* [PATCH] i2c-tools: Update to version 4.3
@ 2022-07-10 21:02 Adolf Belka
2022-07-11 10:14 ` Peter Müller
0 siblings, 1 reply; 2+ messages in thread
From: Adolf Belka @ 2022-07-10 21:02 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 8422 bytes --]
- Update from version 3.1.2 (July 2017) to 4.3 (July 2021)
- Update of rootfile
- Changelog
4.3 (2021-07-22)
decode-dimms: Attempt to decode LPDDR3 modules
eeprom, eepromer: Removed the tools in favor of eeprog
i2cdetect: Sort the bus list by number
i2cdump: Add range support to I2C block mode
Deprecate SMBus block mode
i2cget: Add support for I2C block read
Add support for SMBus block read
i2ctransfer: Reverted check for returned length from driver
4.2 (2020-09-22)
manpages: Add BUGS section to let people know how to contact us
Makefile: Allow to preset all CFLAGS and LDFLAGS variables
tools: Consistently use snprintf instead of sprintf
Restrict addresses 0x03-0x07, too (defined by I2C standard)
decode-dimms: Print SPD revision for DDR3 too
Print primary bus width for DDR3 and DDR4
List ee1004 as a candidate driver
Display MAC for DDR3
Add MAC abbreviation for DDR4
Round DDR4 speed properly
Detect and report truncated input files
Print kernel driver used
Print DDR memory speed in MT/s
Add DDR5 memory types
Decode manufacturing data for LPDDR3
Fix the version string
Point the user to the right drivers
Update the list of vendors to Jedec JEP106BB
decode-vaio: Add support for the at24 driver
Scan more i2c buses
i2cset: Fix short writes with mask
i2ctransfer: Mention '-a' everywhere in the manpage
Support messages using I2C_M_RECV_LEN
Add check for returned length from driver
i2c-stub-from-dump: Read dumps from hexdump -C
library: Add a manual page to document the API
4.1 (2018-11-30)
Makefile: Make STRIP, DESTDIR and PREFIX overridable
tools: Fix potential buffer overflows in i2cbusses
Fix build race
Allow usage of reserved addresses with the '-a' flag
decode-dimms: Add preliminary DDR4 support
Decode size and timings of DDR4
Decode misc parameters of DDR4
Decode physical characteristics of DDR4
Documentation update for DDR4
Verify the CRC of DDR4 data block 1
Update manufacturer IDs (JEP106AX)
eeprog: Fix ambiguous parentheses
Fix build race
i2ctransfer: Rename option '-f' to '-a' for consistency
i2c-dev.h: Delete
library: Fix build race
Allow disabling the dynamic flavor
Mention the correct license in source files
py-smbus: Fix i2c_smbus_* error propagation
4.0 (2017-10-30)
tools: Fix build with recent compilers (gcc 4.6+)
Add examples to the manual pages
README: Clarify licenses
Mention the current maintainer
decode-dimms: Decode module configuration type of DDR2 SDRAM
Decode bus width extension of DDR3 SDRAM
Don't choke when no EEPROM is found
Don't make columns larger than they need to be
Make side-by-side output more robust
Print module organization of DDR SDRAM
Merge cells by default in side-by-side output
Print extra timing values of DDR SDRAM
Print DDR and DDR2 core timings for all supported CAS values
Print DDR2 equivalent speed of tCK max
Don't print undefined DDR2 SDRAM timings
Print SDR, DDR, DDR2, DDR3 core timings for all standard speeds
Update manufacturer IDs
Make DDR3 manufacturer count parity error non-fatal
Strip former manufacturer name in side-by-side output mode
Remove duplicate "ns" in SDR timings
Add section headers for SDR modules
Fix decoding of SDR SPD revision
Prevent hang on reserved DDR3 module type
Decode more DDR3 module types
Fix DDR3 tRAS decoding
Fix DDR3 core timings rounding
Round down PC3 numbers to comply with Jedec
Don't print the DDR3 time bases
Decode the FTB fields of DDR3 tCk, tAA, tRCD, tRP and tRC
Fix speed and PC3 number of high-speed DDR3 modules
Decode DDR3 reference card revision
Print width of all known DDR3 module types
Print physical characteristics for all DDR3 module types
Don't print raw SSTE32882 register values
Add support for Load Reduced DIMM (LRDIMM) DDR3 modules
Fully decode the DDR3 SDRAM Device Type field
Fix DDR3 extended temp range refresh rate decoding
Encode "degrees" to HTML degree symbol
Generate XHTML 1.1 compliant markup
Add a manual page
Correctly check for out-of-bounds vendor ID
Update manufacturer IDs (JEP106AQ)
decode-vaio: Add a manual page
eeprog: Add a manual page
Moved to a separate subdirectory
Increase delay after writes
eeprom: Add a manual page
Marked as deprecated
eepromer: Add a manual page
Marked as deprecated
i2cdetect: Do a best effort detection if functionality is missing
Clarify the SMBus commands used for probing by default
i2ctransfer: New tool to send user-defined I2C messages in one transfer
i2c-dev.h: Minimize differences with kernel flavor
Move SMBus helper functions to include/i2c/smbus.h
i2c-stub-from-dump: Be more tolerant on input dump format
library: New libi2c library
Properly propagate real error codes on read errors
Use I2C_SMBUS_BLOCK_MAX instead of hard-coding 32
lib/smbus.c: Add missing include which was causing a build error
py-smbus: Fix module level docs
Add support for python 3
Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
---
config/rootfiles/common/i2c-tools | 9 +++++++++
lfs/i2c-tools | 8 +++++---
2 files changed, 14 insertions(+), 3 deletions(-)
diff --git a/config/rootfiles/common/i2c-tools b/config/rootfiles/common/i2c-tools
index fb5ee8326..7dec1eec1 100644
--- a/config/rootfiles/common/i2c-tools
+++ b/config/rootfiles/common/i2c-tools
@@ -2,15 +2,24 @@ usr/bin/ddcmon
usr/bin/decode-dimms
usr/bin/decode-edid
usr/bin/decode-vaio
+#usr/include/i2c
+#usr/include/i2c/smbus.h
+#usr/lib/libi2c.so
+usr/lib/libi2c.so.0
+usr/lib/libi2c.so.0.1.1
usr/sbin/i2c-stub-from-dump
usr/sbin/i2cdetect
usr/sbin/i2cdump
usr/sbin/i2cget
usr/sbin/i2cset
+usr/sbin/i2ctransfer
#usr/share/man/man1/decode-dimms.1
#usr/share/man/man1/decode-vaio.1
+#usr/share/man/man3/libi2c.3
#usr/share/man/man8/i2c-stub-from-dump.8
#usr/share/man/man8/i2cdetect.8
#usr/share/man/man8/i2cdump.8
#usr/share/man/man8/i2cget.8
#usr/share/man/man8/i2cset.8
+#usr/share/man/man8/i2ctransfer.8
+
diff --git a/lfs/i2c-tools b/lfs/i2c-tools
index 9910afe53..cb3a9e0b6 100644
--- a/lfs/i2c-tools
+++ b/lfs/i2c-tools
@@ -24,7 +24,7 @@
include Config
-VER = 3.1.2
+VER = 4.3
THISAPP = i2c-tools-$(VER)
DL_FILE = $(THISAPP).tar.xz
@@ -40,7 +40,7 @@ objects = $(DL_FILE)
$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
-$(DL_FILE)_BLAKE2 = 7c1a4ac9034a33bffed989b7c960bfadafc537007561a5c4ced231ae999691a0a76f5f1a2df41bddae1537bf7b627e2b09788dc056af16b58da4af3d647a4b21
+$(DL_FILE)_BLAKE2 = c7300224c8d32785cd067b632bf0e9591f05264b1572f44aebda5f30a95164732d606710c13739ccb7899476219ceb3033beaf95b718ed7e18122f9181dc13fc
install : $(TARGET)
@@ -74,6 +74,8 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
@$(PREBUILD)
@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
cd $(DIR_APP) && make $(MAKETUNING)
- cd $(DIR_APP) && make install prefix=/usr
+ cd $(DIR_APP) && make install PREFIX=/usr \
+ BUILD_DYNAMIC_LIB=1 \
+ BUILD_STATIC_LIB=0
@rm -rf $(DIR_APP)
@$(POSTBUILD)
--
2.37.0
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] i2c-tools: Update to version 4.3
2022-07-10 21:02 [PATCH] i2c-tools: Update to version 4.3 Adolf Belka
@ 2022-07-11 10:14 ` Peter Müller
0 siblings, 0 replies; 2+ messages in thread
From: Peter Müller @ 2022-07-11 10:14 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 8846 bytes --]
Reviewed-by: Peter Müller <peter.mueller(a)ipfire.org>
> - Update from version 3.1.2 (July 2017) to 4.3 (July 2021)
> - Update of rootfile
> - Changelog
> 4.3 (2021-07-22)
> decode-dimms: Attempt to decode LPDDR3 modules
> eeprom, eepromer: Removed the tools in favor of eeprog
> i2cdetect: Sort the bus list by number
> i2cdump: Add range support to I2C block mode
> Deprecate SMBus block mode
> i2cget: Add support for I2C block read
> Add support for SMBus block read
> i2ctransfer: Reverted check for returned length from driver
> 4.2 (2020-09-22)
> manpages: Add BUGS section to let people know how to contact us
> Makefile: Allow to preset all CFLAGS and LDFLAGS variables
> tools: Consistently use snprintf instead of sprintf
> Restrict addresses 0x03-0x07, too (defined by I2C standard)
> decode-dimms: Print SPD revision for DDR3 too
> Print primary bus width for DDR3 and DDR4
> List ee1004 as a candidate driver
> Display MAC for DDR3
> Add MAC abbreviation for DDR4
> Round DDR4 speed properly
> Detect and report truncated input files
> Print kernel driver used
> Print DDR memory speed in MT/s
> Add DDR5 memory types
> Decode manufacturing data for LPDDR3
> Fix the version string
> Point the user to the right drivers
> Update the list of vendors to Jedec JEP106BB
> decode-vaio: Add support for the at24 driver
> Scan more i2c buses
> i2cset: Fix short writes with mask
> i2ctransfer: Mention '-a' everywhere in the manpage
> Support messages using I2C_M_RECV_LEN
> Add check for returned length from driver
> i2c-stub-from-dump: Read dumps from hexdump -C
> library: Add a manual page to document the API
> 4.1 (2018-11-30)
> Makefile: Make STRIP, DESTDIR and PREFIX overridable
> tools: Fix potential buffer overflows in i2cbusses
> Fix build race
> Allow usage of reserved addresses with the '-a' flag
> decode-dimms: Add preliminary DDR4 support
> Decode size and timings of DDR4
> Decode misc parameters of DDR4
> Decode physical characteristics of DDR4
> Documentation update for DDR4
> Verify the CRC of DDR4 data block 1
> Update manufacturer IDs (JEP106AX)
> eeprog: Fix ambiguous parentheses
> Fix build race
> i2ctransfer: Rename option '-f' to '-a' for consistency
> i2c-dev.h: Delete
> library: Fix build race
> Allow disabling the dynamic flavor
> Mention the correct license in source files
> py-smbus: Fix i2c_smbus_* error propagation
> 4.0 (2017-10-30)
> tools: Fix build with recent compilers (gcc 4.6+)
> Add examples to the manual pages
> README: Clarify licenses
> Mention the current maintainer
> decode-dimms: Decode module configuration type of DDR2 SDRAM
> Decode bus width extension of DDR3 SDRAM
> Don't choke when no EEPROM is found
> Don't make columns larger than they need to be
> Make side-by-side output more robust
> Print module organization of DDR SDRAM
> Merge cells by default in side-by-side output
> Print extra timing values of DDR SDRAM
> Print DDR and DDR2 core timings for all supported CAS values
> Print DDR2 equivalent speed of tCK max
> Don't print undefined DDR2 SDRAM timings
> Print SDR, DDR, DDR2, DDR3 core timings for all standard speeds
> Update manufacturer IDs
> Make DDR3 manufacturer count parity error non-fatal
> Strip former manufacturer name in side-by-side output mode
> Remove duplicate "ns" in SDR timings
> Add section headers for SDR modules
> Fix decoding of SDR SPD revision
> Prevent hang on reserved DDR3 module type
> Decode more DDR3 module types
> Fix DDR3 tRAS decoding
> Fix DDR3 core timings rounding
> Round down PC3 numbers to comply with Jedec
> Don't print the DDR3 time bases
> Decode the FTB fields of DDR3 tCk, tAA, tRCD, tRP and tRC
> Fix speed and PC3 number of high-speed DDR3 modules
> Decode DDR3 reference card revision
> Print width of all known DDR3 module types
> Print physical characteristics for all DDR3 module types
> Don't print raw SSTE32882 register values
> Add support for Load Reduced DIMM (LRDIMM) DDR3 modules
> Fully decode the DDR3 SDRAM Device Type field
> Fix DDR3 extended temp range refresh rate decoding
> Encode "degrees" to HTML degree symbol
> Generate XHTML 1.1 compliant markup
> Add a manual page
> Correctly check for out-of-bounds vendor ID
> Update manufacturer IDs (JEP106AQ)
> decode-vaio: Add a manual page
> eeprog: Add a manual page
> Moved to a separate subdirectory
> Increase delay after writes
> eeprom: Add a manual page
> Marked as deprecated
> eepromer: Add a manual page
> Marked as deprecated
> i2cdetect: Do a best effort detection if functionality is missing
> Clarify the SMBus commands used for probing by default
> i2ctransfer: New tool to send user-defined I2C messages in one transfer
> i2c-dev.h: Minimize differences with kernel flavor
> Move SMBus helper functions to include/i2c/smbus.h
> i2c-stub-from-dump: Be more tolerant on input dump format
> library: New libi2c library
> Properly propagate real error codes on read errors
> Use I2C_SMBUS_BLOCK_MAX instead of hard-coding 32
> lib/smbus.c: Add missing include which was causing a build error
> py-smbus: Fix module level docs
> Add support for python 3
>
> Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
> ---
> config/rootfiles/common/i2c-tools | 9 +++++++++
> lfs/i2c-tools | 8 +++++---
> 2 files changed, 14 insertions(+), 3 deletions(-)
>
> diff --git a/config/rootfiles/common/i2c-tools b/config/rootfiles/common/i2c-tools
> index fb5ee8326..7dec1eec1 100644
> --- a/config/rootfiles/common/i2c-tools
> +++ b/config/rootfiles/common/i2c-tools
> @@ -2,15 +2,24 @@ usr/bin/ddcmon
> usr/bin/decode-dimms
> usr/bin/decode-edid
> usr/bin/decode-vaio
> +#usr/include/i2c
> +#usr/include/i2c/smbus.h
> +#usr/lib/libi2c.so
> +usr/lib/libi2c.so.0
> +usr/lib/libi2c.so.0.1.1
> usr/sbin/i2c-stub-from-dump
> usr/sbin/i2cdetect
> usr/sbin/i2cdump
> usr/sbin/i2cget
> usr/sbin/i2cset
> +usr/sbin/i2ctransfer
> #usr/share/man/man1/decode-dimms.1
> #usr/share/man/man1/decode-vaio.1
> +#usr/share/man/man3/libi2c.3
> #usr/share/man/man8/i2c-stub-from-dump.8
> #usr/share/man/man8/i2cdetect.8
> #usr/share/man/man8/i2cdump.8
> #usr/share/man/man8/i2cget.8
> #usr/share/man/man8/i2cset.8
> +#usr/share/man/man8/i2ctransfer.8
> +
> diff --git a/lfs/i2c-tools b/lfs/i2c-tools
> index 9910afe53..cb3a9e0b6 100644
> --- a/lfs/i2c-tools
> +++ b/lfs/i2c-tools
> @@ -24,7 +24,7 @@
>
> include Config
>
> -VER = 3.1.2
> +VER = 4.3
>
> THISAPP = i2c-tools-$(VER)
> DL_FILE = $(THISAPP).tar.xz
> @@ -40,7 +40,7 @@ objects = $(DL_FILE)
>
> $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>
> -$(DL_FILE)_BLAKE2 = 7c1a4ac9034a33bffed989b7c960bfadafc537007561a5c4ced231ae999691a0a76f5f1a2df41bddae1537bf7b627e2b09788dc056af16b58da4af3d647a4b21
> +$(DL_FILE)_BLAKE2 = c7300224c8d32785cd067b632bf0e9591f05264b1572f44aebda5f30a95164732d606710c13739ccb7899476219ceb3033beaf95b718ed7e18122f9181dc13fc
>
> install : $(TARGET)
>
> @@ -74,6 +74,8 @@ $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
> @$(PREBUILD)
> @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
> cd $(DIR_APP) && make $(MAKETUNING)
> - cd $(DIR_APP) && make install prefix=/usr
> + cd $(DIR_APP) && make install PREFIX=/usr \
> + BUILD_DYNAMIC_LIB=1 \
> + BUILD_STATIC_LIB=0
> @rm -rf $(DIR_APP)
> @$(POSTBUILD)
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-07-11 10:14 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-07-10 21:02 [PATCH] i2c-tools: Update to version 4.3 Adolf Belka
2022-07-11 10:14 ` Peter Müller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox