Hello Alf,

> On 15 Mar 2022, at 20:39, alf(a)i100.no wrote:
> 
> Den 2022-03-15 19:01, skrev Michael Tremer:
> 
> For the hyperv keyboard driver, my conclusion is that dracut 56 includes this on its own,
> since
> https://github.com/dracutdevs/dracut/blob/35064768ebf14d3ec6bf3f7df52580fb4920ea3d/modules.d/90kernel-modules/module-setup.sh#L57
> 
> shows that all modules from input/serio is included, and the hyperv_keyboard is part of serio
> https://github.com/torvalds/linux/tree/5bfc75d92efd494db37f5c4c173d3639d4772966/drivers/input/serio
> 
> As to the "sdhci_acpi sdhci_pci" drivers, I do not think they are specific to Xen nor HyperV.
> I guess you can do a lsinitrd on the built image, and see if they are present in the image.
> (I currently do not have a build/test environment set up)
> 
> And finally regarding the "dmraid", I looked quite a bit to understand why the if test
> https://github.com/dracutdevs/dracut/blob/0e80ff72e01d28e7e92d3adbf98ec40bdbdc37fe/modules.d/90mdraid/parse-md.sh#L10
> was disabled by the patch for v38.
> But I do not use any raid solution, so I do not have much clues.

Thank you for double-checking. I came to the same conclusion on Hyper-V, and I don’t know at all what the mdraid patch is for.

> Regarding the modules currently included by the config now for v56, will the core updater eventually remove
> dracut modules currently installed on my ipfire system, but which will not be part of the build for dracut v56 ?
> Otherwise, my system will contain a mix of modules from v38 and v56, as I see it, which could cause unexpected issues.

Yes, before we extract the new files, we remove all old modules:

  https://git.ipfire.org/?p=ipfire-2.x.git;a=commitdiff;h=b45c52760bc7820d53d3478cf54e40f43b44f3c6

Best,
-Michael

> 
> Regards
> Alf
> 
> 
>> Hello,
>>> On 15 Mar 2022, at 17:59, Peter Müller <peter.mueller(a)ipfire.org> wrote:
>>> Hello Michael,
>>> thanks for your reply.
>>>> Hello,
>>>>> On 15 Mar 2022, at 17:48, Peter Müller <peter.mueller(a)ipfire.org> wrote:
>>>>> Hello Michael,
>>>>> thank you for taking care of this, and including Alf's suggestions.
>>>>> Regarding this patch, I have one question:
>>>>>> This one was desperately in need of an upgrade, as dracut 038 was
>>>>>> released 8 YEARS ago. Hence, the changelog since is way too long to
>>>>>> include it here; refer to https://git.kernel.org/pub/scm/boot/dracut/dracut.git/tree/NEWS.md
>>>>>> for details.
>>>>>> See also: #12773
>>>>>> Signed-off-by: Peter Müller <peter.mueller(a)ipfire.org>
>>>>>> Signed-off-by: Michael Tremer <michael.tremer(a)ipfire.org>
>>>>>> ---
>>>>>> config/rootfiles/common/dracut                | 532 +++++++++++++++---
>>>>>> lfs/dracut                                    |  12 +-
>>>>>> .../dracut-038-always-enable-mdraid.patch     |  55 --
>>>>>> ...38_add_hyperv-keyboard_and_sdhci-pci.patch |  12 -
>>>>>> 4 files changed, 465 insertions(+), 146 deletions(-)
>>>>>> delete mode 100644 src/patches/dracut-038-always-enable-mdraid.patch
>>>>>> delete mode 100644 src/patches/dracut-038_add_hyperv-keyboard_and_sdhci-pci.patch
>>>>> Here, you deleted these patches without a replacement based on the current dracut
>>>>> version. Is this intentional? Are they no longer needed anymore?
>>>> I simply don’t know. If so, they should have been upstreamed.
>>>> I guess we will have to wait from feedback from the people who are affected by whatever those patches were supposed to fix.
>>> Well, the first patch was introduced in commit 0a325292d78c23239a52eb85ca39db343d7db115
>>> by you back in 2014, while the second one was introduced by Arne in late 2020 (commit
>>> 7e09bcbc45695026592ac4169f9aa18bb8fb811e). For the latter, I vaguely remember some issues
>>> on Hyper-V, but that commit does not refer to a bug ID. :-/
>>> Not being an expert on either dracut nor Hyper-V, I would guess the latter patch is still
>>> needed, unless dracut now handles this virtualisation platform better. Perhaps we can ask
>>> users running IPFire on Hyper-V directly for their feedback, to avoid nasty surprises after
>>> releasing the Core Update... :-)
>> We are, but unfortunately Hyper-V and Xen are so rare, that we never
>> get any feedback before the release.
>>> Thanks, and best regards,
>>> Peter Müller
>>>> In general I believe that if IPFire won’t boot without the patch, other distributions won’t either. So I considered it safe enough to drop them.
>>>> -Michael
>>>>> Thanks, and best regards,
>>>>> Peter Müller
>>>>>> diff --git a/config/rootfiles/common/dracut b/config/rootfiles/common/dracut
>>>>>> index 03379b4d6..3143f49c3 100644
>>>>>> --- a/config/rootfiles/common/dracut
>>>>>> +++ b/config/rootfiles/common/dracut
>>>>>> @@ -3,84 +3,461 @@ etc/dracut.conf.d
>>>>>> usr/bin/dracut
>>>>>> usr/bin/dracut-catimages
>>>>>> usr/bin/lsinitrd
>>>>>> -usr/bin/mkinitrd
>>>>>> -usr/lib/dracut
>>>>>> -#usr/lib/dracut/dracut-functions
>>>>>> -#usr/lib/dracut/dracut-functions.sh
>>>>>> -#usr/lib/dracut/dracut-initramfs-restore
>>>>>> -#usr/lib/dracut/dracut-install
>>>>>> -#usr/lib/dracut/dracut-logger.sh
>>>>>> -#usr/lib/dracut/dracut-version.sh
>>>>>> -#usr/lib/dracut/dracut.conf.d
>>>>>> +#usr/lib/dracut
>>>>>> +usr/lib/dracut/dracut-functions
>>>>>> +usr/lib/dracut/dracut-functions.sh
>>>>>> +usr/lib/dracut/dracut-init.sh
>>>>>> +usr/lib/dracut/dracut-initramfs-restore
>>>>>> +usr/lib/dracut/dracut-install
>>>>>> +usr/lib/dracut/dracut-logger.sh
>>>>>> +usr/lib/dracut/dracut-util
>>>>>> +usr/lib/dracut/dracut-version.sh
>>>>>> +usr/lib/dracut/dracut.conf.d
>>>>>> #usr/lib/dracut/modules.d
>>>>>> -#usr/lib/dracut/modules.d/00bash
>>>>>> -#usr/lib/dracut/modules.d/00bash/module-setup.sh
>>>>>> -#usr/lib/dracut/modules.d/02caps
>>>>>> -#usr/lib/dracut/modules.d/02caps/README
>>>>>> -#usr/lib/dracut/modules.d/02caps/caps.sh
>>>>>> -#usr/lib/dracut/modules.d/02caps/module-setup.sh
>>>>>> -#usr/lib/dracut/modules.d/03rescue
>>>>>> -#usr/lib/dracut/modules.d/03rescue/module-setup.sh
>>>>>> +usr/lib/dracut/modules.d/00bash
>>>>>> +usr/lib/dracut/modules.d/00bash/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/00dash
>>>>>> +#usr/lib/dracut/modules.d/00dash/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/00mksh
>>>>>> +#usr/lib/dracut/modules.d/00mksh/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/00systemd
>>>>>> +#usr/lib/dracut/modules.d/00systemd-network-management
>>>>>> +#usr/lib/dracut/modules.d/00systemd-network-management/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/00systemd/module-setup.sh
>>>>>> +usr/lib/dracut/modules.d/00warpclock
>>>>>> +usr/lib/dracut/modules.d/00warpclock/module-setup.sh
>>>>>> +usr/lib/dracut/modules.d/00warpclock/warpclock.sh
>>>>>> +#usr/lib/dracut/modules.d/01fips
>>>>>> +#usr/lib/dracut/modules.d/01fips/fips-boot.sh
>>>>>> +#usr/lib/dracut/modules.d/01fips/fips-load-crypto.sh
>>>>>> +#usr/lib/dracut/modules.d/01fips/fips-noboot.sh
>>>>>> +#usr/lib/dracut/modules.d/01fips/fips.sh
>>>>>> +#usr/lib/dracut/modules.d/01fips/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-ac-power
>>>>>> +#usr/lib/dracut/modules.d/01systemd-ac-power/99-initrd-power-targets.rules
>>>>>> +#usr/lib/dracut/modules.d/01systemd-ac-power/initrd-on-ac-power.target
>>>>>> +#usr/lib/dracut/modules.d/01systemd-ac-power/initrd-on-battery-power.target
>>>>>> +#usr/lib/dracut/modules.d/01systemd-ac-power/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-ask-password
>>>>>> +#usr/lib/dracut/modules.d/01systemd-ask-password/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-coredump
>>>>>> +#usr/lib/dracut/modules.d/01systemd-coredump/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-hostnamed
>>>>>> +#usr/lib/dracut/modules.d/01systemd-hostnamed/99-systemd-networkd-dracut.conf
>>>>>> +#usr/lib/dracut/modules.d/01systemd-hostnamed/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-hostnamed/org.freedesktop.hostname1_dracut.conf
>>>>>> +#usr/lib/dracut/modules.d/01systemd-hostnamed/systemd-hostname-dracut.conf
>>>>>> +#usr/lib/dracut/modules.d/01systemd-initrd
>>>>>> +#usr/lib/dracut/modules.d/01systemd-initrd/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-integritysetup
>>>>>> +#usr/lib/dracut/modules.d/01systemd-integritysetup/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-journald
>>>>>> +#usr/lib/dracut/modules.d/01systemd-journald/initrd.conf
>>>>>> +#usr/lib/dracut/modules.d/01systemd-journald/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-ldconfig
>>>>>> +#usr/lib/dracut/modules.d/01systemd-ldconfig/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-modules-load
>>>>>> +#usr/lib/dracut/modules.d/01systemd-modules-load/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-networkd
>>>>>> +#usr/lib/dracut/modules.d/01systemd-networkd/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-repart
>>>>>> +#usr/lib/dracut/modules.d/01systemd-repart/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-resolved
>>>>>> +#usr/lib/dracut/modules.d/01systemd-resolved/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-resolved/resolved-tmpfile-dracut.conf
>>>>>> +#usr/lib/dracut/modules.d/01systemd-rfkill
>>>>>> +#usr/lib/dracut/modules.d/01systemd-rfkill/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-sysctl
>>>>>> +#usr/lib/dracut/modules.d/01systemd-sysctl/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-sysext
>>>>>> +#usr/lib/dracut/modules.d/01systemd-sysext/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-sysusers
>>>>>> +#usr/lib/dracut/modules.d/01systemd-sysusers/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-sysusers/sysusers-dracut.conf
>>>>>> +#usr/lib/dracut/modules.d/01systemd-timedated
>>>>>> +#usr/lib/dracut/modules.d/01systemd-timedated/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-timesyncd
>>>>>> +#usr/lib/dracut/modules.d/01systemd-timesyncd/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-timesyncd/timesyncd-tmpfile-dracut.conf
>>>>>> +#usr/lib/dracut/modules.d/01systemd-tmpfiles
>>>>>> +#usr/lib/dracut/modules.d/01systemd-tmpfiles/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-udevd
>>>>>> +#usr/lib/dracut/modules.d/01systemd-udevd/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/01systemd-veritysetup
>>>>>> +#usr/lib/dracut/modules.d/01systemd-veritysetup/module-setup.sh
>>>>>> +usr/lib/dracut/modules.d/02caps
>>>>>> +usr/lib/dracut/modules.d/02caps/README
>>>>>> +usr/lib/dracut/modules.d/02caps/caps.sh
>>>>>> +usr/lib/dracut/modules.d/02caps/module-setup.sh
>>>>>> +usr/lib/dracut/modules.d/03modsign
>>>>>> +usr/lib/dracut/modules.d/03modsign/load-modsign-keys.sh
>>>>>> +usr/lib/dracut/modules.d/03modsign/module-setup.sh
>>>>>> +usr/lib/dracut/modules.d/03rescue
>>>>>> +usr/lib/dracut/modules.d/03rescue/module-setup.sh
>>>>>> #usr/lib/dracut/modules.d/04watchdog
>>>>>> +#usr/lib/dracut/modules.d/04watchdog-modules
>>>>>> +#usr/lib/dracut/modules.d/04watchdog-modules/module-setup.sh
>>>>>> #usr/lib/dracut/modules.d/04watchdog/module-setup.sh
>>>>>> #usr/lib/dracut/modules.d/04watchdog/watchdog-stop.sh
>>>>>> #usr/lib/dracut/modules.d/04watchdog/watchdog.sh
>>>>>> -#usr/lib/dracut/modules.d/10i18n
>>>>>> -#usr/lib/dracut/modules.d/10i18n/10-console.rules
>>>>>> -#usr/lib/dracut/modules.d/10i18n/README
>>>>>> -#usr/lib/dracut/modules.d/10i18n/console_init.sh
>>>>>> -#usr/lib/dracut/modules.d/10i18n/module-setup.sh
>>>>>> -#usr/lib/dracut/modules.d/10i18n/parse-i18n.sh
>>>>>> -#usr/lib/dracut/modules.d/50drm
>>>>>> -#usr/lib/dracut/modules.d/50drm/module-setup.sh
>>>>>> -#usr/lib/dracut/modules.d/90kernel-modules
>>>>>> -#usr/lib/dracut/modules.d/90kernel-modules/insmodpost.sh
>>>>>> -#usr/lib/dracut/modules.d/90kernel-modules/module-setup.sh
>>>>>> -#usr/lib/dracut/modules.d/90kernel-modules/parse-kernel.sh
>>>>>> -#usr/lib/dracut/modules.d/90mdraid
>>>>>> -#usr/lib/dracut/modules.d/90mdraid/59-persistent-storage-md.rules
>>>>>> -#usr/lib/dracut/modules.d/90mdraid/65-md-incremental-imsm.rules
>>>>>> -#usr/lib/dracut/modules.d/90mdraid/md-noddf.sh
>>>>>> -#usr/lib/dracut/modules.d/90mdraid/md-noimsm.sh
>>>>>> -#usr/lib/dracut/modules.d/90mdraid/md-shutdown.sh
>>>>>> -#usr/lib/dracut/modules.d/90mdraid/mdmon-pre-shutdown.sh
>>>>>> -#usr/lib/dracut/modules.d/90mdraid/mdmon-pre-udev.sh
>>>>>> -#usr/lib/dracut/modules.d/90mdraid/mdraid-cleanup.sh
>>>>>> -#usr/lib/dracut/modules.d/90mdraid/mdraid-needshutdown.sh
>>>>>> -#usr/lib/dracut/modules.d/90mdraid/mdraid-waitclean.sh
>>>>>> -#usr/lib/dracut/modules.d/90mdraid/mdraid_start.sh
>>>>>> -#usr/lib/dracut/modules.d/90mdraid/module-setup.sh
>>>>>> -#usr/lib/dracut/modules.d/90mdraid/parse-md.sh
>>>>>> +#usr/lib/dracut/modules.d/05busybox
>>>>>> +#usr/lib/dracut/modules.d/05busybox/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/06dbus-broker
>>>>>> +#usr/lib/dracut/modules.d/06dbus-broker/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/06dbus-daemon
>>>>>> +#usr/lib/dracut/modules.d/06dbus-daemon/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/06rngd
>>>>>> +#usr/lib/dracut/modules.d/06rngd/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/06rngd/rngd.service
>>>>>> +usr/lib/dracut/modules.d/09dbus
>>>>>> +usr/lib/dracut/modules.d/09dbus/module-setup.sh
>>>>>> +usr/lib/dracut/modules.d/10i18n
>>>>>> +usr/lib/dracut/modules.d/10i18n/10-console.rules
>>>>>> +usr/lib/dracut/modules.d/10i18n/README
>>>>>> +usr/lib/dracut/modules.d/10i18n/console_init.sh
>>>>>> +usr/lib/dracut/modules.d/10i18n/module-setup.sh
>>>>>> +usr/lib/dracut/modules.d/10i18n/parse-i18n.sh
>>>>>> +#usr/lib/dracut/modules.d/30convertfs
>>>>>> +#usr/lib/dracut/modules.d/30convertfs/convertfs.sh
>>>>>> +#usr/lib/dracut/modules.d/30convertfs/do-convertfs.sh
>>>>>> +#usr/lib/dracut/modules.d/30convertfs/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-legacy
>>>>>> +#usr/lib/dracut/modules.d/35network-legacy/dhclient-script.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-legacy/dhclient.conf
>>>>>> +#usr/lib/dracut/modules.d/35network-legacy/dhcp-multi.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-legacy/ifup.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-legacy/kill-dhclient.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-legacy/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-legacy/net-genrules.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-legacy/parse-bond.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-legacy/parse-bridge.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-legacy/parse-ibft.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-legacy/parse-ifname.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-legacy/parse-ip-opts.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-legacy/parse-team.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-legacy/parse-vlan.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-manager
>>>>>> +#usr/lib/dracut/modules.d/35network-manager/initrd-no-auto-default.conf
>>>>>> +#usr/lib/dracut/modules.d/35network-manager/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-manager/nm-config.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-manager/nm-initrd.service
>>>>>> +#usr/lib/dracut/modules.d/35network-manager/nm-lib.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-manager/nm-run.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-manager/nm-wait-online-initrd.service
>>>>>> +#usr/lib/dracut/modules.d/35network-wicked
>>>>>> +#usr/lib/dracut/modules.d/35network-wicked/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-wicked/wicked-config.sh
>>>>>> +#usr/lib/dracut/modules.d/35network-wicked/wicked-run.sh
>>>>>> +#usr/lib/dracut/modules.d/40network
>>>>>> +#usr/lib/dracut/modules.d/40network/dhcp-root.sh
>>>>>> +#usr/lib/dracut/modules.d/40network/ifname-genrules.sh
>>>>>> +#usr/lib/dracut/modules.d/40network/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/40network/net-lib.sh
>>>>>> +#usr/lib/dracut/modules.d/40network/netroot.sh
>>>>>> +#usr/lib/dracut/modules.d/45ifcfg
>>>>>> +#usr/lib/dracut/modules.d/45ifcfg/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/45ifcfg/write-ifcfg.sh
>>>>>> +#usr/lib/dracut/modules.d/45url-lib
>>>>>> +#usr/lib/dracut/modules.d/45url-lib/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/45url-lib/url-lib.sh
>>>>>> +usr/lib/dracut/modules.d/50drm
>>>>>> +usr/lib/dracut/modules.d/50drm/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/50gensplash
>>>>>> +#usr/lib/dracut/modules.d/50gensplash/README
>>>>>> +#usr/lib/dracut/modules.d/50gensplash/gensplash-emergency.sh
>>>>>> +#usr/lib/dracut/modules.d/50gensplash/gensplash-newroot.sh
>>>>>> +#usr/lib/dracut/modules.d/50gensplash/gensplash-pretrigger.sh
>>>>>> +#usr/lib/dracut/modules.d/50gensplash/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/50plymouth
>>>>>> +#usr/lib/dracut/modules.d/50plymouth/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/50plymouth/plymouth-emergency.sh
>>>>>> +#usr/lib/dracut/modules.d/50plymouth/plymouth-newroot.sh
>>>>>> +#usr/lib/dracut/modules.d/50plymouth/plymouth-populate-initrd.sh
>>>>>> +#usr/lib/dracut/modules.d/50plymouth/plymouth-pretrigger.sh
>>>>>> +#usr/lib/dracut/modules.d/62bluetooth
>>>>>> +#usr/lib/dracut/modules.d/62bluetooth/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/80cms
>>>>>> +#usr/lib/dracut/modules.d/80cms/cms-write-ifcfg.sh
>>>>>> +#usr/lib/dracut/modules.d/80cms/cmsifup.sh
>>>>>> +#usr/lib/dracut/modules.d/80cms/cmssetup.sh
>>>>>> +#usr/lib/dracut/modules.d/80cms/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/80lvmmerge
>>>>>> +#usr/lib/dracut/modules.d/80lvmmerge/README.md
>>>>>> +#usr/lib/dracut/modules.d/80lvmmerge/lvmmerge.sh
>>>>>> +#usr/lib/dracut/modules.d/80lvmmerge/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/81cio_ignore
>>>>>> +#usr/lib/dracut/modules.d/81cio_ignore/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/81cio_ignore/parse-cio_accept.sh
>>>>>> +#usr/lib/dracut/modules.d/90btrfs
>>>>>> +#usr/lib/dracut/modules.d/90btrfs/80-btrfs.rules
>>>>>> +#usr/lib/dracut/modules.d/90btrfs/btrfs_device_ready.sh
>>>>>> +#usr/lib/dracut/modules.d/90btrfs/btrfs_finished.sh
>>>>>> +#usr/lib/dracut/modules.d/90btrfs/btrfs_timeout.sh
>>>>>> +#usr/lib/dracut/modules.d/90btrfs/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/90crypt
>>>>>> +#usr/lib/dracut/modules.d/90crypt/crypt-cleanup.sh
>>>>>> +#usr/lib/dracut/modules.d/90crypt/crypt-lib.sh
>>>>>> +#usr/lib/dracut/modules.d/90crypt/crypt-run-generator.sh
>>>>>> +#usr/lib/dracut/modules.d/90crypt/cryptroot-ask.sh
>>>>>> +#usr/lib/dracut/modules.d/90crypt/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/90crypt/parse-crypt.sh
>>>>>> +#usr/lib/dracut/modules.d/90crypt/parse-keydev.sh
>>>>>> +#usr/lib/dracut/modules.d/90crypt/probe-keydev.sh
>>>>>> +usr/lib/dracut/modules.d/90dm
>>>>>> +usr/lib/dracut/modules.d/90dm/11-dm.rules
>>>>>> +usr/lib/dracut/modules.d/90dm/59-persistent-storage-dm.rules
>>>>>> +usr/lib/dracut/modules.d/90dm/dm-pre-udev.sh
>>>>>> +usr/lib/dracut/modules.d/90dm/dm-shutdown.sh
>>>>>> +usr/lib/dracut/modules.d/90dm/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/90dmraid
>>>>>> +#usr/lib/dracut/modules.d/90dmraid/61-dmraid-imsm.rules
>>>>>> +#usr/lib/dracut/modules.d/90dmraid/dmraid.sh
>>>>>> +#usr/lib/dracut/modules.d/90dmraid/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/90dmraid/parse-dm.sh
>>>>>> +#usr/lib/dracut/modules.d/90dmsquash-live
>>>>>> +#usr/lib/dracut/modules.d/90dmsquash-live-ntfs
>>>>>> +#usr/lib/dracut/modules.d/90dmsquash-live-ntfs/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/90dmsquash-live/apply-live-updates.sh
>>>>>> +#usr/lib/dracut/modules.d/90dmsquash-live/checkisomd5(a).service
>>>>>> +#usr/lib/dracut/modules.d/90dmsquash-live/dmsquash-generator.sh
>>>>>> +#usr/lib/dracut/modules.d/90dmsquash-live/dmsquash-live-genrules.sh
>>>>>> +#usr/lib/dracut/modules.d/90dmsquash-live/dmsquash-live-root.sh
>>>>>> +#usr/lib/dracut/modules.d/90dmsquash-live/dmsquash-liveiso-genrules.sh
>>>>>> +#usr/lib/dracut/modules.d/90dmsquash-live/iso-scan.sh
>>>>>> +#usr/lib/dracut/modules.d/90dmsquash-live/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/90dmsquash-live/parse-dmsquash-live.sh
>>>>>> +#usr/lib/dracut/modules.d/90dmsquash-live/parse-iso-scan.sh
>>>>>> +usr/lib/dracut/modules.d/90kernel-modules
>>>>>> +usr/lib/dracut/modules.d/90kernel-modules-extra
>>>>>> +usr/lib/dracut/modules.d/90kernel-modules-extra/module-setup.sh
>>>>>> +usr/lib/dracut/modules.d/90kernel-modules/insmodpost.sh
>>>>>> +usr/lib/dracut/modules.d/90kernel-modules/module-setup.sh
>>>>>> +usr/lib/dracut/modules.d/90kernel-modules/parse-kernel.sh
>>>>>> +#usr/lib/dracut/modules.d/90kernel-network-modules
>>>>>> +#usr/lib/dracut/modules.d/90kernel-network-modules/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/90livenet
>>>>>> +#usr/lib/dracut/modules.d/90livenet/fetch-liveupdate.sh
>>>>>> +#usr/lib/dracut/modules.d/90livenet/livenet-generator.sh
>>>>>> +#usr/lib/dracut/modules.d/90livenet/livenetroot.sh
>>>>>> +#usr/lib/dracut/modules.d/90livenet/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/90livenet/parse-livenet.sh
>>>>>> +usr/lib/dracut/modules.d/90lvm
>>>>>> +usr/lib/dracut/modules.d/90lvm/64-lvm.rules
>>>>>> +usr/lib/dracut/modules.d/90lvm/lvm_scan.sh
>>>>>> +usr/lib/dracut/modules.d/90lvm/module-setup.sh
>>>>>> +usr/lib/dracut/modules.d/90lvm/parse-lvm.sh
>>>>>> +usr/lib/dracut/modules.d/90mdraid
>>>>>> +usr/lib/dracut/modules.d/90mdraid/59-persistent-storage-md.rules
>>>>>> +usr/lib/dracut/modules.d/90mdraid/65-md-incremental-imsm.rules
>>>>>> +usr/lib/dracut/modules.d/90mdraid/md-shutdown.sh
>>>>>> +usr/lib/dracut/modules.d/90mdraid/mdmon-pre-shutdown.sh
>>>>>> +usr/lib/dracut/modules.d/90mdraid/mdmon-pre-udev.sh
>>>>>> +usr/lib/dracut/modules.d/90mdraid/mdraid-cleanup.sh
>>>>>> +usr/lib/dracut/modules.d/90mdraid/mdraid-needshutdown.sh
>>>>>> +usr/lib/dracut/modules.d/90mdraid/mdraid-waitclean.sh
>>>>>> +usr/lib/dracut/modules.d/90mdraid/mdraid_start.sh
>>>>>> +usr/lib/dracut/modules.d/90mdraid/module-setup.sh
>>>>>> +usr/lib/dracut/modules.d/90mdraid/parse-md.sh
>>>>>> +#usr/lib/dracut/modules.d/90multipath
>>>>>> +#usr/lib/dracut/modules.d/90multipath/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/90multipath/multipath-shutdown.sh
>>>>>> +#usr/lib/dracut/modules.d/90multipath/multipathd-configure.service
>>>>>> +#usr/lib/dracut/modules.d/90multipath/multipathd-needshutdown.sh
>>>>>> +#usr/lib/dracut/modules.d/90multipath/multipathd-stop.sh
>>>>>> +#usr/lib/dracut/modules.d/90multipath/multipathd.service
>>>>>> +#usr/lib/dracut/modules.d/90multipath/multipathd.sh
>>>>>> +#usr/lib/dracut/modules.d/90nvdimm
>>>>>> +#usr/lib/dracut/modules.d/90nvdimm/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/90ppcmac
>>>>>> +#usr/lib/dracut/modules.d/90ppcmac/load-thermal.sh
>>>>>> +#usr/lib/dracut/modules.d/90ppcmac/module-setup.sh
>>>>>> +usr/lib/dracut/modules.d/90qemu
>>>>>> +#usr/lib/dracut/modules.d/90qemu-net
>>>>>> +#usr/lib/dracut/modules.d/90qemu-net/module-setup.sh
>>>>>> +usr/lib/dracut/modules.d/90qemu/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/91crypt-gpg
>>>>>> +#usr/lib/dracut/modules.d/91crypt-gpg/README
>>>>>> +#usr/lib/dracut/modules.d/91crypt-gpg/crypt-gpg-lib.sh
>>>>>> +#usr/lib/dracut/modules.d/91crypt-gpg/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/91crypt-loop
>>>>>> +#usr/lib/dracut/modules.d/91crypt-loop/crypt-loop-lib.sh
>>>>>> +#usr/lib/dracut/modules.d/91crypt-loop/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/91fido2
>>>>>> +#usr/lib/dracut/modules.d/91fido2/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/91pcsc
>>>>>> +#usr/lib/dracut/modules.d/91pcsc/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/91pcsc/pcscd.service
>>>>>> +#usr/lib/dracut/modules.d/91pcsc/pcscd.socket
>>>>>> +#usr/lib/dracut/modules.d/91pkcs11
>>>>>> +#usr/lib/dracut/modules.d/91pkcs11/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/91tpm2-tss
>>>>>> +#usr/lib/dracut/modules.d/91tpm2-tss/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/91zipl
>>>>>> +#usr/lib/dracut/modules.d/91zipl/install_zipl_cmdline.sh
>>>>>> +#usr/lib/dracut/modules.d/91zipl/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/91zipl/parse-zipl.sh
>>>>>> +#usr/lib/dracut/modules.d/95cifs
>>>>>> +#usr/lib/dracut/modules.d/95cifs/cifs-lib.sh
>>>>>> +#usr/lib/dracut/modules.d/95cifs/cifsroot.sh
>>>>>> +#usr/lib/dracut/modules.d/95cifs/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95cifs/parse-cifsroot.sh
>>>>>> +#usr/lib/dracut/modules.d/95dasd
>>>>>> +#usr/lib/dracut/modules.d/95dasd/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95dasd/parse-dasd.sh
>>>>>> +#usr/lib/dracut/modules.d/95dasd_mod
>>>>>> +#usr/lib/dracut/modules.d/95dasd_mod/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95dasd_mod/parse-dasd-mod.sh
>>>>>> +#usr/lib/dracut/modules.d/95dasd_rules
>>>>>> +#usr/lib/dracut/modules.d/95dasd_rules/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95dasd_rules/parse-dasd.sh
>>>>>> +#usr/lib/dracut/modules.d/95dcssblk
>>>>>> +#usr/lib/dracut/modules.d/95dcssblk/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95dcssblk/parse-dcssblk.sh
>>>>>> #usr/lib/dracut/modules.d/95debug
>>>>>> #usr/lib/dracut/modules.d/95debug/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95fcoe
>>>>>> +#usr/lib/dracut/modules.d/95fcoe-uefi
>>>>>> +#usr/lib/dracut/modules.d/95fcoe-uefi/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95fcoe-uefi/parse-uefifcoe.sh
>>>>>> +#usr/lib/dracut/modules.d/95fcoe/cleanup-fcoe.sh
>>>>>> +#usr/lib/dracut/modules.d/95fcoe/fcoe-edd.sh
>>>>>> +#usr/lib/dracut/modules.d/95fcoe/fcoe-up.sh
>>>>>> +#usr/lib/dracut/modules.d/95fcoe/lldpad.sh
>>>>>> +#usr/lib/dracut/modules.d/95fcoe/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95fcoe/parse-fcoe.sh
>>>>>> +#usr/lib/dracut/modules.d/95fcoe/stop-fcoe.sh
>>>>>> #usr/lib/dracut/modules.d/95fstab-sys
>>>>>> #usr/lib/dracut/modules.d/95fstab-sys/module-setup.sh
>>>>>> #usr/lib/dracut/modules.d/95fstab-sys/mount-sys.sh
>>>>>> -#usr/lib/dracut/modules.d/95rootfs-block
>>>>>> -#usr/lib/dracut/modules.d/95rootfs-block/block-genrules.sh
>>>>>> -#usr/lib/dracut/modules.d/95rootfs-block/module-setup.sh
>>>>>> -#usr/lib/dracut/modules.d/95rootfs-block/mount-root.sh
>>>>>> -#usr/lib/dracut/modules.d/95rootfs-block/parse-block.sh
>>>>>> -#usr/lib/dracut/modules.d/95rootfs-block/rootfallback.sh
>>>>>> -#usr/lib/dracut/modules.d/95terminfo
>>>>>> -#usr/lib/dracut/modules.d/95terminfo/module-setup.sh
>>>>>> -#usr/lib/dracut/modules.d/95udev-rules
>>>>>> -#usr/lib/dracut/modules.d/95udev-rules/59-persistent-storage.rules
>>>>>> -#usr/lib/dracut/modules.d/95udev-rules/61-persistent-storage.rules
>>>>>> -#usr/lib/dracut/modules.d/95udev-rules/load-modules.sh
>>>>>> -#usr/lib/dracut/modules.d/95udev-rules/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95iscsi
>>>>>> +#usr/lib/dracut/modules.d/95iscsi/cleanup-iscsi.sh
>>>>>> +#usr/lib/dracut/modules.d/95iscsi/iscsiroot.sh
>>>>>> +#usr/lib/dracut/modules.d/95iscsi/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95iscsi/mount-lun.sh
>>>>>> +#usr/lib/dracut/modules.d/95iscsi/parse-iscsiroot.sh
>>>>>> +#usr/lib/dracut/modules.d/95lunmask
>>>>>> +#usr/lib/dracut/modules.d/95lunmask/fc_transport_scan_lun.sh
>>>>>> +#usr/lib/dracut/modules.d/95lunmask/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95lunmask/parse-lunmask.sh
>>>>>> +#usr/lib/dracut/modules.d/95lunmask/sas_transport_scan_lun.sh
>>>>>> +#usr/lib/dracut/modules.d/95nbd
>>>>>> +#usr/lib/dracut/modules.d/95nbd/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95nbd/nbd-generator.sh
>>>>>> +#usr/lib/dracut/modules.d/95nbd/nbdroot.sh
>>>>>> +#usr/lib/dracut/modules.d/95nbd/parse-nbdroot.sh
>>>>>> +#usr/lib/dracut/modules.d/95nfs
>>>>>> +#usr/lib/dracut/modules.d/95nfs/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95nfs/nfs-lib.sh
>>>>>> +#usr/lib/dracut/modules.d/95nfs/nfs-start-rpc.sh
>>>>>> +#usr/lib/dracut/modules.d/95nfs/nfsroot-cleanup.sh
>>>>>> +#usr/lib/dracut/modules.d/95nfs/nfsroot.sh
>>>>>> +#usr/lib/dracut/modules.d/95nfs/parse-nfsroot.sh
>>>>>> +#usr/lib/dracut/modules.d/95nvmf
>>>>>> +#usr/lib/dracut/modules.d/95nvmf/95-nvmf-initqueue.rules
>>>>>> +#usr/lib/dracut/modules.d/95nvmf/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95nvmf/nvmf-autoconnect.sh
>>>>>> +#usr/lib/dracut/modules.d/95nvmf/parse-nvmf-boot-connections.sh
>>>>>> +#usr/lib/dracut/modules.d/95qeth_rules
>>>>>> +#usr/lib/dracut/modules.d/95qeth_rules/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95resume
>>>>>> +#usr/lib/dracut/modules.d/95resume/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95resume/parse-resume.sh
>>>>>> +#usr/lib/dracut/modules.d/95resume/resume.sh
>>>>>> +usr/lib/dracut/modules.d/95rootfs-block
>>>>>> +usr/lib/dracut/modules.d/95rootfs-block/block-genrules.sh
>>>>>> +usr/lib/dracut/modules.d/95rootfs-block/module-setup.sh
>>>>>> +usr/lib/dracut/modules.d/95rootfs-block/mount-root.sh
>>>>>> +usr/lib/dracut/modules.d/95rootfs-block/parse-block.sh
>>>>>> +usr/lib/dracut/modules.d/95rootfs-block/rootfallback.sh
>>>>>> +#usr/lib/dracut/modules.d/95ssh-client
>>>>>> +#usr/lib/dracut/modules.d/95ssh-client/module-setup.sh
>>>>>> +usr/lib/dracut/modules.d/95terminfo
>>>>>> +usr/lib/dracut/modules.d/95terminfo/module-setup.sh
>>>>>> +usr/lib/dracut/modules.d/95udev-rules
>>>>>> +usr/lib/dracut/modules.d/95udev-rules/59-persistent-storage.rules
>>>>>> +usr/lib/dracut/modules.d/95udev-rules/61-persistent-storage.rules
>>>>>> +usr/lib/dracut/modules.d/95udev-rules/load-modules.sh
>>>>>> +usr/lib/dracut/modules.d/95udev-rules/module-setup.sh
>>>>>> #usr/lib/dracut/modules.d/95virtfs
>>>>>> #usr/lib/dracut/modules.d/95virtfs/module-setup.sh
>>>>>> #usr/lib/dracut/modules.d/95virtfs/mount-virtfs.sh
>>>>>> #usr/lib/dracut/modules.d/95virtfs/parse-virtfs.sh
>>>>>> +#usr/lib/dracut/modules.d/95zfcp
>>>>>> +#usr/lib/dracut/modules.d/95zfcp/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95zfcp/parse-zfcp.sh
>>>>>> +#usr/lib/dracut/modules.d/95zfcp_rules
>>>>>> +#usr/lib/dracut/modules.d/95zfcp_rules/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95zfcp_rules/parse-zfcp.sh
>>>>>> +#usr/lib/dracut/modules.d/95znet
>>>>>> +#usr/lib/dracut/modules.d/95znet/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/95znet/parse-ccw.sh
>>>>>> +#usr/lib/dracut/modules.d/96securityfs
>>>>>> +#usr/lib/dracut/modules.d/96securityfs/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/96securityfs/securityfs.sh
>>>>>> +#usr/lib/dracut/modules.d/97biosdevname
>>>>>> +#usr/lib/dracut/modules.d/97biosdevname/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/97biosdevname/parse-biosdevname.sh
>>>>>> +#usr/lib/dracut/modules.d/97masterkey
>>>>>> +#usr/lib/dracut/modules.d/97masterkey/README
>>>>>> +#usr/lib/dracut/modules.d/97masterkey/masterkey.sh
>>>>>> +#usr/lib/dracut/modules.d/97masterkey/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline-ask.service
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline-ask.sh
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline.service
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline.service.8
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline.service.8.asc
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline.sh
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-emergency.service
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-emergency.sh
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-initqueue.service
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-initqueue.service.8
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-initqueue.service.8.asc
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-initqueue.sh
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-mount.service
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-mount.service.8
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-mount.service.8.asc
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-mount.sh
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-mount.service
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-mount.service.8
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-mount.service.8.asc
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-mount.sh
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-pivot.service
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-pivot.service.8
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-pivot.service.8.asc
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-pivot.sh
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-trigger.service
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-trigger.service.8
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-trigger.service.8.asc
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-trigger.sh
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-udev.service
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-udev.service.8
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-udev.service.8.asc
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-udev.sh
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-shutdown-onfailure.service
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-shutdown.service
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-shutdown.service.8
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-shutdown.service.8.asc
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/dracut-tmpfiles.conf
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/emergency.service
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/98dracut-systemd/rootfs-generator.sh
>>>>>> +#usr/lib/dracut/modules.d/98ecryptfs
>>>>>> +#usr/lib/dracut/modules.d/98ecryptfs/README
>>>>>> +#usr/lib/dracut/modules.d/98ecryptfs/ecryptfs-mount.sh
>>>>>> +#usr/lib/dracut/modules.d/98ecryptfs/module-setup.sh
>>>>>> #usr/lib/dracut/modules.d/98integrity
>>>>>> #usr/lib/dracut/modules.d/98integrity/README
>>>>>> #usr/lib/dracut/modules.d/98integrity/evm-enable.sh
>>>>>> +#usr/lib/dracut/modules.d/98integrity/ima-keys-load.sh
>>>>>> #usr/lib/dracut/modules.d/98integrity/ima-policy-load.sh
>>>>>> #usr/lib/dracut/modules.d/98integrity/module-setup.sh
>>>>>> #usr/lib/dracut/modules.d/98pollcdrom
>>>>>> #usr/lib/dracut/modules.d/98pollcdrom/module-setup.sh
>>>>>> #usr/lib/dracut/modules.d/98pollcdrom/pollcdrom.sh
>>>>>> +#usr/lib/dracut/modules.d/98selinux
>>>>>> +#usr/lib/dracut/modules.d/98selinux/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/98selinux/selinux-loadpolicy.sh
>>>>>> #usr/lib/dracut/modules.d/98syslog
>>>>>> #usr/lib/dracut/modules.d/98syslog/README
>>>>>> #usr/lib/dracut/modules.d/98syslog/module-setup.sh
>>>>>> @@ -89,25 +466,39 @@ usr/lib/dracut
>>>>>> #usr/lib/dracut/modules.d/98syslog/rsyslogd-start.sh
>>>>>> #usr/lib/dracut/modules.d/98syslog/rsyslogd-stop.sh
>>>>>> #usr/lib/dracut/modules.d/98syslog/syslog-cleanup.sh
>>>>>> -#usr/lib/dracut/modules.d/98syslog/syslog-genrules.sh
>>>>>> -#usr/lib/dracut/modules.d/99base
>>>>>> -#usr/lib/dracut/modules.d/99base/dracut-lib.sh
>>>>>> -#usr/lib/dracut/modules.d/99base/init.sh
>>>>>> -#usr/lib/dracut/modules.d/99base/initqueue.sh
>>>>>> -#usr/lib/dracut/modules.d/99base/loginit.sh
>>>>>> -#usr/lib/dracut/modules.d/99base/module-setup.sh
>>>>>> -#usr/lib/dracut/modules.d/99base/parse-root-opts.sh
>>>>>> -#usr/lib/dracut/modules.d/99base/rdsosreport.sh
>>>>>> -#usr/lib/dracut/modules.d/99fs-lib
>>>>>> -#usr/lib/dracut/modules.d/99fs-lib/fs-lib.sh
>>>>>> -#usr/lib/dracut/modules.d/99fs-lib/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/98usrmount
>>>>>> +#usr/lib/dracut/modules.d/98usrmount/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/98usrmount/mount-usr.sh
>>>>>> +usr/lib/dracut/modules.d/99base
>>>>>> +usr/lib/dracut/modules.d/99base/dracut-dev-lib.sh
>>>>>> +usr/lib/dracut/modules.d/99base/dracut-lib.sh
>>>>>> +usr/lib/dracut/modules.d/99base/init.sh
>>>>>> +usr/lib/dracut/modules.d/99base/initqueue.sh
>>>>>> +usr/lib/dracut/modules.d/99base/loginit.sh
>>>>>> +usr/lib/dracut/modules.d/99base/module-setup.sh
>>>>>> +usr/lib/dracut/modules.d/99base/parse-root-opts.sh
>>>>>> +usr/lib/dracut/modules.d/99base/rdsosreport.sh
>>>>>> +usr/lib/dracut/modules.d/99fs-lib
>>>>>> +usr/lib/dracut/modules.d/99fs-lib/fs-lib.sh
>>>>>> +usr/lib/dracut/modules.d/99fs-lib/module-setup.sh
>>>>>> #usr/lib/dracut/modules.d/99img-lib
>>>>>> #usr/lib/dracut/modules.d/99img-lib/img-lib.sh
>>>>>> #usr/lib/dracut/modules.d/99img-lib/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/99memstrack
>>>>>> +#usr/lib/dracut/modules.d/99memstrack/memstrack-report.sh
>>>>>> +#usr/lib/dracut/modules.d/99memstrack/memstrack-start.sh
>>>>>> +#usr/lib/dracut/modules.d/99memstrack/memstrack.service
>>>>>> +#usr/lib/dracut/modules.d/99memstrack/module-setup.sh
>>>>>> #usr/lib/dracut/modules.d/99shutdown
>>>>>> #usr/lib/dracut/modules.d/99shutdown/module-setup.sh
>>>>>> #usr/lib/dracut/modules.d/99shutdown/shutdown.sh
>>>>>> -#usr/lib/dracut/skipcpio
>>>>>> +#usr/lib/dracut/modules.d/99squash
>>>>>> +#usr/lib/dracut/modules.d/99squash/init-squash.sh
>>>>>> +#usr/lib/dracut/modules.d/99squash/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/99uefi-lib
>>>>>> +#usr/lib/dracut/modules.d/99uefi-lib/module-setup.sh
>>>>>> +#usr/lib/dracut/modules.d/99uefi-lib/uefi-lib.sh
>>>>>> +usr/lib/dracut/skipcpio
>>>>>> #usr/lib/kernel
>>>>>> #usr/lib/kernel/install.d
>>>>>> #usr/lib/kernel/install.d/50-dracut.install
>>>>>> @@ -130,5 +521,4 @@ usr/lib/dracut
>>>>>> #usr/share/man/man8/dracut-pre-udev.service.8
>>>>>> #usr/share/man/man8/dracut-shutdown.service.8
>>>>>> #usr/share/man/man8/dracut.8
>>>>>> -#usr/share/man/man8/mkinitrd-suse.8
>>>>>> -#usr/share/man/man8/mkinitrd.8
>>>>>> +#usr/share/pkgconfig/dracut.pc
>>>>>> diff --git a/lfs/dracut b/lfs/dracut
>>>>>> index c4f7231b1..26c0c0cf6 100644
>>>>>> --- a/lfs/dracut
>>>>>> +++ b/lfs/dracut
>>>>>> @@ -1,7 +1,7 @@
>>>>>> ###############################################################################
>>>>>> #                                                                             #
>>>>>> # IPFire.org - A linux based firewall                                         #
>>>>>> -# Copyright (C) 2007-2018  IPFire Team  <info(a)ipfire.org>                     #
>>>>>> +# Copyright (C) 2007-2022  IPFire Team  <info(a)ipfire.org>                     #
>>>>>> #                                                                             #
>>>>>> # This program is free software: you can redistribute it and/or modify        #
>>>>>> # it under the terms of the GNU General Public License as published by        #
>>>>>> @@ -24,7 +24,7 @@
>>>>>>   include Config
>>>>>> -VER        = 038
>>>>>> +VER        = 056
>>>>>>   THISAPP    = dracut-$(VER)
>>>>>> DL_FILE    = $(THISAPP).tar.xz
>>>>>> @@ -40,7 +40,7 @@ objects = $(DL_FILE)
>>>>>>   $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>>>>>> -$(DL_FILE)_MD5 = 4487bd98000cc536c5c3839a2f112831
>>>>>> +$(DL_FILE)_MD5 = 17d51f3ccc3a3a790bab6da0355ca4c2
>>>>>>   install : $(TARGET)
>>>>>> @@ -70,14 +70,10 @@ $(subst %,%_MD5,$(objects)) :
>>>>>> $(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>>>>>> 	@$(PREBUILD)
>>>>>> 	@rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar axf $(DIR_DL)/$(DL_FILE)
>>>>>> -	cd $(DIR_APP) && patch -Np1 -i $(DIR_SRC)/src/patches/dracut-038-always-enable-mdraid.patch
>>>>>> -	cd $(DIR_APP) && patch -Np1 -i $(DIR_SRC)/src/patches/dracut-038_add_hyperv-keyboard_and_sdhci-pci.patch
>>>>>> -
>>>>>> +	cd $(DIR_APP) && ./configure --prefix=/usr --sbindir=/sbin --sysconfdir=/etc
>>>>>> 	cd $(DIR_APP) && make $(MAKETUNING)
>>>>>> 	cd $(DIR_APP) && make install sbindir=/sbin sysconfdir=/etc
>>>>>> -	rm -rf /usr/lib/dracut/modules.d/*{biosdevname,bootchart,dash,fips*,modsign,busybox,convertfs,network,ifcfg,url-lib,gensplash,cms,plymouth,btrfs,crypt*,dm,dmraid,dmsquash-live,livenet,lvm,multipath,qemu*,cifs,dasd*,fcoe*,iscsi,nbd,nfs,resume,ssh-client,zfcp*,systemd*,znet,securityfs,masterkey,selinux,usrmount,uefi-lib}
>>>>>> -
>>>>>> 	cp -vf $(DIR_SRC)/config/dracut/dracut.conf /etc/dracut.conf
>>>>>>   	@rm -rf $(DIR_APP)
>>>>>> diff --git a/src/patches/dracut-038-always-enable-mdraid.patch b/src/patches/dracut-038-always-enable-mdraid.patch
>>>>>> deleted file mode 100644
>>>>>> index a65e59a8a..000000000
>>>>>> --- a/src/patches/dracut-038-always-enable-mdraid.patch
>>>>>> +++ /dev/null
>>>>>> @@ -1,55 +0,0 @@
>>>>>> -diff --git a/modules.d/90mdraid/parse-md.sh b/modules.d/90mdraid/parse-md.sh
>>>>>> -index dd7bda2..7bc944c 100755
>>>>>> ---- a/modules.d/90mdraid/parse-md.sh
>>>>>> -+++ b/modules.d/90mdraid/parse-md.sh
>>>>>> -@@ -4,32 +4,26 @@
>>>>>> -
>>>>>> - MD_UUID=$(getargs rd.md.uuid -d rd_MD_UUID=)
>>>>>> -
>>>>>> --if ( ! [ -n "$MD_UUID" ] && ! getargbool 0 rd.auto ) || ! getargbool 1 rd.md -d -n rd_NO_MD; then
>>>>>> --    info "rd.md=0: removing MD RAID activation"
>>>>>> --    udevproperty rd_NO_MD=1
>>>>>> --else
>>>>>> --    # rewrite the md rules to only process the specified raid array
>>>>>> --    if [ -n "$MD_UUID" ]; then
>>>>>> --        for f in /etc/udev/rules.d/65-md-incremental*.rules; do
>>>>>> --            [ -e "$f" ] || continue
>>>>>> --            while read line; do
>>>>>> --                if [ "${line%%UUID CHECK}" != "$line" ]; then
>>>>>> --                    printf 'IMPORT{program}="/sbin/mdadm --examine --export $tempnode"\n'
>>>>>> --                    for uuid in $MD_UUID; do
>>>>>> --                        printf 'ENV{MD_UUID}=="%s", GOTO="md_uuid_ok"\n' $uuid
>>>>>> --                    done;
>>>>>> --                    printf 'GOTO="md_end"\n'
>>>>>> --                    printf 'LABEL="md_uuid_ok"\n'
>>>>>> --                else
>>>>>> --                    echo "$line"
>>>>>> --                fi
>>>>>> --            done < "${f}" > "${f}.new"
>>>>>> --            mv "${f}.new" "$f"
>>>>>> --        done
>>>>>> --    fi
>>>>>> -+# rewrite the md rules to only process the specified raid array
>>>>>> -+if [ -n "$MD_UUID" ]; then
>>>>>> -+    for f in /etc/udev/rules.d/65-md-incremental*.rules; do
>>>>>> -+        [ -e "$f" ] || continue
>>>>>> -+        while read line; do
>>>>>> -+            if [ "${line%%UUID CHECK}" != "$line" ]; then
>>>>>> -+                printf 'IMPORT{program}="/sbin/mdadm --examine --export $tempnode"\n'
>>>>>> -+                for uuid in $MD_UUID; do
>>>>>> -+                    printf 'ENV{MD_UUID}=="%s", GOTO="md_uuid_ok"\n' $uuid
>>>>>> -+                done;
>>>>>> -+                printf 'GOTO="md_end"\n'
>>>>>> -+                printf 'LABEL="md_uuid_ok"\n'
>>>>>> -+            else
>>>>>> -+                echo "$line"
>>>>>> -+            fi
>>>>>> -+        done < "${f}" > "${f}.new"
>>>>>> -+        mv "${f}.new" "$f"
>>>>>> -+    done
>>>>>> - fi
>>>>>> -
>>>>>> --
>>>>>> - if [ -e /etc/mdadm.conf ] && getargbool 1 rd.md.conf -d -n rd_NO_MDADMCONF; then
>>>>>> -     udevproperty rd_MDADMCONF=1
>>>>>> -     rm -f -- $hookdir/pre-pivot/*mdraid-cleanup.sh
>>>>>> diff --git a/src/patches/dracut-038_add_hyperv-keyboard_and_sdhci-pci.patch b/src/patches/dracut-038_add_hyperv-keyboard_and_sdhci-pci.patch
>>>>>> deleted file mode 100644
>>>>>> index 19ed15fd3..000000000
>>>>>> --- a/src/patches/dracut-038_add_hyperv-keyboard_and_sdhci-pci.patch
>>>>>> +++ /dev/null
>>>>>> @@ -1,12 +0,0 @@
>>>>>> -diff -Naur dracut-038.org/modules.d/90kernel-modules/module-setup.sh dracut-038/modules.d/90kernel-modules/module-setup.sh
>>>>>> ---- dracut-038.org/modules.d/90kernel-modules/module-setup.sh	2014-06-30 12:03:12.000000000 +0200
>>>>>> -+++ dracut-038/modules.d/90kernel-modules/module-setup.sh	2015-05-05 14:58:56.820197839 +0200
>>>>>> -@@ -47,7 +47,7 @@
>>>>>> -             atkbd i8042 usbhid hid-apple hid-sunplus hid-cherry hid-logitech \
>>>>>> -             hid-logitech-dj hid-microsoft firewire-ohci \
>>>>>> -             pcmcia usb_storage nvme hid-hyperv hv-vmbus \
>>>>>> --            sdhci_acpi
>>>>>> -+            hyperv-keyboard sdhci_acpi sdhci_pci
>>>>>> -
>>>>>> -         if [[ "$(uname -p)" == arm* ]]; then
>>>>>> -             # arm specific modules