the current status of next. So as next does not yet have that patch merged from the temp-cu164 branch of Peter, then it is also not in my python3.10 branch.
>> Maybe I am not using the git branches the way I should be but that is what I have been doing to date.
> 
> Then I do not understand :)
> 
> Are you trying to rebase your Python 3.10 branch on next?
I am not trying to rebase it. It is based on next. I have done an update in that branch of python3-setuptools from 56.2.0 to 59.5.0

If that branch was merged today then it would be fine. However if the earlier patch of python3-setuptools that is in Peter's temp branch gets merged into next first then python3-setuptools in next will be at version 58.0.4
I would expect that if my python3 branch was merged after that there would be a problem with the patch that would be trying to update python3-setuptools from 56.2.0 to 59.5.0 because python3-setuptools would be at version 58.0.4
> 
> -Michael
Regards,
Adolf.
> 
>>
>> Regards,
>> Adolf.
>>> -Michael
>>>> On 24 Jan 2022, at 09:46, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>>>>
>>>> Hi Peter,
>>>>
>>>> I saw that you merged I patch I did some time ago for the update of pythons-setuptools from version 56.2.0 to 58.0.4
>>>>
>>>> I have been working on the python3 upgrade from 3.8 to 3.10 and with this I am also updating the various python modules that are out of date.
>>>>
>>>>
>>>> I had forgotten that I had done that patch so my python3 series build is also updating python3-setuptools from 56.2.0 to 59.5.0
>>>>
>>>> I would appreciate it if you could revert my patch https://git.ipfire.org/?p=people/pmueller/ipfire-2.x.git;a=commit;h=c2539fe22eb32dee82e378f2b8de60dd16491362 otherwise I will need to start all over again for the third time with my python3 branch build.
>>>>
>>>>
>>>> Thanks very much and regards,
>>>>
>>>> Adolf.
>>>>
> 

Re: Need to revert a commit in temp-CU164

[Michael Tremer]

[-- Attachment #1: Type: text/plain, Size: 2713 bytes --]

Hello,

> On 24 Jan 2022, at 12:42, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
> 
> Hi Michael,
> 
> On 24/01/2022 12:37, Michael Tremer wrote:
>> Hello Adolf,
>>> On 24 Jan 2022, at 11:28, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>>> 
>>> Hi Michael,
>>> 
>>> On 24/01/2022 12:13, Michael Tremer wrote:
>>>> Hello Adolf,
>>>> You can just revert this commit in your local branch. That is probably easiest.
>>> The commit is not in my local branch. Whenever I do an update I always do it in a branch which is based on the current status of next. So as next does not yet have that patch merged from the temp-cu164 branch of Peter, then it is also not in my python3.10 branch.
>>> Maybe I am not using the git branches the way I should be but that is what I have been doing to date.
>> Then I do not understand :)
>> Are you trying to rebase your Python 3.10 branch on next?
> I am not trying to rebase it. It is based on next. I have done an update in that branch of python3-setuptools from 56.2.0 to 59.5.0
> 
> If that branch was merged today then it would be fine. However if the earlier patch of python3-setuptools that is in Peter's temp branch gets merged into next first then python3-setuptools in next will be at version 58.0.4
> I would expect that if my python3 branch was merged after that there would be a problem with the patch that would be trying to update python3-setuptools from 56.2.0 to 59.5.0 because python3-setuptools would be at version 58.0.4

Yes, this would cause a merge conflict and git will stop and ask to resolve the conflict. This is however very easy to resolve because only the version and the checksum have been touched. So no need to worry about it.

-Michael

>> -Michael
> Regards,
> Adolf.
>>> 
>>> Regards,
>>> Adolf.
>>>> -Michael
>>>>> On 24 Jan 2022, at 09:46, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>>>>> 
>>>>> Hi Peter,
>>>>> 
>>>>> I saw that you merged I patch I did some time ago for the update of pythons-setuptools from version 56.2.0 to 58.0.4
>>>>> 
>>>>> I have been working on the python3 upgrade from 3.8 to 3.10 and with this I am also updating the various python modules that are out of date.
>>>>> 
>>>>> 
>>>>> I had forgotten that I had done that patch so my python3 series build is also updating python3-setuptools from 56.2.0 to 59.5.0
>>>>> 
>>>>> I would appreciate it if you could revert my patch https://git.ipfire.org/?p=people/pmueller/ipfire-2.x.git;a=commit;h=c2539fe22eb32dee82e378f2b8de60dd16491362 otherwise I will need to start all over again for the third time with my python3 branch build.
>>>>> 
>>>>> 
>>>>> Thanks very much and regards,
>>>>> 
>>>>> Adolf.
>>>>> 

Re: Need to revert a commit in temp-CU164

[Adolf Belka]

[-- Attachment #1: Type: text/plain, Size: 2893 bytes --]



On 24/01/2022 15:10, Michael Tremer wrote:
> Hello,
> 
>> On 24 Jan 2022, at 12:42, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>>
>> Hi Michael,
>>
>> On 24/01/2022 12:37, Michael Tremer wrote:
>>> Hello Adolf,
>>>> On 24 Jan 2022, at 11:28, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>>>>
>>>> Hi Michael,
>>>>
>>>> On 24/01/2022 12:13, Michael Tremer wrote:
>>>>> Hello Adolf,
>>>>> You can just revert this commit in your local branch. That is probably easiest.
>>>> The commit is not in my local branch. Whenever I do an update I always do it in a branch which is based on the current status of next. So as next does not yet have that patch merged from the temp-cu164 branch of Peter, then it is also not in my python3.10 branch.
>>>> Maybe I am not using the git branches the way I should be but that is what I have been doing to date.
>>> Then I do not understand :)
>>> Are you trying to rebase your Python 3.10 branch on next?
>> I am not trying to rebase it. It is based on next. I have done an update in that branch of python3-setuptools from 56.2.0 to 59.5.0
>>
>> If that branch was merged today then it would be fine. However if the earlier patch of python3-setuptools that is in Peter's temp branch gets merged into next first then python3-setuptools in next will be at version 58.0.4
>> I would expect that if my python3 branch was merged after that there would be a problem with the patch that would be trying to update python3-setuptools from 56.2.0 to 59.5.0 because python3-setuptools would be at version 58.0.4
> 
> Yes, this would cause a merge conflict and git will stop and ask to resolve the conflict. This is however very easy to resolve because only the version and the checksum have been touched. So no need to worry about it.
Okay, that is good news. I won't worry about it any more.
Thanks very much,
Adolf.
> 
> -Michael
> 
>>> -Michael
>> Regards,
>> Adolf.
>>>>
>>>> Regards,
>>>> Adolf.
>>>>> -Michael
>>>>>> On 24 Jan 2022, at 09:46, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>>>>>>
>>>>>> Hi Peter,
>>>>>>
>>>>>> I saw that you merged I patch I did some time ago for the update of pythons-setuptools from version 56.2.0 to 58.0.4
>>>>>>
>>>>>> I have been working on the python3 upgrade from 3.8 to 3.10 and with this I am also updating the various python modules that are out of date.
>>>>>>
>>>>>>
>>>>>> I had forgotten that I had done that patch so my python3 series build is also updating python3-setuptools from 56.2.0 to 59.5.0
>>>>>>
>>>>>> I would appreciate it if you could revert my patch https://git.ipfire.org/?p=people/pmueller/ipfire-2.x.git;a=commit;h=c2539fe22eb32dee82e378f2b8de60dd16491362 otherwise I will need to start all over again for the third time with my python3 branch build.
>>>>>>
>>>>>>
>>>>>> Thanks very much and regards,
>>>>>>
>>>>>> Adolf.
>>>>>>
>