From: Michael Tremer <michael.tremer@ipfire.org>
To: development@lists.ipfire.org
Subject: Re: [PATCH 2/2] Added new node_exporter package.
Date: Thu, 10 Jun 2021 10:03:01 +0100 [thread overview]
Message-ID: <DF8B350C-0823-4175-AA10-574E3DF190AB@ipfire.org> (raw)
In-Reply-To: <8199c175-3834-613b-e25b-bee7891a5708@posteo.de>
[-- Attachment #1: Type: text/plain, Size: 29902 bytes --]
Hello,
> On 9 Jun 2021, at 07:14, Holger Sunke <holger.sunke(a)posteo.de> wrote:
>
> Hello Michael,
>
> the node exporter does not have a daemon mode.
> I could alternatively pip the output into a log file:
>
> loadproc /usr/bin/node_exporter $OPTIONS >> /var/log/node_exporter.log 2>&1 &
Hmm, so there are two problems here:
* loadproc shows [ OK ] or [ ERROR ] so that the user knows if the program was started successfully. That is now being thrown away.
* Anything useful that node_exporter would print is also being thrown away
This seems to become a common thing that they remove the fork mode, maybe we need a special version of loadproc() that can handle that.
> Should I add a third patch to do my fixes or adjust patch 1 & 2 each?
Let’s work on Go first and get that merged and then come back to this one.
We need to have a solution first and then implement it.
-Michael
> Kind regards
>
> Holger
>
>
> Am 08.06.21 um 18:56 schrieb Michael Tremer:
>> Hello,
>> This looks quite good, too.
>> Just a minor detail below...
>>> On 6 Jun 2021, at 18:48, Holger Sunke <holger.sunke(a)posteo.de> wrote:
>>>
>>> ---
>>> config/node_exporter/node_exporter_options | 203 +++++++++++++++++++++
>>> config/rootfiles/packages/node_exporter | 3 +
>>> lfs/node_exporter | 94 ++++++++++
>>> make.sh | 1 +
>>> src/initscripts/packages/node_exporter | 42 +++++
>>> src/paks/node_exporter/install.sh | 31 ++++
>>> src/paks/node_exporter/uninstall.sh | 30 +++
>>> src/paks/node_exporter/update.sh | 27 +++
>>> 8 files changed, 431 insertions(+)
>>> create mode 100644 config/node_exporter/node_exporter_options
>>> create mode 100644 config/rootfiles/packages/node_exporter
>>> create mode 100644 lfs/node_exporter
>>> create mode 100644 src/initscripts/packages/node_exporter
>>> create mode 100644 src/paks/node_exporter/install.sh
>>> create mode 100644 src/paks/node_exporter/uninstall.sh
>>> create mode 100644 src/paks/node_exporter/update.sh
>>>
>>> diff --git a/config/node_exporter/node_exporter_options b/config/node_exporter/node_exporter_options
>>> new file mode 100644
>>> index 000000000..f614b1102
>>> --- /dev/null
>>> +++ b/config/node_exporter/node_exporter_options
>>> @@ -0,0 +1,203 @@
>>> +# Customize node_exporter startup command line flags by editing OPTIONS below:
>>> +
>>> +export OPTIONS="--web.listen-address=:9100"
>>> +
>>> +#Flags:
>>> +# -h, --help Show context-sensitive help (also try
>>> +# --help-long and --help-man).
>>> +# --collector.bcache.priorityStats
>>> +# Expose expensive priority stats.
>>> +# --collector.cpu.info Enables metric cpu_info
>>> +# --collector.cpu.info.flags-include=COLLECTOR.CPU.INFO.FLAGS-INCLUDE
>>> +# Filter the `flags` field in cpuInfo with a
>>> +# value that must be a regular expression
>>> +# --collector.cpu.info.bugs-include=COLLECTOR.CPU.INFO.BUGS-INCLUDE
>>> +# Filter the `bugs` field in cpuInfo with a value
>>> +# that must be a regular expression
>>> +# --collector.diskstats.ignored-devices="^(ram|loop|fd|(h|s|v|xv)d[a-z]|nvme\\d+n\\d+p)\\d+$"
>>> +# Regexp of devices to ignore for diskstats.
>>> +# --collector.filesystem.ignored-mount-points="^/(dev|proc|sys|var/lib/docker/.+)($|/)"
>>> +# Regexp of mount points to ignore for filesystem
>>> +# collector.
>>> +# --collector.filesystem.ignored-fs-types="^(autofs|binfmt_misc|bpf|cgroup2?|configfs|debugfs|devpts|devtmpfs|fusectl|hugetlbfs|iso9660|mqueue|nsfs|overlay|proc|procfs|pstore|rpc_pipefs|securityfs|selinuxfs|squashfs|sysfs|tracefs)$"
>>> +# Regexp of filesystem types to ignore for
>>> +# filesystem collector.
>>> +# --collector.ipvs.backend-labels="local_address,local_port,remote_address,remote_port,proto,local_mark"
>>> +# Comma separated list for IPVS backend stats
>>> +# labels.
>>> +# --collector.netclass.ignored-devices="^$"
>>> +# Regexp of net devices to ignore for netclass
>>> +# collector.
>>> +# --collector.netdev.device-include=COLLECTOR.NETDEV.DEVICE-INCLUDE
>>> +# Regexp of net devices to include (mutually
>>> +# exclusive to device-exclude).
>>> +# --collector.netdev.device-exclude=COLLECTOR.NETDEV.DEVICE-EXCLUDE
>>> +# Regexp of net devices to exclude (mutually
>>> +# exclusive to device-include).
>>> +# --collector.netstat.fields="^(.*_(InErrors|InErrs)|Ip_Forwarding|Ip(6|Ext)_(InOctets|OutOctets)|Icmp6?_(InMsgs|OutMsgs)|TcpExt_(Listen.*|Syncookies.*|TCPSynRetrans)|Tcp_(ActiveOpens|InSegs|OutSegs|OutRsts|PassiveOpens|RetransSegs|CurrEstab)|Udp6?_(InDatagrams|OutDatagrams|NoPorts|RcvbufErrors|SndbufErrors))$"
>>> +# Regexp of fields to return for netstat
>>> +# collector.
>>> +# --collector.ntp.server="127.0.0.1"
>>> +# NTP server to use for ntp collector
>>> +# --collector.ntp.protocol-version=4
>>> +# NTP protocol version
>>> +# --collector.ntp.server-is-local
>>> +# Certify that collector.ntp.server address is
>>> +# not a public ntp server
>>> +# --collector.ntp.ip-ttl=1 IP TTL to use while sending NTP query
>>> +# --collector.ntp.max-distance=3.46608s
>>> +# Max accumulated distance to the root
>>> +# --collector.ntp.local-offset-tolerance=1ms
>>> +# Offset between local clock and local ntpd time
>>> +# to tolerate
>>> +# --path.procfs="/proc" procfs mountpoint.
>>> +# --path.sysfs="/sys" sysfs mountpoint.
>>> +# --path.rootfs="/" rootfs mountpoint.
>>> +# --collector.perf.cpus="" List of CPUs from which perf metrics should be
>>> +# collected
>>> +# --collector.perf.tracepoint=COLLECTOR.PERF.TRACEPOINT ...
>>> +# perf tracepoint that should be collected
>>> +# --collector.powersupply.ignored-supplies="^$"
>>> +# Regexp of power supplies to ignore for
>>> +# powersupplyclass collector.
>>> +# --collector.qdisc.fixtures=""
>>> +# test fixtures to use for qdisc collector
>>> +# end-to-end testing
>>> +# --collector.runit.servicedir="/etc/service"
>>> +# Path to runit service directory.
>>> +# --collector.supervisord.url="http://localhost:9001/RPC2"
>>> +# XML RPC endpoint.
>>> +# --collector.systemd.unit-include=".+"
>>> +# Regexp of systemd units to include. Units must
>>> +# both match include and not match exclude to be
>>> +# included.
>>> +# --collector.systemd.unit-exclude=".+\\.(automount|device|mount|scope|slice)"
>>> +# Regexp of systemd units to exclude. Units must
>>> +# both match include and not match exclude to be
>>> +# included.
>>> +# --collector.systemd.enable-task-metrics
>>> +# Enables service unit tasks metrics
>>> +# unit_tasks_current and unit_tasks_max
>>> +# --collector.systemd.enable-restarts-metrics
>>> +# Enables service unit metric
>>> +# service_restart_total
>>> +# --collector.systemd.enable-start-time-metrics
>>> +# Enables service unit metric
>>> +# unit_start_time_seconds
>>> +# --collector.textfile.directory=""
>>> +# Directory to read text files with metrics from.
>>> +# --collector.vmstat.fields="^(oom_kill|pgpg|pswp|pg.*fault).*"
>>> +# Regexp of fields to return for vmstat
>>> +# collector.
>>> +# --collector.wifi.fixtures=""
>>> +# test fixtures to use for wifi collector metrics
>>> +# --collector.arp Enable the arp collector (default: enabled).
>>> +# --collector.bcache Enable the bcache collector (default: enabled).
>>> +# --collector.bonding Enable the bonding collector (default:
>>> +# enabled).
>>> +# --collector.btrfs Enable the btrfs collector (default: enabled).
>>> +# --collector.buddyinfo Enable the buddyinfo collector (default:
>>> +# disabled).
>>> +# --collector.conntrack Enable the conntrack collector (default:
>>> +# enabled).
>>> +# --collector.cpu Enable the cpu collector (default: enabled).
>>> +# --collector.cpufreq Enable the cpufreq collector (default:
>>> +# enabled).
>>> +# --collector.diskstats Enable the diskstats collector (default:
>>> +# enabled).
>>> +# --collector.drbd Enable the drbd collector (default: disabled).
>>> +# --collector.edac Enable the edac collector (default: enabled).
>>> +# --collector.entropy Enable the entropy collector (default:
>>> +# enabled).
>>> +# --collector.fibrechannel Enable the fibrechannel collector (default:
>>> +# enabled).
>>> +# --collector.filefd Enable the filefd collector (default: enabled).
>>> +# --collector.filesystem Enable the filesystem collector (default:
>>> +# enabled).
>>> +# --collector.hwmon Enable the hwmon collector (default: enabled).
>>> +# --collector.infiniband Enable the infiniband collector (default:
>>> +# enabled).
>>> +# --collector.interrupts Enable the interrupts collector (default:
>>> +# disabled).
>>> +# --collector.ipvs Enable the ipvs collector (default: enabled).
>>> +# --collector.ksmd Enable the ksmd collector (default: disabled).
>>> +# --collector.loadavg Enable the loadavg collector (default:
>>> +# enabled).
>>> +# --collector.logind Enable the logind collector (default:
>>> +# disabled).
>>> +# --collector.mdadm Enable the mdadm collector (default: enabled).
>>> +# --collector.meminfo Enable the meminfo collector (default:
>>> +# enabled).
>>> +# --collector.meminfo_numa Enable the meminfo_numa collector (default:
>>> +# disabled).
>>> +# --collector.mountstats Enable the mountstats collector (default:
>>> +# disabled).
>>> +# --collector.netclass Enable the netclass collector (default:
>>> +# enabled).
>>> +# --collector.netdev Enable the netdev collector (default: enabled).
>>> +# --collector.netstat Enable the netstat collector (default:
>>> +# enabled).
>>> +# --collector.network_route Enable the network_route collector (default:
>>> +# disabled).
>>> +# --collector.nfs Enable the nfs collector (default: enabled).
>>> +# --collector.nfsd Enable the nfsd collector (default: enabled).
>>> +# --collector.ntp Enable the ntp collector (default: disabled).
>>> +# --collector.perf Enable the perf collector (default: disabled).
>>> +# --collector.powersupplyclass
>>> +# Enable the powersupplyclass collector (default:
>>> +# enabled).
>>> +# --collector.pressure Enable the pressure collector (default:
>>> +# enabled).
>>> +# --collector.processes Enable the processes collector (default:
>>> +# disabled).
>>> +# --collector.qdisc Enable the qdisc collector (default: disabled).
>>> +# --collector.rapl Enable the rapl collector (default: enabled).
>>> +# --collector.runit Enable the runit collector (default: disabled).
>>> +# --collector.schedstat Enable the schedstat collector (default:
>>> +# enabled).
>>> +# --collector.sockstat Enable the sockstat collector (default:
>>> +# enabled).
>>> +# --collector.softnet Enable the softnet collector (default:
>>> +# enabled).
>>> +# --collector.stat Enable the stat collector (default: enabled).
>>> +# --collector.supervisord Enable the supervisord collector (default:
>>> +# disabled).
>>> +# --collector.systemd Enable the systemd collector (default:
>>> +# disabled).
>>> +# --collector.tcpstat Enable the tcpstat collector (default:
>>> +# disabled).
>>> +# --collector.textfile Enable the textfile collector (default:
>>> +# enabled).
>>> +# --collector.thermal_zone Enable the thermal_zone collector (default:
>>> +# enabled).
>>> +# --collector.time Enable the time collector (default: enabled).
>>> +# --collector.timex Enable the timex collector (default: enabled).
>>> +# --collector.udp_queues Enable the udp_queues collector (default:
>>> +# enabled).
>>> +# --collector.uname Enable the uname collector (default: enabled).
>>> +# --collector.vmstat Enable the vmstat collector (default: enabled).
>>> +# --collector.wifi Enable the wifi collector (default: disabled).
>>> +# --collector.xfs Enable the xfs collector (default: enabled).
>>> +# --collector.zfs Enable the zfs collector (default: enabled).
>>> +# --collector.zoneinfo Enable the zoneinfo collector (default:
>>> +# disabled).
>>> +# --web.listen-address=":9100"
>>> +# Address on which to expose metrics and web
>>> +# interface.
>>> +# --web.telemetry-path="/metrics"
>>> +# Path under which to expose metrics.
>>> +# --web.disable-exporter-metrics
>>> +# Exclude metrics about the exporter itself
>>> +# (promhttp_*, process_*, go_*).
>>> +# --web.max-requests=40 Maximum number of parallel scrape requests. Use
>>> +# 0 to disable.
>>> +# --collector.disable-defaults
>>> +# Set all collectors to disabled by default.
>>> +# --web.config="" [EXPERIMENTAL] Path to config yaml file that
>>> +# can enable TLS or authentication.
>>> +# --log.level=info Only log messages with the given severity or
>>> +# above. One of: [debug, info, warn, error]
>>> +# --log.format=logfmt Output format of log messages. One of: [logfmt,
>>> +# json]
>>> +# --version Show application version.
>>> +
>>> diff --git a/config/rootfiles/packages/node_exporter b/config/rootfiles/packages/node_exporter
>>> new file mode 100644
>>> index 000000000..994c8365b
>>> --- /dev/null
>>> +++ b/config/rootfiles/packages/node_exporter
>>> @@ -0,0 +1,3 @@
>>> +usr/bin/node_exporter
>>> +etc/node_exporter_options
>>> +etc/rc.d/init.d/node_exporter
>>> diff --git a/lfs/node_exporter b/lfs/node_exporter
>>> new file mode 100644
>>> index 000000000..942816754
>>> --- /dev/null
>>> +++ b/lfs/node_exporter
>>> @@ -0,0 +1,94 @@
>>> +##############################################################################
>>> +# #
>>> +# IPFire.org - A linux based firewall #
>>> +# Copyright (C) 2007 Michael Tremer & Christian Schmidt #
>>> +# #
>>> +# This program is free software: you can redistribute it and/or modify #
>>> +# it under the terms of the GNU General Public License as published by #
>>> +# the Free Software Foundation, either version 3 of the License, or #
>>> +# (at your option) any later version. #
>>> +# #
>>> +# This program is distributed in the hope that it will be useful, #
>>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>> +# GNU General Public License for more details. #
>>> +# #
>>> +# You should have received a copy of the GNU General Public License #
>>> +# along with this program. If not, see <http://www.gnu.org/licenses/>. #
>>> +# #
>>> +###############################################################################
>>> +
>>> +###############################################################################
>>> +# Definitions
>>> +###############################################################################
>>> +
>>> +include Config
>>> +
>>> +VER = 1.1.2
>>> +
>>> +THISAPP = node_exporter-$(VER)
>>> +DL_FILE = $(THISAPP).tar.gz
>>> +DL_FROM = https://github.com/prometheus/node_exporter/archive/v$(VER)/
>>> +DIR_APP = $(DIR_SRC)/$(THISAPP)
>>> +TARGET = $(DIR_INFO)/$(THISAPP)
>>> +SUP_ARCH = x86_64 i586 aarch64 armv5tel
>>> +PROG = node_exporter
>>> +PAK_VER = 1
>>> +
>>> +DEPS = ""
>>> +
>>> +###############################################################################
>>> +# Top-level Rules
>>> +###############################################################################
>>> +
>>> +objects = $(DL_FILE)
>>> +
>>> +$(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>>> +
>>> +$(DL_FILE)_MD5 = 33c2be846dbd502f9c0efab149a8cbc5
>>> +
>>> +install : $(TARGET)
>>> +check : $(patsubst %,$(DIR_CHK)/%,$(objects))
>>> +
>>> +download : $(patsubst %,$(DIR_DL)/%,$(objects))
>>> +
>>> +md5 : $(subst %,%_MD5,$(objects))
>>> +
>>> +dist :
>>> + @$(PAK)
>>> +
>>> +###############################################################################
>>> +# Downloading, checking, md5sum
>>> +###############################################################################
>>> +
>>> +$(patsubst %,$(DIR_CHK)/%,$(objects)) :
>>> + @$(CHECK)
>>> +
>>> +$(patsubst %,$(DIR_DL)/%,$(objects)) :
>>> + @$(LOAD)
>>> +
>>> +$(subst %,%_MD5,$(objects)) :
>>> + @$(MD5)
>>> +
>>> +###############################################################################
>>> +# Installation Details
>>> +###############################################################################
>>> +
>>> +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
>>> + @$(PREBUILD)
>>> + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE)
>>> + cd $(DIR_APP) && make build $(MAKETUNING) $(EXTRA_MAKE)
>>> +
>>> + # install compiled binary
>>> + cd $(DIR_APP) && cp node_exporter /usr/bin
>>> +
>>> + # install configuration file
>>> + install -v -m 644 $(DIR_SRC)/config/node_exporter/node_exporter_options \
>>> + /etc/node_exporter_options
>>> +
>>> + # Install initscript
>>> + $(call INSTALL_INITSCRIPT,node_exporter)
>>> +
>>> + @rm -rf $(DIR_APP)
>>> + @$(POSTBUILD)
>>> +
>>> diff --git a/make.sh b/make.sh
>>> index 4af0081e9..671f15558 100755
>>> --- a/make.sh
>>> +++ b/make.sh
>>> @@ -1632,6 +1632,7 @@ buildipfire() {
>>> lfsmake2 socat
>>> lfsmake2 libcdada
>>> lfsmake2 pmacct
>>> + lfsmake2 node_exporter
>>> }
>>>
>>> buildinstaller() {
>>> diff --git a/src/initscripts/packages/node_exporter b/src/initscripts/packages/node_exporter
>>> new file mode 100644
>>> index 000000000..b9cbc6ab9
>>> --- /dev/null
>>> +++ b/src/initscripts/packages/node_exporter
>>> @@ -0,0 +1,42 @@
>>> +#!/bin/sh
>>> +########################################################################
>>> +# Begin $rc_base/init.d/
>>> +#
>>> +# Description : Prometheus Node Exporter daemon
>>> +#
>>> +########################################################################
>>> +
>>> +. /etc/sysconfig/rc
>>> +. ${rc_functions}
>>> +
>>> +# read configurable OPTIONS
>>> +. /etc/node_exporter_options
>>> +
>>> +case "${1}" in
>>> + start)
>>> + boot_mesg "Starting..."
>> The “Starting…” line normally has the name of the program.
>>> + loadproc /usr/bin/node_exporter $OPTIONS > /dev/null 2>&1 &
>> You are throwing away the output of loadproc as well as any potential error messages.
>> Does this program have a way to fork itself into the background?
>>> + ;;
>>> +
>>> + stop)
>>> + boot_mesg "Stopping..."
>> Same here.
>>> + killproc /usr/bin/node_exporter
>>> + ;;
>>> +
>>> + restart)
>>> + ${0} stop
>>> + sleep 1
>>> + ${0} start
>>> + ;;
>>> +
>>> + status)
>>> + statusproc /usr/bin/node_exporter
>>> + ;;
>>> +
>>> + *)
>>> + echo "Usage: ${0} {start|stop|restart|status}"
>>> + exit 1
>>> + ;;
>>> +esac
>>> +
>>> +# End $rc_base/init.d/
>>> diff --git a/src/paks/node_exporter/install.sh b/src/paks/node_exporter/install.sh
>>> new file mode 100644
>>> index 000000000..e9272d7cb
>>> --- /dev/null
>>> +++ b/src/paks/node_exporter/install.sh
>>> @@ -0,0 +1,31 @@
>>> +#!/bin/bash
>>> +############################################################################
>>> +# #
>>> +# This file is part of the IPFire Firewall. #
>>> +# #
>>> +# IPFire is free software; you can redistribute it and/or modify #
>>> +# it under the terms of the GNU General Public License as published by #
>>> +# the Free Software Foundation; either version 2 of the License, or #
>>> +# (at your option) any later version. #
>>> +# #
>>> +# IPFire is distributed in the hope that it will be useful, #
>>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>> +# GNU General Public License for more details. #
>>> +# #
>>> +# You should have received a copy of the GNU General Public License #
>>> +# along with IPFire; if not, write to the Free Software #
>>> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA #
>>> +# #
>>> +# Copyright (C) 2007 IPFire-Team <info(a)ipfire.org>. #
>>> +# #
>>> +############################################################################
>>> +#
>>> +. /opt/pakfire/lib/functions.sh
>>> +extract_files
>>> +restore_backup ${NAME}
>>> +start_service --background ${NAME}
>>> +
>>> +ln -svf ../init.d/node_exporter /etc/rc.d/rc0.d/K30node_exporter
>>> +ln -svf ../init.d/node_exporter /etc/rc.d/rc3.d/S40node_exporter
>>> +ln -svf ../init.d/node_exporter /etc/rc.d/rc6.d/K30node_exporter
>>> diff --git a/src/paks/node_exporter/uninstall.sh b/src/paks/node_exporter/uninstall.sh
>>> new file mode 100644
>>> index 000000000..710baf8b4
>>> --- /dev/null
>>> +++ b/src/paks/node_exporter/uninstall.sh
>>> @@ -0,0 +1,30 @@
>>> +#!/bin/bash
>>> +############################################################################
>>> +# #
>>> +# This file is part of the IPFire Firewall. #
>>> +# #
>>> +# IPFire is free software; you can redistribute it and/or modify #
>>> +# it under the terms of the GNU General Public License as published by #
>>> +# the Free Software Foundation; either version 2 of the License, or #
>>> +# (at your option) any later version. #
>>> +# #
>>> +# IPFire is distributed in the hope that it will be useful, #
>>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>> +# GNU General Public License for more details. #
>>> +# #
>>> +# You should have received a copy of the GNU General Public License #
>>> +# along with IPFire; if not, write to the Free Software #
>>> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA #
>>> +# #
>>> +# Copyright (C) 2007 IPFire-Team <info(a)ipfire.org>. #
>>> +# #
>>> +############################################################################
>>> +#
>>> +. /opt/pakfire/lib/functions.sh
>>> +/etc/init.d/node_exporter stop
>>> +make_backup ${NAME}
>>> +remove_files
>>> +
>>> +rm -rfv /etc/rc.d/rc*.d/*node_exporter
>>> +
>>> diff --git a/src/paks/node_exporter/update.sh b/src/paks/node_exporter/update.sh
>>> new file mode 100644
>>> index 000000000..99776659c
>>> --- /dev/null
>>> +++ b/src/paks/node_exporter/update.sh
>>> @@ -0,0 +1,27 @@
>>> +#!/bin/bash
>>> +############################################################################
>>> +# #
>>> +# This file is part of the IPFire Firewall. #
>>> +# #
>>> +# IPFire is free software; you can redistribute it and/or modify #
>>> +# it under the terms of the GNU General Public License as published by #
>>> +# the Free Software Foundation; either version 2 of the License, or #
>>> +# (at your option) any later version. #
>>> +# #
>>> +# IPFire is distributed in the hope that it will be useful, #
>>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of #
>>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
>>> +# GNU General Public License for more details. #
>>> +# #
>>> +# You should have received a copy of the GNU General Public License #
>>> +# along with IPFire; if not, write to the Free Software #
>>> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA #
>>> +# #
>>> +# Copyright (C) 2007-2020 IPFire-Team <info(a)ipfire.org>. #
>>> +# #
>>> +############################################################################
>>> +#
>>> +. /opt/pakfire/lib/functions.sh
>>> +extract_backup_includes
>>> +./uninstall.sh
>>> +./install.sh
>>> --
>>> 2.30.2
>>>
next prev parent reply other threads:[~2021-06-10 9:03 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-06 17:48 [PATCH 0/2] Reworked patches introducing node_exporter on master branch Holger Sunke
2021-06-06 17:48 ` [PATCH 1/2] Added x86_64 i586 aarch64 armv5tel support for GO language required for node_exporter compilation Holger Sunke
2021-06-08 16:54 ` Michael Tremer
2021-06-09 6:00 ` Holger Sunke
2021-06-10 8:57 ` Michael Tremer
2021-07-15 19:32 ` Holger Sunke
2021-07-19 11:11 ` Michael Tremer
2021-07-21 17:55 ` Holger Sunke
2021-07-21 18:15 ` Michael Tremer
2021-07-24 19:13 ` Holger Sunke
2021-07-26 14:09 ` Michael Tremer
2021-06-06 17:48 ` [PATCH 2/2] Added new node_exporter package Holger Sunke
2021-06-08 16:56 ` Michael Tremer
2021-06-09 6:14 ` Holger Sunke
2021-06-10 9:03 ` Michael Tremer [this message]
-- strict thread matches above, loose matches on Subject: below --
2021-05-06 19:46 [PATCH 0/2] Added new Package node_exporter Holger Sunke
2021-05-06 19:46 ` [PATCH 2/2] Added new node_exporter package Holger Sunke
2021-05-06 20:58 ` Adolf Belka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DF8B350C-0823-4175-AA10-574E3DF190AB@ipfire.org \
--to=michael.tremer@ipfire.org \
--cc=development@lists.ipfire.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox