Re: Fireperf: first tests an results

[Michael Tremer <michael.tremer@ipfire.org>]

[-- Attachment #1: Type: text/plain, Size: 3209 bytes --]

Hi,

> On 12 Feb 2021, at 12:34, Adolf Belka (ipfire-dev) <adolf.belka(a)ipfire.org> wrote:
> 
> Forgot to add that I built it on my Arch Linux system with the following commands:-
> 
> ./autogen.sh
> 
> /configure CFLAGS='-g -O0' --prefix=/usr --sysconfdir=/etc --libdir=/usr/lib (This was recommended to be used after autogen was run)
> 
> make
> 
> sudo make install

That’s correct.

The CFLAGS disable any optimisation (-O0) and enable generation of debugging sections (-g) which are useful for gdb.

You probably don’t need this, so you can build it without those flags.

Do you know what the process is that we could provide packages for Arch and any derivatives?

In general, I want to make things like libloc and fireperf available and do that as easy as possible.

-Michael

> Regards,
> 
> Adolf.
> 
> 
> On 12/02/2021 13:30, Adolf Belka (ipfire-dev) wrote:
>> Hi all,
>> 
>> I tried to also test this out on my system.
>> 
>> As I am not familiar with what all the command options do I just followed Daniels commands.
>> 
>> server: IPFire 2.25 - Core Update 153; Intel Celeron CPU J1900 @ 1.99GHz x4; I211 Gigabit Network Connection
>> 
>> client: Arch Linux; Intel Core i5-8400 CPU @ 2.80GHz 6 core; 1GBit nic
>> 
>> Server:
>> fireperf -s -P 10000 -p 63000:630010
>> 
>> 
>> Client:
>> fireperf -c <IP address> -P 1 -x -p 63000:63010 where <IP address> was replaced with the IP address of my IPFire Green connection.
>> 
>> 
>> I started the server fireperf and there was the table updating regularly.
>> 
>> I started the client and got "Could not open socket: Address family not supported by protocol" scrolling up the screen.
>> 
>> I looked in the log (journalctl) but there were no messages at all related to fireperf just the command being run.
>> 
>> 
>> Any thoughts on what I am missing to have setup or installed?
>> 
>> 
>> Regards,
>> 
>> Adolf.
>> 
>> 
>> 
>> On 09/02/2021 13:53, daniel.weismueller(a)ipfire.org wrote:
>>> 
>>> 
>>> Hi guys,
>>> 
>>> today I installed fireperf on my testing IPFire and my Ubuntu PC.
>>> 
>>> server: IPFire Core 154; Intel i7 4790; Intel 82571EB/GB 1GBit Nic
>>> Client: Ubuntu 20.4; Intel i7 9700; Intel i219-V 1GBit Nic
>>> 
>>> Michael and I agreed that one more port should be opened per 5000 expected connection per second (cps)
>>> 
>>> So here my results:
>>> 
>>> 
>>> Server:
>>> fireperf -s -P 10000 -p 63000:630010
>>> 
>>> Client:
>>> fireperf -c <IP address> -P 1 -x -p 63000:63010 -> ~5000 cps
>>> 
>>> fireperf -c <IP address> -P 10 -x -p 63000:63010 -> ~30000-35000 cps
>>> 
>>> fireperf -c <IP address> -P 100 -x -p 63000:63010 -> ~35000-40000 cps
>>> 
>>> fireperf -c <IP address> -P 1000 -x -p 63000:63010 -> ~40000-45000 cps
>>> 
>>> fireperf -c <IP address> -P 10000 -x -p 63000:63010 -> ~46000-48000 cps
>>> 
>>> The cpu utilization was limited to one core and increased in sync with the cps on both sides.
>>> 
>>> In my last test, the utilization was about 85-100% on the server and 75-95% on the client.
>>> 
>>> In the next days I will test our mini and post the results here.
>>> 
>>> -
>>> 
>>> Daniel
>>>