From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Tremer To: development@lists.ipfire.org Subject: Re: 802.11ac - specific config requirements for hostapd Date: Fri, 28 Dec 2018 22:54:39 +0000 Message-ID: <993FC711-423C-4972-9D4E-996F0FBC9584@ipfire.org> In-Reply-To: <8FF0C2E7-B7FE-4601-BE99-897092E75FB5@gmx.com> MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="===============6398075334113203581==" List-Id: --===============6398075334113203581== Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable > On 28 Dec 2018, at 22:49, Horace Michael wrote: >=20 >=20 >=20 >=20 > Hi > wrote: >> Hi, >>=20 >>> On 28 Dec 2018, at 22:41, Horace Michael >> wrote: >>>=20 >>> Hello, >>>=20 >>> Please consider to add to WUI (cgi-bin/wlanap.cgi) a field where >> specific 802.11ac settings can be added. >>> Ex: >>> vht_oper_chwidth=3D1 >>> vht_oper_centr_freq_seg0_idx=3D42 >>>=20 >>=20 >> It is absolutely impossible to hardcode a specific channel. >>=20 >=20 > vht_oper_centr_freq_seg0_idx was a bad example - it is computed based on th= e channel... >=20 > Other than that the list of settings required by 802.11ac is quite long and= currently there is no place to add them in WUI. *What* other settings? 802.11ac runs fine as it is. You need to be clearer on= what you want to achieve here. -Michael >>> Others specific settings might be needed - as listed in the hostapd >> configuration file https://w1.fi/cgit/hostap/plain/hostapd/hostapd.conf >>=20 >>>=20 >>> Currently these settings added to /etc/hostapd.conf don't survire >> when WUI is used - settings need to be added back afer WUI is used and >> hostapd restarted.=20 >>>=20 >>> Thank you for considering this improvement, >>> Horace=20 >>=20 >> -Michael >=20 > -- > Horace Michael (aka H&M) > Please excuse my typos and brevity. Sent from a Smartphone. --===============6398075334113203581==--