[PATCH] Core Update 169: Regenerate initrds and save space on ARM

[PATCH] Core Update 169: Regenerate initrds and save space on ARM

[Peter Müller]

[-- Attachment #1: Type: text/plain, Size: 1049 bytes --]

https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186

Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
---
 config/rootfiles/core/169/update.sh | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/config/rootfiles/core/169/update.sh b/config/rootfiles/core/169/update.sh
index 3902e2d45..50f0bd8a4 100644
--- a/config/rootfiles/core/169/update.sh
+++ b/config/rootfiles/core/169/update.sh
@@ -150,6 +150,19 @@ ldconfig
 # Apply sysctl changes
 /etc/init.d/sysctl start
 
+# Regenerate all initrds
+dracut --regenerate-all --force
+case "$(uname -m)" in
+	armv*)
+		mkimage -A arm -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
+		rm /boot/initramfs-${KVER}-ipfire.img
+		;;
+	aarch64)
+		mkimage -A arm64 -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
+		# dont remove initramfs because grub need this to boot.
+		;;
+esac
+
 # Start services
 telinit u
 /etc/init.d/firewall restart
-- 
2.35.3

Re: [PATCH] Core Update 169: Regenerate initrds and save space on ARM

[Peter Müller]

[-- Attachment #1: Type: text/plain, Size: 1494 bytes --]

Hello *,

to my understanding, we do not need to ship "linux-initrd" if we can easily
rebuild those on the systems anyway. I would prefer the latter, since that
keeps the update smaller.

This was also raised somewhere in the community a while ago, but I am unable
to find the correspondent thread at the moment.

How do we proceed here?

Thanks, and best regards,
Peter Müller


> https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186
> 
> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
> ---
>  config/rootfiles/core/169/update.sh | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/config/rootfiles/core/169/update.sh b/config/rootfiles/core/169/update.sh
> index 3902e2d45..50f0bd8a4 100644
> --- a/config/rootfiles/core/169/update.sh
> +++ b/config/rootfiles/core/169/update.sh
> @@ -150,6 +150,19 @@ ldconfig
>  # Apply sysctl changes
>  /etc/init.d/sysctl start
>  
> +# Regenerate all initrds
> +dracut --regenerate-all --force
> +case "$(uname -m)" in
> +	armv*)
> +		mkimage -A arm -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
> +		rm /boot/initramfs-${KVER}-ipfire.img
> +		;;
> +	aarch64)
> +		mkimage -A arm64 -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
> +		# dont remove initramfs because grub need this to boot.
> +		;;
> +esac
> +
>  # Start services
>  telinit u
>  /etc/init.d/firewall restart

Re: [PATCH] Core Update 169: Regenerate initrds and save space on ARM

[Michael Tremer]

[-- Attachment #1: Type: text/plain, Size: 2118 bytes --]

Hello,

Indeed we don’t need to ship them, we can generate them instead.

But that has of course some downsides, too:

* It is slow
* It is not entirely error-proof (out of disk space, out of memory, system being rebooted too early)

I do not really have much of a preference. The only thing I want to say is that ARM needs to get their shit together and being able to load a regular image instead of asking for extra commands here - or build that into dracut.

-Michael

> On 7 Jul 2022, at 07:48, Peter Müller <peter.mueller(a)ipfire.org> wrote:
> 
> Hello *,
> 
> to my understanding, we do not need to ship "linux-initrd" if we can easily
> rebuild those on the systems anyway. I would prefer the latter, since that
> keeps the update smaller.
> 
> This was also raised somewhere in the community a while ago, but I am unable
> to find the correspondent thread at the moment.
> 
> How do we proceed here?
> 
> Thanks, and best regards,
> Peter Müller
> 
> 
>> https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186
>> 
>> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
>> ---
>> config/rootfiles/core/169/update.sh | 13 +++++++++++++
>> 1 file changed, 13 insertions(+)
>> 
>> diff --git a/config/rootfiles/core/169/update.sh b/config/rootfiles/core/169/update.sh
>> index 3902e2d45..50f0bd8a4 100644
>> --- a/config/rootfiles/core/169/update.sh
>> +++ b/config/rootfiles/core/169/update.sh
>> @@ -150,6 +150,19 @@ ldconfig
>> # Apply sysctl changes
>> /etc/init.d/sysctl start
>> 
>> +# Regenerate all initrds
>> +dracut --regenerate-all --force
>> +case "$(uname -m)" in
>> +	armv*)
>> +		mkimage -A arm -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>> +		rm /boot/initramfs-${KVER}-ipfire.img
>> +		;;
>> +	aarch64)
>> +		mkimage -A arm64 -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>> +		# dont remove initramfs because grub need this to boot.
>> +		;;
>> +esac
>> +
>> # Start services
>> telinit u
>> /etc/init.d/firewall restart

Re: [PATCH] Core Update 169: Regenerate initrds and save space on ARM

[Peter Müller]

[-- Attachment #1: Type: text/plain, Size: 2727 bytes --]

Hello Michael,

thanks for your reply.

> Hello,
> 
> Indeed we don’t need to ship them, we can generate them instead.
> 
> But that has of course some downsides, too:
> 
> * It is slow
> * It is not entirely error-proof (out of disk space, out of memory, system being rebooted too early)

So I guess the first newly introduced line ("dracut --regenerate-all --force") of
my patch is obsolete then, as the initrds are already there - we just need the directives
for ARM.

To my understanding, if dracut fails due to space/memory issues, the upgrade would have
failed either way.

Do you want me to submit a v2 of this patch without the dracut directive? Or should I
commit this straight to next, and you cherry-pick it into master?

Thanks, and best regards,
Peter Müller

> 
> I do not really have much of a preference. The only thing I want to say is that ARM needs to get their shit together and being able to load a regular image instead of asking for extra commands here - or build that into dracut.
> 
> -Michael
> 
>> On 7 Jul 2022, at 07:48, Peter Müller <peter.mueller(a)ipfire.org> wrote:
>>
>> Hello *,
>>
>> to my understanding, we do not need to ship "linux-initrd" if we can easily
>> rebuild those on the systems anyway. I would prefer the latter, since that
>> keeps the update smaller.
>>
>> This was also raised somewhere in the community a while ago, but I am unable
>> to find the correspondent thread at the moment.
>>
>> How do we proceed here?
>>
>> Thanks, and best regards,
>> Peter Müller
>>
>>
>>> https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186
>>>
>>> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
>>> ---
>>> config/rootfiles/core/169/update.sh | 13 +++++++++++++
>>> 1 file changed, 13 insertions(+)
>>>
>>> diff --git a/config/rootfiles/core/169/update.sh b/config/rootfiles/core/169/update.sh
>>> index 3902e2d45..50f0bd8a4 100644
>>> --- a/config/rootfiles/core/169/update.sh
>>> +++ b/config/rootfiles/core/169/update.sh
>>> @@ -150,6 +150,19 @@ ldconfig
>>> # Apply sysctl changes
>>> /etc/init.d/sysctl start
>>>
>>> +# Regenerate all initrds
>>> +dracut --regenerate-all --force
>>> +case "$(uname -m)" in
>>> +	armv*)
>>> +		mkimage -A arm -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>>> +		rm /boot/initramfs-${KVER}-ipfire.img
>>> +		;;
>>> +	aarch64)
>>> +		mkimage -A arm64 -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>>> +		# dont remove initramfs because grub need this to boot.
>>> +		;;
>>> +esac
>>> +
>>> # Start services
>>> telinit u
>>> /etc/init.d/firewall restart
> 

Re: [PATCH] Core Update 169: Regenerate initrds and save space on ARM

[Michael Tremer]

[-- Attachment #1: Type: text/plain, Size: 3244 bytes --]

Hello,

> On 7 Jul 2022, at 15:30, Peter Müller <peter.mueller(a)ipfire.org> wrote:
> 
> Hello Michael,
> 
> thanks for your reply.
> 
>> Hello,
>> Indeed we don’t need to ship them, we can generate them instead.
>> But that has of course some downsides, too:
>> * It is slow
>> * It is not entirely error-proof (out of disk space, out of memory, system being rebooted too early)
> 
> So I guess the first newly introduced line ("dracut --regenerate-all --force") of
> my patch is obsolete then, as the initrds are already there - we just need the directives
> for ARM.

Those should be shipped, too. Adding more size to the updater when shipping the same stuff multiple times.

> To my understanding, if dracut fails due to space/memory issues, the upgrade would have
> failed either way.

My point was that extracting the update would consume less memory. Disk space constraints still apply unless there is not enough temporary space.

> Do you want me to submit a v2 of this patch without the dracut directive? Or should I
> commit this straight to next, and you cherry-pick it into master?

We should either ship everything, or generate everything. I don’t think a mix is good idea.

> Thanks, and best regards,
> Peter Müller
> 
>> I do not really have much of a preference. The only thing I want to say is that ARM needs to get their shit together and being able to load a regular image instead of asking for extra commands here - or build that into dracut.
>> -Michael
>>> On 7 Jul 2022, at 07:48, Peter Müller <peter.mueller(a)ipfire.org> wrote:
>>> 
>>> Hello *,
>>> 
>>> to my understanding, we do not need to ship "linux-initrd" if we can easily
>>> rebuild those on the systems anyway. I would prefer the latter, since that
>>> keeps the update smaller.
>>> 
>>> This was also raised somewhere in the community a while ago, but I am unable
>>> to find the correspondent thread at the moment.
>>> 
>>> How do we proceed here?
>>> 
>>> Thanks, and best regards,
>>> Peter Müller
>>> 
>>> 
>>>> https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186
>>>> 
>>>> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
>>>> ---
>>>> config/rootfiles/core/169/update.sh | 13 +++++++++++++
>>>> 1 file changed, 13 insertions(+)
>>>> 
>>>> diff --git a/config/rootfiles/core/169/update.sh b/config/rootfiles/core/169/update.sh
>>>> index 3902e2d45..50f0bd8a4 100644
>>>> --- a/config/rootfiles/core/169/update.sh
>>>> +++ b/config/rootfiles/core/169/update.sh
>>>> @@ -150,6 +150,19 @@ ldconfig
>>>> # Apply sysctl changes
>>>> /etc/init.d/sysctl start
>>>> 
>>>> +# Regenerate all initrds
>>>> +dracut --regenerate-all --force
>>>> +case "$(uname -m)" in
>>>> +	armv*)
>>>> +		mkimage -A arm -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>>>> +		rm /boot/initramfs-${KVER}-ipfire.img
>>>> +		;;
>>>> +	aarch64)
>>>> +		mkimage -A arm64 -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>>>> +		# dont remove initramfs because grub need this to boot.
>>>> +		;;
>>>> +esac
>>>> +
>>>> # Start services
>>>> telinit u
>>>> /etc/init.d/firewall restart

Re: [PATCH] Core Update 169: Regenerate initrds and save space on ARM

[Peter Müller]

[-- Attachment #1: Type: text/plain, Size: 3660 bytes --]

Hello Michael,

> Hello,
> 
>> On 7 Jul 2022, at 15:30, Peter Müller <peter.mueller(a)ipfire.org> wrote:
>>
>> Hello Michael,
>>
>> thanks for your reply.
>>
>>> Hello,
>>> Indeed we don’t need to ship them, we can generate them instead.
>>> But that has of course some downsides, too:
>>> * It is slow
>>> * It is not entirely error-proof (out of disk space, out of memory, system being rebooted too early)
>>
>> So I guess the first newly introduced line ("dracut --regenerate-all --force") of
>> my patch is obsolete then, as the initrds are already there - we just need the directives
>> for ARM.
> 
> Those should be shipped, too. Adding more size to the updater when shipping the same stuff multiple times.
> 
>> To my understanding, if dracut fails due to space/memory issues, the upgrade would have
>> failed either way.
> 
> My point was that extracting the update would consume less memory. Disk space constraints still apply unless there is not enough temporary space.
> 
>> Do you want me to submit a v2 of this patch without the dracut directive? Or should I
>> commit this straight to next, and you cherry-pick it into master?
> 
> We should either ship everything, or generate everything. I don’t think a mix is good idea.

agreed.

Then, this boils down to an "rm" statement on 32-bit ARM, and I will omit regenerating
the initds - that's how Core Update 169 has been thus far, and there were no complaints
whatsoever.

I will push this straight to next and get back to you shortly...

Thanks, and best regards,
Peter Müller

> 
>> Thanks, and best regards,
>> Peter Müller
>>
>>> I do not really have much of a preference. The only thing I want to say is that ARM needs to get their shit together and being able to load a regular image instead of asking for extra commands here - or build that into dracut.
>>> -Michael
>>>> On 7 Jul 2022, at 07:48, Peter Müller <peter.mueller(a)ipfire.org> wrote:
>>>>
>>>> Hello *,
>>>>
>>>> to my understanding, we do not need to ship "linux-initrd" if we can easily
>>>> rebuild those on the systems anyway. I would prefer the latter, since that
>>>> keeps the update smaller.
>>>>
>>>> This was also raised somewhere in the community a while ago, but I am unable
>>>> to find the correspondent thread at the moment.
>>>>
>>>> How do we proceed here?
>>>>
>>>> Thanks, and best regards,
>>>> Peter Müller
>>>>
>>>>
>>>>> https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186
>>>>>
>>>>> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
>>>>> ---
>>>>> config/rootfiles/core/169/update.sh | 13 +++++++++++++
>>>>> 1 file changed, 13 insertions(+)
>>>>>
>>>>> diff --git a/config/rootfiles/core/169/update.sh b/config/rootfiles/core/169/update.sh
>>>>> index 3902e2d45..50f0bd8a4 100644
>>>>> --- a/config/rootfiles/core/169/update.sh
>>>>> +++ b/config/rootfiles/core/169/update.sh
>>>>> @@ -150,6 +150,19 @@ ldconfig
>>>>> # Apply sysctl changes
>>>>> /etc/init.d/sysctl start
>>>>>
>>>>> +# Regenerate all initrds
>>>>> +dracut --regenerate-all --force
>>>>> +case "$(uname -m)" in
>>>>> +	armv*)
>>>>> +		mkimage -A arm -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>>>>> +		rm /boot/initramfs-${KVER}-ipfire.img
>>>>> +		;;
>>>>> +	aarch64)
>>>>> +		mkimage -A arm64 -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>>>>> +		# dont remove initramfs because grub need this to boot.
>>>>> +		;;
>>>>> +esac
>>>>> +
>>>>> # Start services
>>>>> telinit u
>>>>> /etc/init.d/firewall restart
> 

Re: [PATCH] Core Update 169: Regenerate initrds and save space on ARM

[Michael Tremer]

[-- Attachment #1: Type: text/plain, Size: 3908 bytes --]

Hello,

> On 7 Jul 2022, at 15:49, Peter Müller <peter.mueller(a)ipfire.org> wrote:
> 
> Hello Michael,
> 
>> Hello,
>>> On 7 Jul 2022, at 15:30, Peter Müller <peter.mueller(a)ipfire.org> wrote:
>>> 
>>> Hello Michael,
>>> 
>>> thanks for your reply.
>>> 
>>>> Hello,
>>>> Indeed we don’t need to ship them, we can generate them instead.
>>>> But that has of course some downsides, too:
>>>> * It is slow
>>>> * It is not entirely error-proof (out of disk space, out of memory, system being rebooted too early)
>>> 
>>> So I guess the first newly introduced line ("dracut --regenerate-all --force") of
>>> my patch is obsolete then, as the initrds are already there - we just need the directives
>>> for ARM.
>> Those should be shipped, too. Adding more size to the updater when shipping the same stuff multiple times.
>>> To my understanding, if dracut fails due to space/memory issues, the upgrade would have
>>> failed either way.
>> My point was that extracting the update would consume less memory. Disk space constraints still apply unless there is not enough temporary space.
>>> Do you want me to submit a v2 of this patch without the dracut directive? Or should I
>>> commit this straight to next, and you cherry-pick it into master?
>> We should either ship everything, or generate everything. I don’t think a mix is good idea.
> 
> agreed.
> 
> Then, this boils down to an "rm" statement on 32-bit ARM, and I will omit regenerating
> the initds - that's how Core Update 169 has been thus far, and there were no complaints
> whatsoever.
> 
> I will push this straight to next and get back to you shortly...

We probably don’t want this in next. That already has c170.

> 
> Thanks, and best regards,
> Peter Müller
> 
>>> Thanks, and best regards,
>>> Peter Müller
>>> 
>>>> I do not really have much of a preference. The only thing I want to say is that ARM needs to get their shit together and being able to load a regular image instead of asking for extra commands here - or build that into dracut.
>>>> -Michael
>>>>> On 7 Jul 2022, at 07:48, Peter Müller <peter.mueller(a)ipfire.org> wrote:
>>>>> 
>>>>> Hello *,
>>>>> 
>>>>> to my understanding, we do not need to ship "linux-initrd" if we can easily
>>>>> rebuild those on the systems anyway. I would prefer the latter, since that
>>>>> keeps the update smaller.
>>>>> 
>>>>> This was also raised somewhere in the community a while ago, but I am unable
>>>>> to find the correspondent thread at the moment.
>>>>> 
>>>>> How do we proceed here?
>>>>> 
>>>>> Thanks, and best regards,
>>>>> Peter Müller
>>>>> 
>>>>> 
>>>>>> https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186
>>>>>> 
>>>>>> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
>>>>>> ---
>>>>>> config/rootfiles/core/169/update.sh | 13 +++++++++++++
>>>>>> 1 file changed, 13 insertions(+)
>>>>>> 
>>>>>> diff --git a/config/rootfiles/core/169/update.sh b/config/rootfiles/core/169/update.sh
>>>>>> index 3902e2d45..50f0bd8a4 100644
>>>>>> --- a/config/rootfiles/core/169/update.sh
>>>>>> +++ b/config/rootfiles/core/169/update.sh
>>>>>> @@ -150,6 +150,19 @@ ldconfig
>>>>>> # Apply sysctl changes
>>>>>> /etc/init.d/sysctl start
>>>>>> 
>>>>>> +# Regenerate all initrds
>>>>>> +dracut --regenerate-all --force
>>>>>> +case "$(uname -m)" in
>>>>>> +	armv*)
>>>>>> +		mkimage -A arm -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>>>>>> +		rm /boot/initramfs-${KVER}-ipfire.img
>>>>>> +		;;
>>>>>> +	aarch64)
>>>>>> +		mkimage -A arm64 -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>>>>>> +		# dont remove initramfs because grub need this to boot.
>>>>>> +		;;
>>>>>> +esac
>>>>>> +
>>>>>> # Start services
>>>>>> telinit u
>>>>>> /etc/init.d/firewall restart

Re: [PATCH] Core Update 169: Regenerate initrds and save space on ARM

[Peter Müller]

[-- Attachment #1: Type: text/plain, Size: 4172 bytes --]

Hello Michael,

> Hello,
> 
>> On 7 Jul 2022, at 15:49, Peter Müller <peter.mueller(a)ipfire.org> wrote:
>>
>> Hello Michael,
>>
>>> Hello,
>>>> On 7 Jul 2022, at 15:30, Peter Müller <peter.mueller(a)ipfire.org> wrote:
>>>>
>>>> Hello Michael,
>>>>
>>>> thanks for your reply.
>>>>
>>>>> Hello,
>>>>> Indeed we don’t need to ship them, we can generate them instead.
>>>>> But that has of course some downsides, too:
>>>>> * It is slow
>>>>> * It is not entirely error-proof (out of disk space, out of memory, system being rebooted too early)
>>>>
>>>> So I guess the first newly introduced line ("dracut --regenerate-all --force") of
>>>> my patch is obsolete then, as the initrds are already there - we just need the directives
>>>> for ARM.
>>> Those should be shipped, too. Adding more size to the updater when shipping the same stuff multiple times.
>>>> To my understanding, if dracut fails due to space/memory issues, the upgrade would have
>>>> failed either way.
>>> My point was that extracting the update would consume less memory. Disk space constraints still apply unless there is not enough temporary space.
>>>> Do you want me to submit a v2 of this patch without the dracut directive? Or should I
>>>> commit this straight to next, and you cherry-pick it into master?
>>> We should either ship everything, or generate everything. I don’t think a mix is good idea.
>>
>> agreed.
>>
>> Then, this boils down to an "rm" statement on 32-bit ARM, and I will omit regenerating
>> the initds - that's how Core Update 169 has been thus far, and there were no complaints
>> whatsoever.
>>
>> I will push this straight to next and get back to you shortly...
> 
> We probably don’t want this in next. That already has c170.

true, but I cannot push to "master". Is it feasible for you to cherry-pick 5ead33d796b9537bddbc4e2d5d27029de4df001a?

Thanks, and best regards,
Peter Müller
> 
>>
>> Thanks, and best regards,
>> Peter Müller
>>
>>>> Thanks, and best regards,
>>>> Peter Müller
>>>>
>>>>> I do not really have much of a preference. The only thing I want to say is that ARM needs to get their shit together and being able to load a regular image instead of asking for extra commands here - or build that into dracut.
>>>>> -Michael
>>>>>> On 7 Jul 2022, at 07:48, Peter Müller <peter.mueller(a)ipfire.org> wrote:
>>>>>>
>>>>>> Hello *,
>>>>>>
>>>>>> to my understanding, we do not need to ship "linux-initrd" if we can easily
>>>>>> rebuild those on the systems anyway. I would prefer the latter, since that
>>>>>> keeps the update smaller.
>>>>>>
>>>>>> This was also raised somewhere in the community a while ago, but I am unable
>>>>>> to find the correspondent thread at the moment.
>>>>>>
>>>>>> How do we proceed here?
>>>>>>
>>>>>> Thanks, and best regards,
>>>>>> Peter Müller
>>>>>>
>>>>>>
>>>>>>> https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186
>>>>>>>
>>>>>>> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
>>>>>>> ---
>>>>>>> config/rootfiles/core/169/update.sh | 13 +++++++++++++
>>>>>>> 1 file changed, 13 insertions(+)
>>>>>>>
>>>>>>> diff --git a/config/rootfiles/core/169/update.sh b/config/rootfiles/core/169/update.sh
>>>>>>> index 3902e2d45..50f0bd8a4 100644
>>>>>>> --- a/config/rootfiles/core/169/update.sh
>>>>>>> +++ b/config/rootfiles/core/169/update.sh
>>>>>>> @@ -150,6 +150,19 @@ ldconfig
>>>>>>> # Apply sysctl changes
>>>>>>> /etc/init.d/sysctl start
>>>>>>>
>>>>>>> +# Regenerate all initrds
>>>>>>> +dracut --regenerate-all --force
>>>>>>> +case "$(uname -m)" in
>>>>>>> +	armv*)
>>>>>>> +		mkimage -A arm -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>>>>>>> +		rm /boot/initramfs-${KVER}-ipfire.img
>>>>>>> +		;;
>>>>>>> +	aarch64)
>>>>>>> +		mkimage -A arm64 -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>>>>>>> +		# dont remove initramfs because grub need this to boot.
>>>>>>> +		;;
>>>>>>> +esac
>>>>>>> +
>>>>>>> # Start services
>>>>>>> telinit u
>>>>>>> /etc/init.d/firewall restart
> 

Re: [PATCH] Core Update 169: Regenerate initrds and save space on ARM

[Michael Tremer]

[-- Attachment #1: Type: text/plain, Size: 4413 bytes --]

Please just send a patch to the list :)

> On 7 Jul 2022, at 15:54, Peter Müller <peter.mueller(a)ipfire.org> wrote:
> 
> Hello Michael,
> 
>> Hello,
>>> On 7 Jul 2022, at 15:49, Peter Müller <peter.mueller(a)ipfire.org> wrote:
>>> 
>>> Hello Michael,
>>> 
>>>> Hello,
>>>>> On 7 Jul 2022, at 15:30, Peter Müller <peter.mueller(a)ipfire.org> wrote:
>>>>> 
>>>>> Hello Michael,
>>>>> 
>>>>> thanks for your reply.
>>>>> 
>>>>>> Hello,
>>>>>> Indeed we don’t need to ship them, we can generate them instead.
>>>>>> But that has of course some downsides, too:
>>>>>> * It is slow
>>>>>> * It is not entirely error-proof (out of disk space, out of memory, system being rebooted too early)
>>>>> 
>>>>> So I guess the first newly introduced line ("dracut --regenerate-all --force") of
>>>>> my patch is obsolete then, as the initrds are already there - we just need the directives
>>>>> for ARM.
>>>> Those should be shipped, too. Adding more size to the updater when shipping the same stuff multiple times.
>>>>> To my understanding, if dracut fails due to space/memory issues, the upgrade would have
>>>>> failed either way.
>>>> My point was that extracting the update would consume less memory. Disk space constraints still apply unless there is not enough temporary space.
>>>>> Do you want me to submit a v2 of this patch without the dracut directive? Or should I
>>>>> commit this straight to next, and you cherry-pick it into master?
>>>> We should either ship everything, or generate everything. I don’t think a mix is good idea.
>>> 
>>> agreed.
>>> 
>>> Then, this boils down to an "rm" statement on 32-bit ARM, and I will omit regenerating
>>> the initds - that's how Core Update 169 has been thus far, and there were no complaints
>>> whatsoever.
>>> 
>>> I will push this straight to next and get back to you shortly...
>> We probably don’t want this in next. That already has c170.
> 
> true, but I cannot push to "master". Is it feasible for you to cherry-pick 5ead33d796b9537bddbc4e2d5d27029de4df001a?
> 
> Thanks, and best regards,
> Peter Müller
>>> 
>>> Thanks, and best regards,
>>> Peter Müller
>>> 
>>>>> Thanks, and best regards,
>>>>> Peter Müller
>>>>> 
>>>>>> I do not really have much of a preference. The only thing I want to say is that ARM needs to get their shit together and being able to load a regular image instead of asking for extra commands here - or build that into dracut.
>>>>>> -Michael
>>>>>>> On 7 Jul 2022, at 07:48, Peter Müller <peter.mueller(a)ipfire.org> wrote:
>>>>>>> 
>>>>>>> Hello *,
>>>>>>> 
>>>>>>> to my understanding, we do not need to ship "linux-initrd" if we can easily
>>>>>>> rebuild those on the systems anyway. I would prefer the latter, since that
>>>>>>> keeps the update smaller.
>>>>>>> 
>>>>>>> This was also raised somewhere in the community a while ago, but I am unable
>>>>>>> to find the correspondent thread at the moment.
>>>>>>> 
>>>>>>> How do we proceed here?
>>>>>>> 
>>>>>>> Thanks, and best regards,
>>>>>>> Peter Müller
>>>>>>> 
>>>>>>> 
>>>>>>>> https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186
>>>>>>>> 
>>>>>>>> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
>>>>>>>> ---
>>>>>>>> config/rootfiles/core/169/update.sh | 13 +++++++++++++
>>>>>>>> 1 file changed, 13 insertions(+)
>>>>>>>> 
>>>>>>>> diff --git a/config/rootfiles/core/169/update.sh b/config/rootfiles/core/169/update.sh
>>>>>>>> index 3902e2d45..50f0bd8a4 100644
>>>>>>>> --- a/config/rootfiles/core/169/update.sh
>>>>>>>> +++ b/config/rootfiles/core/169/update.sh
>>>>>>>> @@ -150,6 +150,19 @@ ldconfig
>>>>>>>> # Apply sysctl changes
>>>>>>>> /etc/init.d/sysctl start
>>>>>>>> 
>>>>>>>> +# Regenerate all initrds
>>>>>>>> +dracut --regenerate-all --force
>>>>>>>> +case "$(uname -m)" in
>>>>>>>> +	armv*)
>>>>>>>> +		mkimage -A arm -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>>>>>>>> +		rm /boot/initramfs-${KVER}-ipfire.img
>>>>>>>> +		;;
>>>>>>>> +	aarch64)
>>>>>>>> +		mkimage -A arm64 -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>>>>>>>> +		# dont remove initramfs because grub need this to boot.
>>>>>>>> +		;;
>>>>>>>> +esac
>>>>>>>> +
>>>>>>>> # Start services
>>>>>>>> telinit u
>>>>>>>> /etc/init.d/firewall restart

[PATCH v2] Core Update 169: Delete unused initrd on 32-bit ARM to save space in /boot

[Peter Müller]

[-- Attachment #1: Type: text/plain, Size: 919 bytes --]

On 64-bit ARM, this is still needed for booting. Since the initrds were
already shipped with the updater, there is no need to regenerate them
locally again.

https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186

Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
---
 config/rootfiles/core/169/update.sh | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/config/rootfiles/core/169/update.sh b/config/rootfiles/core/169/update.sh
index 3902e2d45..dc7a2a18a 100644
--- a/config/rootfiles/core/169/update.sh
+++ b/config/rootfiles/core/169/update.sh
@@ -150,6 +150,13 @@ ldconfig
 # Apply sysctl changes
 /etc/init.d/sysctl start
 
+# Delete unused initrd on 32-bit ARM to save space in /boot
+case "$(uname -m)" in
+	armv*)
+		rm /boot/initramfs-${KVER}-ipfire.img
+		;;
+esac
+
 # Start services
 telinit u
 /etc/init.d/firewall restart
-- 
2.30.2

Re: [PATCH v2] Core Update 169: Delete unused initrd on 32-bit ARM to save space in /boot

[Michael Tremer]

[-- Attachment #1: Type: text/plain, Size: 1108 bytes --]

Why do we ship this in the first place, then?

> On 7 Jul 2022, at 15:58, Peter Müller <peter.mueller(a)ipfire.org> wrote:
> 
> On 64-bit ARM, this is still needed for booting. Since the initrds were
> already shipped with the updater, there is no need to regenerate them
> locally again.
> 
> https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186
> 
> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
> ---
> config/rootfiles/core/169/update.sh | 7 +++++++
> 1 file changed, 7 insertions(+)
> 
> diff --git a/config/rootfiles/core/169/update.sh b/config/rootfiles/core/169/update.sh
> index 3902e2d45..dc7a2a18a 100644
> --- a/config/rootfiles/core/169/update.sh
> +++ b/config/rootfiles/core/169/update.sh
> @@ -150,6 +150,13 @@ ldconfig
> # Apply sysctl changes
> /etc/init.d/sysctl start
> 
> +# Delete unused initrd on 32-bit ARM to save space in /boot
> +case "$(uname -m)" in
> +	armv*)
> +		rm /boot/initramfs-${KVER}-ipfire.img
> +		;;
> +esac
> +
> # Start services
> telinit u
> /etc/init.d/firewall restart
> -- 
> 2.30.2
> 

Re: [PATCH v2] Core Update 169: Delete unused initrd on 32-bit ARM to save space in /boot

[Peter Müller]

[-- Attachment #1: Type: text/plain, Size: 1188 bytes --]

This is a question for Arne, I'm afraid...

> Why do we ship this in the first place, then?
> 
>> On 7 Jul 2022, at 15:58, Peter Müller <peter.mueller(a)ipfire.org> wrote:
>>
>> On 64-bit ARM, this is still needed for booting. Since the initrds were
>> already shipped with the updater, there is no need to regenerate them
>> locally again.
>>
>> https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186
>>
>> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
>> ---
>> config/rootfiles/core/169/update.sh | 7 +++++++
>> 1 file changed, 7 insertions(+)
>>
>> diff --git a/config/rootfiles/core/169/update.sh b/config/rootfiles/core/169/update.sh
>> index 3902e2d45..dc7a2a18a 100644
>> --- a/config/rootfiles/core/169/update.sh
>> +++ b/config/rootfiles/core/169/update.sh
>> @@ -150,6 +150,13 @@ ldconfig
>> # Apply sysctl changes
>> /etc/init.d/sysctl start
>>
>> +# Delete unused initrd on 32-bit ARM to save space in /boot
>> +case "$(uname -m)" in
>> +	armv*)
>> +		rm /boot/initramfs-${KVER}-ipfire.img
>> +		;;
>> +esac
>> +
>> # Start services
>> telinit u
>> /etc/init.d/firewall restart
>> -- 
>> 2.30.2
>>
> 

Re: [PATCH v2] Core Update 169: Delete unused initrd on 32-bit ARM to save space in /boot

[Michael Tremer]

[-- Attachment #1: Type: text/plain, Size: 1357 bytes --]

Okay, I merged this into master and core169.

> On 7 Jul 2022, at 16:05, Peter Müller <peter.mueller(a)ipfire.org> wrote:
> 
> This is a question for Arne, I'm afraid...
> 
>> Why do we ship this in the first place, then?
>>> On 7 Jul 2022, at 15:58, Peter Müller <peter.mueller(a)ipfire.org> wrote:
>>> 
>>> On 64-bit ARM, this is still needed for booting. Since the initrds were
>>> already shipped with the updater, there is no need to regenerate them
>>> locally again.
>>> 
>>> https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186
>>> 
>>> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
>>> ---
>>> config/rootfiles/core/169/update.sh | 7 +++++++
>>> 1 file changed, 7 insertions(+)
>>> 
>>> diff --git a/config/rootfiles/core/169/update.sh b/config/rootfiles/core/169/update.sh
>>> index 3902e2d45..dc7a2a18a 100644
>>> --- a/config/rootfiles/core/169/update.sh
>>> +++ b/config/rootfiles/core/169/update.sh
>>> @@ -150,6 +150,13 @@ ldconfig
>>> # Apply sysctl changes
>>> /etc/init.d/sysctl start
>>> 
>>> +# Delete unused initrd on 32-bit ARM to save space in /boot
>>> +case "$(uname -m)" in
>>> +	armv*)
>>> +		rm /boot/initramfs-${KVER}-ipfire.img
>>> +		;;
>>> +esac
>>> +
>>> # Start services
>>> telinit u
>>> /etc/init.d/firewall restart
>>> -- 
>>> 2.30.2
>>> 

Re: [PATCH] Core Update 169: Regenerate initrds and save space on ARM

[Peter Müller]

[-- Attachment #1: Type: text/plain, Size: 4052 bytes --]

Hello Jon,

thanks for your reply.

> Peter / Michael,
> 
> 
>> * It is not entirely error-proof (out of disk space, out of memory, system being rebooted too early)
> 
> Is it possible to add a Disk Space check before doing an upgrade?

Um, I thought we do that in the update.sh of every Core Update that involves a kernel update?

> I’ve been bit twice by running out of disk space mid-upgrade.  I was remotely upgrading a family member's system from CU 163 to CU 167 and got stuck ½ way.

When multiple Core Updates are available, Pakfire will currently download them all before applying
them sequentially. On systems with very tight disk space, this can indeed cause trouble, since the
more Core Updates they lag behind, the greater is the amount of disk space necessary for upgrading.

I guess it makes sense to raise this issue and the general question whether we should ship initial
ramdisks or generate them on the target systems (the former has quite some impact on Core Update
sizes) in the August telephone conference.

Any thoughts?

Thanks, and best regards,
Peter Müller

> 
> Here is my recent oops:
> 
> ```
> Message from syslogd(a)ipfire4 at Fri May 13 14:59:33 2022 ...
> ipfire4 ipfire: core-update-164: ERROR cannot update because not enough free space on root.
> May 13 14:59:33 ipfire4 pakfire: PAKFIRE ERROR: Returncode: 2. Sorry. Please search our forum to find a solution for this problem.
> May 13 14:59:55 ipfire4 sshd[31097]: Received signal 15; terminating.
> ```
> 
> Jon
> 
> 
> 
> 
> 
>> On Jul 7, 2022, at 8:19 AM, Michael Tremer <michael.tremer(a)ipfire.org <mailto:michael.tremer(a)ipfire.org>> wrote:
>>
>> Hello,
>>
>> Indeed we don’t need to ship them, we can generate them instead.
>>
>> But that has of course some downsides, too:
>>
>> * It is slow
>> * It is not entirely error-proof (out of disk space, out of memory, system being rebooted too early)
>>
>> I do not really have much of a preference. The only thing I want to say is that ARM needs to get their shit together and being able to load a regular image instead of asking for extra commands here - or build that into dracut.
>>
>> -Michael
>>
>>> On 7 Jul 2022, at 07:48, Peter Müller <peter.mueller(a)ipfire.org <mailto:peter.mueller(a)ipfire.org>> wrote:
>>>
>>> Hello *,
>>>
>>> to my understanding, we do not need to ship "linux-initrd" if we can easily
>>> rebuild those on the systems anyway. I would prefer the latter, since that
>>> keeps the update smaller.
>>>
>>> This was also raised somewhere in the community a while ago, but I am unable
>>> to find the correspondent thread at the moment.
>>>
>>> How do we proceed here?
>>>
>>> Thanks, and best regards,
>>> Peter Müller
>>>
>>>
>>>> https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186 <https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186>
>>>>
>>>> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
>>>> ---
>>>> config/rootfiles/core/169/update.sh | 13 +++++++++++++
>>>> 1 file changed, 13 insertions(+)
>>>>
>>>> diff --git a/config/rootfiles/core/169/update.sh b/config/rootfiles/core/169/update.sh
>>>> index 3902e2d45..50f0bd8a4 100644
>>>> --- a/config/rootfiles/core/169/update.sh
>>>> +++ b/config/rootfiles/core/169/update.sh
>>>> @@ -150,6 +150,19 @@ ldconfig
>>>> # Apply sysctl changes
>>>> /etc/init.d/sysctl start
>>>>
>>>> +# Regenerate all initrds
>>>> +dracut --regenerate-all --force
>>>> +case "$(uname -m)" in
>>>> +	armv*)
>>>> +		mkimage -A arm -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>>>> +		rm /boot/initramfs-${KVER}-ipfire.img
>>>> +		;;
>>>> +	aarch64)
>>>> +		mkimage -A arm64 -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>>>> +		# dont remove initramfs because grub need this to boot.
>>>> +		;;
>>>> +esac
>>>> +
>>>> # Start services
>>>> telinit u
>>>> /etc/init.d/firewall restart
>>
> 
> 

Re: [PATCH] Core Update 169: Regenerate initrds and save space on ARM

[Michael Tremer]

[-- Attachment #1: Type: text/plain, Size: 4488 bytes --]

Hello,

> On 10 Jul 2022, at 12:13, Peter Müller <peter.mueller(a)ipfire.org> wrote:
> 
> Hello Jon,
> 
> thanks for your reply.
> 
>> Peter / Michael,
>> 
>> 
>>> * It is not entirely error-proof (out of disk space, out of memory, system being rebooted too early)
>> 
>> Is it possible to add a Disk Space check before doing an upgrade?
> 
> Um, I thought we do that in the update.sh of every Core Update that involves a kernel update?
> 
>> I’ve been bit twice by running out of disk space mid-upgrade. I was remotely upgrading a family member's system from CU 163 to CU 167 and got stuck ½ way.
> 
> When multiple Core Updates are available, Pakfire will currently download them all before applying
> them sequentially. On systems with very tight disk space, this can indeed cause trouble, since the
> more Core Updates they lag behind, the greater is the amount of disk space necessary for upgrading.
> 
> I guess it makes sense to raise this issue and the general question whether we should ship initial
> ramdisks or generate them on the target systems (the former has quite some impact on Core Update
> sizes) in the August telephone conference.
> 
> Any thoughts?

I can live with both: Shipping or building locally.

But I would want to only do one. Never mix and match. Whatever we do, we will go with it.

Since we are tight on space, why don’t we generate them?

> 
> Thanks, and best regards,
> Peter Müller
> 
>> 
>> Here is my recent oops:
>> 
>> ```
>> Message from syslogd(a)ipfire4 at Fri May 13 14:59:33 2022 ...
>> ipfire4 ipfire: core-update-164: ERROR cannot update because not enough free space on root.
>> May 13 14:59:33 ipfire4 pakfire: PAKFIRE ERROR: Returncode: 2. Sorry. Please search our forum to find a solution for this problem.
>> May 13 14:59:55 ipfire4 sshd[31097]: Received signal 15; terminating.
>> ```
>> 
>> Jon
>> 
>> 
>> 
>> 
>> 
>>> On Jul 7, 2022, at 8:19 AM, Michael Tremer <michael.tremer(a)ipfire.org<mailto:michael.tremer(a)ipfire.org>> wrote:
>>> 
>>> Hello,
>>> 
>>> Indeed we don’t need to ship them, we can generate them instead.
>>> 
>>> But that has of course some downsides, too:
>>> 
>>> * It is slow
>>> * It is not entirely error-proof (out of disk space, out of memory, system being rebooted too early)
>>> 
>>> I do not really have much of a preference. The only thing I want to say is that ARM needs to get their shit together and being able to load a regular image instead of asking for extra commands here - or build that into dracut.
>>> 
>>> -Michael
>>> 
>>>> On 7 Jul 2022, at 07:48, Peter Müller <peter.mueller(a)ipfire.org<mailto:peter.mueller(a)ipfire.org>> wrote:
>>>> 
>>>> Hello *,
>>>> 
>>>> to my understanding, we do not need to ship "linux-initrd" if we can easily
>>>> rebuild those on the systems anyway. I would prefer the latter, since that
>>>> keeps the update smaller.
>>>> 
>>>> This was also raised somewhere in the community a while ago, but I am unable
>>>> to find the correspondent thread at the moment.
>>>> 
>>>> How do we proceed here?
>>>> 
>>>> Thanks, and best regards,
>>>> Peter Müller
>>>> 
>>>> 
>>>>> https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186<https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186>
>>>>> 
>>>>> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
>>>>> ---
>>>>> config/rootfiles/core/169/update.sh | 13 +++++++++++++
>>>>> 1 file changed, 13 insertions(+)
>>>>> 
>>>>> diff --git a/config/rootfiles/core/169/update.sh b/config/rootfiles/core/169/update.sh
>>>>> index 3902e2d45..50f0bd8a4 100644
>>>>> --- a/config/rootfiles/core/169/update.sh
>>>>> +++ b/config/rootfiles/core/169/update.sh
>>>>> @@ -150,6 +150,19 @@ ldconfig
>>>>> # Apply sysctl changes
>>>>> /etc/init.d/sysctl start
>>>>> 
>>>>> +# Regenerate all initrds
>>>>> +dracut --regenerate-all --force
>>>>> +case "$(uname -m)" in
>>>>> +	armv*)
>>>>> +		mkimage -A arm -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>>>>> +		rm /boot/initramfs-${KVER}-ipfire.img
>>>>> +		;;
>>>>> +	aarch64)
>>>>> +		mkimage -A arm64 -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>>>>> +		# dont remove initramfs because grub need this to boot.
>>>>> +		;;
>>>>> +esac
>>>>> +
>>>>> # Start services
>>>>> telinit u
>>>>> /etc/init.d/firewall restart

Re: [PATCH] Core Update 169: Regenerate initrds and save space on ARM

[Adolf Belka]

[-- Attachment #1: Type: text/plain, Size: 4851 bytes --]

Hi All,

On 12/07/2022 12:35, Michael Tremer wrote:
> Hello,
>
>> On 10 Jul 2022, at 12:13, Peter Müller <peter.mueller(a)ipfire.org> wrote:
>>
>> Hello Jon,
>>
>> thanks for your reply.
>>
>>> Peter / Michael,
>>>
>>>
>>>> * It is not entirely error-proof (out of disk space, out of memory, system being rebooted too early)
>>> Is it possible to add a Disk Space check before doing an upgrade?
>> Um, I thought we do that in the update.sh of every Core Update that involves a kernel update?
>>
>>> I’ve been bit twice by running out of disk space mid-upgrade. I was remotely upgrading a family member's system from CU 163 to CU 167 and got stuck ½ way.
>> When multiple Core Updates are available, Pakfire will currently download them all before applying
>> them sequentially. On systems with very tight disk space, this can indeed cause trouble, since the
>> more Core Updates they lag behind, the greater is the amount of disk space necessary for upgrading.
>>
>> I guess it makes sense to raise this issue and the general question whether we should ship initial
>> ramdisks or generate them on the target systems (the former has quite some impact on Core Update
>> sizes) in the August telephone conference.
>>
>> Any thoughts?
> I can live with both: Shipping or building locally.
>
> But I would want to only do one. Never mix and match. Whatever we do, we will go with it.
>
> Since we are tight on space, why don’t we generate them?

That seems a good approach to me. As you say, space is always being talked about. Presumably generating them will take a bit longer for the update but I doubt that it will be a very big impact.

So I support to generate them.

Regards,

Adolf

>> Thanks, and best regards,
>> Peter Müller
>>
>>> Here is my recent oops:
>>>
>>> ```
>>> Message from syslogd(a)ipfire4 at Fri May 13 14:59:33 2022 ...
>>> ipfire4 ipfire: core-update-164: ERROR cannot update because not enough free space on root.
>>> May 13 14:59:33 ipfire4 pakfire: PAKFIRE ERROR: Returncode: 2. Sorry. Please search our forum to find a solution for this problem.
>>> May 13 14:59:55 ipfire4 sshd[31097]: Received signal 15; terminating.
>>> ```
>>>
>>> Jon
>>>
>>>
>>>
>>>
>>>
>>>> On Jul 7, 2022, at 8:19 AM, Michael Tremer <michael.tremer(a)ipfire.org<mailto:michael.tremer(a)ipfire.org>> wrote:
>>>>
>>>> Hello,
>>>>
>>>> Indeed we don’t need to ship them, we can generate them instead.
>>>>
>>>> But that has of course some downsides, too:
>>>>
>>>> * It is slow
>>>> * It is not entirely error-proof (out of disk space, out of memory, system being rebooted too early)
>>>>
>>>> I do not really have much of a preference. The only thing I want to say is that ARM needs to get their shit together and being able to load a regular image instead of asking for extra commands here - or build that into dracut.
>>>>
>>>> -Michael
>>>>
>>>>> On 7 Jul 2022, at 07:48, Peter Müller <peter.mueller(a)ipfire.org<mailto:peter.mueller(a)ipfire.org>> wrote:
>>>>>
>>>>> Hello *,
>>>>>
>>>>> to my understanding, we do not need to ship "linux-initrd" if we can easily
>>>>> rebuild those on the systems anyway. I would prefer the latter, since that
>>>>> keeps the update smaller.
>>>>>
>>>>> This was also raised somewhere in the community a while ago, but I am unable
>>>>> to find the correspondent thread at the moment.
>>>>>
>>>>> How do we proceed here?
>>>>>
>>>>> Thanks, and best regards,
>>>>> Peter Müller
>>>>>
>>>>>
>>>>>> https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186<https://community.ipfire.org/t/again-with-the-file-system-full-core-169/8186>
>>>>>>
>>>>>> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
>>>>>> ---
>>>>>> config/rootfiles/core/169/update.sh | 13 +++++++++++++
>>>>>> 1 file changed, 13 insertions(+)
>>>>>>
>>>>>> diff --git a/config/rootfiles/core/169/update.sh b/config/rootfiles/core/169/update.sh
>>>>>> index 3902e2d45..50f0bd8a4 100644
>>>>>> --- a/config/rootfiles/core/169/update.sh
>>>>>> +++ b/config/rootfiles/core/169/update.sh
>>>>>> @@ -150,6 +150,19 @@ ldconfig
>>>>>> # Apply sysctl changes
>>>>>> /etc/init.d/sysctl start
>>>>>>
>>>>>> +# Regenerate all initrds
>>>>>> +dracut --regenerate-all --force
>>>>>> +case "$(uname -m)" in
>>>>>> +	armv*)
>>>>>> +		mkimage -A arm -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>>>>>> +		rm /boot/initramfs-${KVER}-ipfire.img
>>>>>> +		;;
>>>>>> +	aarch64)
>>>>>> +		mkimage -A arm64 -T ramdisk -C lzma -d /boot/initramfs-${KVER}-ipfire.img /boot/uInit-${KVER}-ipfire
>>>>>> +		# dont remove initramfs because grub need this to boot.
>>>>>> +		;;
>>>>>> +esac
>>>>>> +
>>>>>> # Start services
>>>>>> telinit u
>>>>>> /etc/init.d/firewall restart