* [PATCH 0/2] Added new Package node_exporter
@ 2021-05-06 19:46 Holger Sunke
2021-05-06 19:46 ` [PATCH 1/2] Added i586/386 support for GO language required for node_exporter Holger Sunke
` (2 more replies)
0 siblings, 3 replies; 17+ messages in thread
From: Holger Sunke @ 2021-05-06 19:46 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 1515 bytes --]
These patches add the new package node_exporter as discussed in the form thread:
https://community.ipfire.org/t/please-add-prometheus-exporter/3555
GO language is required to compile node_exporter. In order to compile
node_exporter for i586 arch, "go" package supported architecture
must be extended for this.
You'll likely want to download packages and adjust DL_FROM variables
in "go" and "node_exporter" LFS scripts.
Holger Sunke (2):
Added i586/386 support for GO language required for node_exporter.
Added new node_exporter package.
config/rootfiles/packages/node_exporter | 3 +
lfs/Config | 4 +
lfs/go | 6 +-
lfs/node_exporter | 88 +++++++++++++++++++
make.sh | 1 +
src/paks/node_exporter/install.sh | 31 +++++++
src/paks/node_exporter/uninstall.sh | 30 +++++++
src/paks/node_exporter/update.sh | 27 ++++++
..._exporter-configurable-initd-options.patch | 48 ++++++++++
9 files changed, 235 insertions(+), 3 deletions(-)
create mode 100644 config/rootfiles/packages/node_exporter
create mode 100644 lfs/node_exporter
create mode 100644 src/paks/node_exporter/install.sh
create mode 100644 src/paks/node_exporter/uninstall.sh
create mode 100644 src/paks/node_exporter/update.sh
create mode 100644 src/patches/node_exporter-configurable-initd-options.patch
--
2.30.2
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 1/2] Added i586/386 support for GO language required for node_exporter. 2021-05-06 19:46 [PATCH 0/2] Added new Package node_exporter Holger Sunke @ 2021-05-06 19:46 ` Holger Sunke 2021-05-06 20:26 ` Adolf Belka 2021-05-07 11:28 ` Michael Tremer 2021-05-06 19:46 ` [PATCH 2/2] Added new node_exporter package Holger Sunke 2021-05-06 20:43 ` [PATCH 0/2] Added new Package node_exporter Adolf Belka 2 siblings, 2 replies; 17+ messages in thread From: Holger Sunke @ 2021-05-06 19:46 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 1334 bytes --] --- lfs/Config | 4 ++++ lfs/go | 6 +++--- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/lfs/Config b/lfs/Config index eadbbc408..4d0f2f00b 100644 --- a/lfs/Config +++ b/lfs/Config @@ -138,6 +138,10 @@ ifeq "$(BUILD_ARCH)" "aarch64" GOARCH = arm64 endif +ifeq "$(BUILD_ARCH)" "i586" + GOARCH = 386 +endif + ############################################################################### # Common Macro Definitions ############################################################################### diff --git a/lfs/go b/lfs/go index 6ebb37080..97effcb84 100644 --- a/lfs/go +++ b/lfs/go @@ -28,10 +28,9 @@ VER = 1.15.4 THISAPP = go-$(VER) DL_FILE = go$(VER).$(GOOS)-$(GOARCH).tar.gz -DL_FROM = $(URL_IPFIRE) +DL_FROM = https://golang.org/dl/ DIR_APP = $(DIR_SRC)/go TARGET = $(DIR_INFO)/$(THISAPP) -SUP_ARCH = x86_64 ############################################################################### # Top-level Rules @@ -41,7 +40,8 @@ objects = $(DL_FILE) $(DL_FILE) = $(DL_FROM)/$(DL_FILE) -$(DL_FILE)_MD5 = 8e9d11a16f03372c82c5134278a0bd7d +go$(VER).$(GOOS)-amd64.tar.gz_MD5 = 8e9d11a16f03372c82c5134278a0bd7d +go$(VER).$(GOOS)-386.tar.gz_MD5 = 8d1c3539c88710273f61b0c810b7448c install : $(TARGET) -- 2.30.2 ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] Added i586/386 support for GO language required for node_exporter. 2021-05-06 19:46 ` [PATCH 1/2] Added i586/386 support for GO language required for node_exporter Holger Sunke @ 2021-05-06 20:26 ` Adolf Belka 2021-05-07 11:28 ` Michael Tremer 1 sibling, 0 replies; 17+ messages in thread From: Adolf Belka @ 2021-05-06 20:26 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 1710 bytes --] Hi Holger, On 06/05/2021 21:46, Holger Sunke wrote: > --- > lfs/Config | 4 ++++ > lfs/go | 6 +++--- > 2 files changed, 7 insertions(+), 3 deletions(-) > > diff --git a/lfs/Config b/lfs/Config > index eadbbc408..4d0f2f00b 100644 > --- a/lfs/Config > +++ b/lfs/Config > @@ -138,6 +138,10 @@ ifeq "$(BUILD_ARCH)" "aarch64" > GOARCH = arm64 > endif > > +ifeq "$(BUILD_ARCH)" "i586" > + GOARCH = 386 > +endif > + A question I would have here is if creating this package in i586 architecture makes sense when in 7 months the i586 version of IPFire will have reached End Of Life and will no longer be updated. Regards, Adolf > ############################################################################### > # Common Macro Definitions > ############################################################################### > diff --git a/lfs/go b/lfs/go > index 6ebb37080..97effcb84 100644 > --- a/lfs/go > +++ b/lfs/go > @@ -28,10 +28,9 @@ VER = 1.15.4 > > THISAPP = go-$(VER) > DL_FILE = go$(VER).$(GOOS)-$(GOARCH).tar.gz > -DL_FROM = $(URL_IPFIRE) > +DL_FROM = https://golang.org/dl/ > DIR_APP = $(DIR_SRC)/go > TARGET = $(DIR_INFO)/$(THISAPP) > -SUP_ARCH = x86_64 > > ############################################################################### > # Top-level Rules > @@ -41,7 +40,8 @@ objects = $(DL_FILE) > > $(DL_FILE) = $(DL_FROM)/$(DL_FILE) > > -$(DL_FILE)_MD5 = 8e9d11a16f03372c82c5134278a0bd7d > +go$(VER).$(GOOS)-amd64.tar.gz_MD5 = 8e9d11a16f03372c82c5134278a0bd7d > +go$(VER).$(GOOS)-386.tar.gz_MD5 = 8d1c3539c88710273f61b0c810b7448c > > install : $(TARGET) > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] Added i586/386 support for GO language required for node_exporter. 2021-05-06 19:46 ` [PATCH 1/2] Added i586/386 support for GO language required for node_exporter Holger Sunke 2021-05-06 20:26 ` Adolf Belka @ 2021-05-07 11:28 ` Michael Tremer 2021-05-07 18:19 ` Holger Sunke 1 sibling, 1 reply; 17+ messages in thread From: Michael Tremer @ 2021-05-07 11:28 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 2365 bytes --] Hello Holger, Thanks for this patch, but I am afraid it doesn’t do exactly what you intend to do. > On 6 May 2021, at 20:46, Holger Sunke <holger.sunke(a)posteo.de> wrote: > > --- > lfs/Config | 4 ++++ > lfs/go | 6 +++--- > 2 files changed, 7 insertions(+), 3 deletions(-) > > diff --git a/lfs/Config b/lfs/Config > index eadbbc408..4d0f2f00b 100644 > --- a/lfs/Config > +++ b/lfs/Config > @@ -138,6 +138,10 @@ ifeq "$(BUILD_ARCH)" "aarch64" > GOARCH = arm64 > endif > > +ifeq "$(BUILD_ARCH)" "i586" > + GOARCH = 386 > +endif This is fine. > + > ############################################################################### > # Common Macro Definitions > ############################################################################### > diff --git a/lfs/go b/lfs/go > index 6ebb37080..97effcb84 100644 > --- a/lfs/go > +++ b/lfs/go > @@ -28,10 +28,9 @@ VER = 1.15.4 > > THISAPP = go-$(VER) > DL_FILE = go$(VER).$(GOOS)-$(GOARCH).tar.gz > -DL_FROM = $(URL_IPFIRE) > +DL_FROM = https://golang.org/dl/ > DIR_APP = $(DIR_SRC)/go > TARGET = $(DIR_INFO)/$(THISAPP) > -SUP_ARCH = x86_64 This however enables Go for all architectures including aarch64 and armv5tel which is not what you intend. The correct solution would be to add i586 to the list of supported architectures. However, I would object to only add Go for i586 because you personally use IPFire on this architecture (please not Adolf’s remarks on our schedule to discontinue i586). We only build Go for x86_64 because the only package that uses it is the Amazon SSM agent which is not relevant on any other architecture. node_exporter seems to be a package that could in theory run on any architecture and I feel that we should not discriminate by only building something for one architecture because we do not want to test it on any of the others. -Michael > > ############################################################################### > # Top-level Rules > @@ -41,7 +40,8 @@ objects = $(DL_FILE) > > $(DL_FILE) = $(DL_FROM)/$(DL_FILE) > > -$(DL_FILE)_MD5 = 8e9d11a16f03372c82c5134278a0bd7d > +go$(VER).$(GOOS)-amd64.tar.gz_MD5 = 8e9d11a16f03372c82c5134278a0bd7d > +go$(VER).$(GOOS)-386.tar.gz_MD5 = 8d1c3539c88710273f61b0c810b7448c > > install : $(TARGET) > > -- > 2.30.2 > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] Added i586/386 support for GO language required for node_exporter. 2021-05-07 11:28 ` Michael Tremer @ 2021-05-07 18:19 ` Holger Sunke 2021-05-11 9:53 ` Michael Tremer 0 siblings, 1 reply; 17+ messages in thread From: Holger Sunke @ 2021-05-07 18:19 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 2714 bytes --] Hello Michael, Am 07.05.21 um 13:28 schrieb Michael Tremer: > Hello Holger, > > Thanks for this patch, but I am afraid it doesn’t do exactly what you intend to do. > >> On 6 May 2021, at 20:46, Holger Sunke <holger.sunke(a)posteo.de> wrote: >> >> --- >> lfs/Config | 4 ++++ >> lfs/go | 6 +++--- >> 2 files changed, 7 insertions(+), 3 deletions(-) >> >> diff --git a/lfs/Config b/lfs/Config >> index eadbbc408..4d0f2f00b 100644 >> --- a/lfs/Config >> +++ b/lfs/Config >> @@ -138,6 +138,10 @@ ifeq "$(BUILD_ARCH)" "aarch64" >> GOARCH = arm64 >> endif >> >> +ifeq "$(BUILD_ARCH)" "i586" >> + GOARCH = 386 >> +endif > > This is fine. > >> + >> ############################################################################### >> # Common Macro Definitions >> ############################################################################### >> diff --git a/lfs/go b/lfs/go >> index 6ebb37080..97effcb84 100644 >> --- a/lfs/go >> +++ b/lfs/go >> @@ -28,10 +28,9 @@ VER = 1.15.4 >> >> THISAPP = go-$(VER) >> DL_FILE = go$(VER).$(GOOS)-$(GOARCH).tar.gz >> -DL_FROM = $(URL_IPFIRE) >> +DL_FROM = https://golang.org/dl/ >> DIR_APP = $(DIR_SRC)/go >> TARGET = $(DIR_INFO)/$(THISAPP) >> -SUP_ARCH = x86_64 > > This however enables Go for all architectures including aarch64 and armv5tel which is not what you intend. > > The correct solution would be to add i586 to the list of supported architectures. > > However, I would object to only add Go for i586 because you personally use IPFire on this architecture (please not Adolf’s remarks on our schedule to discontinue i586). We only build Go for x86_64 because the only package that uses it is the Amazon SSM agent which is not relevant on any other architecture. node_exporter seems to be a package that could in theory run on any architecture and I feel that we should not discriminate by only building something for one architecture because we do not want to test it on any of the others. Not sure if I get you right, but finally I think I should change the Config to make "go" compile for _all_ architectures supported by ipfire as node_exporter depends on it. Kind regards Holger > > -Michael > >> >> ############################################################################### >> # Top-level Rules >> @@ -41,7 +40,8 @@ objects = $(DL_FILE) >> >> $(DL_FILE) = $(DL_FROM)/$(DL_FILE) >> >> -$(DL_FILE)_MD5 = 8e9d11a16f03372c82c5134278a0bd7d >> +go$(VER).$(GOOS)-amd64.tar.gz_MD5 = 8e9d11a16f03372c82c5134278a0bd7d >> +go$(VER).$(GOOS)-386.tar.gz_MD5 = 8d1c3539c88710273f61b0c810b7448c >> >> install : $(TARGET) >> >> -- >> 2.30.2 >> > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] Added i586/386 support for GO language required for node_exporter. 2021-05-07 18:19 ` Holger Sunke @ 2021-05-11 9:53 ` Michael Tremer 2021-05-21 8:56 ` Holger Sunke 0 siblings, 1 reply; 17+ messages in thread From: Michael Tremer @ 2021-05-11 9:53 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 3000 bytes --] Hello, > On 7 May 2021, at 19:19, Holger Sunke <holger.sunke(a)posteo.de> wrote: > > Hello Michael, > > > Am 07.05.21 um 13:28 schrieb Michael Tremer: >> Hello Holger, >> Thanks for this patch, but I am afraid it doesn’t do exactly what you intend to do. >>> On 6 May 2021, at 20:46, Holger Sunke <holger.sunke(a)posteo.de> wrote: >>> >>> --- >>> lfs/Config | 4 ++++ >>> lfs/go | 6 +++--- >>> 2 files changed, 7 insertions(+), 3 deletions(-) >>> >>> diff --git a/lfs/Config b/lfs/Config >>> index eadbbc408..4d0f2f00b 100644 >>> --- a/lfs/Config >>> +++ b/lfs/Config >>> @@ -138,6 +138,10 @@ ifeq "$(BUILD_ARCH)" "aarch64" >>> GOARCH = arm64 >>> endif >>> >>> +ifeq "$(BUILD_ARCH)" "i586" >>> + GOARCH = 386 >>> +endif >> This is fine. >>> + >>> ############################################################################### >>> # Common Macro Definitions >>> ############################################################################### >>> diff --git a/lfs/go b/lfs/go >>> index 6ebb37080..97effcb84 100644 >>> --- a/lfs/go >>> +++ b/lfs/go >>> @@ -28,10 +28,9 @@ VER = 1.15.4 >>> >>> THISAPP = go-$(VER) >>> DL_FILE = go$(VER).$(GOOS)-$(GOARCH).tar.gz >>> -DL_FROM = $(URL_IPFIRE) >>> +DL_FROM = https://golang.org/dl/ >>> DIR_APP = $(DIR_SRC)/go >>> TARGET = $(DIR_INFO)/$(THISAPP) >>> -SUP_ARCH = x86_64 >> This however enables Go for all architectures including aarch64 and armv5tel which is not what you intend. >> The correct solution would be to add i586 to the list of supported architectures. >> However, I would object to only add Go for i586 because you personally use IPFire on this architecture (please not Adolf’s remarks on our schedule to discontinue i586). We only build Go for x86_64 because the only package that uses it is the Amazon SSM agent which is not relevant on any other architecture. node_exporter seems to be a package that could in theory run on any architecture and I feel that we should not discriminate by only building something for one architecture because we do not want to test it on any of the others. > > Not sure if I get you right, but finally I think I should change the Config to make "go" compile for _all_ architectures supported by ipfire as node_exporter depends on it. Yes, that is correct. We aim to treat all architectures the same. Sometimes that isn’t possible, but that isn’t the case here. Best, -Michael > > Kind regards > > Holger > >> -Michael >>> >>> ############################################################################### >>> # Top-level Rules >>> @@ -41,7 +40,8 @@ objects = $(DL_FILE) >>> >>> $(DL_FILE) = $(DL_FROM)/$(DL_FILE) >>> >>> -$(DL_FILE)_MD5 = 8e9d11a16f03372c82c5134278a0bd7d >>> +go$(VER).$(GOOS)-amd64.tar.gz_MD5 = 8e9d11a16f03372c82c5134278a0bd7d >>> +go$(VER).$(GOOS)-386.tar.gz_MD5 = 8d1c3539c88710273f61b0c810b7448c >>> >>> install : $(TARGET) >>> >>> -- >>> 2.30.2 ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] Added i586/386 support for GO language required for node_exporter. 2021-05-11 9:53 ` Michael Tremer @ 2021-05-21 8:56 ` Holger Sunke 2021-05-21 8:59 ` Michael Tremer 0 siblings, 1 reply; 17+ messages in thread From: Holger Sunke @ 2021-05-21 8:56 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 3249 bytes --] Hello Michael, Am 11.05.21 um 11:53 schrieb Michael Tremer: > Hello, > >> On 7 May 2021, at 19:19, Holger Sunke <holger.sunke(a)posteo.de> wrote: >> >> Hello Michael, >> >> >> Am 07.05.21 um 13:28 schrieb Michael Tremer: >>> Hello Holger, >>> Thanks for this patch, but I am afraid it doesn’t do exactly what you intend to do. >>>> On 6 May 2021, at 20:46, Holger Sunke <holger.sunke(a)posteo.de> wrote: >>>> >>>> --- >>>> lfs/Config | 4 ++++ >>>> lfs/go | 6 +++--- >>>> 2 files changed, 7 insertions(+), 3 deletions(-) >>>> >>>> diff --git a/lfs/Config b/lfs/Config >>>> index eadbbc408..4d0f2f00b 100644 >>>> --- a/lfs/Config >>>> +++ b/lfs/Config >>>> @@ -138,6 +138,10 @@ ifeq "$(BUILD_ARCH)" "aarch64" >>>> GOARCH = arm64 >>>> endif >>>> >>>> +ifeq "$(BUILD_ARCH)" "i586" >>>> + GOARCH = 386 >>>> +endif >>> This is fine. >>>> + >>>> ############################################################################### >>>> # Common Macro Definitions >>>> ############################################################################### >>>> diff --git a/lfs/go b/lfs/go >>>> index 6ebb37080..97effcb84 100644 >>>> --- a/lfs/go >>>> +++ b/lfs/go >>>> @@ -28,10 +28,9 @@ VER = 1.15.4 >>>> >>>> THISAPP = go-$(VER) >>>> DL_FILE = go$(VER).$(GOOS)-$(GOARCH).tar.gz >>>> -DL_FROM = $(URL_IPFIRE) >>>> +DL_FROM = https://golang.org/dl/ >>>> DIR_APP = $(DIR_SRC)/go >>>> TARGET = $(DIR_INFO)/$(THISAPP) >>>> -SUP_ARCH = x86_64 >>> This however enables Go for all architectures including aarch64 and armv5tel which is not what you intend. >>> The correct solution would be to add i586 to the list of supported architectures. >>> However, I would object to only add Go for i586 because you personally use IPFire on this architecture (please not Adolf’s remarks on our schedule to discontinue i586). We only build Go for x86_64 because the only package that uses it is the Amazon SSM agent which is not relevant on any other architecture. node_exporter seems to be a package that could in theory run on any architecture and I feel that we should not discriminate by only building something for one architecture because we do not want to test it on any of the others. >> >> Not sure if I get you right, but finally I think I should change the Config to make "go" compile for _all_ architectures supported by ipfire as node_exporter depends on it. > > Yes, that is correct. We aim to treat all architectures the same. Sometimes that isn’t possible, but that isn’t the case here. > > Best, > -Michael > Dou you have a list of all architectures supported by IPFire beyond i586(legacy), aarch64(=arm64?), x86_64 and arm? Kind regards Holger >> >>> -Michael >>>> >>>> ############################################################################### >>>> # Top-level Rules >>>> @@ -41,7 +40,8 @@ objects = $(DL_FILE) >>>> >>>> $(DL_FILE) = $(DL_FROM)/$(DL_FILE) >>>> >>>> -$(DL_FILE)_MD5 = 8e9d11a16f03372c82c5134278a0bd7d >>>> +go$(VER).$(GOOS)-amd64.tar.gz_MD5 = 8e9d11a16f03372c82c5134278a0bd7d >>>> +go$(VER).$(GOOS)-386.tar.gz_MD5 = 8d1c3539c88710273f61b0c810b7448c >>>> >>>> install : $(TARGET) >>>> >>>> -- >>>> 2.30.2 > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 1/2] Added i586/386 support for GO language required for node_exporter. 2021-05-21 8:56 ` Holger Sunke @ 2021-05-21 8:59 ` Michael Tremer 0 siblings, 0 replies; 17+ messages in thread From: Michael Tremer @ 2021-05-21 8:59 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 3972 bytes --] Hello Holger, > On 21 May 2021, at 09:56, Holger Sunke <holger.sunke(a)posteo.de> wrote: > > Hello Michael, > > > Am 11.05.21 um 11:53 schrieb Michael Tremer: >> Hello, >>> On 7 May 2021, at 19:19, Holger Sunke <holger.sunke(a)posteo.de> wrote: >>> >>> Hello Michael, >>> >>> >>> Am 07.05.21 um 13:28 schrieb Michael Tremer: >>>> Hello Holger, >>>> Thanks for this patch, but I am afraid it doesn’t do exactly what you intend to do. >>>>> On 6 May 2021, at 20:46, Holger Sunke <holger.sunke(a)posteo.de> wrote: >>>>> >>>>> --- >>>>> lfs/Config | 4 ++++ >>>>> lfs/go | 6 +++--- >>>>> 2 files changed, 7 insertions(+), 3 deletions(-) >>>>> >>>>> diff --git a/lfs/Config b/lfs/Config >>>>> index eadbbc408..4d0f2f00b 100644 >>>>> --- a/lfs/Config >>>>> +++ b/lfs/Config >>>>> @@ -138,6 +138,10 @@ ifeq "$(BUILD_ARCH)" "aarch64" >>>>> GOARCH = arm64 >>>>> endif >>>>> >>>>> +ifeq "$(BUILD_ARCH)" "i586" >>>>> + GOARCH = 386 >>>>> +endif >>>> This is fine. >>>>> + >>>>> ############################################################################### >>>>> # Common Macro Definitions >>>>> ############################################################################### >>>>> diff --git a/lfs/go b/lfs/go >>>>> index 6ebb37080..97effcb84 100644 >>>>> --- a/lfs/go >>>>> +++ b/lfs/go >>>>> @@ -28,10 +28,9 @@ VER = 1.15.4 >>>>> >>>>> THISAPP = go-$(VER) >>>>> DL_FILE = go$(VER).$(GOOS)-$(GOARCH).tar.gz >>>>> -DL_FROM = $(URL_IPFIRE) >>>>> +DL_FROM = https://golang.org/dl/ >>>>> DIR_APP = $(DIR_SRC)/go >>>>> TARGET = $(DIR_INFO)/$(THISAPP) >>>>> -SUP_ARCH = x86_64 >>>> This however enables Go for all architectures including aarch64 and armv5tel which is not what you intend. >>>> The correct solution would be to add i586 to the list of supported architectures. >>>> However, I would object to only add Go for i586 because you personally use IPFire on this architecture (please not Adolf’s remarks on our schedule to discontinue i586). We only build Go for x86_64 because the only package that uses it is the Amazon SSM agent which is not relevant on any other architecture. node_exporter seems to be a package that could in theory run on any architecture and I feel that we should not discriminate by only building something for one architecture because we do not want to test it on any of the others. >>> >>> Not sure if I get you right, but finally I think I should change the Config to make "go" compile for _all_ architectures supported by ipfire as node_exporter depends on it. >> Yes, that is correct. We aim to treat all architectures the same. Sometimes that isn’t possible, but that isn’t the case here. >> Best, >> -Michael > > Dou you have a list of all architectures supported by IPFire beyond i586(legacy), aarch64(=arm64?), x86_64 and arm? We currently support these architectures: * x86_64 which is our primary architecture with by far the most users on it * aarch64 * i586 which is currently deprecated and will be dropped soon (https://blog.ipfire.org/post/new-year-more-bits) * armv5tel - this might be tricky because we do not have any floating-point support. However, the kernel requires that which means that you will at least need an armv6l processor in order to run on this. Depending on what Go provides upstream, armv6l might be fine. Best, -Michael > > Kind regards > > Holger >>> >>>> -Michael >>>>> >>>>> ############################################################################### >>>>> # Top-level Rules >>>>> @@ -41,7 +40,8 @@ objects = $(DL_FILE) >>>>> >>>>> $(DL_FILE) = $(DL_FROM)/$(DL_FILE) >>>>> >>>>> -$(DL_FILE)_MD5 = 8e9d11a16f03372c82c5134278a0bd7d >>>>> +go$(VER).$(GOOS)-amd64.tar.gz_MD5 = 8e9d11a16f03372c82c5134278a0bd7d >>>>> +go$(VER).$(GOOS)-386.tar.gz_MD5 = 8d1c3539c88710273f61b0c810b7448c >>>>> >>>>> install : $(TARGET) >>>>> >>>>> -- >>>>> 2.30.2 ^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 2/2] Added new node_exporter package. 2021-05-06 19:46 [PATCH 0/2] Added new Package node_exporter Holger Sunke 2021-05-06 19:46 ` [PATCH 1/2] Added i586/386 support for GO language required for node_exporter Holger Sunke @ 2021-05-06 19:46 ` Holger Sunke 2021-05-06 20:58 ` Adolf Belka 2021-05-06 20:43 ` [PATCH 0/2] Added new Package node_exporter Adolf Belka 2 siblings, 1 reply; 17+ messages in thread From: Holger Sunke @ 2021-05-06 19:46 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 13293 bytes --] --- config/rootfiles/packages/node_exporter | 3 + lfs/node_exporter | 88 +++++++++++++++++++ make.sh | 1 + src/paks/node_exporter/install.sh | 31 +++++++ src/paks/node_exporter/uninstall.sh | 30 +++++++ src/paks/node_exporter/update.sh | 27 ++++++ ..._exporter-configurable-initd-options.patch | 48 ++++++++++ 7 files changed, 228 insertions(+) create mode 100644 config/rootfiles/packages/node_exporter create mode 100644 lfs/node_exporter create mode 100644 src/paks/node_exporter/install.sh create mode 100644 src/paks/node_exporter/uninstall.sh create mode 100644 src/paks/node_exporter/update.sh create mode 100644 src/patches/node_exporter-configurable-initd-options.patch diff --git a/config/rootfiles/packages/node_exporter b/config/rootfiles/packages/node_exporter new file mode 100644 index 000000000..20ec55174 --- /dev/null +++ b/config/rootfiles/packages/node_exporter @@ -0,0 +1,3 @@ +usr/bin/node_exporter +etc/node_exporter +etc/rc.d/init.d/node_exporter diff --git a/lfs/node_exporter b/lfs/node_exporter new file mode 100644 index 000000000..3bb4db60e --- /dev/null +++ b/lfs/node_exporter @@ -0,0 +1,88 @@ +############################################################################## +# # +# IPFire.org - A linux based firewall # +# Copyright (C) 2007 Michael Tremer & Christian Schmidt # +# # +# This program is free software: you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation, either version 3 of the License, or # +# (at your option) any later version. # +# # +# This program is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with this program. If not, see <http://www.gnu.org/licenses/>. # +# # +############################################################################### + +############################################################################### +# Definitions +############################################################################### + +include Config + +VER = 1.1.2 + +THISAPP = node_exporter-$(VER) +DL_FILE = $(THISAPP).tar.gz +#DL_FROM = https://github.com/prometheus/node_exporter/archive/refs/tags/v1.1.2.tar.gz +DL_FROM = https://github.com/prometheus/node_exporter/archive/v$(VER)/ +DIR_APP = $(DIR_SRC)/$(THISAPP) +TARGET = $(DIR_INFO)/$(THISAPP) +PROG = node_exporter +PAK_VER = 1 + +DEPS = "" + +############################################################################### +# Top-level Rules +############################################################################### + +objects = $(DL_FILE) + +$(DL_FILE) = $(DL_FROM)/$(DL_FILE) + +$(DL_FILE)_MD5 = 33c2be846dbd502f9c0efab149a8cbc5 + +install : $(TARGET) +check : $(patsubst %,$(DIR_CHK)/%,$(objects)) + +download : $(patsubst %,$(DIR_DL)/%,$(objects)) + +md5 : $(subst %,%_MD5,$(objects)) + +dist : + @$(PAK) + +############################################################################### +# Downloading, checking, md5sum +############################################################################### + +$(patsubst %,$(DIR_CHK)/%,$(objects)) : + @$(CHECK) + +$(patsubst %,$(DIR_DL)/%,$(objects)) : + @$(LOAD) + +$(subst %,%_MD5,$(objects)) : + @$(MD5) + +############################################################################### +# Installation Details +############################################################################### + +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) + @$(PREBUILD) + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) + cd $(DIR_APP) && patch -Np1 -i $(DIR_SRC)/src/patches/node_exporter-configurable-initd-options.patch + cd $(DIR_APP) && make build $(MAKETUNING) $(EXTRA_MAKE) + cd $(DIR_APP) && cp node_exporter /usr/bin + cd $(DIR_APP) && cp examples/init.d/node_exporter /etc/init.d/ + echo '# Customize node_exporter command line options by editing OPTIONS below:' > /etc/node_exporter + echo 'export OPTIONS="--web.listen-address=:9100"' >> /etc/node_exporter + @rm -rf $(DIR_APP) + @$(POSTBUILD) + diff --git a/make.sh b/make.sh index 2da3aca21..df2995ec5 100755 --- a/make.sh +++ b/make.sh @@ -1640,6 +1640,7 @@ buildipfire() { lfsmake2 ncdu lfsmake2 lshw lfsmake2 socat + lfsmake2 node_exporter } buildinstaller() { diff --git a/src/paks/node_exporter/install.sh b/src/paks/node_exporter/install.sh new file mode 100644 index 000000000..e9272d7cb --- /dev/null +++ b/src/paks/node_exporter/install.sh @@ -0,0 +1,31 @@ +#!/bin/bash +############################################################################ +# # +# This file is part of the IPFire Firewall. # +# # +# IPFire is free software; you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation; either version 2 of the License, or # +# (at your option) any later version. # +# # +# IPFire is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with IPFire; if not, write to the Free Software # +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # +# # +# Copyright (C) 2007 IPFire-Team <info(a)ipfire.org>. # +# # +############################################################################ +# +. /opt/pakfire/lib/functions.sh +extract_files +restore_backup ${NAME} +start_service --background ${NAME} + +ln -svf ../init.d/node_exporter /etc/rc.d/rc0.d/K30node_exporter +ln -svf ../init.d/node_exporter /etc/rc.d/rc3.d/S40node_exporter +ln -svf ../init.d/node_exporter /etc/rc.d/rc6.d/K30node_exporter diff --git a/src/paks/node_exporter/uninstall.sh b/src/paks/node_exporter/uninstall.sh new file mode 100644 index 000000000..710baf8b4 --- /dev/null +++ b/src/paks/node_exporter/uninstall.sh @@ -0,0 +1,30 @@ +#!/bin/bash +############################################################################ +# # +# This file is part of the IPFire Firewall. # +# # +# IPFire is free software; you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation; either version 2 of the License, or # +# (at your option) any later version. # +# # +# IPFire is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with IPFire; if not, write to the Free Software # +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # +# # +# Copyright (C) 2007 IPFire-Team <info(a)ipfire.org>. # +# # +############################################################################ +# +. /opt/pakfire/lib/functions.sh +/etc/init.d/node_exporter stop +make_backup ${NAME} +remove_files + +rm -rfv /etc/rc.d/rc*.d/*node_exporter + diff --git a/src/paks/node_exporter/update.sh b/src/paks/node_exporter/update.sh new file mode 100644 index 000000000..99776659c --- /dev/null +++ b/src/paks/node_exporter/update.sh @@ -0,0 +1,27 @@ +#!/bin/bash +############################################################################ +# # +# This file is part of the IPFire Firewall. # +# # +# IPFire is free software; you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation; either version 2 of the License, or # +# (at your option) any later version. # +# # +# IPFire is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with IPFire; if not, write to the Free Software # +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # +# # +# Copyright (C) 2007-2020 IPFire-Team <info(a)ipfire.org>. # +# # +############################################################################ +# +. /opt/pakfire/lib/functions.sh +extract_backup_includes +./uninstall.sh +./install.sh diff --git a/src/patches/node_exporter-configurable-initd-options.patch b/src/patches/node_exporter-configurable-initd-options.patch new file mode 100644 index 000000000..9f662f918 --- /dev/null +++ b/src/patches/node_exporter-configurable-initd-options.patch @@ -0,0 +1,48 @@ +diff -Nur node_exporter-1.1.2.orig/examples/init.d/node_exporter node_exporter-1.1.2/examples/init.d/node_exporter +--- node_exporter-1.1.2.orig/examples/init.d/node_exporter 2021-03-05 10:27:11.000000000 +0100 ++++ node_exporter-1.1.2/examples/init.d/node_exporter 2021-05-04 14:45:20.644729176 +0200 +@@ -2,9 +2,11 @@ + + RETVAL=0 + PROG="node_exporter" +-EXEC="/etc/node_exporter/node_exporter" ++EXEC="/usr/bin/node_exporter" + LOCKFILE="/var/lock/subsys/$PROG" +-OPTIONS="--web.listen-address=:9100" ++ ++# read configurable OPTIONS ++. /etc/node_exporter + + # Source function library. + if [ -f /etc/rc.d/init.d/functions ]; then +@@ -22,18 +24,16 @@ + echo -n "Starting $PROG: " + nohup $EXEC $OPTIONS >/dev/null 2>&1 & + RETVAL=$? +- [ $RETVAL -eq 0 ] && touch $LOCKFILE && success || failure +- echo ++ [ $RETVAL -eq 0 ] && touch $LOCKFILE && echo success || echo failure + return $RETVAL + fi + } + + stop() { + echo -n "Stopping $PROG: " +- killproc $EXEC ++ killproc $EXEC > /dev/null + RETVAL=$? +- [ $RETVAL -eq 0 ] && rm -r $LOCKFILE && success || failure +- echo ++ [ $RETVAL -eq 0 ] && rm -r $LOCKFILE && echo success || echo failure + } + + restart () +@@ -51,7 +51,7 @@ + stop + ;; + status) +- status $PROG ++ statusproc $PROG + ;; + restart) + restart -- 2.30.2 ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/2] Added new node_exporter package. 2021-05-06 19:46 ` [PATCH 2/2] Added new node_exporter package Holger Sunke @ 2021-05-06 20:58 ` Adolf Belka 0 siblings, 0 replies; 17+ messages in thread From: Adolf Belka @ 2021-05-06 20:58 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 14532 bytes --] Hi Holger, On 06/05/2021 21:46, Holger Sunke wrote: > --- > config/rootfiles/packages/node_exporter | 3 + > lfs/node_exporter | 88 +++++++++++++++++++ > make.sh | 1 + > src/paks/node_exporter/install.sh | 31 +++++++ > src/paks/node_exporter/uninstall.sh | 30 +++++++ > src/paks/node_exporter/update.sh | 27 ++++++ > ..._exporter-configurable-initd-options.patch | 48 ++++++++++ > 7 files changed, 228 insertions(+) > create mode 100644 config/rootfiles/packages/node_exporter > create mode 100644 lfs/node_exporter > create mode 100644 src/paks/node_exporter/install.sh > create mode 100644 src/paks/node_exporter/uninstall.sh > create mode 100644 src/paks/node_exporter/update.sh > create mode 100644 src/patches/node_exporter-configurable-initd-options.patch > > diff --git a/config/rootfiles/packages/node_exporter b/config/rootfiles/packages/node_exporter > new file mode 100644 > index 000000000..20ec55174 > --- /dev/null > +++ b/config/rootfiles/packages/node_exporter > @@ -0,0 +1,3 @@ > +usr/bin/node_exporter > +etc/node_exporter > +etc/rc.d/init.d/node_exporter > diff --git a/lfs/node_exporter b/lfs/node_exporter > new file mode 100644 > index 000000000..3bb4db60e > --- /dev/null > +++ b/lfs/node_exporter > @@ -0,0 +1,88 @@ > +############################################################################## > +# # > +# IPFire.org - A linux based firewall # > +# Copyright (C) 2007 Michael Tremer & Christian Schmidt # > +# # > +# This program is free software: you can redistribute it and/or modify # > +# it under the terms of the GNU General Public License as published by # > +# the Free Software Foundation, either version 3 of the License, or # > +# (at your option) any later version. # > +# # > +# This program is distributed in the hope that it will be useful, # > +# but WITHOUT ANY WARRANTY; without even the implied warranty of # > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # > +# GNU General Public License for more details. # > +# # > +# You should have received a copy of the GNU General Public License # > +# along with this program. If not, see <http://www.gnu.org/licenses/>. # > +# # > +############################################################################### > + > +############################################################################### > +# Definitions > +############################################################################### > + > +include Config > + > +VER = 1.1.2 > + > +THISAPP = node_exporter-$(VER) > +DL_FILE = $(THISAPP).tar.gz > +#DL_FROM = https://github.com/prometheus/node_exporter/archive/refs/tags/v1.1.2.tar.gz > +DL_FROM = https://github.com/prometheus/node_exporter/archive/v$(VER)/ > +DIR_APP = $(DIR_SRC)/$(THISAPP) > +TARGET = $(DIR_INFO)/$(THISAPP) > +PROG = node_exporter > +PAK_VER = 1 > + > +DEPS = "" > + > +############################################################################### > +# Top-level Rules > +############################################################################### > + > +objects = $(DL_FILE) > + > +$(DL_FILE) = $(DL_FROM)/$(DL_FILE) > + > +$(DL_FILE)_MD5 = 33c2be846dbd502f9c0efab149a8cbc5 > + > +install : $(TARGET) > +check : $(patsubst %,$(DIR_CHK)/%,$(objects)) > + > +download : $(patsubst %,$(DIR_DL)/%,$(objects)) > + > +md5 : $(subst %,%_MD5,$(objects)) > + > +dist : > + @$(PAK) > + > +############################################################################### > +# Downloading, checking, md5sum > +############################################################################### > + > +$(patsubst %,$(DIR_CHK)/%,$(objects)) : > + @$(CHECK) > + > +$(patsubst %,$(DIR_DL)/%,$(objects)) : > + @$(LOAD) > + > +$(subst %,%_MD5,$(objects)) : > + @$(MD5) > + > +############################################################################### > +# Installation Details > +############################################################################### > + > +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) > + @$(PREBUILD) > + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) > + cd $(DIR_APP) && patch -Np1 -i $(DIR_SRC)/src/patches/node_exporter-configurable-initd-options.patch > + cd $(DIR_APP) && make build $(MAKETUNING) $(EXTRA_MAKE) > + cd $(DIR_APP) && cp node_exporter /usr/bin > + cd $(DIR_APP) && cp examples/init.d/node_exporter /etc/init.d/ > + echo '# Customize node_exporter command line options by editing OPTIONS below:' > /etc/node_exporter > + echo 'export OPTIONS="--web.listen-address=:9100"' >> /etc/node_exporter The echo commands don't make sense here. No user will ever see them. They will only show up when a build is being carried out. If the expectation is that the user can customise things then this needs to be part of the config of the package, not of the build. > + @rm -rf $(DIR_APP) > + @$(POSTBUILD) > + > diff --git a/make.sh b/make.sh > index 2da3aca21..df2995ec5 100755 > --- a/make.sh > +++ b/make.sh > @@ -1640,6 +1640,7 @@ buildipfire() { > lfsmake2 ncdu > lfsmake2 lshw > lfsmake2 socat > + lfsmake2 node_exporter > } > > buildinstaller() { > diff --git a/src/paks/node_exporter/install.sh b/src/paks/node_exporter/install.sh > new file mode 100644 > index 000000000..e9272d7cb > --- /dev/null > +++ b/src/paks/node_exporter/install.sh > @@ -0,0 +1,31 @@ > +#!/bin/bash > +############################################################################ > +# # > +# This file is part of the IPFire Firewall. # > +# # > +# IPFire is free software; you can redistribute it and/or modify # > +# it under the terms of the GNU General Public License as published by # > +# the Free Software Foundation; either version 2 of the License, or # > +# (at your option) any later version. # > +# # > +# IPFire is distributed in the hope that it will be useful, # > +# but WITHOUT ANY WARRANTY; without even the implied warranty of # > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # > +# GNU General Public License for more details. # > +# # > +# You should have received a copy of the GNU General Public License # > +# along with IPFire; if not, write to the Free Software # > +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # > +# # > +# Copyright (C) 2007 IPFire-Team <info(a)ipfire.org>. # > +# # > +############################################################################ > +# > +. /opt/pakfire/lib/functions.sh > +extract_files > +restore_backup ${NAME} > +start_service --background ${NAME} > + > +ln -svf ../init.d/node_exporter /etc/rc.d/rc0.d/K30node_exporter > +ln -svf ../init.d/node_exporter /etc/rc.d/rc3.d/S40node_exporter > +ln -svf ../init.d/node_exporter /etc/rc.d/rc6.d/K30node_exporter > diff --git a/src/paks/node_exporter/uninstall.sh b/src/paks/node_exporter/uninstall.sh > new file mode 100644 > index 000000000..710baf8b4 > --- /dev/null > +++ b/src/paks/node_exporter/uninstall.sh > @@ -0,0 +1,30 @@ > +#!/bin/bash > +############################################################################ > +# # > +# This file is part of the IPFire Firewall. # > +# # > +# IPFire is free software; you can redistribute it and/or modify # > +# it under the terms of the GNU General Public License as published by # > +# the Free Software Foundation; either version 2 of the License, or # > +# (at your option) any later version. # > +# # > +# IPFire is distributed in the hope that it will be useful, # > +# but WITHOUT ANY WARRANTY; without even the implied warranty of # > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # > +# GNU General Public License for more details. # > +# # > +# You should have received a copy of the GNU General Public License # > +# along with IPFire; if not, write to the Free Software # > +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # > +# # > +# Copyright (C) 2007 IPFire-Team <info(a)ipfire.org>. # > +# # > +############################################################################ > +# > +. /opt/pakfire/lib/functions.sh > +/etc/init.d/node_exporter stop > +make_backup ${NAME} > +remove_files > + > +rm -rfv /etc/rc.d/rc*.d/*node_exporter > + > diff --git a/src/paks/node_exporter/update.sh b/src/paks/node_exporter/update.sh > new file mode 100644 > index 000000000..99776659c > --- /dev/null > +++ b/src/paks/node_exporter/update.sh > @@ -0,0 +1,27 @@ > +#!/bin/bash > +############################################################################ > +# # > +# This file is part of the IPFire Firewall. # > +# # > +# IPFire is free software; you can redistribute it and/or modify # > +# it under the terms of the GNU General Public License as published by # > +# the Free Software Foundation; either version 2 of the License, or # > +# (at your option) any later version. # > +# # > +# IPFire is distributed in the hope that it will be useful, # > +# but WITHOUT ANY WARRANTY; without even the implied warranty of # > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # > +# GNU General Public License for more details. # > +# # > +# You should have received a copy of the GNU General Public License # > +# along with IPFire; if not, write to the Free Software # > +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # > +# # > +# Copyright (C) 2007-2020 IPFire-Team <info(a)ipfire.org>. # > +# # > +############################################################################ > +# > +. /opt/pakfire/lib/functions.sh > +extract_backup_includes > +./uninstall.sh > +./install.sh > diff --git a/src/patches/node_exporter-configurable-initd-options.patch b/src/patches/node_exporter-configurable-initd-options.patch > new file mode 100644 > index 000000000..9f662f918 > --- /dev/null > +++ b/src/patches/node_exporter-configurable-initd-options.patch > @@ -0,0 +1,48 @@ > +diff -Nur node_exporter-1.1.2.orig/examples/init.d/node_exporter node_exporter-1.1.2/examples/init.d/node_exporter > +--- node_exporter-1.1.2.orig/examples/init.d/node_exporter 2021-03-05 10:27:11.000000000 +0100 > ++++ node_exporter-1.1.2/examples/init.d/node_exporter 2021-05-04 14:45:20.644729176 +0200 > +@@ -2,9 +2,11 @@ > + > + RETVAL=0 > + PROG="node_exporter" > +-EXEC="/etc/node_exporter/node_exporter" > ++EXEC="/usr/bin/node_exporter" > + LOCKFILE="/var/lock/subsys/$PROG" > +-OPTIONS="--web.listen-address=:9100" > ++ > ++# read configurable OPTIONS > ++. /etc/node_exporter > + > + # Source function library. > + if [ -f /etc/rc.d/init.d/functions ]; then > +@@ -22,18 +24,16 @@ > + echo -n "Starting $PROG: " > + nohup $EXEC $OPTIONS >/dev/null 2>&1 & > + RETVAL=$? > +- [ $RETVAL -eq 0 ] && touch $LOCKFILE && success || failure > +- echo > ++ [ $RETVAL -eq 0 ] && touch $LOCKFILE && echo success || echo failure > + return $RETVAL > + fi > + } > + > + stop() { > + echo -n "Stopping $PROG: " > +- killproc $EXEC > ++ killproc $EXEC > /dev/null > + RETVAL=$? > +- [ $RETVAL -eq 0 ] && rm -r $LOCKFILE && success || failure > +- echo > ++ [ $RETVAL -eq 0 ] && rm -r $LOCKFILE && echo success || echo failure > + } > + > + restart () > +@@ -51,7 +51,7 @@ > + stop > + ;; > + status) > +- status $PROG > ++ statusproc $PROG > + ;; > + restart) > + restart I think it would be good to see if the IPFire initscript template makes sense to use for starting/stopping etc node_exporter rather than patching a file from the source tarball. https://git.ipfire.org/?p=ipfire-2.x.git;a=blob;f=src/initscripts/system/template;h=69dc2a6a2202fb30da61a7fff6625aea531802e9;hb=HEAD Regards, Adolf. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/2] Added new Package node_exporter 2021-05-06 19:46 [PATCH 0/2] Added new Package node_exporter Holger Sunke 2021-05-06 19:46 ` [PATCH 1/2] Added i586/386 support for GO language required for node_exporter Holger Sunke 2021-05-06 19:46 ` [PATCH 2/2] Added new node_exporter package Holger Sunke @ 2021-05-06 20:43 ` Adolf Belka 2021-05-07 18:05 ` Holger Sunke 2 siblings, 1 reply; 17+ messages in thread From: Adolf Belka @ 2021-05-06 20:43 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 2640 bytes --] Hi Holger, Welcome to the development team and thanks for your patch submission. I think that there is some additional information required in this covering note. I think that it would be good to have some additional information about the use case for node_exporter compared to icinga, monit, zabbix_agentd, nagios, etc that already exist as addons in IPFire. What is it that node_exporter brings that cannot be accomplished by those other packages and warrants it being added to the list. Historically many addons have been launched and then shortly afterwards the person who introduced the addon has stopped supporting the maintenance of it with updates, fixes etc. Typically then the package has ended up getting out of date. I believe that the core devs will expect, if the addon is agreed to be a valuable additional package, a longer term commitment from yourself to take on the role of maintainer for the package. It would be good to have that commitment in this covering note. Regards, Adolf. On 06/05/2021 21:46, Holger Sunke wrote: > These patches add the new package node_exporter as discussed in the form thread: > https://community.ipfire.org/t/please-add-prometheus-exporter/3555 > > GO language is required to compile node_exporter. In order to compile > node_exporter for i586 arch, "go" package supported architecture > must be extended for this. > You'll likely want to download packages and adjust DL_FROM variables > in "go" and "node_exporter" LFS scripts. > > Holger Sunke (2): > Added i586/386 support for GO language required for node_exporter. > Added new node_exporter package. > > config/rootfiles/packages/node_exporter | 3 + > lfs/Config | 4 + > lfs/go | 6 +- > lfs/node_exporter | 88 +++++++++++++++++++ > make.sh | 1 + > src/paks/node_exporter/install.sh | 31 +++++++ > src/paks/node_exporter/uninstall.sh | 30 +++++++ > src/paks/node_exporter/update.sh | 27 ++++++ > ..._exporter-configurable-initd-options.patch | 48 ++++++++++ > 9 files changed, 235 insertions(+), 3 deletions(-) > create mode 100644 config/rootfiles/packages/node_exporter > create mode 100644 lfs/node_exporter > create mode 100644 src/paks/node_exporter/install.sh > create mode 100644 src/paks/node_exporter/uninstall.sh > create mode 100644 src/paks/node_exporter/update.sh > create mode 100644 src/patches/node_exporter-configurable-initd-options.patch > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/2] Added new Package node_exporter 2021-05-06 20:43 ` [PATCH 0/2] Added new Package node_exporter Adolf Belka @ 2021-05-07 18:05 ` Holger Sunke 2021-05-24 20:45 ` Robin Roevens 0 siblings, 1 reply; 17+ messages in thread From: Holger Sunke @ 2021-05-07 18:05 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 4829 bytes --] Hello Adolf, the node_exporter provides a simple http download on port 9100 (default) that common measures around the OS runtime in a plain text form like this: http://[firewall]:9100/metrics # HELP go_gc_duration_seconds A summary of the pause duration of garbage collection cycles. # TYPE go_gc_duration_seconds summary go_gc_duration_seconds{quantile="0"} 5.3912e-05 go_gc_duration_seconds{quantile="0.25"} 7.1192e-05 go_gc_duration_seconds{quantile="0.5"} 7.947e-05 go_gc_duration_seconds{quantile="0.75"} 9.8797e-05 go_gc_duration_seconds{quantile="1"} 0.004091312 go_gc_duration_seconds_sum 1.5650559450000001 go_gc_duration_seconds_count 7994 # HELP go_goroutines Number of goroutines that currently exist. # TYPE go_goroutines gauge go_goroutines 8 # HELP go_info Information about the Go environment. # TYPE go_info gauge go_info{version="go1.15.4"} 1 # HELP go_memstats_alloc_bytes Number of bytes allocated and still in use. # TYPE go_memstats_alloc_bytes gauge go_memstats_alloc_bytes 3.542504e+06 # HELP go_memstats_alloc_bytes_total Total number of bytes allocated, even if freed. .... +about 1k additional lines This is useful for those who have a Prometheus instance up and running somewhere in their network that collects these kind of measures from an arbitrary amount of machines. Prometheus then stores these in a time series database and provides easy query access against these data, allowing applications like Grafana simply aggregating and visualizing all them or configuring arbitrary kind of alerts. Summing it up it is very lightweight, simple to integrate but useful only when there's a prometheus runnung for you. You'd not setup a prometheus/grafana stack just because ipfire can run a node_exporter. In this first step, only general OS and IO stats are supported as node_exporter is nativly shipping with. In a later step we can think about adding metrics from log analyzis (number of packets dopped/rejected, number of suspectibles by intrusion detections, ...) or other custom stuff. These would be simply written regularly into a text file (ending with .prom) and placed in some specific local folder on the ipFire file system and would then be picked by node_exporter and simply appended to the http://...:9100/metrics response. Yes, i'd like to maintain this package for the ipfire. I think this would include beside others: - Keep track of and upgrade to new versions - Keep track especially on security alerts - Being reponsive on questions regarding the package - Testing for each supported architecture Kind regards Holger > > I believe that the core devs will expect, if the addon is agreed to be a > valuable additional package, a longer term commitment from yourself to > take on the role of maintainer for the package. It would be good to have > that commitment in this covering note. > > Regards, > > Adolf. > > On 06/05/2021 21:46, Holger Sunke wrote: >> These patches add the new package node_exporter as discussed in the >> form thread: >> https://community.ipfire.org/t/please-add-prometheus-exporter/3555 >> >> GO language is required to compile node_exporter. In order to compile >> node_exporter for i586 arch, "go" package supported architecture >> must be extended for this. >> You'll likely want to download packages and adjust DL_FROM variables >> in "go" and "node_exporter" LFS scripts. >> >> Holger Sunke (2): >> Added i586/386 support for GO language required for node_exporter. >> Added new node_exporter package. >> >> config/rootfiles/packages/node_exporter | 3 + >> lfs/Config | 4 + >> lfs/go | 6 +- >> lfs/node_exporter | 88 +++++++++++++++++++ >> make.sh | 1 + >> src/paks/node_exporter/install.sh | 31 +++++++ >> src/paks/node_exporter/uninstall.sh | 30 +++++++ >> src/paks/node_exporter/update.sh | 27 ++++++ >> ..._exporter-configurable-initd-options.patch | 48 ++++++++++ >> 9 files changed, 235 insertions(+), 3 deletions(-) >> create mode 100644 config/rootfiles/packages/node_exporter >> create mode 100644 lfs/node_exporter >> create mode 100644 src/paks/node_exporter/install.sh >> create mode 100644 src/paks/node_exporter/uninstall.sh >> create mode 100644 src/paks/node_exporter/update.sh >> create mode 100644 >> src/patches/node_exporter-configurable-initd-options.patch >> ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/2] Added new Package node_exporter 2021-05-07 18:05 ` Holger Sunke @ 2021-05-24 20:45 ` Robin Roevens 0 siblings, 0 replies; 17+ messages in thread From: Robin Roevens @ 2021-05-24 20:45 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 5550 bytes --] Hi all I wanted to add that Zabbix server can also interpret Prometheus format out-of-the-box, so installing node_exporter on IPFire could provide a possibly more light-weight alternative to installing zabbix_agentd for monitoring IPFire with Zabbix (however already quite light-weight). Or an addition as both will probably have different capabilities and possibilities...Zabbix can fetch info from both. Regards Robin Holger Sunke schreef op vr 07-05-2021 om 18:05 [+0000]: > Hello Adolf, > > the node_exporter provides a simple http download on port 9100 > (default) > that common measures around the OS runtime in a plain text form like > this: > > http://[firewall]:9100/metrics > > # HELP go_gc_duration_seconds A summary of the pause duration of > garbage > collection cycles. > # TYPE go_gc_duration_seconds summary > go_gc_duration_seconds{quantile="0"} 5.3912e-05 > go_gc_duration_seconds{quantile="0.25"} 7.1192e-05 > go_gc_duration_seconds{quantile="0.5"} 7.947e-05 > go_gc_duration_seconds{quantile="0.75"} 9.8797e-05 > go_gc_duration_seconds{quantile="1"} 0.004091312 > go_gc_duration_seconds_sum 1.5650559450000001 > go_gc_duration_seconds_count 7994 > # HELP go_goroutines Number of goroutines that currently exist. > # TYPE go_goroutines gauge > go_goroutines 8 > # HELP go_info Information about the Go environment. > # TYPE go_info gauge > go_info{version="go1.15.4"} 1 > # HELP go_memstats_alloc_bytes Number of bytes allocated and still in > use. > # TYPE go_memstats_alloc_bytes gauge > go_memstats_alloc_bytes 3.542504e+06 > even if freed. > .... > +about 1k additional lines > > This is useful for those who have a Prometheus instance up and > running > somewhere in their network that collects these kind of measures from > an > arbitrary amount of machines. Prometheus then stores these in a time > series database and provides easy query access against these data, > all them or configuring arbitrary kind of alerts. > > Summing it up it is very lightweight, simple to integrate but useful > only when there's a prometheus runnung for you. You'd not setup a > prometheus/grafana stack just because ipfire can run a node_exporter. > > > In this first step, only general OS and IO stats are supported as > node_exporter is nativly shipping with. In a later step we can think > about adding metrics from log analyzis (number of packets > dopped/rejected, number of suspectibles by intrusion detections, ...) > or > other custom stuff. > .prom) and placed in some specific local folder on the ipFire file > system and would then be picked by node_exporter and simply appended > to > the http://...:9100/metrics response. > > Yes, i'd like to maintain this package for the ipfire. I think this > would include beside others: > - Keep track of and upgrade to new versions > - Keep track especially on security alerts > - Being reponsive on questions regarding the package > - Testing for each supported architecture > > > Kind regards > > Holger > > > > > I believe that the core devs will expect, if the addon is agreed to > > be a > > valuable additional package, a longer term commitment from yourself > > to > > take on the role of maintainer for the package. It would be good to > > have > > that commitment in this covering note. > > > > Regards, > > > > Adolf. > > > > On 06/05/2021 21:46, Holger Sunke wrote: > > > These patches add the new package node_exporter as discussed in > > > the > > > form thread: > > > https://community.ipfire.org/t/please-add-prometheus-exporter/3555 > > > > > > GO language is required to compile node_exporter. In order to > > > compile > > > node_exporter for i586 arch, "go" package supported architecture > > > must be extended for this. > > > You'll likely want to download packages and adjust DL_FROM > > > variables > > > in "go" and "node_exporter" LFS scripts. > > > > > > Holger Sunke (2): > > > Added i586/386 support for GO language required for > > > node_exporter. > > > Added new node_exporter package. > > > > > > config/rootfiles/packages/node_exporter | 3 + > > > lfs/Config | 4 + > > > lfs/go | 6 +- > > > lfs/node_exporter | 88 > > > +++++++++++++++++++ > > > make.sh | 1 + > > > src/paks/node_exporter/install.sh | 31 +++++++ > > > src/paks/node_exporter/uninstall.sh | 30 +++++++ > > > src/paks/node_exporter/update.sh | 27 ++++++ > > > ..._exporter-configurable-initd-options.patch | 48 ++++++++++ > > > 9 files changed, 235 insertions(+), 3 deletions(-) > > > create mode 100644 config/rootfiles/packages/node_exporter > > > create mode 100644 lfs/node_exporter > > > create mode 100644 src/paks/node_exporter/install.sh > > > create mode 100644 src/paks/node_exporter/uninstall.sh > > > create mode 100644 src/paks/node_exporter/update.sh > > > create mode 100644 > > > src/patches/node_exporter-configurable-initd-options.patch > > > > -- Dit bericht is gescanned op virussen en andere gevaarlijke inhoud door MailScanner en lijkt schoon te zijn. ^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 0/2] Reworked patches introducing node_exporter on master branch
@ 2021-06-06 17:48 Holger Sunke
2021-06-06 17:48 ` [PATCH 2/2] Added new node_exporter package Holger Sunke
0 siblings, 1 reply; 17+ messages in thread
From: Holger Sunke @ 2021-06-06 17:48 UTC (permalink / raw)
To: development
[-- Attachment #1: Type: text/plain, Size: 2074 bytes --]
These are reworked patches on top of [master] that modify the [go] package to be downloaded
for all supported architectures and introduce the new package [node_exporter], which requires [go]
during compilation.
node_exporter generally provides a number of runtime related metrics through a lightweight HTTP plain text interface that can be
scraped by time series databases in regular interval. These metrics can then be used in grapical UIs for monitoring, analyzation and alerting.
It is of use for users already monitoring their machines this way and just are about to add their ipfire nodes into the monitoring stack.
These patches replace my previous patches from 06/05/2021 21:46:
"[PATCH 0/2] Added new Package node_exporter",
"[PATCH 1/2] Added i586/386 support for GO language required for node_exporter.",
"[PATCH 2/2] Added new node_exporter package."
Holger Sunke (2):
Added x86_64 i586 aarch64 armv5tel support for GO language required
for node_exporter compilation.
Added new node_exporter package.
config/node_exporter/node_exporter_options | 203 +++++++++++++++++++++
config/rootfiles/packages/node_exporter | 3 +
lfs/Config | 8 +
lfs/go | 9 +-
lfs/node_exporter | 94 ++++++++++
make.sh | 1 +
src/initscripts/packages/node_exporter | 42 +++++
src/paks/node_exporter/install.sh | 31 ++++
src/paks/node_exporter/uninstall.sh | 30 +++
src/paks/node_exporter/update.sh | 27 +++
10 files changed, 445 insertions(+), 3 deletions(-)
create mode 100644 config/node_exporter/node_exporter_options
create mode 100644 config/rootfiles/packages/node_exporter
create mode 100644 lfs/node_exporter
create mode 100644 src/initscripts/packages/node_exporter
create mode 100644 src/paks/node_exporter/install.sh
create mode 100644 src/paks/node_exporter/uninstall.sh
create mode 100644 src/paks/node_exporter/update.sh
--
2.30.2
^ permalink raw reply [flat|nested] 17+ messages in thread* [PATCH 2/2] Added new node_exporter package. 2021-06-06 17:48 [PATCH 0/2] Reworked patches introducing node_exporter on master branch Holger Sunke @ 2021-06-06 17:48 ` Holger Sunke 2021-06-08 16:56 ` Michael Tremer 0 siblings, 1 reply; 17+ messages in thread From: Holger Sunke @ 2021-06-06 17:48 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 26559 bytes --] --- config/node_exporter/node_exporter_options | 203 +++++++++++++++++++++ config/rootfiles/packages/node_exporter | 3 + lfs/node_exporter | 94 ++++++++++ make.sh | 1 + src/initscripts/packages/node_exporter | 42 +++++ src/paks/node_exporter/install.sh | 31 ++++ src/paks/node_exporter/uninstall.sh | 30 +++ src/paks/node_exporter/update.sh | 27 +++ 8 files changed, 431 insertions(+) create mode 100644 config/node_exporter/node_exporter_options create mode 100644 config/rootfiles/packages/node_exporter create mode 100644 lfs/node_exporter create mode 100644 src/initscripts/packages/node_exporter create mode 100644 src/paks/node_exporter/install.sh create mode 100644 src/paks/node_exporter/uninstall.sh create mode 100644 src/paks/node_exporter/update.sh diff --git a/config/node_exporter/node_exporter_options b/config/node_exporter/node_exporter_options new file mode 100644 index 000000000..f614b1102 --- /dev/null +++ b/config/node_exporter/node_exporter_options @@ -0,0 +1,203 @@ +# Customize node_exporter startup command line flags by editing OPTIONS below: + +export OPTIONS="--web.listen-address=:9100" + +#Flags: +# -h, --help Show context-sensitive help (also try +# --help-long and --help-man). +# --collector.bcache.priorityStats +# Expose expensive priority stats. +# --collector.cpu.info Enables metric cpu_info +# --collector.cpu.info.flags-include=COLLECTOR.CPU.INFO.FLAGS-INCLUDE +# Filter the `flags` field in cpuInfo with a +# value that must be a regular expression +# --collector.cpu.info.bugs-include=COLLECTOR.CPU.INFO.BUGS-INCLUDE +# Filter the `bugs` field in cpuInfo with a value +# that must be a regular expression +# --collector.diskstats.ignored-devices="^(ram|loop|fd|(h|s|v|xv)d[a-z]|nvme\\d+n\\d+p)\\d+$" +# Regexp of devices to ignore for diskstats. +# --collector.filesystem.ignored-mount-points="^/(dev|proc|sys|var/lib/docker/.+)($|/)" +# Regexp of mount points to ignore for filesystem +# collector. +# --collector.filesystem.ignored-fs-types="^(autofs|binfmt_misc|bpf|cgroup2?|configfs|debugfs|devpts|devtmpfs|fusectl|hugetlbfs|iso9660|mqueue|nsfs|overlay|proc|procfs|pstore|rpc_pipefs|securityfs|selinuxfs|squashfs|sysfs|tracefs)$" +# Regexp of filesystem types to ignore for +# filesystem collector. +# --collector.ipvs.backend-labels="local_address,local_port,remote_address,remote_port,proto,local_mark" +# Comma separated list for IPVS backend stats +# labels. +# --collector.netclass.ignored-devices="^$" +# Regexp of net devices to ignore for netclass +# collector. +# --collector.netdev.device-include=COLLECTOR.NETDEV.DEVICE-INCLUDE +# Regexp of net devices to include (mutually +# exclusive to device-exclude). +# --collector.netdev.device-exclude=COLLECTOR.NETDEV.DEVICE-EXCLUDE +# Regexp of net devices to exclude (mutually +# exclusive to device-include). +# --collector.netstat.fields="^(.*_(InErrors|InErrs)|Ip_Forwarding|Ip(6|Ext)_(InOctets|OutOctets)|Icmp6?_(InMsgs|OutMsgs)|TcpExt_(Listen.*|Syncookies.*|TCPSynRetrans)|Tcp_(ActiveOpens|InSegs|OutSegs|OutRsts|PassiveOpens|RetransSegs|CurrEstab)|Udp6?_(InDatagrams|OutDatagrams|NoPorts|RcvbufErrors|SndbufErrors))$" +# Regexp of fields to return for netstat +# collector. +# --collector.ntp.server="127.0.0.1" +# NTP server to use for ntp collector +# --collector.ntp.protocol-version=4 +# NTP protocol version +# --collector.ntp.server-is-local +# Certify that collector.ntp.server address is +# not a public ntp server +# --collector.ntp.ip-ttl=1 IP TTL to use while sending NTP query +# --collector.ntp.max-distance=3.46608s +# Max accumulated distance to the root +# --collector.ntp.local-offset-tolerance=1ms +# Offset between local clock and local ntpd time +# to tolerate +# --path.procfs="/proc" procfs mountpoint. +# --path.sysfs="/sys" sysfs mountpoint. +# --path.rootfs="/" rootfs mountpoint. +# --collector.perf.cpus="" List of CPUs from which perf metrics should be +# collected +# --collector.perf.tracepoint=COLLECTOR.PERF.TRACEPOINT ... +# perf tracepoint that should be collected +# --collector.powersupply.ignored-supplies="^$" +# Regexp of power supplies to ignore for +# powersupplyclass collector. +# --collector.qdisc.fixtures="" +# test fixtures to use for qdisc collector +# end-to-end testing +# --collector.runit.servicedir="/etc/service" +# Path to runit service directory. +# --collector.supervisord.url="http://localhost:9001/RPC2" +# XML RPC endpoint. +# --collector.systemd.unit-include=".+" +# Regexp of systemd units to include. Units must +# both match include and not match exclude to be +# included. +# --collector.systemd.unit-exclude=".+\\.(automount|device|mount|scope|slice)" +# Regexp of systemd units to exclude. Units must +# both match include and not match exclude to be +# included. +# --collector.systemd.enable-task-metrics +# Enables service unit tasks metrics +# unit_tasks_current and unit_tasks_max +# --collector.systemd.enable-restarts-metrics +# Enables service unit metric +# service_restart_total +# --collector.systemd.enable-start-time-metrics +# Enables service unit metric +# unit_start_time_seconds +# --collector.textfile.directory="" +# Directory to read text files with metrics from. +# --collector.vmstat.fields="^(oom_kill|pgpg|pswp|pg.*fault).*" +# Regexp of fields to return for vmstat +# collector. +# --collector.wifi.fixtures="" +# test fixtures to use for wifi collector metrics +# --collector.arp Enable the arp collector (default: enabled). +# --collector.bcache Enable the bcache collector (default: enabled). +# --collector.bonding Enable the bonding collector (default: +# enabled). +# --collector.btrfs Enable the btrfs collector (default: enabled). +# --collector.buddyinfo Enable the buddyinfo collector (default: +# disabled). +# --collector.conntrack Enable the conntrack collector (default: +# enabled). +# --collector.cpu Enable the cpu collector (default: enabled). +# --collector.cpufreq Enable the cpufreq collector (default: +# enabled). +# --collector.diskstats Enable the diskstats collector (default: +# enabled). +# --collector.drbd Enable the drbd collector (default: disabled). +# --collector.edac Enable the edac collector (default: enabled). +# --collector.entropy Enable the entropy collector (default: +# enabled). +# --collector.fibrechannel Enable the fibrechannel collector (default: +# enabled). +# --collector.filefd Enable the filefd collector (default: enabled). +# --collector.filesystem Enable the filesystem collector (default: +# enabled). +# --collector.hwmon Enable the hwmon collector (default: enabled). +# --collector.infiniband Enable the infiniband collector (default: +# enabled). +# --collector.interrupts Enable the interrupts collector (default: +# disabled). +# --collector.ipvs Enable the ipvs collector (default: enabled). +# --collector.ksmd Enable the ksmd collector (default: disabled). +# --collector.loadavg Enable the loadavg collector (default: +# enabled). +# --collector.logind Enable the logind collector (default: +# disabled). +# --collector.mdadm Enable the mdadm collector (default: enabled). +# --collector.meminfo Enable the meminfo collector (default: +# enabled). +# --collector.meminfo_numa Enable the meminfo_numa collector (default: +# disabled). +# --collector.mountstats Enable the mountstats collector (default: +# disabled). +# --collector.netclass Enable the netclass collector (default: +# enabled). +# --collector.netdev Enable the netdev collector (default: enabled). +# --collector.netstat Enable the netstat collector (default: +# enabled). +# --collector.network_route Enable the network_route collector (default: +# disabled). +# --collector.nfs Enable the nfs collector (default: enabled). +# --collector.nfsd Enable the nfsd collector (default: enabled). +# --collector.ntp Enable the ntp collector (default: disabled). +# --collector.perf Enable the perf collector (default: disabled). +# --collector.powersupplyclass +# Enable the powersupplyclass collector (default: +# enabled). +# --collector.pressure Enable the pressure collector (default: +# enabled). +# --collector.processes Enable the processes collector (default: +# disabled). +# --collector.qdisc Enable the qdisc collector (default: disabled). +# --collector.rapl Enable the rapl collector (default: enabled). +# --collector.runit Enable the runit collector (default: disabled). +# --collector.schedstat Enable the schedstat collector (default: +# enabled). +# --collector.sockstat Enable the sockstat collector (default: +# enabled). +# --collector.softnet Enable the softnet collector (default: +# enabled). +# --collector.stat Enable the stat collector (default: enabled). +# --collector.supervisord Enable the supervisord collector (default: +# disabled). +# --collector.systemd Enable the systemd collector (default: +# disabled). +# --collector.tcpstat Enable the tcpstat collector (default: +# disabled). +# --collector.textfile Enable the textfile collector (default: +# enabled). +# --collector.thermal_zone Enable the thermal_zone collector (default: +# enabled). +# --collector.time Enable the time collector (default: enabled). +# --collector.timex Enable the timex collector (default: enabled). +# --collector.udp_queues Enable the udp_queues collector (default: +# enabled). +# --collector.uname Enable the uname collector (default: enabled). +# --collector.vmstat Enable the vmstat collector (default: enabled). +# --collector.wifi Enable the wifi collector (default: disabled). +# --collector.xfs Enable the xfs collector (default: enabled). +# --collector.zfs Enable the zfs collector (default: enabled). +# --collector.zoneinfo Enable the zoneinfo collector (default: +# disabled). +# --web.listen-address=":9100" +# Address on which to expose metrics and web +# interface. +# --web.telemetry-path="/metrics" +# Path under which to expose metrics. +# --web.disable-exporter-metrics +# Exclude metrics about the exporter itself +# (promhttp_*, process_*, go_*). +# --web.max-requests=40 Maximum number of parallel scrape requests. Use +# 0 to disable. +# --collector.disable-defaults +# Set all collectors to disabled by default. +# --web.config="" [EXPERIMENTAL] Path to config yaml file that +# can enable TLS or authentication. +# --log.level=info Only log messages with the given severity or +# above. One of: [debug, info, warn, error] +# --log.format=logfmt Output format of log messages. One of: [logfmt, +# json] +# --version Show application version. + diff --git a/config/rootfiles/packages/node_exporter b/config/rootfiles/packages/node_exporter new file mode 100644 index 000000000..994c8365b --- /dev/null +++ b/config/rootfiles/packages/node_exporter @@ -0,0 +1,3 @@ +usr/bin/node_exporter +etc/node_exporter_options +etc/rc.d/init.d/node_exporter diff --git a/lfs/node_exporter b/lfs/node_exporter new file mode 100644 index 000000000..942816754 --- /dev/null +++ b/lfs/node_exporter @@ -0,0 +1,94 @@ +############################################################################## +# # +# IPFire.org - A linux based firewall # +# Copyright (C) 2007 Michael Tremer & Christian Schmidt # +# # +# This program is free software: you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation, either version 3 of the License, or # +# (at your option) any later version. # +# # +# This program is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with this program. If not, see <http://www.gnu.org/licenses/>. # +# # +############################################################################### + +############################################################################### +# Definitions +############################################################################### + +include Config + +VER = 1.1.2 + +THISAPP = node_exporter-$(VER) +DL_FILE = $(THISAPP).tar.gz +DL_FROM = https://github.com/prometheus/node_exporter/archive/v$(VER)/ +DIR_APP = $(DIR_SRC)/$(THISAPP) +TARGET = $(DIR_INFO)/$(THISAPP) +SUP_ARCH = x86_64 i586 aarch64 armv5tel +PROG = node_exporter +PAK_VER = 1 + +DEPS = "" + +############################################################################### +# Top-level Rules +############################################################################### + +objects = $(DL_FILE) + +$(DL_FILE) = $(DL_FROM)/$(DL_FILE) + +$(DL_FILE)_MD5 = 33c2be846dbd502f9c0efab149a8cbc5 + +install : $(TARGET) +check : $(patsubst %,$(DIR_CHK)/%,$(objects)) + +download : $(patsubst %,$(DIR_DL)/%,$(objects)) + +md5 : $(subst %,%_MD5,$(objects)) + +dist : + @$(PAK) + +############################################################################### +# Downloading, checking, md5sum +############################################################################### + +$(patsubst %,$(DIR_CHK)/%,$(objects)) : + @$(CHECK) + +$(patsubst %,$(DIR_DL)/%,$(objects)) : + @$(LOAD) + +$(subst %,%_MD5,$(objects)) : + @$(MD5) + +############################################################################### +# Installation Details +############################################################################### + +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) + @$(PREBUILD) + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) + cd $(DIR_APP) && make build $(MAKETUNING) $(EXTRA_MAKE) + + # install compiled binary + cd $(DIR_APP) && cp node_exporter /usr/bin + + # install configuration file + install -v -m 644 $(DIR_SRC)/config/node_exporter/node_exporter_options \ + /etc/node_exporter_options + + # Install initscript + $(call INSTALL_INITSCRIPT,node_exporter) + + @rm -rf $(DIR_APP) + @$(POSTBUILD) + diff --git a/make.sh b/make.sh index 4af0081e9..671f15558 100755 --- a/make.sh +++ b/make.sh @@ -1632,6 +1632,7 @@ buildipfire() { lfsmake2 socat lfsmake2 libcdada lfsmake2 pmacct + lfsmake2 node_exporter } buildinstaller() { diff --git a/src/initscripts/packages/node_exporter b/src/initscripts/packages/node_exporter new file mode 100644 index 000000000..b9cbc6ab9 --- /dev/null +++ b/src/initscripts/packages/node_exporter @@ -0,0 +1,42 @@ +#!/bin/sh +######################################################################## +# Begin $rc_base/init.d/ +# +# Description : Prometheus Node Exporter daemon +# +######################################################################## + +. /etc/sysconfig/rc +. ${rc_functions} + +# read configurable OPTIONS +. /etc/node_exporter_options + +case "${1}" in + start) + boot_mesg "Starting..." + loadproc /usr/bin/node_exporter $OPTIONS > /dev/null 2>&1 & + ;; + + stop) + boot_mesg "Stopping..." + killproc /usr/bin/node_exporter + ;; + + restart) + ${0} stop + sleep 1 + ${0} start + ;; + + status) + statusproc /usr/bin/node_exporter + ;; + + *) + echo "Usage: ${0} {start|stop|restart|status}" + exit 1 + ;; +esac + +# End $rc_base/init.d/ diff --git a/src/paks/node_exporter/install.sh b/src/paks/node_exporter/install.sh new file mode 100644 index 000000000..e9272d7cb --- /dev/null +++ b/src/paks/node_exporter/install.sh @@ -0,0 +1,31 @@ +#!/bin/bash +############################################################################ +# # +# This file is part of the IPFire Firewall. # +# # +# IPFire is free software; you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation; either version 2 of the License, or # +# (at your option) any later version. # +# # +# IPFire is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with IPFire; if not, write to the Free Software # +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # +# # +# Copyright (C) 2007 IPFire-Team <info(a)ipfire.org>. # +# # +############################################################################ +# +. /opt/pakfire/lib/functions.sh +extract_files +restore_backup ${NAME} +start_service --background ${NAME} + +ln -svf ../init.d/node_exporter /etc/rc.d/rc0.d/K30node_exporter +ln -svf ../init.d/node_exporter /etc/rc.d/rc3.d/S40node_exporter +ln -svf ../init.d/node_exporter /etc/rc.d/rc6.d/K30node_exporter diff --git a/src/paks/node_exporter/uninstall.sh b/src/paks/node_exporter/uninstall.sh new file mode 100644 index 000000000..710baf8b4 --- /dev/null +++ b/src/paks/node_exporter/uninstall.sh @@ -0,0 +1,30 @@ +#!/bin/bash +############################################################################ +# # +# This file is part of the IPFire Firewall. # +# # +# IPFire is free software; you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation; either version 2 of the License, or # +# (at your option) any later version. # +# # +# IPFire is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with IPFire; if not, write to the Free Software # +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # +# # +# Copyright (C) 2007 IPFire-Team <info(a)ipfire.org>. # +# # +############################################################################ +# +. /opt/pakfire/lib/functions.sh +/etc/init.d/node_exporter stop +make_backup ${NAME} +remove_files + +rm -rfv /etc/rc.d/rc*.d/*node_exporter + diff --git a/src/paks/node_exporter/update.sh b/src/paks/node_exporter/update.sh new file mode 100644 index 000000000..99776659c --- /dev/null +++ b/src/paks/node_exporter/update.sh @@ -0,0 +1,27 @@ +#!/bin/bash +############################################################################ +# # +# This file is part of the IPFire Firewall. # +# # +# IPFire is free software; you can redistribute it and/or modify # +# it under the terms of the GNU General Public License as published by # +# the Free Software Foundation; either version 2 of the License, or # +# (at your option) any later version. # +# # +# IPFire is distributed in the hope that it will be useful, # +# but WITHOUT ANY WARRANTY; without even the implied warranty of # +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # +# GNU General Public License for more details. # +# # +# You should have received a copy of the GNU General Public License # +# along with IPFire; if not, write to the Free Software # +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # +# # +# Copyright (C) 2007-2020 IPFire-Team <info(a)ipfire.org>. # +# # +############################################################################ +# +. /opt/pakfire/lib/functions.sh +extract_backup_includes +./uninstall.sh +./install.sh -- 2.30.2 ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/2] Added new node_exporter package. 2021-06-06 17:48 ` [PATCH 2/2] Added new node_exporter package Holger Sunke @ 2021-06-08 16:56 ` Michael Tremer 2021-06-09 6:14 ` Holger Sunke 0 siblings, 1 reply; 17+ messages in thread From: Michael Tremer @ 2021-06-08 16:56 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 27946 bytes --] Hello, This looks quite good, too. Just a minor detail below... > On 6 Jun 2021, at 18:48, Holger Sunke <holger.sunke(a)posteo.de> wrote: > > --- > config/node_exporter/node_exporter_options | 203 +++++++++++++++++++++ > config/rootfiles/packages/node_exporter | 3 + > lfs/node_exporter | 94 ++++++++++ > make.sh | 1 + > src/initscripts/packages/node_exporter | 42 +++++ > src/paks/node_exporter/install.sh | 31 ++++ > src/paks/node_exporter/uninstall.sh | 30 +++ > src/paks/node_exporter/update.sh | 27 +++ > 8 files changed, 431 insertions(+) > create mode 100644 config/node_exporter/node_exporter_options > create mode 100644 config/rootfiles/packages/node_exporter > create mode 100644 lfs/node_exporter > create mode 100644 src/initscripts/packages/node_exporter > create mode 100644 src/paks/node_exporter/install.sh > create mode 100644 src/paks/node_exporter/uninstall.sh > create mode 100644 src/paks/node_exporter/update.sh > > diff --git a/config/node_exporter/node_exporter_options b/config/node_exporter/node_exporter_options > new file mode 100644 > index 000000000..f614b1102 > --- /dev/null > +++ b/config/node_exporter/node_exporter_options > @@ -0,0 +1,203 @@ > +# Customize node_exporter startup command line flags by editing OPTIONS below: > + > +export OPTIONS="--web.listen-address=:9100" > + > +#Flags: > +# -h, --help Show context-sensitive help (also try > +# --help-long and --help-man). > +# --collector.bcache.priorityStats > +# Expose expensive priority stats. > +# --collector.cpu.info Enables metric cpu_info > +# --collector.cpu.info.flags-include=COLLECTOR.CPU.INFO.FLAGS-INCLUDE > +# Filter the `flags` field in cpuInfo with a > +# value that must be a regular expression > +# --collector.cpu.info.bugs-include=COLLECTOR.CPU.INFO.BUGS-INCLUDE > +# Filter the `bugs` field in cpuInfo with a value > +# that must be a regular expression > +# --collector.diskstats.ignored-devices="^(ram|loop|fd|(h|s|v|xv)d[a-z]|nvme\\d+n\\d+p)\\d+$" > +# Regexp of devices to ignore for diskstats. > +# --collector.filesystem.ignored-mount-points="^/(dev|proc|sys|var/lib/docker/.+)($|/)" > +# Regexp of mount points to ignore for filesystem > +# collector. > +# --collector.filesystem.ignored-fs-types="^(autofs|binfmt_misc|bpf|cgroup2?|configfs|debugfs|devpts|devtmpfs|fusectl|hugetlbfs|iso9660|mqueue|nsfs|overlay|proc|procfs|pstore|rpc_pipefs|securityfs|selinuxfs|squashfs|sysfs|tracefs)$" > +# Regexp of filesystem types to ignore for > +# filesystem collector. > +# --collector.ipvs.backend-labels="local_address,local_port,remote_address,remote_port,proto,local_mark" > +# Comma separated list for IPVS backend stats > +# labels. > +# --collector.netclass.ignored-devices="^$" > +# Regexp of net devices to ignore for netclass > +# collector. > +# --collector.netdev.device-include=COLLECTOR.NETDEV.DEVICE-INCLUDE > +# Regexp of net devices to include (mutually > +# exclusive to device-exclude). > +# --collector.netdev.device-exclude=COLLECTOR.NETDEV.DEVICE-EXCLUDE > +# Regexp of net devices to exclude (mutually > +# exclusive to device-include). > +# --collector.netstat.fields="^(.*_(InErrors|InErrs)|Ip_Forwarding|Ip(6|Ext)_(InOctets|OutOctets)|Icmp6?_(InMsgs|OutMsgs)|TcpExt_(Listen.*|Syncookies.*|TCPSynRetrans)|Tcp_(ActiveOpens|InSegs|OutSegs|OutRsts|PassiveOpens|RetransSegs|CurrEstab)|Udp6?_(InDatagrams|OutDatagrams|NoPorts|RcvbufErrors|SndbufErrors))$" > +# Regexp of fields to return for netstat > +# collector. > +# --collector.ntp.server="127.0.0.1" > +# NTP server to use for ntp collector > +# --collector.ntp.protocol-version=4 > +# NTP protocol version > +# --collector.ntp.server-is-local > +# Certify that collector.ntp.server address is > +# not a public ntp server > +# --collector.ntp.ip-ttl=1 IP TTL to use while sending NTP query > +# --collector.ntp.max-distance=3.46608s > +# Max accumulated distance to the root > +# --collector.ntp.local-offset-tolerance=1ms > +# Offset between local clock and local ntpd time > +# to tolerate > +# --path.procfs="/proc" procfs mountpoint. > +# --path.sysfs="/sys" sysfs mountpoint. > +# --path.rootfs="/" rootfs mountpoint. > +# --collector.perf.cpus="" List of CPUs from which perf metrics should be > +# collected > +# --collector.perf.tracepoint=COLLECTOR.PERF.TRACEPOINT ... > +# perf tracepoint that should be collected > +# --collector.powersupply.ignored-supplies="^$" > +# Regexp of power supplies to ignore for > +# powersupplyclass collector. > +# --collector.qdisc.fixtures="" > +# test fixtures to use for qdisc collector > +# end-to-end testing > +# --collector.runit.servicedir="/etc/service" > +# Path to runit service directory. > +# --collector.supervisord.url="http://localhost:9001/RPC2" > +# XML RPC endpoint. > +# --collector.systemd.unit-include=".+" > +# Regexp of systemd units to include. Units must > +# both match include and not match exclude to be > +# included. > +# --collector.systemd.unit-exclude=".+\\.(automount|device|mount|scope|slice)" > +# Regexp of systemd units to exclude. Units must > +# both match include and not match exclude to be > +# included. > +# --collector.systemd.enable-task-metrics > +# Enables service unit tasks metrics > +# unit_tasks_current and unit_tasks_max > +# --collector.systemd.enable-restarts-metrics > +# Enables service unit metric > +# service_restart_total > +# --collector.systemd.enable-start-time-metrics > +# Enables service unit metric > +# unit_start_time_seconds > +# --collector.textfile.directory="" > +# Directory to read text files with metrics from. > +# --collector.vmstat.fields="^(oom_kill|pgpg|pswp|pg.*fault).*" > +# Regexp of fields to return for vmstat > +# collector. > +# --collector.wifi.fixtures="" > +# test fixtures to use for wifi collector metrics > +# --collector.arp Enable the arp collector (default: enabled). > +# --collector.bcache Enable the bcache collector (default: enabled). > +# --collector.bonding Enable the bonding collector (default: > +# enabled). > +# --collector.btrfs Enable the btrfs collector (default: enabled). > +# --collector.buddyinfo Enable the buddyinfo collector (default: > +# disabled). > +# --collector.conntrack Enable the conntrack collector (default: > +# enabled). > +# --collector.cpu Enable the cpu collector (default: enabled). > +# --collector.cpufreq Enable the cpufreq collector (default: > +# enabled). > +# --collector.diskstats Enable the diskstats collector (default: > +# enabled). > +# --collector.drbd Enable the drbd collector (default: disabled). > +# --collector.edac Enable the edac collector (default: enabled). > +# --collector.entropy Enable the entropy collector (default: > +# enabled). > +# --collector.fibrechannel Enable the fibrechannel collector (default: > +# enabled). > +# --collector.filefd Enable the filefd collector (default: enabled). > +# --collector.filesystem Enable the filesystem collector (default: > +# enabled). > +# --collector.hwmon Enable the hwmon collector (default: enabled). > +# --collector.infiniband Enable the infiniband collector (default: > +# enabled). > +# --collector.interrupts Enable the interrupts collector (default: > +# disabled). > +# --collector.ipvs Enable the ipvs collector (default: enabled). > +# --collector.ksmd Enable the ksmd collector (default: disabled). > +# --collector.loadavg Enable the loadavg collector (default: > +# enabled). > +# --collector.logind Enable the logind collector (default: > +# disabled). > +# --collector.mdadm Enable the mdadm collector (default: enabled). > +# --collector.meminfo Enable the meminfo collector (default: > +# enabled). > +# --collector.meminfo_numa Enable the meminfo_numa collector (default: > +# disabled). > +# --collector.mountstats Enable the mountstats collector (default: > +# disabled). > +# --collector.netclass Enable the netclass collector (default: > +# enabled). > +# --collector.netdev Enable the netdev collector (default: enabled). > +# --collector.netstat Enable the netstat collector (default: > +# enabled). > +# --collector.network_route Enable the network_route collector (default: > +# disabled). > +# --collector.nfs Enable the nfs collector (default: enabled). > +# --collector.nfsd Enable the nfsd collector (default: enabled). > +# --collector.ntp Enable the ntp collector (default: disabled). > +# --collector.perf Enable the perf collector (default: disabled). > +# --collector.powersupplyclass > +# Enable the powersupplyclass collector (default: > +# enabled). > +# --collector.pressure Enable the pressure collector (default: > +# enabled). > +# --collector.processes Enable the processes collector (default: > +# disabled). > +# --collector.qdisc Enable the qdisc collector (default: disabled). > +# --collector.rapl Enable the rapl collector (default: enabled). > +# --collector.runit Enable the runit collector (default: disabled). > +# --collector.schedstat Enable the schedstat collector (default: > +# enabled). > +# --collector.sockstat Enable the sockstat collector (default: > +# enabled). > +# --collector.softnet Enable the softnet collector (default: > +# enabled). > +# --collector.stat Enable the stat collector (default: enabled). > +# --collector.supervisord Enable the supervisord collector (default: > +# disabled). > +# --collector.systemd Enable the systemd collector (default: > +# disabled). > +# --collector.tcpstat Enable the tcpstat collector (default: > +# disabled). > +# --collector.textfile Enable the textfile collector (default: > +# enabled). > +# --collector.thermal_zone Enable the thermal_zone collector (default: > +# enabled). > +# --collector.time Enable the time collector (default: enabled). > +# --collector.timex Enable the timex collector (default: enabled). > +# --collector.udp_queues Enable the udp_queues collector (default: > +# enabled). > +# --collector.uname Enable the uname collector (default: enabled). > +# --collector.vmstat Enable the vmstat collector (default: enabled). > +# --collector.wifi Enable the wifi collector (default: disabled). > +# --collector.xfs Enable the xfs collector (default: enabled). > +# --collector.zfs Enable the zfs collector (default: enabled). > +# --collector.zoneinfo Enable the zoneinfo collector (default: > +# disabled). > +# --web.listen-address=":9100" > +# Address on which to expose metrics and web > +# interface. > +# --web.telemetry-path="/metrics" > +# Path under which to expose metrics. > +# --web.disable-exporter-metrics > +# Exclude metrics about the exporter itself > +# (promhttp_*, process_*, go_*). > +# --web.max-requests=40 Maximum number of parallel scrape requests. Use > +# 0 to disable. > +# --collector.disable-defaults > +# Set all collectors to disabled by default. > +# --web.config="" [EXPERIMENTAL] Path to config yaml file that > +# can enable TLS or authentication. > +# --log.level=info Only log messages with the given severity or > +# above. One of: [debug, info, warn, error] > +# --log.format=logfmt Output format of log messages. One of: [logfmt, > +# json] > +# --version Show application version. > + > diff --git a/config/rootfiles/packages/node_exporter b/config/rootfiles/packages/node_exporter > new file mode 100644 > index 000000000..994c8365b > --- /dev/null > +++ b/config/rootfiles/packages/node_exporter > @@ -0,0 +1,3 @@ > +usr/bin/node_exporter > +etc/node_exporter_options > +etc/rc.d/init.d/node_exporter > diff --git a/lfs/node_exporter b/lfs/node_exporter > new file mode 100644 > index 000000000..942816754 > --- /dev/null > +++ b/lfs/node_exporter > @@ -0,0 +1,94 @@ > +############################################################################## > +# # > +# IPFire.org - A linux based firewall # > +# Copyright (C) 2007 Michael Tremer & Christian Schmidt # > +# # > +# This program is free software: you can redistribute it and/or modify # > +# it under the terms of the GNU General Public License as published by # > +# the Free Software Foundation, either version 3 of the License, or # > +# (at your option) any later version. # > +# # > +# This program is distributed in the hope that it will be useful, # > +# but WITHOUT ANY WARRANTY; without even the implied warranty of # > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # > +# GNU General Public License for more details. # > +# # > +# You should have received a copy of the GNU General Public License # > +# along with this program. If not, see <http://www.gnu.org/licenses/>. # > +# # > +############################################################################### > + > +############################################################################### > +# Definitions > +############################################################################### > + > +include Config > + > +VER = 1.1.2 > + > +THISAPP = node_exporter-$(VER) > +DL_FILE = $(THISAPP).tar.gz > +DL_FROM = https://github.com/prometheus/node_exporter/archive/v$(VER)/ > +DIR_APP = $(DIR_SRC)/$(THISAPP) > +TARGET = $(DIR_INFO)/$(THISAPP) > +SUP_ARCH = x86_64 i586 aarch64 armv5tel > +PROG = node_exporter > +PAK_VER = 1 > + > +DEPS = "" > + > +############################################################################### > +# Top-level Rules > +############################################################################### > + > +objects = $(DL_FILE) > + > +$(DL_FILE) = $(DL_FROM)/$(DL_FILE) > + > +$(DL_FILE)_MD5 = 33c2be846dbd502f9c0efab149a8cbc5 > + > +install : $(TARGET) > +check : $(patsubst %,$(DIR_CHK)/%,$(objects)) > + > +download : $(patsubst %,$(DIR_DL)/%,$(objects)) > + > +md5 : $(subst %,%_MD5,$(objects)) > + > +dist : > + @$(PAK) > + > +############################################################################### > +# Downloading, checking, md5sum > +############################################################################### > + > +$(patsubst %,$(DIR_CHK)/%,$(objects)) : > + @$(CHECK) > + > +$(patsubst %,$(DIR_DL)/%,$(objects)) : > + @$(LOAD) > + > +$(subst %,%_MD5,$(objects)) : > + @$(MD5) > + > +############################################################################### > +# Installation Details > +############################################################################### > + > +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) > + @$(PREBUILD) > + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) > + cd $(DIR_APP) && make build $(MAKETUNING) $(EXTRA_MAKE) > + > + # install compiled binary > + cd $(DIR_APP) && cp node_exporter /usr/bin > + > + # install configuration file > + install -v -m 644 $(DIR_SRC)/config/node_exporter/node_exporter_options \ > + /etc/node_exporter_options > + > + # Install initscript > + $(call INSTALL_INITSCRIPT,node_exporter) > + > + @rm -rf $(DIR_APP) > + @$(POSTBUILD) > + > diff --git a/make.sh b/make.sh > index 4af0081e9..671f15558 100755 > --- a/make.sh > +++ b/make.sh > @@ -1632,6 +1632,7 @@ buildipfire() { > lfsmake2 socat > lfsmake2 libcdada > lfsmake2 pmacct > + lfsmake2 node_exporter > } > > buildinstaller() { > diff --git a/src/initscripts/packages/node_exporter b/src/initscripts/packages/node_exporter > new file mode 100644 > index 000000000..b9cbc6ab9 > --- /dev/null > +++ b/src/initscripts/packages/node_exporter > @@ -0,0 +1,42 @@ > +#!/bin/sh > +######################################################################## > +# Begin $rc_base/init.d/ > +# > +# Description : Prometheus Node Exporter daemon > +# > +######################################################################## > + > +. /etc/sysconfig/rc > +. ${rc_functions} > + > +# read configurable OPTIONS > +. /etc/node_exporter_options > + > +case "${1}" in > + start) > + boot_mesg "Starting..." The “Starting…” line normally has the name of the program. > + loadproc /usr/bin/node_exporter $OPTIONS > /dev/null 2>&1 & You are throwing away the output of loadproc as well as any potential error messages. Does this program have a way to fork itself into the background? > + ;; > + > + stop) > + boot_mesg "Stopping..." Same here. > + killproc /usr/bin/node_exporter > + ;; > + > + restart) > + ${0} stop > + sleep 1 > + ${0} start > + ;; > + > + status) > + statusproc /usr/bin/node_exporter > + ;; > + > + *) > + echo "Usage: ${0} {start|stop|restart|status}" > + exit 1 > + ;; > +esac > + > +# End $rc_base/init.d/ > diff --git a/src/paks/node_exporter/install.sh b/src/paks/node_exporter/install.sh > new file mode 100644 > index 000000000..e9272d7cb > --- /dev/null > +++ b/src/paks/node_exporter/install.sh > @@ -0,0 +1,31 @@ > +#!/bin/bash > +############################################################################ > +# # > +# This file is part of the IPFire Firewall. # > +# # > +# IPFire is free software; you can redistribute it and/or modify # > +# it under the terms of the GNU General Public License as published by # > +# the Free Software Foundation; either version 2 of the License, or # > +# (at your option) any later version. # > +# # > +# IPFire is distributed in the hope that it will be useful, # > +# but WITHOUT ANY WARRANTY; without even the implied warranty of # > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # > +# GNU General Public License for more details. # > +# # > +# You should have received a copy of the GNU General Public License # > +# along with IPFire; if not, write to the Free Software # > +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # > +# # > +# Copyright (C) 2007 IPFire-Team <info(a)ipfire.org>. # > +# # > +############################################################################ > +# > +. /opt/pakfire/lib/functions.sh > +extract_files > +restore_backup ${NAME} > +start_service --background ${NAME} > + > +ln -svf ../init.d/node_exporter /etc/rc.d/rc0.d/K30node_exporter > +ln -svf ../init.d/node_exporter /etc/rc.d/rc3.d/S40node_exporter > +ln -svf ../init.d/node_exporter /etc/rc.d/rc6.d/K30node_exporter > diff --git a/src/paks/node_exporter/uninstall.sh b/src/paks/node_exporter/uninstall.sh > new file mode 100644 > index 000000000..710baf8b4 > --- /dev/null > +++ b/src/paks/node_exporter/uninstall.sh > @@ -0,0 +1,30 @@ > +#!/bin/bash > +############################################################################ > +# # > +# This file is part of the IPFire Firewall. # > +# # > +# IPFire is free software; you can redistribute it and/or modify # > +# it under the terms of the GNU General Public License as published by # > +# the Free Software Foundation; either version 2 of the License, or # > +# (at your option) any later version. # > +# # > +# IPFire is distributed in the hope that it will be useful, # > +# but WITHOUT ANY WARRANTY; without even the implied warranty of # > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # > +# GNU General Public License for more details. # > +# # > +# You should have received a copy of the GNU General Public License # > +# along with IPFire; if not, write to the Free Software # > +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # > +# # > +# Copyright (C) 2007 IPFire-Team <info(a)ipfire.org>. # > +# # > +############################################################################ > +# > +. /opt/pakfire/lib/functions.sh > +/etc/init.d/node_exporter stop > +make_backup ${NAME} > +remove_files > + > +rm -rfv /etc/rc.d/rc*.d/*node_exporter > + > diff --git a/src/paks/node_exporter/update.sh b/src/paks/node_exporter/update.sh > new file mode 100644 > index 000000000..99776659c > --- /dev/null > +++ b/src/paks/node_exporter/update.sh > @@ -0,0 +1,27 @@ > +#!/bin/bash > +############################################################################ > +# # > +# This file is part of the IPFire Firewall. # > +# # > +# IPFire is free software; you can redistribute it and/or modify # > +# it under the terms of the GNU General Public License as published by # > +# the Free Software Foundation; either version 2 of the License, or # > +# (at your option) any later version. # > +# # > +# IPFire is distributed in the hope that it will be useful, # > +# but WITHOUT ANY WARRANTY; without even the implied warranty of # > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # > +# GNU General Public License for more details. # > +# # > +# You should have received a copy of the GNU General Public License # > +# along with IPFire; if not, write to the Free Software # > +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # > +# # > +# Copyright (C) 2007-2020 IPFire-Team <info(a)ipfire.org>. # > +# # > +############################################################################ > +# > +. /opt/pakfire/lib/functions.sh > +extract_backup_includes > +./uninstall.sh > +./install.sh > -- > 2.30.2 > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/2] Added new node_exporter package. 2021-06-08 16:56 ` Michael Tremer @ 2021-06-09 6:14 ` Holger Sunke 2021-06-10 9:03 ` Michael Tremer 0 siblings, 1 reply; 17+ messages in thread From: Holger Sunke @ 2021-06-09 6:14 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 28773 bytes --] Hello Michael, the node exporter does not have a daemon mode. I could alternatively pip the output into a log file: loadproc /usr/bin/node_exporter $OPTIONS >> /var/log/node_exporter.log 2>&1 & Should I add a third patch to do my fixes or adjust patch 1 & 2 each? Kind regards Holger Am 08.06.21 um 18:56 schrieb Michael Tremer: > Hello, > > This looks quite good, too. > > Just a minor detail below... > >> On 6 Jun 2021, at 18:48, Holger Sunke <holger.sunke(a)posteo.de> wrote: >> >> --- >> config/node_exporter/node_exporter_options | 203 +++++++++++++++++++++ >> config/rootfiles/packages/node_exporter | 3 + >> lfs/node_exporter | 94 ++++++++++ >> make.sh | 1 + >> src/initscripts/packages/node_exporter | 42 +++++ >> src/paks/node_exporter/install.sh | 31 ++++ >> src/paks/node_exporter/uninstall.sh | 30 +++ >> src/paks/node_exporter/update.sh | 27 +++ >> 8 files changed, 431 insertions(+) >> create mode 100644 config/node_exporter/node_exporter_options >> create mode 100644 config/rootfiles/packages/node_exporter >> create mode 100644 lfs/node_exporter >> create mode 100644 src/initscripts/packages/node_exporter >> create mode 100644 src/paks/node_exporter/install.sh >> create mode 100644 src/paks/node_exporter/uninstall.sh >> create mode 100644 src/paks/node_exporter/update.sh >> >> diff --git a/config/node_exporter/node_exporter_options b/config/node_exporter/node_exporter_options >> new file mode 100644 >> index 000000000..f614b1102 >> --- /dev/null >> +++ b/config/node_exporter/node_exporter_options >> @@ -0,0 +1,203 @@ >> +# Customize node_exporter startup command line flags by editing OPTIONS below: >> + >> +export OPTIONS="--web.listen-address=:9100" >> + >> +#Flags: >> +# -h, --help Show context-sensitive help (also try >> +# --help-long and --help-man). >> +# --collector.bcache.priorityStats >> +# Expose expensive priority stats. >> +# --collector.cpu.info Enables metric cpu_info >> +# --collector.cpu.info.flags-include=COLLECTOR.CPU.INFO.FLAGS-INCLUDE >> +# Filter the `flags` field in cpuInfo with a >> +# value that must be a regular expression >> +# --collector.cpu.info.bugs-include=COLLECTOR.CPU.INFO.BUGS-INCLUDE >> +# Filter the `bugs` field in cpuInfo with a value >> +# that must be a regular expression >> +# --collector.diskstats.ignored-devices="^(ram|loop|fd|(h|s|v|xv)d[a-z]|nvme\\d+n\\d+p)\\d+$" >> +# Regexp of devices to ignore for diskstats. >> +# --collector.filesystem.ignored-mount-points="^/(dev|proc|sys|var/lib/docker/.+)($|/)" >> +# Regexp of mount points to ignore for filesystem >> +# collector. >> +# --collector.filesystem.ignored-fs-types="^(autofs|binfmt_misc|bpf|cgroup2?|configfs|debugfs|devpts|devtmpfs|fusectl|hugetlbfs|iso9660|mqueue|nsfs|overlay|proc|procfs|pstore|rpc_pipefs|securityfs|selinuxfs|squashfs|sysfs|tracefs)$" >> +# Regexp of filesystem types to ignore for >> +# filesystem collector. >> +# --collector.ipvs.backend-labels="local_address,local_port,remote_address,remote_port,proto,local_mark" >> +# Comma separated list for IPVS backend stats >> +# labels. >> +# --collector.netclass.ignored-devices="^$" >> +# Regexp of net devices to ignore for netclass >> +# collector. >> +# --collector.netdev.device-include=COLLECTOR.NETDEV.DEVICE-INCLUDE >> +# Regexp of net devices to include (mutually >> +# exclusive to device-exclude). >> +# --collector.netdev.device-exclude=COLLECTOR.NETDEV.DEVICE-EXCLUDE >> +# Regexp of net devices to exclude (mutually >> +# exclusive to device-include). >> +# --collector.netstat.fields="^(.*_(InErrors|InErrs)|Ip_Forwarding|Ip(6|Ext)_(InOctets|OutOctets)|Icmp6?_(InMsgs|OutMsgs)|TcpExt_(Listen.*|Syncookies.*|TCPSynRetrans)|Tcp_(ActiveOpens|InSegs|OutSegs|OutRsts|PassiveOpens|RetransSegs|CurrEstab)|Udp6?_(InDatagrams|OutDatagrams|NoPorts|RcvbufErrors|SndbufErrors))$" >> +# Regexp of fields to return for netstat >> +# collector. >> +# --collector.ntp.server="127.0.0.1" >> +# NTP server to use for ntp collector >> +# --collector.ntp.protocol-version=4 >> +# NTP protocol version >> +# --collector.ntp.server-is-local >> +# Certify that collector.ntp.server address is >> +# not a public ntp server >> +# --collector.ntp.ip-ttl=1 IP TTL to use while sending NTP query >> +# --collector.ntp.max-distance=3.46608s >> +# Max accumulated distance to the root >> +# --collector.ntp.local-offset-tolerance=1ms >> +# Offset between local clock and local ntpd time >> +# to tolerate >> +# --path.procfs="/proc" procfs mountpoint. >> +# --path.sysfs="/sys" sysfs mountpoint. >> +# --path.rootfs="/" rootfs mountpoint. >> +# --collector.perf.cpus="" List of CPUs from which perf metrics should be >> +# collected >> +# --collector.perf.tracepoint=COLLECTOR.PERF.TRACEPOINT ... >> +# perf tracepoint that should be collected >> +# --collector.powersupply.ignored-supplies="^$" >> +# Regexp of power supplies to ignore for >> +# powersupplyclass collector. >> +# --collector.qdisc.fixtures="" >> +# test fixtures to use for qdisc collector >> +# end-to-end testing >> +# --collector.runit.servicedir="/etc/service" >> +# Path to runit service directory. >> +# --collector.supervisord.url="http://localhost:9001/RPC2" >> +# XML RPC endpoint. >> +# --collector.systemd.unit-include=".+" >> +# Regexp of systemd units to include. Units must >> +# both match include and not match exclude to be >> +# included. >> +# --collector.systemd.unit-exclude=".+\\.(automount|device|mount|scope|slice)" >> +# Regexp of systemd units to exclude. Units must >> +# both match include and not match exclude to be >> +# included. >> +# --collector.systemd.enable-task-metrics >> +# Enables service unit tasks metrics >> +# unit_tasks_current and unit_tasks_max >> +# --collector.systemd.enable-restarts-metrics >> +# Enables service unit metric >> +# service_restart_total >> +# --collector.systemd.enable-start-time-metrics >> +# Enables service unit metric >> +# unit_start_time_seconds >> +# --collector.textfile.directory="" >> +# Directory to read text files with metrics from. >> +# --collector.vmstat.fields="^(oom_kill|pgpg|pswp|pg.*fault).*" >> +# Regexp of fields to return for vmstat >> +# collector. >> +# --collector.wifi.fixtures="" >> +# test fixtures to use for wifi collector metrics >> +# --collector.arp Enable the arp collector (default: enabled). >> +# --collector.bcache Enable the bcache collector (default: enabled). >> +# --collector.bonding Enable the bonding collector (default: >> +# enabled). >> +# --collector.btrfs Enable the btrfs collector (default: enabled). >> +# --collector.buddyinfo Enable the buddyinfo collector (default: >> +# disabled). >> +# --collector.conntrack Enable the conntrack collector (default: >> +# enabled). >> +# --collector.cpu Enable the cpu collector (default: enabled). >> +# --collector.cpufreq Enable the cpufreq collector (default: >> +# enabled). >> +# --collector.diskstats Enable the diskstats collector (default: >> +# enabled). >> +# --collector.drbd Enable the drbd collector (default: disabled). >> +# --collector.edac Enable the edac collector (default: enabled). >> +# --collector.entropy Enable the entropy collector (default: >> +# enabled). >> +# --collector.fibrechannel Enable the fibrechannel collector (default: >> +# enabled). >> +# --collector.filefd Enable the filefd collector (default: enabled). >> +# --collector.filesystem Enable the filesystem collector (default: >> +# enabled). >> +# --collector.hwmon Enable the hwmon collector (default: enabled). >> +# --collector.infiniband Enable the infiniband collector (default: >> +# enabled). >> +# --collector.interrupts Enable the interrupts collector (default: >> +# disabled). >> +# --collector.ipvs Enable the ipvs collector (default: enabled). >> +# --collector.ksmd Enable the ksmd collector (default: disabled). >> +# --collector.loadavg Enable the loadavg collector (default: >> +# enabled). >> +# --collector.logind Enable the logind collector (default: >> +# disabled). >> +# --collector.mdadm Enable the mdadm collector (default: enabled). >> +# --collector.meminfo Enable the meminfo collector (default: >> +# enabled). >> +# --collector.meminfo_numa Enable the meminfo_numa collector (default: >> +# disabled). >> +# --collector.mountstats Enable the mountstats collector (default: >> +# disabled). >> +# --collector.netclass Enable the netclass collector (default: >> +# enabled). >> +# --collector.netdev Enable the netdev collector (default: enabled). >> +# --collector.netstat Enable the netstat collector (default: >> +# enabled). >> +# --collector.network_route Enable the network_route collector (default: >> +# disabled). >> +# --collector.nfs Enable the nfs collector (default: enabled). >> +# --collector.nfsd Enable the nfsd collector (default: enabled). >> +# --collector.ntp Enable the ntp collector (default: disabled). >> +# --collector.perf Enable the perf collector (default: disabled). >> +# --collector.powersupplyclass >> +# Enable the powersupplyclass collector (default: >> +# enabled). >> +# --collector.pressure Enable the pressure collector (default: >> +# enabled). >> +# --collector.processes Enable the processes collector (default: >> +# disabled). >> +# --collector.qdisc Enable the qdisc collector (default: disabled). >> +# --collector.rapl Enable the rapl collector (default: enabled). >> +# --collector.runit Enable the runit collector (default: disabled). >> +# --collector.schedstat Enable the schedstat collector (default: >> +# enabled). >> +# --collector.sockstat Enable the sockstat collector (default: >> +# enabled). >> +# --collector.softnet Enable the softnet collector (default: >> +# enabled). >> +# --collector.stat Enable the stat collector (default: enabled). >> +# --collector.supervisord Enable the supervisord collector (default: >> +# disabled). >> +# --collector.systemd Enable the systemd collector (default: >> +# disabled). >> +# --collector.tcpstat Enable the tcpstat collector (default: >> +# disabled). >> +# --collector.textfile Enable the textfile collector (default: >> +# enabled). >> +# --collector.thermal_zone Enable the thermal_zone collector (default: >> +# enabled). >> +# --collector.time Enable the time collector (default: enabled). >> +# --collector.timex Enable the timex collector (default: enabled). >> +# --collector.udp_queues Enable the udp_queues collector (default: >> +# enabled). >> +# --collector.uname Enable the uname collector (default: enabled). >> +# --collector.vmstat Enable the vmstat collector (default: enabled). >> +# --collector.wifi Enable the wifi collector (default: disabled). >> +# --collector.xfs Enable the xfs collector (default: enabled). >> +# --collector.zfs Enable the zfs collector (default: enabled). >> +# --collector.zoneinfo Enable the zoneinfo collector (default: >> +# disabled). >> +# --web.listen-address=":9100" >> +# Address on which to expose metrics and web >> +# interface. >> +# --web.telemetry-path="/metrics" >> +# Path under which to expose metrics. >> +# --web.disable-exporter-metrics >> +# Exclude metrics about the exporter itself >> +# (promhttp_*, process_*, go_*). >> +# --web.max-requests=40 Maximum number of parallel scrape requests. Use >> +# 0 to disable. >> +# --collector.disable-defaults >> +# Set all collectors to disabled by default. >> +# --web.config="" [EXPERIMENTAL] Path to config yaml file that >> +# can enable TLS or authentication. >> +# --log.level=info Only log messages with the given severity or >> +# above. One of: [debug, info, warn, error] >> +# --log.format=logfmt Output format of log messages. One of: [logfmt, >> +# json] >> +# --version Show application version. >> + >> diff --git a/config/rootfiles/packages/node_exporter b/config/rootfiles/packages/node_exporter >> new file mode 100644 >> index 000000000..994c8365b >> --- /dev/null >> +++ b/config/rootfiles/packages/node_exporter >> @@ -0,0 +1,3 @@ >> +usr/bin/node_exporter >> +etc/node_exporter_options >> +etc/rc.d/init.d/node_exporter >> diff --git a/lfs/node_exporter b/lfs/node_exporter >> new file mode 100644 >> index 000000000..942816754 >> --- /dev/null >> +++ b/lfs/node_exporter >> @@ -0,0 +1,94 @@ >> +############################################################################## >> +# # >> +# IPFire.org - A linux based firewall # >> +# Copyright (C) 2007 Michael Tremer & Christian Schmidt # >> +# # >> +# This program is free software: you can redistribute it and/or modify # >> +# it under the terms of the GNU General Public License as published by # >> +# the Free Software Foundation, either version 3 of the License, or # >> +# (at your option) any later version. # >> +# # >> +# This program is distributed in the hope that it will be useful, # >> +# but WITHOUT ANY WARRANTY; without even the implied warranty of # >> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # >> +# GNU General Public License for more details. # >> +# # >> +# You should have received a copy of the GNU General Public License # >> +# along with this program. If not, see <http://www.gnu.org/licenses/>. # >> +# # >> +############################################################################### >> + >> +############################################################################### >> +# Definitions >> +############################################################################### >> + >> +include Config >> + >> +VER = 1.1.2 >> + >> +THISAPP = node_exporter-$(VER) >> +DL_FILE = $(THISAPP).tar.gz >> +DL_FROM = https://github.com/prometheus/node_exporter/archive/v$(VER)/ >> +DIR_APP = $(DIR_SRC)/$(THISAPP) >> +TARGET = $(DIR_INFO)/$(THISAPP) >> +SUP_ARCH = x86_64 i586 aarch64 armv5tel >> +PROG = node_exporter >> +PAK_VER = 1 >> + >> +DEPS = "" >> + >> +############################################################################### >> +# Top-level Rules >> +############################################################################### >> + >> +objects = $(DL_FILE) >> + >> +$(DL_FILE) = $(DL_FROM)/$(DL_FILE) >> + >> +$(DL_FILE)_MD5 = 33c2be846dbd502f9c0efab149a8cbc5 >> + >> +install : $(TARGET) >> +check : $(patsubst %,$(DIR_CHK)/%,$(objects)) >> + >> +download : $(patsubst %,$(DIR_DL)/%,$(objects)) >> + >> +md5 : $(subst %,%_MD5,$(objects)) >> + >> +dist : >> + @$(PAK) >> + >> +############################################################################### >> +# Downloading, checking, md5sum >> +############################################################################### >> + >> +$(patsubst %,$(DIR_CHK)/%,$(objects)) : >> + @$(CHECK) >> + >> +$(patsubst %,$(DIR_DL)/%,$(objects)) : >> + @$(LOAD) >> + >> +$(subst %,%_MD5,$(objects)) : >> + @$(MD5) >> + >> +############################################################################### >> +# Installation Details >> +############################################################################### >> + >> +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) >> + @$(PREBUILD) >> + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) >> + cd $(DIR_APP) && make build $(MAKETUNING) $(EXTRA_MAKE) >> + >> + # install compiled binary >> + cd $(DIR_APP) && cp node_exporter /usr/bin >> + >> + # install configuration file >> + install -v -m 644 $(DIR_SRC)/config/node_exporter/node_exporter_options \ >> + /etc/node_exporter_options >> + >> + # Install initscript >> + $(call INSTALL_INITSCRIPT,node_exporter) >> + >> + @rm -rf $(DIR_APP) >> + @$(POSTBUILD) >> + >> diff --git a/make.sh b/make.sh >> index 4af0081e9..671f15558 100755 >> --- a/make.sh >> +++ b/make.sh >> @@ -1632,6 +1632,7 @@ buildipfire() { >> lfsmake2 socat >> lfsmake2 libcdada >> lfsmake2 pmacct >> + lfsmake2 node_exporter >> } >> >> buildinstaller() { >> diff --git a/src/initscripts/packages/node_exporter b/src/initscripts/packages/node_exporter >> new file mode 100644 >> index 000000000..b9cbc6ab9 >> --- /dev/null >> +++ b/src/initscripts/packages/node_exporter >> @@ -0,0 +1,42 @@ >> +#!/bin/sh >> +######################################################################## >> +# Begin $rc_base/init.d/ >> +# >> +# Description : Prometheus Node Exporter daemon >> +# >> +######################################################################## >> + >> +. /etc/sysconfig/rc >> +. ${rc_functions} >> + >> +# read configurable OPTIONS >> +. /etc/node_exporter_options >> + >> +case "${1}" in >> + start) >> + boot_mesg "Starting..." > > The “Starting…” line normally has the name of the program. > >> + loadproc /usr/bin/node_exporter $OPTIONS > /dev/null 2>&1 & > > You are throwing away the output of loadproc as well as any potential error messages. > > Does this program have a way to fork itself into the background? > >> + ;; >> + >> + stop) >> + boot_mesg "Stopping..." > > Same here. > >> + killproc /usr/bin/node_exporter >> + ;; >> + >> + restart) >> + ${0} stop >> + sleep 1 >> + ${0} start >> + ;; >> + >> + status) >> + statusproc /usr/bin/node_exporter >> + ;; >> + >> + *) >> + echo "Usage: ${0} {start|stop|restart|status}" >> + exit 1 >> + ;; >> +esac >> + >> +# End $rc_base/init.d/ >> diff --git a/src/paks/node_exporter/install.sh b/src/paks/node_exporter/install.sh >> new file mode 100644 >> index 000000000..e9272d7cb >> --- /dev/null >> +++ b/src/paks/node_exporter/install.sh >> @@ -0,0 +1,31 @@ >> +#!/bin/bash >> +############################################################################ >> +# # >> +# This file is part of the IPFire Firewall. # >> +# # >> +# IPFire is free software; you can redistribute it and/or modify # >> +# it under the terms of the GNU General Public License as published by # >> +# the Free Software Foundation; either version 2 of the License, or # >> +# (at your option) any later version. # >> +# # >> +# IPFire is distributed in the hope that it will be useful, # >> +# but WITHOUT ANY WARRANTY; without even the implied warranty of # >> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # >> +# GNU General Public License for more details. # >> +# # >> +# You should have received a copy of the GNU General Public License # >> +# along with IPFire; if not, write to the Free Software # >> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # >> +# # >> +# Copyright (C) 2007 IPFire-Team <info(a)ipfire.org>. # >> +# # >> +############################################################################ >> +# >> +. /opt/pakfire/lib/functions.sh >> +extract_files >> +restore_backup ${NAME} >> +start_service --background ${NAME} >> + >> +ln -svf ../init.d/node_exporter /etc/rc.d/rc0.d/K30node_exporter >> +ln -svf ../init.d/node_exporter /etc/rc.d/rc3.d/S40node_exporter >> +ln -svf ../init.d/node_exporter /etc/rc.d/rc6.d/K30node_exporter >> diff --git a/src/paks/node_exporter/uninstall.sh b/src/paks/node_exporter/uninstall.sh >> new file mode 100644 >> index 000000000..710baf8b4 >> --- /dev/null >> +++ b/src/paks/node_exporter/uninstall.sh >> @@ -0,0 +1,30 @@ >> +#!/bin/bash >> +############################################################################ >> +# # >> +# This file is part of the IPFire Firewall. # >> +# # >> +# IPFire is free software; you can redistribute it and/or modify # >> +# it under the terms of the GNU General Public License as published by # >> +# the Free Software Foundation; either version 2 of the License, or # >> +# (at your option) any later version. # >> +# # >> +# IPFire is distributed in the hope that it will be useful, # >> +# but WITHOUT ANY WARRANTY; without even the implied warranty of # >> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # >> +# GNU General Public License for more details. # >> +# # >> +# You should have received a copy of the GNU General Public License # >> +# along with IPFire; if not, write to the Free Software # >> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # >> +# # >> +# Copyright (C) 2007 IPFire-Team <info(a)ipfire.org>. # >> +# # >> +############################################################################ >> +# >> +. /opt/pakfire/lib/functions.sh >> +/etc/init.d/node_exporter stop >> +make_backup ${NAME} >> +remove_files >> + >> +rm -rfv /etc/rc.d/rc*.d/*node_exporter >> + >> diff --git a/src/paks/node_exporter/update.sh b/src/paks/node_exporter/update.sh >> new file mode 100644 >> index 000000000..99776659c >> --- /dev/null >> +++ b/src/paks/node_exporter/update.sh >> @@ -0,0 +1,27 @@ >> +#!/bin/bash >> +############################################################################ >> +# # >> +# This file is part of the IPFire Firewall. # >> +# # >> +# IPFire is free software; you can redistribute it and/or modify # >> +# it under the terms of the GNU General Public License as published by # >> +# the Free Software Foundation; either version 2 of the License, or # >> +# (at your option) any later version. # >> +# # >> +# IPFire is distributed in the hope that it will be useful, # >> +# but WITHOUT ANY WARRANTY; without even the implied warranty of # >> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # >> +# GNU General Public License for more details. # >> +# # >> +# You should have received a copy of the GNU General Public License # >> +# along with IPFire; if not, write to the Free Software # >> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # >> +# # >> +# Copyright (C) 2007-2020 IPFire-Team <info(a)ipfire.org>. # >> +# # >> +############################################################################ >> +# >> +. /opt/pakfire/lib/functions.sh >> +extract_backup_includes >> +./uninstall.sh >> +./install.sh >> -- >> 2.30.2 >> > ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 2/2] Added new node_exporter package. 2021-06-09 6:14 ` Holger Sunke @ 2021-06-10 9:03 ` Michael Tremer 0 siblings, 0 replies; 17+ messages in thread From: Michael Tremer @ 2021-06-10 9:03 UTC (permalink / raw) To: development [-- Attachment #1: Type: text/plain, Size: 29902 bytes --] Hello, > On 9 Jun 2021, at 07:14, Holger Sunke <holger.sunke(a)posteo.de> wrote: > > Hello Michael, > > the node exporter does not have a daemon mode. > I could alternatively pip the output into a log file: > > loadproc /usr/bin/node_exporter $OPTIONS >> /var/log/node_exporter.log 2>&1 & Hmm, so there are two problems here: * loadproc shows [ OK ] or [ ERROR ] so that the user knows if the program was started successfully. That is now being thrown away. * Anything useful that node_exporter would print is also being thrown away This seems to become a common thing that they remove the fork mode, maybe we need a special version of loadproc() that can handle that. > Should I add a third patch to do my fixes or adjust patch 1 & 2 each? Let’s work on Go first and get that merged and then come back to this one. We need to have a solution first and then implement it. -Michael > Kind regards > > Holger > > > Am 08.06.21 um 18:56 schrieb Michael Tremer: >> Hello, >> This looks quite good, too. >> Just a minor detail below... >>> On 6 Jun 2021, at 18:48, Holger Sunke <holger.sunke(a)posteo.de> wrote: >>> >>> --- >>> config/node_exporter/node_exporter_options | 203 +++++++++++++++++++++ >>> config/rootfiles/packages/node_exporter | 3 + >>> lfs/node_exporter | 94 ++++++++++ >>> make.sh | 1 + >>> src/initscripts/packages/node_exporter | 42 +++++ >>> src/paks/node_exporter/install.sh | 31 ++++ >>> src/paks/node_exporter/uninstall.sh | 30 +++ >>> src/paks/node_exporter/update.sh | 27 +++ >>> 8 files changed, 431 insertions(+) >>> create mode 100644 config/node_exporter/node_exporter_options >>> create mode 100644 config/rootfiles/packages/node_exporter >>> create mode 100644 lfs/node_exporter >>> create mode 100644 src/initscripts/packages/node_exporter >>> create mode 100644 src/paks/node_exporter/install.sh >>> create mode 100644 src/paks/node_exporter/uninstall.sh >>> create mode 100644 src/paks/node_exporter/update.sh >>> >>> diff --git a/config/node_exporter/node_exporter_options b/config/node_exporter/node_exporter_options >>> new file mode 100644 >>> index 000000000..f614b1102 >>> --- /dev/null >>> +++ b/config/node_exporter/node_exporter_options >>> @@ -0,0 +1,203 @@ >>> +# Customize node_exporter startup command line flags by editing OPTIONS below: >>> + >>> +export OPTIONS="--web.listen-address=:9100" >>> + >>> +#Flags: >>> +# -h, --help Show context-sensitive help (also try >>> +# --help-long and --help-man). >>> +# --collector.bcache.priorityStats >>> +# Expose expensive priority stats. >>> +# --collector.cpu.info Enables metric cpu_info >>> +# --collector.cpu.info.flags-include=COLLECTOR.CPU.INFO.FLAGS-INCLUDE >>> +# Filter the `flags` field in cpuInfo with a >>> +# value that must be a regular expression >>> +# --collector.cpu.info.bugs-include=COLLECTOR.CPU.INFO.BUGS-INCLUDE >>> +# Filter the `bugs` field in cpuInfo with a value >>> +# that must be a regular expression >>> +# --collector.diskstats.ignored-devices="^(ram|loop|fd|(h|s|v|xv)d[a-z]|nvme\\d+n\\d+p)\\d+$" >>> +# Regexp of devices to ignore for diskstats. >>> +# --collector.filesystem.ignored-mount-points="^/(dev|proc|sys|var/lib/docker/.+)($|/)" >>> +# Regexp of mount points to ignore for filesystem >>> +# collector. >>> +# --collector.filesystem.ignored-fs-types="^(autofs|binfmt_misc|bpf|cgroup2?|configfs|debugfs|devpts|devtmpfs|fusectl|hugetlbfs|iso9660|mqueue|nsfs|overlay|proc|procfs|pstore|rpc_pipefs|securityfs|selinuxfs|squashfs|sysfs|tracefs)$" >>> +# Regexp of filesystem types to ignore for >>> +# filesystem collector. >>> +# --collector.ipvs.backend-labels="local_address,local_port,remote_address,remote_port,proto,local_mark" >>> +# Comma separated list for IPVS backend stats >>> +# labels. >>> +# --collector.netclass.ignored-devices="^$" >>> +# Regexp of net devices to ignore for netclass >>> +# collector. >>> +# --collector.netdev.device-include=COLLECTOR.NETDEV.DEVICE-INCLUDE >>> +# Regexp of net devices to include (mutually >>> +# exclusive to device-exclude). >>> +# --collector.netdev.device-exclude=COLLECTOR.NETDEV.DEVICE-EXCLUDE >>> +# Regexp of net devices to exclude (mutually >>> +# exclusive to device-include). >>> +# --collector.netstat.fields="^(.*_(InErrors|InErrs)|Ip_Forwarding|Ip(6|Ext)_(InOctets|OutOctets)|Icmp6?_(InMsgs|OutMsgs)|TcpExt_(Listen.*|Syncookies.*|TCPSynRetrans)|Tcp_(ActiveOpens|InSegs|OutSegs|OutRsts|PassiveOpens|RetransSegs|CurrEstab)|Udp6?_(InDatagrams|OutDatagrams|NoPorts|RcvbufErrors|SndbufErrors))$" >>> +# Regexp of fields to return for netstat >>> +# collector. >>> +# --collector.ntp.server="127.0.0.1" >>> +# NTP server to use for ntp collector >>> +# --collector.ntp.protocol-version=4 >>> +# NTP protocol version >>> +# --collector.ntp.server-is-local >>> +# Certify that collector.ntp.server address is >>> +# not a public ntp server >>> +# --collector.ntp.ip-ttl=1 IP TTL to use while sending NTP query >>> +# --collector.ntp.max-distance=3.46608s >>> +# Max accumulated distance to the root >>> +# --collector.ntp.local-offset-tolerance=1ms >>> +# Offset between local clock and local ntpd time >>> +# to tolerate >>> +# --path.procfs="/proc" procfs mountpoint. >>> +# --path.sysfs="/sys" sysfs mountpoint. >>> +# --path.rootfs="/" rootfs mountpoint. >>> +# --collector.perf.cpus="" List of CPUs from which perf metrics should be >>> +# collected >>> +# --collector.perf.tracepoint=COLLECTOR.PERF.TRACEPOINT ... >>> +# perf tracepoint that should be collected >>> +# --collector.powersupply.ignored-supplies="^$" >>> +# Regexp of power supplies to ignore for >>> +# powersupplyclass collector. >>> +# --collector.qdisc.fixtures="" >>> +# test fixtures to use for qdisc collector >>> +# end-to-end testing >>> +# --collector.runit.servicedir="/etc/service" >>> +# Path to runit service directory. >>> +# --collector.supervisord.url="http://localhost:9001/RPC2" >>> +# XML RPC endpoint. >>> +# --collector.systemd.unit-include=".+" >>> +# Regexp of systemd units to include. Units must >>> +# both match include and not match exclude to be >>> +# included. >>> +# --collector.systemd.unit-exclude=".+\\.(automount|device|mount|scope|slice)" >>> +# Regexp of systemd units to exclude. Units must >>> +# both match include and not match exclude to be >>> +# included. >>> +# --collector.systemd.enable-task-metrics >>> +# Enables service unit tasks metrics >>> +# unit_tasks_current and unit_tasks_max >>> +# --collector.systemd.enable-restarts-metrics >>> +# Enables service unit metric >>> +# service_restart_total >>> +# --collector.systemd.enable-start-time-metrics >>> +# Enables service unit metric >>> +# unit_start_time_seconds >>> +# --collector.textfile.directory="" >>> +# Directory to read text files with metrics from. >>> +# --collector.vmstat.fields="^(oom_kill|pgpg|pswp|pg.*fault).*" >>> +# Regexp of fields to return for vmstat >>> +# collector. >>> +# --collector.wifi.fixtures="" >>> +# test fixtures to use for wifi collector metrics >>> +# --collector.arp Enable the arp collector (default: enabled). >>> +# --collector.bcache Enable the bcache collector (default: enabled). >>> +# --collector.bonding Enable the bonding collector (default: >>> +# enabled). >>> +# --collector.btrfs Enable the btrfs collector (default: enabled). >>> +# --collector.buddyinfo Enable the buddyinfo collector (default: >>> +# disabled). >>> +# --collector.conntrack Enable the conntrack collector (default: >>> +# enabled). >>> +# --collector.cpu Enable the cpu collector (default: enabled). >>> +# --collector.cpufreq Enable the cpufreq collector (default: >>> +# enabled). >>> +# --collector.diskstats Enable the diskstats collector (default: >>> +# enabled). >>> +# --collector.drbd Enable the drbd collector (default: disabled). >>> +# --collector.edac Enable the edac collector (default: enabled). >>> +# --collector.entropy Enable the entropy collector (default: >>> +# enabled). >>> +# --collector.fibrechannel Enable the fibrechannel collector (default: >>> +# enabled). >>> +# --collector.filefd Enable the filefd collector (default: enabled). >>> +# --collector.filesystem Enable the filesystem collector (default: >>> +# enabled). >>> +# --collector.hwmon Enable the hwmon collector (default: enabled). >>> +# --collector.infiniband Enable the infiniband collector (default: >>> +# enabled). >>> +# --collector.interrupts Enable the interrupts collector (default: >>> +# disabled). >>> +# --collector.ipvs Enable the ipvs collector (default: enabled). >>> +# --collector.ksmd Enable the ksmd collector (default: disabled). >>> +# --collector.loadavg Enable the loadavg collector (default: >>> +# enabled). >>> +# --collector.logind Enable the logind collector (default: >>> +# disabled). >>> +# --collector.mdadm Enable the mdadm collector (default: enabled). >>> +# --collector.meminfo Enable the meminfo collector (default: >>> +# enabled). >>> +# --collector.meminfo_numa Enable the meminfo_numa collector (default: >>> +# disabled). >>> +# --collector.mountstats Enable the mountstats collector (default: >>> +# disabled). >>> +# --collector.netclass Enable the netclass collector (default: >>> +# enabled). >>> +# --collector.netdev Enable the netdev collector (default: enabled). >>> +# --collector.netstat Enable the netstat collector (default: >>> +# enabled). >>> +# --collector.network_route Enable the network_route collector (default: >>> +# disabled). >>> +# --collector.nfs Enable the nfs collector (default: enabled). >>> +# --collector.nfsd Enable the nfsd collector (default: enabled). >>> +# --collector.ntp Enable the ntp collector (default: disabled). >>> +# --collector.perf Enable the perf collector (default: disabled). >>> +# --collector.powersupplyclass >>> +# Enable the powersupplyclass collector (default: >>> +# enabled). >>> +# --collector.pressure Enable the pressure collector (default: >>> +# enabled). >>> +# --collector.processes Enable the processes collector (default: >>> +# disabled). >>> +# --collector.qdisc Enable the qdisc collector (default: disabled). >>> +# --collector.rapl Enable the rapl collector (default: enabled). >>> +# --collector.runit Enable the runit collector (default: disabled). >>> +# --collector.schedstat Enable the schedstat collector (default: >>> +# enabled). >>> +# --collector.sockstat Enable the sockstat collector (default: >>> +# enabled). >>> +# --collector.softnet Enable the softnet collector (default: >>> +# enabled). >>> +# --collector.stat Enable the stat collector (default: enabled). >>> +# --collector.supervisord Enable the supervisord collector (default: >>> +# disabled). >>> +# --collector.systemd Enable the systemd collector (default: >>> +# disabled). >>> +# --collector.tcpstat Enable the tcpstat collector (default: >>> +# disabled). >>> +# --collector.textfile Enable the textfile collector (default: >>> +# enabled). >>> +# --collector.thermal_zone Enable the thermal_zone collector (default: >>> +# enabled). >>> +# --collector.time Enable the time collector (default: enabled). >>> +# --collector.timex Enable the timex collector (default: enabled). >>> +# --collector.udp_queues Enable the udp_queues collector (default: >>> +# enabled). >>> +# --collector.uname Enable the uname collector (default: enabled). >>> +# --collector.vmstat Enable the vmstat collector (default: enabled). >>> +# --collector.wifi Enable the wifi collector (default: disabled). >>> +# --collector.xfs Enable the xfs collector (default: enabled). >>> +# --collector.zfs Enable the zfs collector (default: enabled). >>> +# --collector.zoneinfo Enable the zoneinfo collector (default: >>> +# disabled). >>> +# --web.listen-address=":9100" >>> +# Address on which to expose metrics and web >>> +# interface. >>> +# --web.telemetry-path="/metrics" >>> +# Path under which to expose metrics. >>> +# --web.disable-exporter-metrics >>> +# Exclude metrics about the exporter itself >>> +# (promhttp_*, process_*, go_*). >>> +# --web.max-requests=40 Maximum number of parallel scrape requests. Use >>> +# 0 to disable. >>> +# --collector.disable-defaults >>> +# Set all collectors to disabled by default. >>> +# --web.config="" [EXPERIMENTAL] Path to config yaml file that >>> +# can enable TLS or authentication. >>> +# --log.level=info Only log messages with the given severity or >>> +# above. One of: [debug, info, warn, error] >>> +# --log.format=logfmt Output format of log messages. One of: [logfmt, >>> +# json] >>> +# --version Show application version. >>> + >>> diff --git a/config/rootfiles/packages/node_exporter b/config/rootfiles/packages/node_exporter >>> new file mode 100644 >>> index 000000000..994c8365b >>> --- /dev/null >>> +++ b/config/rootfiles/packages/node_exporter >>> @@ -0,0 +1,3 @@ >>> +usr/bin/node_exporter >>> +etc/node_exporter_options >>> +etc/rc.d/init.d/node_exporter >>> diff --git a/lfs/node_exporter b/lfs/node_exporter >>> new file mode 100644 >>> index 000000000..942816754 >>> --- /dev/null >>> +++ b/lfs/node_exporter >>> @@ -0,0 +1,94 @@ >>> +############################################################################## >>> +# # >>> +# IPFire.org - A linux based firewall # >>> +# Copyright (C) 2007 Michael Tremer & Christian Schmidt # >>> +# # >>> +# This program is free software: you can redistribute it and/or modify # >>> +# it under the terms of the GNU General Public License as published by # >>> +# the Free Software Foundation, either version 3 of the License, or # >>> +# (at your option) any later version. # >>> +# # >>> +# This program is distributed in the hope that it will be useful, # >>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of # >>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # >>> +# GNU General Public License for more details. # >>> +# # >>> +# You should have received a copy of the GNU General Public License # >>> +# along with this program. If not, see <http://www.gnu.org/licenses/>. # >>> +# # >>> +############################################################################### >>> + >>> +############################################################################### >>> +# Definitions >>> +############################################################################### >>> + >>> +include Config >>> + >>> +VER = 1.1.2 >>> + >>> +THISAPP = node_exporter-$(VER) >>> +DL_FILE = $(THISAPP).tar.gz >>> +DL_FROM = https://github.com/prometheus/node_exporter/archive/v$(VER)/ >>> +DIR_APP = $(DIR_SRC)/$(THISAPP) >>> +TARGET = $(DIR_INFO)/$(THISAPP) >>> +SUP_ARCH = x86_64 i586 aarch64 armv5tel >>> +PROG = node_exporter >>> +PAK_VER = 1 >>> + >>> +DEPS = "" >>> + >>> +############################################################################### >>> +# Top-level Rules >>> +############################################################################### >>> + >>> +objects = $(DL_FILE) >>> + >>> +$(DL_FILE) = $(DL_FROM)/$(DL_FILE) >>> + >>> +$(DL_FILE)_MD5 = 33c2be846dbd502f9c0efab149a8cbc5 >>> + >>> +install : $(TARGET) >>> +check : $(patsubst %,$(DIR_CHK)/%,$(objects)) >>> + >>> +download : $(patsubst %,$(DIR_DL)/%,$(objects)) >>> + >>> +md5 : $(subst %,%_MD5,$(objects)) >>> + >>> +dist : >>> + @$(PAK) >>> + >>> +############################################################################### >>> +# Downloading, checking, md5sum >>> +############################################################################### >>> + >>> +$(patsubst %,$(DIR_CHK)/%,$(objects)) : >>> + @$(CHECK) >>> + >>> +$(patsubst %,$(DIR_DL)/%,$(objects)) : >>> + @$(LOAD) >>> + >>> +$(subst %,%_MD5,$(objects)) : >>> + @$(MD5) >>> + >>> +############################################################################### >>> +# Installation Details >>> +############################################################################### >>> + >>> +$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects)) >>> + @$(PREBUILD) >>> + @rm -rf $(DIR_APP) && cd $(DIR_SRC) && tar zxf $(DIR_DL)/$(DL_FILE) >>> + cd $(DIR_APP) && make build $(MAKETUNING) $(EXTRA_MAKE) >>> + >>> + # install compiled binary >>> + cd $(DIR_APP) && cp node_exporter /usr/bin >>> + >>> + # install configuration file >>> + install -v -m 644 $(DIR_SRC)/config/node_exporter/node_exporter_options \ >>> + /etc/node_exporter_options >>> + >>> + # Install initscript >>> + $(call INSTALL_INITSCRIPT,node_exporter) >>> + >>> + @rm -rf $(DIR_APP) >>> + @$(POSTBUILD) >>> + >>> diff --git a/make.sh b/make.sh >>> index 4af0081e9..671f15558 100755 >>> --- a/make.sh >>> +++ b/make.sh >>> @@ -1632,6 +1632,7 @@ buildipfire() { >>> lfsmake2 socat >>> lfsmake2 libcdada >>> lfsmake2 pmacct >>> + lfsmake2 node_exporter >>> } >>> >>> buildinstaller() { >>> diff --git a/src/initscripts/packages/node_exporter b/src/initscripts/packages/node_exporter >>> new file mode 100644 >>> index 000000000..b9cbc6ab9 >>> --- /dev/null >>> +++ b/src/initscripts/packages/node_exporter >>> @@ -0,0 +1,42 @@ >>> +#!/bin/sh >>> +######################################################################## >>> +# Begin $rc_base/init.d/ >>> +# >>> +# Description : Prometheus Node Exporter daemon >>> +# >>> +######################################################################## >>> + >>> +. /etc/sysconfig/rc >>> +. ${rc_functions} >>> + >>> +# read configurable OPTIONS >>> +. /etc/node_exporter_options >>> + >>> +case "${1}" in >>> + start) >>> + boot_mesg "Starting..." >> The “Starting…” line normally has the name of the program. >>> + loadproc /usr/bin/node_exporter $OPTIONS > /dev/null 2>&1 & >> You are throwing away the output of loadproc as well as any potential error messages. >> Does this program have a way to fork itself into the background? >>> + ;; >>> + >>> + stop) >>> + boot_mesg "Stopping..." >> Same here. >>> + killproc /usr/bin/node_exporter >>> + ;; >>> + >>> + restart) >>> + ${0} stop >>> + sleep 1 >>> + ${0} start >>> + ;; >>> + >>> + status) >>> + statusproc /usr/bin/node_exporter >>> + ;; >>> + >>> + *) >>> + echo "Usage: ${0} {start|stop|restart|status}" >>> + exit 1 >>> + ;; >>> +esac >>> + >>> +# End $rc_base/init.d/ >>> diff --git a/src/paks/node_exporter/install.sh b/src/paks/node_exporter/install.sh >>> new file mode 100644 >>> index 000000000..e9272d7cb >>> --- /dev/null >>> +++ b/src/paks/node_exporter/install.sh >>> @@ -0,0 +1,31 @@ >>> +#!/bin/bash >>> +############################################################################ >>> +# # >>> +# This file is part of the IPFire Firewall. # >>> +# # >>> +# IPFire is free software; you can redistribute it and/or modify # >>> +# it under the terms of the GNU General Public License as published by # >>> +# the Free Software Foundation; either version 2 of the License, or # >>> +# (at your option) any later version. # >>> +# # >>> +# IPFire is distributed in the hope that it will be useful, # >>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of # >>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # >>> +# GNU General Public License for more details. # >>> +# # >>> +# You should have received a copy of the GNU General Public License # >>> +# along with IPFire; if not, write to the Free Software # >>> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # >>> +# # >>> +# Copyright (C) 2007 IPFire-Team <info(a)ipfire.org>. # >>> +# # >>> +############################################################################ >>> +# >>> +. /opt/pakfire/lib/functions.sh >>> +extract_files >>> +restore_backup ${NAME} >>> +start_service --background ${NAME} >>> + >>> +ln -svf ../init.d/node_exporter /etc/rc.d/rc0.d/K30node_exporter >>> +ln -svf ../init.d/node_exporter /etc/rc.d/rc3.d/S40node_exporter >>> +ln -svf ../init.d/node_exporter /etc/rc.d/rc6.d/K30node_exporter >>> diff --git a/src/paks/node_exporter/uninstall.sh b/src/paks/node_exporter/uninstall.sh >>> new file mode 100644 >>> index 000000000..710baf8b4 >>> --- /dev/null >>> +++ b/src/paks/node_exporter/uninstall.sh >>> @@ -0,0 +1,30 @@ >>> +#!/bin/bash >>> +############################################################################ >>> +# # >>> +# This file is part of the IPFire Firewall. # >>> +# # >>> +# IPFire is free software; you can redistribute it and/or modify # >>> +# it under the terms of the GNU General Public License as published by # >>> +# the Free Software Foundation; either version 2 of the License, or # >>> +# (at your option) any later version. # >>> +# # >>> +# IPFire is distributed in the hope that it will be useful, # >>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of # >>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # >>> +# GNU General Public License for more details. # >>> +# # >>> +# You should have received a copy of the GNU General Public License # >>> +# along with IPFire; if not, write to the Free Software # >>> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # >>> +# # >>> +# Copyright (C) 2007 IPFire-Team <info(a)ipfire.org>. # >>> +# # >>> +############################################################################ >>> +# >>> +. /opt/pakfire/lib/functions.sh >>> +/etc/init.d/node_exporter stop >>> +make_backup ${NAME} >>> +remove_files >>> + >>> +rm -rfv /etc/rc.d/rc*.d/*node_exporter >>> + >>> diff --git a/src/paks/node_exporter/update.sh b/src/paks/node_exporter/update.sh >>> new file mode 100644 >>> index 000000000..99776659c >>> --- /dev/null >>> +++ b/src/paks/node_exporter/update.sh >>> @@ -0,0 +1,27 @@ >>> +#!/bin/bash >>> +############################################################################ >>> +# # >>> +# This file is part of the IPFire Firewall. # >>> +# # >>> +# IPFire is free software; you can redistribute it and/or modify # >>> +# it under the terms of the GNU General Public License as published by # >>> +# the Free Software Foundation; either version 2 of the License, or # >>> +# (at your option) any later version. # >>> +# # >>> +# IPFire is distributed in the hope that it will be useful, # >>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of # >>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # >>> +# GNU General Public License for more details. # >>> +# # >>> +# You should have received a copy of the GNU General Public License # >>> +# along with IPFire; if not, write to the Free Software # >>> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # >>> +# # >>> +# Copyright (C) 2007-2020 IPFire-Team <info(a)ipfire.org>. # >>> +# # >>> +############################################################################ >>> +# >>> +. /opt/pakfire/lib/functions.sh >>> +extract_backup_includes >>> +./uninstall.sh >>> +./install.sh >>> -- >>> 2.30.2 >>> ^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2021-06-10 9:03 UTC | newest] Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-05-06 19:46 [PATCH 0/2] Added new Package node_exporter Holger Sunke 2021-05-06 19:46 ` [PATCH 1/2] Added i586/386 support for GO language required for node_exporter Holger Sunke 2021-05-06 20:26 ` Adolf Belka 2021-05-07 11:28 ` Michael Tremer 2021-05-07 18:19 ` Holger Sunke 2021-05-11 9:53 ` Michael Tremer 2021-05-21 8:56 ` Holger Sunke 2021-05-21 8:59 ` Michael Tremer 2021-05-06 19:46 ` [PATCH 2/2] Added new node_exporter package Holger Sunke 2021-05-06 20:58 ` Adolf Belka 2021-05-06 20:43 ` [PATCH 0/2] Added new Package node_exporter Adolf Belka 2021-05-07 18:05 ` Holger Sunke 2021-05-24 20:45 ` Robin Roevens 2021-06-06 17:48 [PATCH 0/2] Reworked patches introducing node_exporter on master branch Holger Sunke 2021-06-06 17:48 ` [PATCH 2/2] Added new node_exporter package Holger Sunke 2021-06-08 16:56 ` Michael Tremer 2021-06-09 6:14 ` Holger Sunke 2021-06-10 9:03 ` Michael Tremer
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox