So I should raise a patch that removes the lvmetad initscript and the 
references to it in the initscripts lfs and rootfile, correct?

Regards,
Adolf.

On 09/05/2023 10:01, Michael Tremer wrote:
> This is a service that caches any meta information about the LVM arrays.
> 
> At some point, we decided to run it by default, because it makes any block operations a little bit faster.
> 
> The change log states that it has been removed, so we simply need to drop this line. I do not think that this will cause any other changes for us.
> 
> -Michael
> 
>> On 9 May 2023, at 08:51, Arne Fitzenreiter <arne_f(a)ipfire.org> wrote:
>>
>> This patch remove lvmetad but there is still an initskript that try to start it.
>> I don't know what this does but it give an error at boot.
>>
>> Arne
>>
>>
>> Am 2023-05-02 19:53, schrieb Adolf Belka:
>>> - Update from version 2.02.188 to 2.03.21
>>> - Update of rootfile
>>> - Changelog
>>>     version 2.03.21 - 21st April 2023
>>>   Fix activation of vdo-pool for with 0 length headers (converted pools).
>>>   Avoid printing internal init messages when creation integration devices.
>>>   Allow (write)cache over raid+integrity LV.
>>>     version 2.03.20 - 21st March 2023
>>>   Fix segfault if using -S|--select with log/report_command_log=1 setting.
>>>   Configure now fails when requested lvmlockd dependencies are missing.
>>>   Add some configure Gentoo enhancements for static builds.
>>>     version 2.03.19 - 21st February 2023
>>>   Configure supports --with-systemd-run executed from udev rules.
>>>   Enhancement for build with MuslC systemd and non-bash system shells (dash).
>>>   Do not reset SYSTEMD_READY variable in udev for PVs on MD and loop devices.
>>>   Ensure udev is processing origin LV before its thick snapshots LVs.
>>>   Fix and improve runtime memory size detection for VDO volumes.
>>>     version 2.03.18 - 22nd December 2022
>>>   Fix issues reported by coverity scan.
>>>   Fix warning for thin pool overprovisioning on lvextend (2.03.17).
>>>   Add support for writecache metadata_only and pause_writeback settings.
>>>   Fix missing error messages in lvmdbusd.
>>>     Version 2.03.17 - 10th November 2022
>>>   Add new options (--fs, --fsmode) for FS handling when resizing LVs.
>>>   Fix 'lvremove -S|--select LV' to not also remove its historical LV
>>> right away.
>>>   Fix lv_active field type to binary so --select and --binary applies properly.
>>>   Switch to use mallinfo2 and use it only with glibc.
>>>   Error out in lvm shell if using a cmd argument not supported in the shell.
>>>   Fix lvm shell's lastlog command to report previous pre-command failures.
>>>   Extend VDO and VDOPOOL without flushing and locking fs.
>>>   Add --valuesonly option to lvmconfig to print only values without keys.
>>>   Updates configure with recent autoconf tooling.
>>>   Fix lvconvert --test --type vdo-pool execution.
>>>   Add json_std output format for more JSON standard compliant version
>>> of output.
>>>   Fix vdo_slab_size_mb value for converted VDO volume.
>>>   Fix many corner cases in device_id, including handling of S/N duplicates.
>>>   Fix various issues in lvmdbusd.
>>>     Version 2.03.16 - 18th May 2022
>>>   Fix segfault when handling selection with historical LVs.
>>>   Add support --vdosettings with lvcreate, lvconvert, lvchange.
>>>   Filtering multipath devices respects blacklist setting from multipath
>>>   configuration.
>>>   lvmdevices support for removing by device id using --deviceidtype and
>>>   --deldev.
>>>   Display writecache block size with lvs -o writecache_block_size.
>>>   Improve cachesettings description in man lvmcache.
>>>   Fix lossing of delete message on thin-pool extension.
>>>     Version 2.03.15 - 07th February 2022
>>>   Remove service based autoactivation. global/event_activation = 0 is NOOP.
>>>   Improve support for metadata profiles for --type writecache.
>>>   Use cache or active DM device when available with new kernels.
>>>   Introduce function to utilize UUIDs from DM_DEVICE_LIST.
>>>   Increase some hash table size to better support large device sets.
>>>     Version 2.03.14 - 20th October 2021
>>>   Device scanning is skipping directories on different filesystems.
>>>   Print info message with too many or too large archived files.
>>>   Reduce metadata readings during scanning phase.
>>>   Optimize computation of crc32 check sum with multiple PVs.
>>>   Enhance recover path on cache creation failure.
>>>   Filter out unsupported MQ/SMQ cache policy setting.
>>>   Fix memleak in mpath filter.
>>>   Support newer location for VDO statistics.
>>>   Add support for VDO async-unsafe write policy.
>>>   Improve lvm_import_vdo script.
>>>   Support VDO LV with lvcreate -ky.
>>>   Fix lvconvert for VDO LV bigger then 2T.
>>>   Create VDO LVs automatically without zeroing.
>>>   Rename vdoimport to lvm_import_vdo.
>>>     Version 2.03.13 - 11th August 2021
>>>   Changes in udev support:
>>>   - obtain_device_list_from_udev defaults to 0.
>>>   - see devices/external_device_info_source,
>>>     devices/obtain_device_list_from_udev, and devices/multipath_wwids_file help
>>>     in lvm.conf
>>>   Fix devices file handling of loop with deleted backing file.
>>>   Fix devices file handling of scsi_debug WWIDs.
>>>   Fix many static analysis issues.
>>>   Support --poolmetadataspare with vgsplit and vgmerge.
>>>   Fix detection of active components of external origin volume.
>>>   Add vdoimport tool to support conversion of VDO volumes.
>>>   Support configurable allocation/vdo_pool_header_size.
>>>   Fix handling of lvconvert --type vdo-pool --virtualsize.
>>>   Simplified handling of archive() and backup() internal calls.
>>>   Add 'idm' locking type for IDM lock manager.
>>>   Fix load of kvdo target when it is not present in memory (2.03.12).
>>>     Version 2.03.12 - 07th May 2021
>>>   Allow attaching cache to thin data volume.
>>>   Fix memleak when generating list of outdated pvs.
>>>   Better hyphenation usage in man pages.
>>>   Replace use of deprecated security_context_t with char*.
>>>   Configure supports AIO_LIBS and AIO_CFLAGS.
>>>   Improve build process for static builds.
>>>   New --setautoactivation option to modify LV or VG auto activation.
>>>   New metadata based autoactivation property for LVs and VGs.
>>>   Improve signal handling with lvmpolld.
>>>   Signal handler can interrupt command also for SIGTERM.
>>>   Lvreduce --yes support.
>>>   Add configure option --with/out-symvers for non-glibc builds.
>>>   Report error when the filesystem is missing on fsadm resized volume.
>>>   Handle better blockdev with --getsize64 support for fsadm.
>>>   Do not include editline/history.h when using editline library.
>>>   Support error and zero segtype for thin-pool data for testing.
>>>   Support mixed extension for striped, error and zero segtypes.
>>>   Support resize also for stacked virtual volumes.
>>>   Skip dm-zero devices just like with dm-error target.
>>>   Reduce ioctl() calls when checking target status.
>>>   Merge polling does not fail, when LV is found to be already merged.
>>>   Poll volumes with at least 100ms delays.
>>>   Do not flush dm cache when cached LV is going to be removed.
>>>   New lvmlockctl_kill_command configuration option.
>>>   Support interruption while waiting on device close before deactivation.
>>>   Flush thin-pool messages before removing more thin volumes.
>>>   Improve hash function with less collisions and make it faster.
>>>   Reduce ioctl count when deactivating volumes.
>>>   Reduce number of metadata parsing.
>>>   Enhance performance of lvremove and vgremove commands.
>>>   Support interruption when taking archive and backup.
>>>   Accelerate large lvremoves.
>>>   Speedup search for cached device nodes.
>>>   Speedup command initialization.
>>>   Add devices file feature, off by default for now.
>>>   Support extension of writecached volumes.
>>>   Fix problem with unbound variable usage within fsadm.
>>>   Fix IMSM MD RAID detection on 4k devices.
>>>   Check for presence of VDO target before starting any conversion.
>>>   Support metatadata profiles with volume VDO pool conversions.
>>>   Support -Zn for conversion of already formated VDO pools.
>>>   Avoid removing LVs on error path of lvconvert during creation volumes.
>>>   Fix crashing lvdisplay when thin volume was waiting for merge.
>>>   Support option --errorwhenfull when converting volume to thin-pool.
>>>   Improve thin-performance profile support conversion to thin-pool.
>>>   Add workaround to avoid read of internal 'converted' devices.
>>>   Prohibit merging snapshot into the read-only thick snapshot origin.
>>>   Restore support for flipping rw/r permissions for thin snapshot origin.
>>>   Support resize of cached volumes.
>>>   Disable autoactivation with global/event_activation=0.
>>>   Check if lvcreate passes read_only_volume_list with tags and skips zeroing.
>>>   Allocation prints better error when metadata cannot fit on a single PV.
>>>   Pvmove can better resolve full thin-pool tree move.
>>>   Limit pool metadata spare to 16GiB.
>>>   Improves conversion and allocation of pool metadata.
>>>   Support thin pool metadata 15.88GiB, adds 64MiB, thin_pool_crop_metadata=0.
>>>   Enhance lvdisplay to report raid available/partial.
>>>   Support online rename of VDO pools.
>>>   Improve removal of pmspare when last pool is removed.
>>>   Fix problem with wiping of converted LVs.
>>>   Fix memleak in scanning  (2.03.11).
>>>   Fix corner case allocation for thin-pools.
>>>     Version 2.03.11 - 08th January 2021
>>>   Fix pvck handling MDA at offset different from 4096.
>>>   Partial or degraded activation of writecache is not allowed.
>>>   Enhance error handling for fsadm and handle correct fsck result.
>>>   Dmeventd lvm plugin ignores higher reserved_stack lvm.conf values.
>>>   Support using BLKZEROOUT for clearing devices.
>>>   Support interruption when wipping LVs.
>>>   Support interruption for bcache waiting.
>>>   Fix bcache when device has too many failing writes.
>>>   Fix bcache waiting for IO completion with failing disks.
>>>   Configure use own python path name order to prefer using python3.
>>>   Add configure --enable-editline support as an alternative to readline.
>>>   Enhance reporting and error handling when creating thin volumes.
>>>   Enable vgsplit for VDO volumes.
>>>   Lvextend of vdo pool volumes ensure at least 1 new VDO slab is added.
>>>   Use revert_lv() on reload error path after vg_revert().
>>>   Configure --with-integrity enabled.
>>>   Restore lost signal blocking while VG lock is held.
>>>   Improve estimation of needed extents when creating thin-pool.
>>>   Use extra 1% when resizing thin-pool metadata LV with --use-policy.
>>>   Enhance --use-policy percentage rounding.
>>>   Configure --with-vdo and --with-writecache as internal segments.
>>>   Improving VDO man page examples.
>>>   Allow pvmove of writecache origin.
>>>   Report integrity fields.
>>>   Integrity volumes defaults to journal mode.
>>>   Switch code base to use flexible array syntax.
>>>   Fix 64bit math when calculation cachevol size.
>>>   Preserve uint32_t for seqno handling.
>>>   Switch from mmap to plain read when loading regular files.
>>>   Update lvmvdo man page and better explain DISCARD usage.
>>>     Version 2.03.10 - 09th August 2020
>>>   Add writecache and integrity support to lvmdbusd.
>>>   Generate unique cachevol name when default required from lvcreate.
>>>   Converting RAID1 volume to one with same number of legs now succeeds with a
>>>   warning.
>>>   Fix conversion to raid from striped lagging type.
>>>   Fix conversion to 'mirrored' mirror log with larger regionsize.
>>>   Zero pool metadata on allocation (disable with allocation/zero_metadata=0).
>>>   Failure in zeroing or wiping will fail command (bypass with -Zn, -Wn).
>>>   Add lvcreate of new cache or writecache lv with single command.
>>>   Fix running out of free buffers for async writing for larger writes.
>>>   Add integrity with raid capability.
>>>   Fix support for lvconvert --repair used by foreign apps (i.e. Docker).
>>>     Version 2.03.09 - 26th March 2020
>>>   Fix formatting of vdopool (vdo_slab_size_mb was smaller by 2 bits).
>>>   Fix showing of a dm kernel error when uncaching a volume with cachevol.
>>>     Version 2.03.08 - 11th February 2020
>>>   Prevent problematic snapshots of writecache volumes.
>>>   Add error handling for failing allocation in _reserve_area().
>>>   Fix memleak in syncing of internal cache.
>>>   Fix pvck dump_current_text memleak.
>>>   Fix lvmlockd result code on error path for _query_lock_lv().
>>>   Update pvck man page and help output.
>>>   Reject invalid writecache high/low_watermark setting.
>>>   Report writecache status.
>>>   Accept more output lines from vdo_format.
>>>   Prohibit reshaping of stacked raid LVs.
>>>   Avoid running cache input arg validation when creating vdo pool.
>>>   Prevent raid reshaping of stacked volumes.
>>>   Added VDO lvmdbusd methods for enable/disable compression & dedupe.
>>>   Added VDO lvmdbusd method for converting LV to VDO pool.
>>>     Version 2.03.07 - 30th November 2019
>>>   Subcommand in vgck for repairing headers and metadata.
>>>   Ensure minimum required region size on striped RaidLV creation.
>>>   Fix resize of thin-pool with data and metadata of different segtype.
>>>   Improve mirror type leg splitting.
>>>   Improve error path handling in daemons on shutdown.
>>>   Fix activation order when removing merged snapshot.
>>>   Experimental VDO support for lvmdbusd.
>>>    Version 2.03.06 - 23rd October 2019
>>>   Add _cpool suffix to cache-pool LV name when used by caching LV.
>>>   No longer store extra UUID for cmeta and cdata cachevol layer.
>>>   Enhance activation of cache devices with cachevols.
>>>   Add _cvol in list of protected suffixes and start use it with DM UUID.
>>>   Rename LV converted to cachevol to use _cvol suffix.
>>>   Use normal LVs for wiping of cachevols.
>>>   Reload cleanered cache DM only with cleaner policy.
>>>   Fix cmd return when zeroing of cachevol fails.
>>>   Extend lvs to show all VDO properties.
>>>   Preserve VDO write policy with vdopool.
>>>   Increase default vdo bio threads to 4.
>>>   Continue report when cache_status fails.
>>>   Add support for DM_DEVICE_GET_TARGET_VERSION into device_mapper.
>>>   Fix cmirrord usage of header files from device_mapper subdir.
>>>   Allow standalone activation of VDO pool just like for thin-pools.
>>>   Activate thin-pool layered volume as 'read-only' device.
>>>   Ignore crypto devices with UUID signature CRYPT-SUBDEV.
>>>   Enhance validation for thin and cache pool conversion and swapping.
>>>   Improve internal removal of cached devices.
>>>   Synchronize with udev when dropping snapshot.
>>>   Add missing device synchronization point before removing pvmove node.
>>>   Correctly set read_ahead for LVs when pvmove is finished.
>>>   Remove unsupported OPTIONS+="event_timeout" udev rule from 11-dm-lvm.rules.
>>>   Prevent creating VGs with PVs with different logical block sizes.
>>>   Fix metadata writes from corrupting with large physical block size.
>>>     Version 2.03.05 - 15th June 2019
>>>   Fix command definition for pvchange -a.
>>>   Add vgck --updatemetadata command that will repair metadata problems.
>>>   Improve VG reading to work if one good copy of metadata is found.
>>>   Report/display/scan commands that read VGs will no longer write/repair.
>>>   Move metadata repairs from VG reading to VG writing.
>>>   Add config setting md_component_checks to control MD component checks.
>>>   Add end of device MD component checks when dev has no udev info.
>>>     Version 2.03.04 - 10th June 2019
>>>   Remove unused_duplicate_devs from cmd causing segfault in dmeventd.
>>>     Version 2.03.03 - 07th June 2019
>>>   Report no_discard_passdown for cache LVs with lvs -o+kernel_discards.
>>>   Add pvck --dump option to extract metadata.
>>>   Fix signal delivery checking race in libdaemon (lvmetad).
>>>   Add missing Before=shutdown.target to LVM2 services to fix shutdown ordering.
>>>   Skip autoactivation for a PV when PV size does not match device size.
>>>   Remove first-pvscan-initialization which should no longer be needed.
>>>   Add remote refresh through lvmlockd/dlm for shared LVs after lvextend.
>>>   Ignore foreign and shared PVs for pvscan online files.
>>>   Add config setting to control fields in debug file and verbose output.
>>>   Add command[pid] and timestamp to debug file and verbose output.
>>>   Fix missing growth of _pmsmare volume when extending _tmeta volume.
>>>   Automatically grow thin metadata, when thin data gets too big.
>>>   Add synchronization with udev before removing cached devices.
>>>   Add support for caching VDO LVs and VDOPOOL LVs.
>>>   Add support for vgsplit with cached devices.
>>>   Query mpath device only once per command for its state.
>>>   Use device INFO instead of STATUS when checking for mpath device uuid.
>>>   Change default io_memory_size from 4 to 8 MiB.
>>>   Add config setting io_memory_size to set bcache size.
>>>   Fix pvscan autoactivation for concurrent pvscans.
>>>   Change scan_lvs default to 0 so LVs are not scanned for PVs.
>>>   Thin-pool selects power-of-2 chunk size by default.
>>>   Cache selects power-of-2 chunk size by default.
>>>   Support reszing for VDOPoolLV and VDOLV.
>>>   Improve -lXXX%VG modifier which improves cache segment estimation.
>>>   Ensure migration_threshold for cache is at least 8 chunks.
>>>   Restore missing man info lvcreate --zero for thin-pools.
>>>   Drop misleadning comment for metadata minimum_io_size for VDO segment.
>>>   Add device hints to reduce scanning.
>>>   Introduce LVM_SUPPRESS_SYSLOG to suppress syslog usage by generator.
>>>   Fix generator quering lvmconfig unpresent config option.
>>>   Fix memleak on bcache error path code.
>>>   Fix missing unlock on lvm2 dmeventd plugin error path initialization.
>>>   Improve Makefile dependency tracking.
>>>   Move VDO support towards V2 target (6.2) support.
>>>     Version 2.03.02 - 18th December 2018
>>>   Fix missing proper initialization of pv_list struct when adding pv.
>>>   Fix (de)activation of RaidLVs with visible SubLVs.
>>>   Prohibit mirrored 'mirror' log via lvcreate and lvconvert.
>>>   Use sync io if async io_setup fails, or use_aio=0 is set in config.
>>>   Fix more issues reported by coverity scan.
>>>     Version 2.03.01 - 31st October 2018
>>>     Version 2.03.00 - 10th October 2018
>>>   Add hot fix to avoiding locking collision when monitoring thin-pools.
>>>   Allow raid4 -> linear conversion request.
>>>   Fix lvconvert striped/raid0/raid0_meta -> raid6 regression.
>>>   Add 'lvm2-activation-generator:' prefix for kmsg messages logged by
>>> generator.
>>>   Add After=rbdmap.service to {lvm2-activation-net,blk-availability}.service.
>>>   Reduce max concurrent aios to avoid EMFILE with many devices.
>>>   Fix lvconvert conversion attempts to linear.
>>>   Fix lvconvert raid0/raid0_meta -> striped regression.
>>>   Fix lvconvert --splitmirror for mirror type (2.02.178).
>>>   Do not pair cache policy and cache metadata format.
>>>   lvconvert: reject conversions on raid1 LVs with split tracked SubLVs
>>>   lvconvert: reject conversions on raid1 split tracked SubLVs
>>>   Add basic creation support for VDO target.
>>>   Never send any discard ioctl with test mode.
>>>   Fix thin-pool alloc which needs same PV for data and metadata.
>>>   Extend list of non-memlocked areas with newly linked libs.
>>>   Enhance vgcfgrestore to check for active LVs in restored VG.
>>>   Configure supports --disable-silent-rules for verbose builds.
>>>   Fix unmonitoring of merging snapshots.
>>>   Cache can uses metadata format 2 with cleaner policy.
>>>   Fix check if resized PV can also fit metadata area.
>>>   Avoid showing internal error in lvs output or pvmoved LVs.
>>>   Remove clvmd
>>>   Remove lvmlib (api)
>>>   Remove lvmetad
>>>   Use versionsort to fix archive file expiry beyond 100000 files.
>>> Signed-off-by: Adolf Belka <adolf.belka(a)ipfire.org>
>>> ---
>>> config/rootfiles/common/lvm2 | 16 +++++++++++-----
>>> lfs/lvm2                     |  6 +++---
>>> 2 files changed, 14 insertions(+), 8 deletions(-)
>>> diff --git a/config/rootfiles/common/lvm2 b/config/rootfiles/common/lvm2
>>> index 258f3201f..bd1329e54 100644
>>> --- a/config/rootfiles/common/lvm2
>>> +++ b/config/rootfiles/common/lvm2
>>> @@ -9,15 +9,17 @@ etc/lvm/lvm.conf
>>> #etc/lvm/profile/metadata_profile_template.profile
>>> #etc/lvm/profile/thin-generic.profile
>>> #etc/lvm/profile/thin-performance.profile
>>> +#etc/lvm/profile/vdo-small.profile
>>> lib/udev/rules.d/10-dm.rules
>>> lib/udev/rules.d/11-dm-lvm.rules
>>> lib/udev/rules.d/13-dm-disk.rules
>>> -lib/udev/rules.d/69-dm-lvm-metad.rules
>>> +lib/udev/rules.d/69-dm-lvm.rules
>>> lib/udev/rules.d/95-dm-notify.rules
>>> #usr/include/libdevmapper.h
>>> #usr/lib/libdevmapper.so
>>> usr/lib/libdevmapper.so.1.02
>>> #usr/lib/pkgconfig/devmapper.pc
>>> +#usr/libexec/lvresize_fs_helper
>>> usr/sbin/blkdeactivate
>>> usr/sbin/dmsetup
>>> usr/sbin/dmstats
>>> @@ -28,11 +30,11 @@ usr/sbin/lvcreate
>>> usr/sbin/lvdisplay
>>> usr/sbin/lvextend
>>> usr/sbin/lvm
>>> -usr/sbin/lvmconf
>>> +usr/sbin/lvm_import_vdo
>>> usr/sbin/lvmconfig
>>> +usr/sbin/lvmdevices
>>> usr/sbin/lvmdiskscan
>>> usr/sbin/lvmdump
>>> -usr/sbin/lvmetad
>>> usr/sbin/lvmsadc
>>> usr/sbin/lvmsar
>>> usr/sbin/lvreduce
>>> @@ -61,6 +63,7 @@ usr/sbin/vgexport
>>> usr/sbin/vgextend
>>> usr/sbin/vgimport
>>> usr/sbin/vgimportclone
>>> +usr/sbin/vgimportdevices
>>> usr/sbin/vgmerge
>>> usr/sbin/vgmknodes
>>> usr/sbin/vgreduce
>>> @@ -70,11 +73,13 @@ usr/sbin/vgs
>>> usr/sbin/vgscan
>>> usr/sbin/vgsplit
>>> #usr/share/man/man5/lvm.conf.5
>>> +#usr/share/man/man7/lvmautoactivation.7
>>> #usr/share/man/man7/lvmcache.7
>>> #usr/share/man/man7/lvmraid.7
>>> #usr/share/man/man7/lvmreport.7
>>> #usr/share/man/man7/lvmsystemid.7
>>> #usr/share/man/man7/lvmthin.7
>>> +#usr/share/man/man7/lvmvdo.7
>>> #usr/share/man/man8/blkdeactivate.8
>>> #usr/share/man/man8/dmsetup.8
>>> #usr/share/man/man8/dmstats.8
>>> @@ -89,11 +94,11 @@ usr/sbin/vgsplit
>>> #usr/share/man/man8/lvm-fullreport.8
>>> #usr/share/man/man8/lvm-lvpoll.8
>>> #usr/share/man/man8/lvm.8
>>> -#usr/share/man/man8/lvmconf.8
>>> +#usr/share/man/man8/lvm_import_vdo.8
>>> #usr/share/man/man8/lvmconfig.8
>>> +#usr/share/man/man8/lvmdevices.8
>>> #usr/share/man/man8/lvmdiskscan.8
>>> #usr/share/man/man8/lvmdump.8
>>> -#usr/share/man/man8/lvmetad.8
>>> #usr/share/man/man8/lvmsadc.8
>>> #usr/share/man/man8/lvmsar.8
>>> #usr/share/man/man8/lvreduce.8
>>> @@ -122,6 +127,7 @@ usr/sbin/vgsplit
>>> #usr/share/man/man8/vgextend.8
>>> #usr/share/man/man8/vgimport.8
>>> #usr/share/man/man8/vgimportclone.8
>>> +#usr/share/man/man8/vgimportdevices.8
>>> #usr/share/man/man8/vgmerge.8
>>> #usr/share/man/man8/vgmknodes.8
>>> #usr/share/man/man8/vgreduce.8
>>> diff --git a/lfs/lvm2 b/lfs/lvm2
>>> index 7e327a021..5b39f05f5 100644
>>> --- a/lfs/lvm2
>>> +++ b/lfs/lvm2
>>> @@ -1,7 +1,7 @@
>>> ###############################################################################
>>> #                                                                             #
>>> # IPFire.org - A linux based firewall                                         #
>>> -# Copyright (C) 2007-2018  IPFire Team  <info(a)ipfire.org>                     #
>>> +# Copyright (C) 2007-2023  IPFire Team  <info(a)ipfire.org>                     #
>>> #                                                                             #
>>> # This program is free software: you can redistribute it and/or modify        #
>>> # it under the terms of the GNU General Public License as published by        #
>>> @@ -24,7 +24,7 @@
>>> include Config
>>> -VER        = 2.02.188
>>> +VER        = 2.03.21
>>> THISAPP    = LVM2.$(VER)
>>> DL_FILE    = $(THISAPP).tgz
>>> @@ -40,7 +40,7 @@ objects = $(DL_FILE)
>>> $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
>>> -$(DL_FILE)_BLAKE2 =
>>> bed90c8454cd4b20fdeec6dcbf5a9f97c9310671aea3b2252f8069cfa439fcb050f5ad95f928a7125a1734a4dc5ac985da99a4a570538e377a7205191a505476
>>> +$(DL_FILE)_BLAKE2 =
>>> 529bc01b3d1ba6207c9ddc95309b39e6293fcd0286334240b9fdc076da0b7bc7e026338ec0243564ec153f2fb5009014149c3f8e0db0cd47a29418af62068728
>>> install : $(TARGET)
> 

-- 
Sent from my laptop