Re: [PATCH] lvm2: Update to version 2.03.21

[Michael Tremer <michael.tremer@ipfire.org>]

[-- Attachment #1: Type: text/plain, Size: 23903 bytes --]

This is a service that caches any meta information about the LVM arrays.

At some point, we decided to run it by default, because it makes any block operations a little bit faster.

The change log states that it has been removed, so we simply need to drop this line. I do not think that this will cause any other changes for us.

-Michael

> On 9 May 2023, at 08:51, Arne Fitzenreiter <arne_f(a)ipfire.org> wrote:
> 
> This patch remove lvmetad but there is still an initskript that try to start it.
> I don't know what this does but it give an error at boot.
> 
> Arne
> 
> 
> Am 2023-05-02 19:53, schrieb Adolf Belka:
>> - Update from version 2.02.188 to 2.03.21
>> - Update of rootfile
>> - Changelog
>>    version 2.03.21 - 21st April 2023
>>  Fix activation of vdo-pool for with 0 length headers (converted pools).
>>  Avoid printing internal init messages when creation integration devices.
>>  Allow (write)cache over raid+integrity LV.
>>    version 2.03.20 - 21st March 2023
>>  Fix segfault if using -S|--select with log/report_command_log=1 setting.
>>  Configure now fails when requested lvmlockd dependencies are missing.
>>  Add some configure Gentoo enhancements for static builds.
>>    version 2.03.19 - 21st February 2023
>>  Configure supports --with-systemd-run executed from udev rules.
>>  Enhancement for build with MuslC systemd and non-bash system shells (dash).
>>  Do not reset SYSTEMD_READY variable in udev for PVs on MD and loop devices.
>>  Ensure udev is processing origin LV before its thick snapshots LVs.
>>  Fix and improve runtime memory size detection for VDO volumes.
>>    version 2.03.18 - 22nd December 2022
>>  Fix issues reported by coverity scan.
>>  Fix warning for thin pool overprovisioning on lvextend (2.03.17).
>>  Add support for writecache metadata_only and pause_writeback settings.
>>  Fix missing error messages in lvmdbusd.
>>    Version 2.03.17 - 10th November 2022
>>  Add new options (--fs, --fsmode) for FS handling when resizing LVs.
>>  Fix 'lvremove -S|--select LV' to not also remove its historical LV
>> right away.
>>  Fix lv_active field type to binary so --select and --binary applies properly.
>>  Switch to use mallinfo2 and use it only with glibc.
>>  Error out in lvm shell if using a cmd argument not supported in the shell.
>>  Fix lvm shell's lastlog command to report previous pre-command failures.
>>  Extend VDO and VDOPOOL without flushing and locking fs.
>>  Add --valuesonly option to lvmconfig to print only values without keys.
>>  Updates configure with recent autoconf tooling.
>>  Fix lvconvert --test --type vdo-pool execution.
>>  Add json_std output format for more JSON standard compliant version
>> of output.
>>  Fix vdo_slab_size_mb value for converted VDO volume.
>>  Fix many corner cases in device_id, including handling of S/N duplicates.
>>  Fix various issues in lvmdbusd.
>>    Version 2.03.16 - 18th May 2022
>>  Fix segfault when handling selection with historical LVs.
>>  Add support --vdosettings with lvcreate, lvconvert, lvchange.
>>  Filtering multipath devices respects blacklist setting from multipath
>>  configuration.
>>  lvmdevices support for removing by device id using --deviceidtype and
>>  --deldev.
>>  Display writecache block size with lvs -o writecache_block_size.
>>  Improve cachesettings description in man lvmcache.
>>  Fix lossing of delete message on thin-pool extension.
>>    Version 2.03.15 - 07th February 2022
>>  Remove service based autoactivation. global/event_activation = 0 is NOOP.
>>  Improve support for metadata profiles for --type writecache.
>>  Use cache or active DM device when available with new kernels.
>>  Introduce function to utilize UUIDs from DM_DEVICE_LIST.
>>  Increase some hash table size to better support large device sets.
>>    Version 2.03.14 - 20th October 2021
>>  Device scanning is skipping directories on different filesystems.
>>  Print info message with too many or too large archived files.
>>  Reduce metadata readings during scanning phase.
>>  Optimize computation of crc32 check sum with multiple PVs.
>>  Enhance recover path on cache creation failure.
>>  Filter out unsupported MQ/SMQ cache policy setting.
>>  Fix memleak in mpath filter.
>>  Support newer location for VDO statistics.
>>  Add support for VDO async-unsafe write policy.
>>  Improve lvm_import_vdo script.
>>  Support VDO LV with lvcreate -ky.
>>  Fix lvconvert for VDO LV bigger then 2T.
>>  Create VDO LVs automatically without zeroing.
>>  Rename vdoimport to lvm_import_vdo.
>>    Version 2.03.13 - 11th August 2021
>>  Changes in udev support:
>>  - obtain_device_list_from_udev defaults to 0.
>>  - see devices/external_device_info_source,
>>    devices/obtain_device_list_from_udev, and devices/multipath_wwids_file help
>>    in lvm.conf
>>  Fix devices file handling of loop with deleted backing file.
>>  Fix devices file handling of scsi_debug WWIDs.
>>  Fix many static analysis issues.
>>  Support --poolmetadataspare with vgsplit and vgmerge.
>>  Fix detection of active components of external origin volume.
>>  Add vdoimport tool to support conversion of VDO volumes.
>>  Support configurable allocation/vdo_pool_header_size.
>>  Fix handling of lvconvert --type vdo-pool --virtualsize.
>>  Simplified handling of archive() and backup() internal calls.
>>  Add 'idm' locking type for IDM lock manager.
>>  Fix load of kvdo target when it is not present in memory (2.03.12).
>>    Version 2.03.12 - 07th May 2021
>>  Allow attaching cache to thin data volume.
>>  Fix memleak when generating list of outdated pvs.
>>  Better hyphenation usage in man pages.
>>  Replace use of deprecated security_context_t with char*.
>>  Configure supports AIO_LIBS and AIO_CFLAGS.
>>  Improve build process for static builds.
>>  New --setautoactivation option to modify LV or VG auto activation.
>>  New metadata based autoactivation property for LVs and VGs.
>>  Improve signal handling with lvmpolld.
>>  Signal handler can interrupt command also for SIGTERM.
>>  Lvreduce --yes support.
>>  Add configure option --with/out-symvers for non-glibc builds.
>>  Report error when the filesystem is missing on fsadm resized volume.
>>  Handle better blockdev with --getsize64 support for fsadm.
>>  Do not include editline/history.h when using editline library.
>>  Support error and zero segtype for thin-pool data for testing.
>>  Support mixed extension for striped, error and zero segtypes.
>>  Support resize also for stacked virtual volumes.
>>  Skip dm-zero devices just like with dm-error target.
>>  Reduce ioctl() calls when checking target status.
>>  Merge polling does not fail, when LV is found to be already merged.
>>  Poll volumes with at least 100ms delays.
>>  Do not flush dm cache when cached LV is going to be removed.
>>  New lvmlockctl_kill_command configuration option.
>>  Support interruption while waiting on device close before deactivation.
>>  Flush thin-pool messages before removing more thin volumes.
>>  Improve hash function with less collisions and make it faster.
>>  Reduce ioctl count when deactivating volumes.
>>  Reduce number of metadata parsing.
>>  Enhance performance of lvremove and vgremove commands.
>>  Support interruption when taking archive and backup.
>>  Accelerate large lvremoves.
>>  Speedup search for cached device nodes.
>>  Speedup command initialization.
>>  Add devices file feature, off by default for now.
>>  Support extension of writecached volumes.
>>  Fix problem with unbound variable usage within fsadm.
>>  Fix IMSM MD RAID detection on 4k devices.
>>  Check for presence of VDO target before starting any conversion.
>>  Support metatadata profiles with volume VDO pool conversions.
>>  Support -Zn for conversion of already formated VDO pools.
>>  Avoid removing LVs on error path of lvconvert during creation volumes.
>>  Fix crashing lvdisplay when thin volume was waiting for merge.
>>  Support option --errorwhenfull when converting volume to thin-pool.
>>  Improve thin-performance profile support conversion to thin-pool.
>>  Add workaround to avoid read of internal 'converted' devices.
>>  Prohibit merging snapshot into the read-only thick snapshot origin.
>>  Restore support for flipping rw/r permissions for thin snapshot origin.
>>  Support resize of cached volumes.
>>  Disable autoactivation with global/event_activation=0.
>>  Check if lvcreate passes read_only_volume_list with tags and skips zeroing.
>>  Allocation prints better error when metadata cannot fit on a single PV.
>>  Pvmove can better resolve full thin-pool tree move.
>>  Limit pool metadata spare to 16GiB.
>>  Improves conversion and allocation of pool metadata.
>>  Support thin pool metadata 15.88GiB, adds 64MiB, thin_pool_crop_metadata=0.
>>  Enhance lvdisplay to report raid available/partial.
>>  Support online rename of VDO pools.
>>  Improve removal of pmspare when last pool is removed.
>>  Fix problem with wiping of converted LVs.
>>  Fix memleak in scanning  (2.03.11).
>>  Fix corner case allocation for thin-pools.
>>    Version 2.03.11 - 08th January 2021
>>  Fix pvck handling MDA at offset different from 4096.
>>  Partial or degraded activation of writecache is not allowed.
>>  Enhance error handling for fsadm and handle correct fsck result.
>>  Dmeventd lvm plugin ignores higher reserved_stack lvm.conf values.
>>  Support using BLKZEROOUT for clearing devices.
>>  Support interruption when wipping LVs.
>>  Support interruption for bcache waiting.
>>  Fix bcache when device has too many failing writes.
>>  Fix bcache waiting for IO completion with failing disks.
>>  Configure use own python path name order to prefer using python3.
>>  Add configure --enable-editline support as an alternative to readline.
>>  Enhance reporting and error handling when creating thin volumes.
>>  Enable vgsplit for VDO volumes.
>>  Lvextend of vdo pool volumes ensure at least 1 new VDO slab is added.
>>  Use revert_lv() on reload error path after vg_revert().
>>  Configure --with-integrity enabled.
>>  Restore lost signal blocking while VG lock is held.
>>  Improve estimation of needed extents when creating thin-pool.
>>  Use extra 1% when resizing thin-pool metadata LV with --use-policy.
>>  Enhance --use-policy percentage rounding.
>>  Configure --with-vdo and --with-writecache as internal segments.
>>  Improving VDO man page examples.
>>  Allow pvmove of writecache origin.
>>  Report integrity fields.
>>  Integrity volumes defaults to journal mode.
>>  Switch code base to use flexible array syntax.
>>  Fix 64bit math when calculation cachevol size.
>>  Preserve uint32_t for seqno handling.
>>  Switch from mmap to plain read when loading regular files.
>>  Update lvmvdo man page and better explain DISCARD usage.
>>    Version 2.03.10 - 09th August 2020
>>  Add writecache and integrity support to lvmdbusd.
>>  Generate unique cachevol name when default required from lvcreate.
>>  Converting RAID1 volume to one with same number of legs now succeeds with a
>>  warning.
>>  Fix conversion to raid from striped lagging type.
>>  Fix conversion to 'mirrored' mirror log with larger regionsize.
>>  Zero pool metadata on allocation (disable with allocation/zero_metadata=0).
>>  Failure in zeroing or wiping will fail command (bypass with -Zn, -Wn).
>>  Add lvcreate of new cache or writecache lv with single command.
>>  Fix running out of free buffers for async writing for larger writes.
>>  Add integrity with raid capability.
>>  Fix support for lvconvert --repair used by foreign apps (i.e. Docker).
>>    Version 2.03.09 - 26th March 2020
>>  Fix formatting of vdopool (vdo_slab_size_mb was smaller by 2 bits).
>>  Fix showing of a dm kernel error when uncaching a volume with cachevol.
>>    Version 2.03.08 - 11th February 2020
>>  Prevent problematic snapshots of writecache volumes.
>>  Add error handling for failing allocation in _reserve_area().
>>  Fix memleak in syncing of internal cache.
>>  Fix pvck dump_current_text memleak.
>>  Fix lvmlockd result code on error path for _query_lock_lv().
>>  Update pvck man page and help output.
>>  Reject invalid writecache high/low_watermark setting.
>>  Report writecache status.
>>  Accept more output lines from vdo_format.
>>  Prohibit reshaping of stacked raid LVs.
>>  Avoid running cache input arg validation when creating vdo pool.
>>  Prevent raid reshaping of stacked volumes.
>>  Added VDO lvmdbusd methods for enable/disable compression & dedupe.
>>  Added VDO lvmdbusd method for converting LV to VDO pool.
>>    Version 2.03.07 - 30th November 2019
>>  Subcommand in vgck for repairing headers and metadata.
>>  Ensure minimum required region size on striped RaidLV creation.
>>  Fix resize of thin-pool with data and metadata of different segtype.
>>  Improve mirror type leg splitting.
>>  Improve error path handling in daemons on shutdown.
>>  Fix activation order when removing merged snapshot.
>>  Experimental VDO support for lvmdbusd.
>>   Version 2.03.06 - 23rd October 2019
>>  Add _cpool suffix to cache-pool LV name when used by caching LV.
>>  No longer store extra UUID for cmeta and cdata cachevol layer.
>>  Enhance activation of cache devices with cachevols.
>>  Add _cvol in list of protected suffixes and start use it with DM UUID.
>>  Rename LV converted to cachevol to use _cvol suffix.
>>  Use normal LVs for wiping of cachevols.
>>  Reload cleanered cache DM only with cleaner policy.
>>  Fix cmd return when zeroing of cachevol fails.
>>  Extend lvs to show all VDO properties.
>>  Preserve VDO write policy with vdopool.
>>  Increase default vdo bio threads to 4.
>>  Continue report when cache_status fails.
>>  Add support for DM_DEVICE_GET_TARGET_VERSION into device_mapper.
>>  Fix cmirrord usage of header files from device_mapper subdir.
>>  Allow standalone activation of VDO pool just like for thin-pools.
>>  Activate thin-pool layered volume as 'read-only' device.
>>  Ignore crypto devices with UUID signature CRYPT-SUBDEV.
>>  Enhance validation for thin and cache pool conversion and swapping.
>>  Improve internal removal of cached devices.
>>  Synchronize with udev when dropping snapshot.
>>  Add missing device synchronization point before removing pvmove node.
>>  Correctly set read_ahead for LVs when pvmove is finished.
>>  Remove unsupported OPTIONS+="event_timeout" udev rule from 11-dm-lvm.rules.
>>  Prevent creating VGs with PVs with different logical block sizes.
>>  Fix metadata writes from corrupting with large physical block size.
>>    Version 2.03.05 - 15th June 2019
>>  Fix command definition for pvchange -a.
>>  Add vgck --updatemetadata command that will repair metadata problems.
>>  Improve VG reading to work if one good copy of metadata is found.
>>  Report/display/scan commands that read VGs will no longer write/repair.
>>  Move metadata repairs from VG reading to VG writing.
>>  Add config setting md_component_checks to control MD component checks.
>>  Add end of device MD component checks when dev has no udev info.
>>    Version 2.03.04 - 10th June 2019
>>  Remove unused_duplicate_devs from cmd causing segfault in dmeventd.
>>    Version 2.03.03 - 07th June 2019
>>  Report no_discard_passdown for cache LVs with lvs -o+kernel_discards.
>>  Add pvck --dump option to extract metadata.
>>  Fix signal delivery checking race in libdaemon (lvmetad).
>>  Add missing Before=shutdown.target to LVM2 services to fix shutdown ordering.
>>  Skip autoactivation for a PV when PV size does not match device size.
>>  Remove first-pvscan-initialization which should no longer be needed.
>>  Add remote refresh through lvmlockd/dlm for shared LVs after lvextend.
>>  Ignore foreign and shared PVs for pvscan online files.
>>  Add config setting to control fields in debug file and verbose output.
>>  Add command[pid] and timestamp to debug file and verbose output.
>>  Fix missing growth of _pmsmare volume when extending _tmeta volume.
>>  Automatically grow thin metadata, when thin data gets too big.
>>  Add synchronization with udev before removing cached devices.
>>  Add support for caching VDO LVs and VDOPOOL LVs.
>>  Add support for vgsplit with cached devices.
>>  Query mpath device only once per command for its state.
>>  Use device INFO instead of STATUS when checking for mpath device uuid.
>>  Change default io_memory_size from 4 to 8 MiB.
>>  Add config setting io_memory_size to set bcache size.
>>  Fix pvscan autoactivation for concurrent pvscans.
>>  Change scan_lvs default to 0 so LVs are not scanned for PVs.
>>  Thin-pool selects power-of-2 chunk size by default.
>>  Cache selects power-of-2 chunk size by default.
>>  Support reszing for VDOPoolLV and VDOLV.
>>  Improve -lXXX%VG modifier which improves cache segment estimation.
>>  Ensure migration_threshold for cache is at least 8 chunks.
>>  Restore missing man info lvcreate --zero for thin-pools.
>>  Drop misleadning comment for metadata minimum_io_size for VDO segment.
>>  Add device hints to reduce scanning.
>>  Introduce LVM_SUPPRESS_SYSLOG to suppress syslog usage by generator.
>>  Fix generator quering lvmconfig unpresent config option.
>>  Fix memleak on bcache error path code.
>>  Fix missing unlock on lvm2 dmeventd plugin error path initialization.
>>  Improve Makefile dependency tracking.
>>  Move VDO support towards V2 target (6.2) support.
>>    Version 2.03.02 - 18th December 2018
>>  Fix missing proper initialization of pv_list struct when adding pv.
>>  Fix (de)activation of RaidLVs with visible SubLVs.
>>  Prohibit mirrored 'mirror' log via lvcreate and lvconvert.
>>  Use sync io if async io_setup fails, or use_aio=0 is set in config.
>>  Fix more issues reported by coverity scan.
>>    Version 2.03.01 - 31st October 2018
>>    Version 2.03.00 - 10th October 2018
>>  Add hot fix to avoiding locking collision when monitoring thin-pools.
>>  Allow raid4 -> linear conversion request.
>>  Fix lvconvert striped/raid0/raid0_meta -> raid6 regression.
>>  Add 'lvm2-activation-generator:' prefix for kmsg messages logged by
>> generator.
>>  Add After=rbdmap.service to {lvm2-activation-net,blk-availability}.service.
>>  Reduce max concurrent aios to avoid EMFILE with many devices.
>>  Fix lvconvert conversion attempts to linear.
>>  Fix lvconvert raid0/raid0_meta -> striped regression.
>>  Fix lvconvert --splitmirror for mirror type (2.02.178).
>>  Do not pair cache policy and cache metadata format.
>>  lvconvert: reject conversions on raid1 LVs with split tracked SubLVs
>>  lvconvert: reject conversions on raid1 split tracked SubLVs
>>  Add basic creation support for VDO target.
>>  Never send any discard ioctl with test mode.
>>  Fix thin-pool alloc which needs same PV for data and metadata.
>>  Extend list of non-memlocked areas with newly linked libs.
>>  Enhance vgcfgrestore to check for active LVs in restored VG.
>>  Configure supports --disable-silent-rules for verbose builds.
>>  Fix unmonitoring of merging snapshots.
>>  Cache can uses metadata format 2 with cleaner policy.
>>  Fix check if resized PV can also fit metadata area.
>>  Avoid showing internal error in lvs output or pvmoved LVs.
>>  Remove clvmd
>>  Remove lvmlib (api)
>>  Remove lvmetad
>>  Use versionsort to fix archive file expiry beyond 100000 files.
>> Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
>> ---
>> config/rootfiles/common/lvm2 | 16 +++++++++++-----
>> lfs/lvm2                     |  6 +++---
>> 2 files changed, 14 insertions(+), 8 deletions(-)
>> diff --git a/config/rootfiles/common/lvm2 b/config/rootfiles/common/lvm2
>> index 258f3201f..bd1329e54 100644
>> --- a/config/rootfiles/common/lvm2
>> +++ b/config/rootfiles/common/lvm2
>> @@ -9,15 +9,17 @@ etc/lvm/lvm.conf
>> #etc/lvm/profile/metadata_profile_template.profile
>> #etc/lvm/profile/thin-generic.profile
>> #etc/lvm/profile/thin-performance.profile
>> +#etc/lvm/profile/vdo-small.profile
>> lib/udev/rules.d/10-dm.rules
>> lib/udev/rules.d/11-dm-lvm.rules
>> lib/udev/rules.d/13-dm-disk.rules
>> -lib/udev/rules.d/69-dm-lvm-metad.rules
>> +lib/udev/rules.d/69-dm-lvm.rules
>> lib/udev/rules.d/95-dm-notify.rules
>> #usr/include/libdevmapper.h
>> #usr/lib/libdevmapper.so
>> usr/lib/libdevmapper.so.1.02
>> #usr/lib/pkgconfig/devmapper.pc
>> +#usr/libexec/lvresize_fs_helper
>> usr/sbin/blkdeactivate
>> usr/sbin/dmsetup
>> usr/sbin/dmstats
>> @@ -28,11 +30,11 @@ usr/sbin/lvcreate
>> usr/sbin/lvdisplay
>> usr/sbin/lvextend
>> usr/sbin/lvm
>> -usr/sbin/lvmconf
>> +usr/sbin/lvm_import_vdo
>> usr/sbin/lvmconfig
>> +usr/sbin/lvmdevices
>> usr/sbin/lvmdiskscan
>> usr/sbin/lvmdump
>> -usr/sbin/lvmetad
>> usr/sbin/lvmsadc
>> usr/sbin/lvmsar
>> usr/sbin/lvreduce
>> @@ -61,6 +63,7 @@ usr/sbin/vgexport
>> usr/sbin/vgextend
>> usr/sbin/vgimport
>> usr/sbin/vgimportclone
>> +usr/sbin/vgimportdevices
>> usr/sbin/vgmerge
>> usr/sbin/vgmknodes
>> usr/sbin/vgreduce
>> @@ -70,11 +73,13 @@ usr/sbin/vgs
>> usr/sbin/vgscan
>> usr/sbin/vgsplit
>> #usr/share/man/man5/lvm.conf.5
>> +#usr/share/man/man7/lvmautoactivation.7
>> #usr/share/man/man7/lvmcache.7
>> #usr/share/man/man7/lvmraid.7
>> #usr/share/man/man7/lvmreport.7
>> #usr/share/man/man7/lvmsystemid.7
>> #usr/share/man/man7/lvmthin.7
>> +#usr/share/man/man7/lvmvdo.7
>> #usr/share/man/man8/blkdeactivate.8
>> #usr/share/man/man8/dmsetup.8
>> #usr/share/man/man8/dmstats.8
>> @@ -89,11 +94,11 @@ usr/sbin/vgsplit
>> #usr/share/man/man8/lvm-fullreport.8
>> #usr/share/man/man8/lvm-lvpoll.8
>> #usr/share/man/man8/lvm.8
>> -#usr/share/man/man8/lvmconf.8
>> +#usr/share/man/man8/lvm_import_vdo.8
>> #usr/share/man/man8/lvmconfig.8
>> +#usr/share/man/man8/lvmdevices.8
>> #usr/share/man/man8/lvmdiskscan.8
>> #usr/share/man/man8/lvmdump.8
>> -#usr/share/man/man8/lvmetad.8
>> #usr/share/man/man8/lvmsadc.8
>> #usr/share/man/man8/lvmsar.8
>> #usr/share/man/man8/lvreduce.8
>> @@ -122,6 +127,7 @@ usr/sbin/vgsplit
>> #usr/share/man/man8/vgextend.8
>> #usr/share/man/man8/vgimport.8
>> #usr/share/man/man8/vgimportclone.8
>> +#usr/share/man/man8/vgimportdevices.8
>> #usr/share/man/man8/vgmerge.8
>> #usr/share/man/man8/vgmknodes.8
>> #usr/share/man/man8/vgreduce.8
>> diff --git a/lfs/lvm2 b/lfs/lvm2
>> index 7e327a021..5b39f05f5 100644
>> --- a/lfs/lvm2
>> +++ b/lfs/lvm2
>> @@ -1,7 +1,7 @@
>> ###############################################################################
>> #                                                                             #
>> # IPFire.org - A linux based firewall                                         #
>> -# Copyright (C) 2007-2018  IPFire Team  <info(a)ipfire.org>                     #
>> +# Copyright (C) 2007-2023  IPFire Team  <info(a)ipfire.org>                     #
>> #                                                                             #
>> # This program is free software: you can redistribute it and/or modify        #
>> # it under the terms of the GNU General Public License as published by        #
>> @@ -24,7 +24,7 @@
>> include Config
>> -VER        = 2.02.188
>> +VER        = 2.03.21
>> THISAPP    = LVM2.$(VER)
>> DL_FILE    = $(THISAPP).tgz
>> @@ -40,7 +40,7 @@ objects = $(DL_FILE)
>> $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>> -$(DL_FILE)_BLAKE2 =
>> bed90c8454cd4b20fdeec6dcbf5a9f97c9310671aea3b2252f8069cfa439fcb050f5ad95f928a7125a1734a4dc5ac985da99a4a570538e377a7205191a505476
>> +$(DL_FILE)_BLAKE2 =
>> 529bc01b3d1ba6207c9ddc95309b39e6293fcd0286334240b9fdc076da0b7bc7e026338ec0243564ec153f2fb5009014149c3f8e0db0cd47a29418af62068728
>> install : $(TARGET)