Hi Timmothy Wilson, we left the 1024 bit choice at this time in cause it provides a shortened time for the whole X509 generation. On slow boards or systems with less entropy the DH generation can take also with 2048 bit DH-parameter a long time (measured at this time up to 10 minutes with 2048 bits) . We´ve made at development time a short list which you can find here --> http://wiki.ipfire.org/en/configuration/services/openvpn/extensions/zertkonvert where you can find also the needed time for DH-parameter generation. May 10 Minutes for an e.g. ALIX board is a lot and may too much ? Nevertheless you can upload external generated DH-parameter over the WUI --> http://wiki.ipfire.org/en/configuration/services/openvpn/config/upload_gen so a prepackaged DH-parameter can also be uploaded but the generation time can be left short too. Another thing is, could you may provide more informations about the insecurity of 2048 bit DH-parameters ? On OpenVPN hardening side they called it "Use of 2048-bit is a good minimum." --> https://community.openvpn.net/openvpn/wiki/Hardening . Shurley a longer parameter increases security but needs also lots of more time to generate and with the usage of the upload function may a better way by only hint the 1024 parameter as insecure so both is possible ? May an "insecure" hint in the flip menu is enough ? A possible "insecure" hint could also be placed for the "Hash algorithm" in "Cryptographic options" for SHA1 --> https://www.schneier.com/blog/archives/2005/02/sha1_broken.html <-- from 2005 :-( . Some suggestions from here. Greetings, Erik Am 23.11.2015 um 15:18 schrieb IT Superhack: > The OpenVPN CGI offers to create a DH param. The patch below disables > the generation of 1024 bit params and marks 2048 bit params as > weak/insecure. > > It is recommended to use DH params with at least 3072 bits, shorter ones > are considered as insecure. The patch does not affect systems where > already DH params were created. > > Sorry for the crappy line breaks by my mail agent, but it cannot switch > this off and git send-email does not work on my system (starttls issues). > > Signed-off-by: Timmothy Wilson > --- > html/cgi-bin/ovpnmain.cgi | 3 +-- > langs/de/cgi-bin/de.pl | 1 + > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/html/cgi-bin/ovpnmain.cgi b/html/cgi-bin/ovpnmain.cgi > index 62af54e..4813128 100644 > --- a/html/cgi-bin/ovpnmain.cgi > +++ b/html/cgi-bin/ovpnmain.cgi > @@ -1313,8 +1313,7 @@ END >
> > > diff --git a/langs/de/cgi-bin/de.pl b/langs/de/cgi-bin/de.pl > index 2bca854..bfed92b 100644 > --- a/langs/de/cgi-bin/de.pl > +++ b/langs/de/cgi-bin/de.pl > @@ -1291,6 +1291,7 @@ > 'incorrect password' => 'Fehlerhaftes Passwort', > 'info' => 'Info', > 'init string' => 'Initialisierung:', > +'insecure' => 'unsicher', > 'insert floppy' => 'Legen Sie eine formatierte Diskette in das > Floppy-Laufwerk in IPFire und klicken auf Datensicherung auf > Diskette, um die Systemeinstellungen zu sichern. Überprüfen Sie das > Ergebnis sorgfältig, um sicher zu sein, dass die Datensicherung > vollständig und erfolgreich abgeschlossen wurde.', > 'install' => 'Installieren', > 'install new update' => 'Installiere neues Update:', > -- > 1.8.4.5 > >