Hello, > On 21 Mar 2022, at 19:15, Peter Müller wrote: > > Hello Michael, > > thanks for your reply. > >> Hello, >> >>> On 21 Mar 2022, at 16:03, Peter Müller wrote: >>> >>> Hello Michael, >>> >>> thanks for your reply. >>> >>>> Hello, >>>> >>>> This is interesting. >>> >>> That's a mild way of putting it, I think. :-) >>> >>>> >>>>> On 21 Mar 2022, at 15:35, Peter Müller wrote: >>>>> >>>>> On an IPFire installation that has been around since Core Update 110 >>>>> (released April 28, 2017), these files have been identified as being >>>>> orphaned, comparing to a fresh installation of Core Update 164. >>>>> >>>>> To avoid such a list of files agglomerating, persons responsible for a >>>>> Core Update should check whether an updated package contains deleted >>>>> files in its rootfile. If so, they should be deleted on existing systems >>>>> via update.sh as well. >>>>> >>>>> Signed-off-by: Peter Müller >>>>> --- >>>>> config/rootfiles/core/166/update.sh | 260 +++++++++++++++++++++++++++- >>>>> 1 file changed, 258 insertions(+), 2 deletions(-) >>>>> >>>>> diff --git a/config/rootfiles/core/166/update.sh b/config/rootfiles/core/166/update.sh >>>>> index 1370555b0..b556986a5 100644 >>>>> --- a/config/rootfiles/core/166/update.sh >>>>> +++ b/config/rootfiles/core/166/update.sh >>>>> @@ -32,13 +32,269 @@ for (( i=1; i<=$core; i++ )); do >>>>> done >>>>> >>>>> # Remove files >>>>> -rm -vf \ >>>>> +rm -rvf \ >>>>> + /bin/setserial \ >>>>> /etc/dracut.conf \ >>>>> + /etc/fonts/conf.d/30-urw-aliases.conf \ >>>>> + /etc/grub.d/README \ >>>>> + /etc/rc.d/init.d/networking/red.up/99-geoip-database \ >>>>> + /etc/udev/rules.d/99-fuse.rules \ >>>>> + /lib/firmware/amd-ucode/microcode_amd.bin.asc \ >>>>> + /lib/firmware/amd-ucode/microcode_amd_fam15h.bin.asc \ >>>>> + /lib/firmware/amd-ucode/microcode_amd_fam16h.bin.asc \ >>>>> + /lib/firmware/amd-ucode/microcode_amd_fam17h.bin.asc \ >>>>> + /lib/firmware/ath10k/QCA4019/hw1.0/notice_ath10k_firmware-5.txt \ >>>>> + /lib/firmware/ath10k/QCA6174/hw2.1/notice_ath10k_firmware-5.txt \ >>>>> + /lib/firmware/ath10k/QCA6174/hw3.0/notice_ath10k_firmware-4.txt \ >>>>> + /lib/firmware/ath10k/QCA6174/hw3.0/notice_ath10k_firmware-6.txt \ >>>>> + /lib/firmware/ath10k/QCA9377/hw1.0/notice_ath10k_firmware-5.txt \ >>>>> + /lib/firmware/ath10k/QCA9377/hw1.0/notice_ath10k_firmware-6.txt \ >>>>> + /lib/firmware/ath10k/QCA9887/hw1.0/notice_ath10k_firmware-5.txt \ >>>>> + /lib/firmware/ath10k/QCA9888/hw2.0/notice_ath10k_firmware-5.txt \ >>>>> + /lib/firmware/ath10k/QCA988X/hw2.0/notice_ath10k_firmware-4.txt \ >>>>> + /lib/firmware/ath10k/QCA988X/hw2.0/notice_ath10k_firmware-5.txt \ >>>>> + /lib/firmware/ath10k/QCA9984/hw1.0/notice_ath10k_firmware-5.txt \ >>>>> + /lib/firmware/ath10k/QCA99X0/hw2.0/notice_ath10k_firmware-5.txt \ >>>>> + /lib/firmware/atusb/ChangeLog \ >>>>> + /lib/firmware/check_whence.py \ >>>>> + /lib/firmware/cis/src \ >>>>> + /lib/firmware/copy-firmware.sh \ >>>>> + /lib/firmware/cxgb4/t4fw-1.20.8.0.bin \ >>>>> + /lib/firmware/cxgb4/t4fw-1.24.3.0.bin \ >>>>> + /lib/firmware/cxgb4/t5fw-1.20.8.0.bin \ >>>>> + /lib/firmware/cxgb4/t5fw-1.24.3.0.bin \ >>>>> + /lib/firmware/cxgb4/t6fw-1.20.8.0.bin \ >>>>> + /lib/firmware/cxgb4/t6fw-1.24.3.0.bin \ >>>>> + /lib/firmware/GPL-2 \ >>>>> + /lib/firmware/GPL-3 \ >>>>> + /lib/firmware/isci/README \ >>>>> + /lib/firmware/LICENCE.* \ >>>>> + /lib/firmware/Makefile \ >>>>> + /lib/firmware/qca/NOTICE.txt \ >>>>> + /lib/firmware/qcom/NOTICE.txt \ >>>>> + /lib/firmware/README \ >>>>> + /lib/firmware/WHENCE \ >>>>> + /lib/kbd/keymaps/i386/qwerty/fi-latin1.map.gz \ >>>>> + /lib/kbd/keymaps/i386/qwerty/fi-latin9.map.gz \ >>>>> + /lib/ld-2.29.so \ >>>>> + /lib/ld-2.31.so \ >>>>> + /lib/ld-2.32.so \ >>>> >>>> These should have been gone before. Ideally by the filesystem cleanup script. >>> >>> To be honest, I never had a look at this script, and therefore do not have an idea >>> what it does and what it does not. I will investigate and get back to you, if necessary. >>> >>>>> + /lib/libcap.so \ >>>>> + /lib/libhistory.so.5 \ >>>>> + /lib/libhistory.so.5.2 \ >>>>> + /lib/libip4tc.so.0 \ >>>>> + /lib/libip4tc.so.0.1.0 \ >>>>> + /lib/libip6tc.so.0 \ >>>>> + /lib/libip6tc.so.0.1.0 \ >>>>> + /lib/libiptc.so \ >>>>> + /lib/libiptc.so.0 \ >>>>> + /lib/libiptc.so.0.0.0 \ >>>>> + /lib/libnss_nis-2.31.so \ >>>>> + /lib/libnss_nisplus-2.31.so \ >>>>> + /lib/libnss_nisplus.so.2 \ >>>>> + /lib/libnss_nis.so.2 \ >>>>> + /lib/libproc-3.2.8.so \ >>>>> + /lib/libreadline.so.5 \ >>>>> + /lib/libreadline.so.5.2 \ >>>>> + /lib/libsysfs.so \ >>>>> + /lib/libsysfs.so.1 \ >>>>> + /lib/libsysfs.so.1.0.3 \ >>>>> + /lib/udev/bluetooth_serial \ >>>>> + /lib/udev/rules.d/24-bluetooth.rules \ >>>>> + /lib/xtables/libxt_IMQ.so \ >>>>> /opt/pakfire/pakfire-2007.key \ >>>>> + /sbin/mount.fuse \ >>>>> + /sbin/raw \ >>>>> + /sbin/xfs_scrub \ >>>>> + /sbin/xfs_scrub_all \ >>>>> + /srv/web/ipfire/cgi-bin/bluetooth.cgi \ >>>>> + /usr/bin/ez-ipupdate \ >>>> >>>> LOL >>> >>> ? >>> >>>> >>>>> + /usr/bin/fusermount \ >>>>> + /usr/bin/gawk-5.1.0 \ >>>>> + /usr/bin/gcov-dump \ >>>>> + /usr/bin/getunimap \ >>>>> /usr/bin/mkinitrd \ >>>>> + /usr/bin/mtools \ >>>>> + /usr/bin/pango-querymodules \ >>>>> + /usr/bin/perl5.30.0 \ >>>>> + /usr/bin/setlogcons \ >>>>> + /usr/bin/setvesablank \ >>>>> + /usr/bin/ulockmgr_server \ >>>>> + /usr/include/python2.7 \ >>>>> + /usr/lib/cairo \ >>>>> /usr/lib/dracut \ >>>>> + /usr/lib/findutils/bigram \ >>>>> + /usr/lib/findutils/code \ >>>>> + /usr/lib/gawk/testext.so \ >>>>> + /usr/lib/itcl4.2.1 \ >>>>> + /usr/lib/libasan.so.5 \ >>>>> + /usr/lib/libasan.so.5.0.0 \ >>>>> + /usr/lib/libbfd-2.32.so \ >>>>> + /usr/lib/libbfd-2.34.so \ >>>>> + /usr/lib/libbfd-2.35.1.so \ >>>>> + /usr/lib/libbind9-9.16.22.so \ >>>>> + /usr/lib/libbind9.so.161 \ >>>>> + /usr/lib/libbind9.so.161.0.4 \ >>>>> + /usr/lib/libblkid.so \ >>>>> + /usr/lib/libdns-9.16.22.so \ >>>>> + /usr/lib/libdnssec.so.7 \ >>>>> + /usr/lib/libdnssec.so.7.0.0 \ >>>>> + /usr/lib/libdns.so.* \ >>>> >>>> These should have been caught by the script as well. Any idea why that didn’t happen? >>>> >>>>> + /usr/lib/libevent-2.1.so.6 \ >>>>> + /usr/lib/libevent-2.1.so.6.0.2 \ >>>>> + /usr/lib/libevent_core-2.1.so.6 \ >>>>> + /usr/lib/libevent_core-2.1.so.6.0.2 \ >>>>> + /usr/lib/libevent_extra-2.1.so.6 \ >>>>> + /usr/lib/libevent_extra-2.1.so.6.0.2 \ >>>>> + /usr/lib/libevent_openssl-2.1.so.6 \ >>>>> + /usr/lib/libevent_openssl-2.1.so.6.0.2 \ >>>>> + /usr/lib/libevent_openssl.so \ >>>>> + /usr/lib/libevent_pthreads-2.1.so.6 \ >>>>> + /usr/lib/libevent_pthreads-2.1.so.6.0.2 \ >>>>> + /usr/lib/libevent_pthreads.so \ >>>>> + /usr/lib/libexpat.so \ >>>>> + /usr/lib/libexslt.so \ >>>>> + /usr/lib/libffi.so.6 \ >>>>> + /usr/lib/libffi.so.6.0.4 \ >>>>> + /usr/lib/libffi.so.7 \ >>>>> + /usr/lib/libffi.so.7.1.0 \ >>>>> + /usr/lib/libfuse.so \ >>>>> + /usr/lib/libfuse.so.2 \ >>>>> + /usr/lib/libfuse.so.2.9.7 \ >>>>> + /usr/lib/libgdbm_compat.so \ >>>>> + /usr/lib/libgdbm_compat.so.3 \ >>>>> + /usr/lib/libgdbm_compat.so.3.0.0 \ >>>>> + /usr/lib/libgdbm.so \ >>>>> + /usr/lib/libgdbm.so.3 \ >>>>> + /usr/lib/libgdbm.so.3.0.0 \ >>>>> + /usr/lib/libgd.so \ >>>>> + /usr/lib/libgd.so.2 \ >>>>> + /usr/lib/libgd.so.2.0.0 \ >>>>> + /usr/lib/libgettextlib-0.19.8.1.so \ >>>>> + /usr/lib/libgettextsrc-0.19.8.1.so \ >>>>> + /usr/lib/libhistory.so.6 \ >>>>> + /usr/lib/libhistory.so.6.3 \ >>>>> + /usr/lib/libhogweed.so.5 \ >>>>> + /usr/lib/libhogweed.so.5.0 \ >>>>> + /usr/lib/libidn.so \ >>>>> + /usr/lib/libidn.so.11 \ >>>>> + /usr/lib/libidn.so.11.6.18 \ >>>>> + /usr/lib/libirs-9.16.22.so \ >>>>> + /usr/lib/libisc-9.16.22.so \ >>>>> + /usr/lib/libisccc-9.16.22.so \ >>>>> + /usr/lib/libisccc.so.161 \ >>>>> + /usr/lib/libisccc.so.161.0.1 \ >>>>> + /usr/lib/libisccfg-9.16.22.so \ >>>>> + /usr/lib/libisccfg.so.163 \ >>>>> + /usr/lib/libisccfg.so.163.0.8 \ >>>>> + /usr/lib/libisc.so.1100 \ >>>>> + /usr/lib/libisc.so.1100.3.2 \ >>>>> + /usr/lib/libisc.so.1104 \ >>>>> + /usr/lib/libisc.so.1104.0.0 \ >>>>> + /usr/lib/libisc.so.1105 \ >>>>> + /usr/lib/libisc.so.1105.1.1 \ >>>>> + /usr/lib/libisc.so.1107 \ >>>>> + /usr/lib/libisc.so.1107.0.5 \ >>>> >>>> See above. >>>> >>>>> + /usr/lib/libixml.so \ >>>>> + /usr/lib/libknot.so.10 \ >>>>> + /usr/lib/libknot.so.10.0.0 \ >>>>> + /usr/lib/libknot.so.11 \ >>>>> + /usr/lib/libknot.so.11.0.0 \ >>>>> + /usr/lib/libknot.so.9 \ >>>>> + /usr/lib/libknot.so.9.0.0 \ >>>>> + /usr/lib/liblber-2.3.so.0 \ >>>>> + /usr/lib/liblber-2.3.so.0.2.8 \ >>>>> + /usr/lib/libldap-2.3.so.0 \ >>>>> + /usr/lib/libldap-2.3.so.0.2.8 \ >>>>> + /usr/lib/libldap_r-2.3.so.0 \ >>>>> + /usr/lib/libldap_r-2.3.so.0.2.8 \ >>>>> + /usr/lib/libloc.so.0 \ >>>>> + /usr/lib/libloc.so.0.0.0 \ >>>>> + /usr/lib/liblua-5.3.so \ >>>>> + /usr/lib/liblua.so \ >>>>> + /usr/lib/liblwres.so.161 \ >>>>> + /usr/lib/liblwres.so.161.0.4 \ >>>>> + /usr/lib/libmpfr.so.4 \ >>>>> + /usr/lib/libmpfr.so.4.1.5 \ >>>>> + /usr/lib/libmpx.so.2 \ >>>>> + /usr/lib/libmpx.so.2.0.1 \ >>>>> + /usr/lib/libmpxwrappers.so.2 \ >>>>> + /usr/lib/libmpxwrappers.so.2.0.1 \ >>>>> + /usr/lib/libnettle.so.7 \ >>>>> + /usr/lib/libnettle.so.7.0 \ >>>>> + /usr/lib/libns-9.16.22.so \ >>>>> + /usr/lib/libopcodes-2.32.so \ >>>>> + /usr/lib/libopcodes-2.34.so \ >>>>> + /usr/lib/libopcodes-2.35.1.so \ >>>>> + /usr/lib/libpcre2-posix.so.2 \ >>>>> + /usr/lib/libpcre2-posix.so.2.0.3 \ >>>>> + /usr/lib/libpng12.so \ >>>>> + /usr/lib/libpng12.so.0 \ >>>>> + /usr/lib/libpng12.so.0.57.0 \ >>>>> + /usr/lib/libpng.so.3 \ >>>>> + /usr/lib/libpng.so.3.57.0 \ >>>>> + /usr/lib/libpoppler.so.100 \ >>>>> + /usr/lib/libpoppler.so.100.0.0 \ >>>>> + /usr/lib/libpoppler.so.110 \ >>>>> + /usr/lib/libpoppler.so.110.0.0 \ >>>>> + /usr/lib/libpoppler.so.111 \ >>>>> + /usr/lib/libpoppler.so.111.0.0 \ >>>>> + /usr/lib/libpoppler.so.66 \ >>>>> + /usr/lib/libpoppler.so.66.0.0 \ >>>>> + /usr/lib/libqpdf.so.17 \ >>>>> + /usr/lib/libqpdf.so.17.0.0 \ >>>>> + /usr/lib/libreadline.so.6 \ >>>>> + /usr/lib/libreadline.so.6.3 \ >>>>> + /usr/lib/libsensors.so.4 \ >>>>> + /usr/lib/libsensors.so.4.4.0 \ >>>>> + /usr/lib/libsqlite3.so \ >>>>> + /usr/lib/libthreadutil.so \ >>>>> + /usr/lib/libthreadutil.so.6 \ >>>>> + /usr/lib/libthreadutil.so.6.0.3 \ >>>>> + /usr/lib/libulockmgr.so \ >>>>> + /usr/lib/libulockmgr.so.1 \ >>>>> + /usr/lib/libulockmgr.so.1.0.1 \ >>>>> + /usr/lib/libupnp.so \ >>>>> + /usr/lib/libuuid.so \ >>>>> + /usr/lib/libxml2.so \ >>>>> + /usr/lib/libxslt.so \ >>>>> + /usr/lib/pango \ >>>>> + /usr/lib/perl5/site_perl/5.30.0 \ >>>>> + /usr/lib/perl5/site_perl/5.32.1/Net/IP.pm \ >>>>> + /usr/lib/python3.8/ensurepip/_bundled/pip-19.2.3-py2.py3-none-any.whl \ >>>>> + /usr/lib/python3.8/idlelib/Icons/idle.icns \ >>>>> + /usr/lib/python3.8/lib2to3/Grammar3.8.1.final.0.pickle \ >>>>> + /usr/lib/python3.8/lib2to3/PatternGrammar3.8.1.final.0.pickle \ >>>> >>>> Why can we not delete /usr/lib/python3.8 as a whole? This should not be needed any more. >>> >>> Yes, good point. I was running the comparison based on Core Update 164, but with >>> Python being updated to 3.10.x in Core Update 165, this folder won't be necessary >>> anymore completely. >>> >>>> >>>>> + /usr/lib/sqlite3.34.0 \ >>>>> + /usr/lib/squid/basic_nis_auth \ >>>>> + /usr/lib/squid/ext_time_quota_acl \ >>>>> + /usr/lib/tcl8/8.4/platform-1.0.14.tm \ >>>>> + /usr/lib/tcl8/8.4/platform-1.0.15.tm \ >>>>> + /usr/lib/tcl8/8.5/msgcat-1.6.0.tm \ >>>>> + /usr/lib/tcl8/8.5/tcltest-2.4.0.tm \ >>>>> + /usr/lib/tcl8/8.6/http-2.8.9.tm \ >>>>> + /usr/lib/tcl8/8.6/tdbc/sqlite3-1.0.4.tm \ >>>>> + /usr/lib/tcl8/8.6/tdbc/sqlite3-1.1.2.tm \ >>>> >>>> Why do we even ship tcl? Is anything reliant on this? >>> >>> I don't know. >>> >>>>> + /usr/lib/tdbc1.1.2 \ >>>>> + /usr/lib/tdbcmysql1.1.2 \ >>>>> + /usr/lib/tdbcodbc1.1.2 \ >>>>> + /usr/lib/tdbcpostgres1.1.2 \ >>>>> + /usr/lib/thread2.8.6 \ >>>>> + /usr/libexec/xtables-addons \ >>>>> /usr/local/bin/ovpn-ccd-convert \ >>>>> - /usr/local/bin/rebuild-initrd >>>>> + /usr/local/bin/rebuild-initrd \ >>>>> + /usr/local/bin/xt_geoip_build \ >>>>> + /usr/local/bin/xt_geoip_update \ >>>>> + /usr/sbin/batctl \ >>>>> + /usr/sbin/fbset \ >>>>> + /usr/sbin/update-usbids.sh \ >>>>> + /usr/sbin/uuidd \ >>>>> + /usr/share/doc/fireinfo \ >>>>> + /usr/share/GeoIP \ >>>>> + /usr/share/zoneinfo/posix/US/Pacific-New \ >>>>> + /usr/share/zoneinfo/right/US/Pacific-New \ >>>>> + /usr/share/zoneinfo/US/Pacific-New \ >>>>> + /var/lib/GeoIP >>>> >>>> What method did you use to identify all these files? >>> >>> On the IPFire installation in question, I ran >>> >>>> find bin/ etc/ lib/ opt/ run/ sbin/ srv/ usr/ var/ | sort > ~/ist >>> >>> and scp'ed that file onto my workstation. Then, I downloaded the ISO for Core Update 164 >>> (because I wanted to have something stable, which is why I did not choose C165 for this), >>> installed it in a VM, rebooted it, mounted the root partition and executed the same find >>> command with a different file name. >> >> Okay, so this is based on a random system. Not bad, but would be better if we could diff two filelists from two core updates, wouldn’t it? > > I am not sure if I understood you here: The filelist above contains all leftovers that have > agglomerated since Core Update 110. Comparing two filelists would only cover a fraction of > it, since this comparison cannot skip any update. > > However: Do you see a feasible way to obtain such lists, and perhaps scipt the generation of > such a list of orphaned files? Yes, we could use “git archive” to create a tarball from any branch, so in this case a core update from the past. We could then only extract (or directly send to stdout) all files in config/rootfiles/command, sort the output and compare it to what is currently in config/rootfiles/common. Stretch goal is doing this for all architectures :) Here is the command for the main file list: git archive origin/core160 | tar --extract --to-stdout config/rootfiles/common | grep -v "^#" | sort -u This could be integrated into make.sh :) -Michael > > Thanks, and best regards, > Peter Müller > >> >>> >>> A >>> >>>> diff -Naur soll ist | less >>> >>> (sorry for the German) outputs a long list, which I vetted manually since some add-ons >>> were installed on the productive system, and I did not want to pipe the output into the >>> rm command blindly. >>> >>> Thanks, and best regards, >>> Peter Müller >>> >>>> >>>> -Michael >>>> >>>>> >>>>> # Delete old 2007 Pakfire key from GPG keyring >>>>> export GNUPGHOME="/opt/pakfire/etc/.gnupg" >>>>> -- >>>>> 2.34.1