Re: [PATCH] i2c-tools: Update to version 4.3

["Peter Müller" <peter.mueller@ipfire.org>]

[-- Attachment #1: Type: text/plain, Size: 8846 bytes --]

Reviewed-by: Peter Müller <peter.mueller(a)ipfire.org>

> - Update from version 3.1.2 (July 2017) to 4.3 (July 2021)
> - Update of rootfile
> - Changelog
>     4.3 (2021-07-22)
> 	  decode-dimms: Attempt to decode LPDDR3 modules
> 	  eeprom, eepromer: Removed the tools in favor of eeprog
> 	  i2cdetect: Sort the bus list by number
> 	  i2cdump: Add range support to I2C block mode
> 	           Deprecate SMBus block mode
> 	  i2cget: Add support for I2C block read
> 	          Add support for SMBus block read
> 	  i2ctransfer: Reverted check for returned length from driver
>     4.2 (2020-09-22)
> 	  manpages: Add BUGS section to let people know how to contact us
> 	  Makefile: Allow to preset all CFLAGS and LDFLAGS variables
> 	  tools: Consistently use snprintf instead of sprintf
> 	         Restrict addresses 0x03-0x07, too (defined by I2C standard)
> 	  decode-dimms: Print SPD revision for DDR3 too
> 	                Print primary bus width for DDR3 and DDR4
> 	                List ee1004 as a candidate driver
> 	                Display MAC for DDR3
> 	                Add MAC abbreviation for DDR4
> 	                Round DDR4 speed properly
> 	                Detect and report truncated input files
> 	                Print kernel driver used
> 	                Print DDR memory speed in MT/s
> 	                Add DDR5 memory types
> 	                Decode manufacturing data for LPDDR3
> 	                Fix the version string
> 	                Point the user to the right drivers
> 	                Update the list of vendors to Jedec JEP106BB
> 	  decode-vaio: Add support for the at24 driver
> 	               Scan more i2c buses
> 	  i2cset: Fix short writes with mask
> 	  i2ctransfer: Mention '-a' everywhere in the manpage
> 	               Support messages using I2C_M_RECV_LEN
> 	               Add check for returned length from driver
> 	  i2c-stub-from-dump: Read dumps from hexdump -C
> 	  library: Add a manual page to document the API
>     4.1 (2018-11-30)
> 	  Makefile: Make STRIP, DESTDIR and PREFIX overridable
> 	  tools: Fix potential buffer overflows in i2cbusses
> 	         Fix build race
> 	         Allow usage of reserved addresses with the '-a' flag
> 	  decode-dimms: Add preliminary DDR4 support
> 	                Decode size and timings of DDR4
> 	                Decode misc parameters of DDR4
> 	                Decode physical characteristics of DDR4
> 	                Documentation update for DDR4
> 	                Verify the CRC of DDR4 data block 1
> 	                Update manufacturer IDs (JEP106AX)
> 	  eeprog: Fix ambiguous parentheses
> 	          Fix build race
> 	  i2ctransfer: Rename option '-f' to '-a' for consistency
> 	  i2c-dev.h: Delete
> 	  library: Fix build race
> 	           Allow disabling the dynamic flavor
> 	           Mention the correct license in source files
> 	  py-smbus: Fix i2c_smbus_* error propagation
>     4.0 (2017-10-30)
> 	  tools: Fix build with recent compilers (gcc 4.6+)
> 	         Add examples to the manual pages
> 	  README: Clarify licenses
> 	          Mention the current maintainer
> 	  decode-dimms: Decode module configuration type of DDR2 SDRAM
> 	                Decode bus width extension of DDR3 SDRAM
> 	                Don't choke when no EEPROM is found
> 	                Don't make columns larger than they need to be
> 	                Make side-by-side output more robust
> 	                Print module organization of DDR SDRAM
> 	                Merge cells by default in side-by-side output
> 	                Print extra timing values of DDR SDRAM
> 	                Print DDR and DDR2 core timings for all supported CAS values
> 	                Print DDR2 equivalent speed of tCK max
> 	                Don't print undefined DDR2 SDRAM timings
> 			Print SDR, DDR, DDR2, DDR3 core timings for all standard speeds
> 	                Update manufacturer IDs
> 	                Make DDR3 manufacturer count parity error non-fatal
> 	                Strip former manufacturer name in side-by-side output mode
> 	                Remove duplicate "ns" in SDR timings
> 	                Add section headers for SDR modules
> 	                Fix decoding of SDR SPD revision
> 	                Prevent hang on reserved DDR3 module type
> 	                Decode more DDR3 module types
> 	                Fix DDR3 tRAS decoding
> 	                Fix DDR3 core timings rounding
> 	                Round down PC3 numbers to comply with Jedec
> 	                Don't print the DDR3 time bases
> 	                Decode the FTB fields of DDR3 tCk, tAA, tRCD, tRP and tRC
> 	                Fix speed and PC3 number of high-speed DDR3 modules
> 	                Decode DDR3 reference card revision
> 	                Print width of all known DDR3 module types
> 	                Print physical characteristics for all DDR3 module types
> 	                Don't print raw SSTE32882 register values
> 	                Add support for Load Reduced DIMM (LRDIMM) DDR3 modules
> 	                Fully decode the DDR3 SDRAM Device Type field
> 	                Fix DDR3 extended temp range refresh rate decoding
> 	                Encode "degrees" to HTML degree symbol
> 	                Generate XHTML 1.1 compliant markup
> 	                Add a manual page
> 	                Correctly check for out-of-bounds vendor ID
> 	                Update manufacturer IDs (JEP106AQ)
> 	  decode-vaio: Add a manual page
> 	  eeprog: Add a manual page
> 	          Moved to a separate subdirectory
> 	          Increase delay after writes
> 	  eeprom: Add a manual page
> 	          Marked as deprecated
> 	  eepromer: Add a manual page
> 	            Marked as deprecated
> 	  i2cdetect: Do a best effort detection if functionality is missing
> 	             Clarify the SMBus commands used for probing by default
> 	  i2ctransfer: New tool to send user-defined I2C messages in one transfer
> 	  i2c-dev.h: Minimize differences with kernel flavor
> 	             Move SMBus helper functions to include/i2c/smbus.h
> 	  i2c-stub-from-dump: Be more tolerant on input dump format
> 	  library: New libi2c library
> 	           Properly propagate real error codes on read errors
> 	           Use I2C_SMBUS_BLOCK_MAX instead of hard-coding 32
> 	  lib/smbus.c: Add missing include which was causing a build error
> 	  py-smbus: Fix module level docs
> 	            Add support for python 3
> 
> Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
> ---
>  config/rootfiles/common/i2c-tools | 9 +++++++++
>  lfs/i2c-tools                     | 8 +++++---
>  2 files changed, 14 insertions(+), 3 deletions(-)
> 
> diff --git a/config/rootfiles/common/i2c-tools b/config/rootfiles/common/i2c-tools
> index fb5ee8326..7dec1eec1 100644
> --- a/config/rootfiles/common/i2c-tools
> +++ b/config/rootfiles/common/i2c-tools
> @@ -2,15 +2,24 @@ usr/bin/ddcmon
>  usr/bin/decode-dimms
>  usr/bin/decode-edid
>  usr/bin/decode-vaio
> +#usr/include/i2c
> +#usr/include/i2c/smbus.h
> +#usr/lib/libi2c.so
> +usr/lib/libi2c.so.0
> +usr/lib/libi2c.so.0.1.1
>  usr/sbin/i2c-stub-from-dump
>  usr/sbin/i2cdetect
>  usr/sbin/i2cdump
>  usr/sbin/i2cget
>  usr/sbin/i2cset
> +usr/sbin/i2ctransfer
>  #usr/share/man/man1/decode-dimms.1
>  #usr/share/man/man1/decode-vaio.1
> +#usr/share/man/man3/libi2c.3
>  #usr/share/man/man8/i2c-stub-from-dump.8
>  #usr/share/man/man8/i2cdetect.8
>  #usr/share/man/man8/i2cdump.8
>  #usr/share/man/man8/i2cget.8
>  #usr/share/man/man8/i2cset.8
> +#usr/share/man/man8/i2ctransfer.8
> +
> diff --git a/lfs/i2c-tools b/lfs/i2c-tools
> index 9910afe53..cb3a9e0b6 100644
> --- a/lfs/i2c-tools
> +++ b/lfs/i2c-tools
> @@ -24,7 +24,7 @@
>  
>  include Config
>  
> -VER        = 3.1.2
> +VER        = 4.3
>  
>  THISAPP    = i2c-tools-$(VER)
>  DL_FILE    = $(THISAPP).tar.xz
> @@ -40,7 +40,7 @@ objects = $(DL_FILE)
>  
>  $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>  
> -$(DL_FILE)_BLAKE2 = 7c1a4ac9034a33bffed989b7c960bfadafc537007561a5c4ced231ae999691a0a76f5f1a2df41bddae1537bf7b627e2b09788dc056af16b58da4af3d647a4b21
> +$(DL_FILE)_BLAKE2 = c7300224c8d32785cd067b632bf0e9591f05264b1572f44aebda5f30a95164732d606710c13739ccb7899476219ceb3033beaf95b718ed7e18122f9181dc13fc
>  
>  install : $(TARGET)
>  
> @@ -74,6 +74,8 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>  	@$(PREBUILD)
>  	@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
>  	cd $(DIR_APP) && make $(MAKETUNING)
> -	cd $(DIR_APP) && make install prefix=/usr
> +	cd $(DIR_APP) && make install PREFIX=/usr \
> +	                      BUILD_DYNAMIC_LIB=1 \
> +	                      BUILD_STATIC_LIB=0
>  	@rm -rf $(DIR_APP)
>  	@$(POSTBUILD)