Hello, > On 14 Apr 2021, at 21:02, Adolf Belka wrote: > > Hi Michael, > > On 14/04/2021 19:48, Michael Tremer wrote: >> Hello, >> There was another sobump in this package and netsnmpd was linking against it. >> I incremented the release number of that package, too. > Ah, so if a shared object library is changed in the rootfiles by an update I should run the find-dependencies step to see if there are any other addon programs linked to it, in which case I need to increment the PAK_VER number of that package as well and submit as a patch. Not always, but sometimes :) Every binary has a lost of libraries that it needs. Those are what we call “dependencies”. You can see them by using “readelf -d” (the NEEDED lines): root(a)michael:/build/ipfire-2.x# readelf -d /bin/bash Dynamic section at offset 0x113cf0 contains 28 entries: Tag Type Name/Value 0x0000000000000001 (NEEDED) Shared library: [libtinfo.so.6] 0x0000000000000001 (NEEDED) Shared library: [libdl.so.2] 0x0000000000000001 (NEEDED) Shared library: [libc.so.6] 0x000000000000000c (INIT) 0x2d000 0x000000000000000d (FINI) 0xda784 0x0000000000000019 (INIT_ARRAY) 0x1123f0 But instead of listing "libtinfo.so.6.1”, only the first number is included. That is so that you can update a library if bugs have been fixed and give it a new version (libtinfo.so.6.2, libtinfo.so.6.3, libtinfo.so.6.4, …) and avoid recompiling all programs. Most of the time, nothing important changes, only what a function does might be slightly changed, which is not really relevant to “bash” in this case. The runtime linker is now looking for “libtinfo.so.6” which is a symlink to libtinfo.so.6.1. If libtinfo.so.6 disappears because an update to libtinfo.so.7 would be installed, bash will no longer function because the runtime linker does not find all needed libraries. That is why we need to find all files that are linked against a library if we move from .6 to .7, but not when we move from .6.1 to .6.2. I hope this makes sense :) > Just to confirm that is only if another addon is flagged. What if a common program is flagged, how do I deal with that because they don't have a PAK_VER to increment? Then we would need to ship those programs by linking the root files into the core update. -Michael > > Regards, > Adolf > >> Best, >> -Michael >>> On 14 Apr 2021, at 12:57, Adolf Belka wrote: >>> >>> - Update from 3-4-0 to 3-6-0 >>> - Update of rootfilers in each architecture >>> Only the library version changed in each rootfile >>> - Installed updated lm_sensors. Confirmed updated version was installed. >>> sensors-detect ran successfully but could not confirm successful sensor >>> detection as installation was run on vm testbed and this has no sesnors >>> Testing on real hardware to confirm that sensors are detected and >>> sensor-* directories correctly created in IPFire. >>> - Changelog >>> 3.6.0 (2019-10-18) >>> configs: Added a number of new configuration files >>> fancontrol: AVERAGE env variable can be used to set the number of previ> >>> Makefile: The MACHINE variable has been renamed to ARCH >>> sensord: Add an option -1/--oneline to print chip and adapter on the sa> >>> sensors: Fixed a stray comma bug in the JSON output >>> Fixed Fahrenheit conversion with raw and JSON output >>> Scale voltage and current values in the default output format >>> sensors-detect: Add detection of AMD Family 17h, models 30h, 70h >>> Add detection of some AMD Family 15h models >>> Add detection of AMD Family 16h model 30h power sensors >>> Add detection of Hygon Family 18h thermal sensors >>> Add detection of Nuvoton NCT6797D >>> Add detection of Nuvoton NCT6798D >>> Add detection of Nuvoton NCT6112D/NCT6114D/NCT6116D >>> Fix printing CPU info on non-x86 arches >>> Fix printing lm_sensors version >>> Mark Fintek F75387SG/RG as supported by the f75375s dri> >>> 3.5.0 (2018-11-23) >>> Fixed disappearance of certain hwmon chips with 4.19+ kernels >>> Add the find-driver script for debugging >>> Various documentation and man page improvements >>> Fix various issues found by Coverity Scan >>> Fix compilation with the musl C library >>> Development version string now contains "+git" instead of "+SVN" >>> Updated links in documentation to reflect the new home of lm_sensors >>> sensors.1: Add reference to sensors-detect >>> Document -j option (json output) >>> sensors: Add support for json output >>> Add support for power min, lcrit, min_alarm, lcrit_alarm >>> sensors-detect: Fix systemd paths >>> Add detection of Fintek F81768 >>> Only probe I/O ports on x86 >>> Add detection of Nuvoton NCT6793D >>> Add detection of Microchip MCP9808 >>> Mark F71868A as supported by the f71882fg driver >>> Mark F81768D as supported by the f71882fg driver >>> Mark F81866D as supported by the f71882fg driver >>> Add detection of various ITE chips >>> Add detection of Nuvoton NCT6795D >>> Add detection of DDR4 SPD >>> Add detection of ITE IT8987D >>> Add detection of AMD Family 17h temperature sensors >>> Add detection of AMD KERNCZ SMBus controller >>> Add detection of various Intel SMBus controllers >>> Add detection of Giantec GT30TS00 >>> Add detection of ONS CAT34TS02C and CAT34TS04 >>> Add detection of AMD Family 15h Model 60+ temperature s> >>> Add detection of Nuvoton NCT6796D >>> Add detection of AMD Family 15h Model 70+ temperature s> >>> configs: Add sample configuration files. >>> sensors.conf.default: Add hardwired inputs of NCT6795D >>> Add hardwired inputs of F71868A >>> Add hardwired NCT6796D inputs >>> vt1211_pwm: replaced deprecated sub shell syntax >>> run with bash instead of sh >>> pwmconfig: replaced deprecated sub shell syntax >>> fancontrol: replaced deprecated sub shell syntax >>> save original pwm values >>> fancontrol.8: replaced deprecated sub shell syntax >>> libsensors: Add support for SENSORS_BUS_TYPE_SCSI >>> Add support for power min, lcrit, min_alarm, lcrit_alarm >>> >>> Signed-off-by: Adolf Belka >>> --- >>> config/rootfiles/common/aarch64/lm_sensors | 4 ++-- >>> config/rootfiles/common/armv5tel/lm_sensors | 4 ++-- >>> config/rootfiles/common/i586/lm_sensors | 4 ++-- >>> config/rootfiles/common/x86_64/lm_sensors | 4 ++-- >>> lfs/lm_sensors | 10 +++++----- >>> 5 files changed, 13 insertions(+), 13 deletions(-) >>> >>> diff --git a/config/rootfiles/common/aarch64/lm_sensors b/config/rootfiles/common/aarch64/lm_sensors >>> index 1346047b9..f10ad80bd 100644 >>> --- a/config/rootfiles/common/aarch64/lm_sensors >>> +++ b/config/rootfiles/common/aarch64/lm_sensors >>> @@ -7,8 +7,8 @@ usr/bin/sensors-conf-convert >>> #usr/include/sensors/sensors.h >>> #usr/lib/libsensors.a >>> #usr/lib/libsensors.so >>> -usr/lib/libsensors.so.4 >>> -usr/lib/libsensors.so.4.4.0 >>> +usr/lib/libsensors.so.5 >>> +usr/lib/libsensors.so.5.0.0 >>> #usr/man/man1/sensors.1 >>> #usr/man/man3/libsensors.3 >>> #usr/man/man5/sensors.conf.5 >>> diff --git a/config/rootfiles/common/armv5tel/lm_sensors b/config/rootfiles/common/armv5tel/lm_sensors >>> index 998b02e9f..52514f1ab 100644 >>> --- a/config/rootfiles/common/armv5tel/lm_sensors >>> +++ b/config/rootfiles/common/armv5tel/lm_sensors >>> @@ -7,8 +7,8 @@ usr/bin/sensors-conf-convert >>> #usr/include/sensors/sensors.h >>> #usr/lib/libsensors.a >>> usr/lib/libsensors.so >>> -usr/lib/libsensors.so.4 >>> -usr/lib/libsensors.so.4.4.0 >>> +usr/lib/libsensors.so.5 >>> +usr/lib/libsensors.so.5.0.0 >>> #usr/man/man1/sensors.1 >>> #usr/man/man3/libsensors.3 >>> #usr/man/man5/sensors.conf.5 >>> diff --git a/config/rootfiles/common/i586/lm_sensors b/config/rootfiles/common/i586/lm_sensors >>> index 9936e0466..0f7461d4c 100644 >>> --- a/config/rootfiles/common/i586/lm_sensors >>> +++ b/config/rootfiles/common/i586/lm_sensors >>> @@ -7,8 +7,8 @@ usr/bin/sensors-conf-convert >>> #usr/include/sensors/sensors.h >>> #usr/lib/libsensors.a >>> usr/lib/libsensors.so >>> -usr/lib/libsensors.so.4 >>> -usr/lib/libsensors.so.4.4.0 >>> +usr/lib/libsensors.so.5 >>> +usr/lib/libsensors.so.5.0.0 >>> #usr/man/man1/sensors.1 >>> #usr/man/man3/libsensors.3 >>> #usr/man/man5/sensors.conf.5 >>> diff --git a/config/rootfiles/common/x86_64/lm_sensors b/config/rootfiles/common/x86_64/lm_sensors >>> index 9936e0466..0f7461d4c 100644 >>> --- a/config/rootfiles/common/x86_64/lm_sensors >>> +++ b/config/rootfiles/common/x86_64/lm_sensors >>> @@ -7,8 +7,8 @@ usr/bin/sensors-conf-convert >>> #usr/include/sensors/sensors.h >>> #usr/lib/libsensors.a >>> usr/lib/libsensors.so >>> -usr/lib/libsensors.so.4 >>> -usr/lib/libsensors.so.4.4.0 >>> +usr/lib/libsensors.so.5 >>> +usr/lib/libsensors.so.5.0.0 >>> #usr/man/man1/sensors.1 >>> #usr/man/man3/libsensors.3 >>> #usr/man/man5/sensors.conf.5 >>> diff --git a/lfs/lm_sensors b/lfs/lm_sensors >>> index 8403be6e0..42c55d6d6 100644 >>> --- a/lfs/lm_sensors >>> +++ b/lfs/lm_sensors >>> @@ -24,10 +24,10 @@ >>> >>> include Config >>> >>> -VER = 3.4.0 >>> +VER = 3-6-0 >>> >>> -THISAPP = lm_sensors-$(VER) >>> -DL_FILE = $(THISAPP).tar.bz2 >>> +THISAPP = lm-sensors-$(VER) >>> +DL_FILE = $(THISAPP).tar.gz >>> DL_FROM = $(URL_IPFIRE) >>> DIR_APP = $(DIR_SRC)/$(THISAPP) >>> TARGET = $(DIR_INFO)/$(THISAPP) >>> @@ -40,7 +40,7 @@ objects = $(DL_FILE) >>> >>> $(DL_FILE) = $(DL_FROM)/$(DL_FILE) >>> >>> -$(DL_FILE)_MD5 = c03675ae9d43d60322110c679416901a >>> +$(DL_FILE)_MD5 = f60e47b5eb50bbeed48a9f43bb08dd5e >>> >>> install : $(TARGET) >>> >>> @@ -72,7 +72,7 @@ $(subst %,%_MD5,$(objects)) : >>> >>> $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) >>> @$(PREBUILD) >>> - @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar jxf $(DIR_DL)/$(DL_FILE) >>> + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE) >>> cd $(DIR_APP) && make PREFIX=/usr $(MAKETUNING) >>> cd $(DIR_APP) && make PREFIX=/usr install >>> @rm -rf $(DIR_APP) >>> -- >>> 2.31.1 >>>