Good morning Adlof,
thanks for confirming.

Best,

Erik

Am Montag, den 30.11.2020, 15:41 +0100 schrieb Adolf Belka:
> Hi Erik,
> 
> I reverted back to OpenVPN-2.4.9 and had working clients. If I go
> into an existing client in edit mode and just press save then the
> "Download Insecure Client Package (zip)" icon also appears and if
> pressed also comes up with the Internal Server Error. So there is a
> problem with this but not related to your work on OpenVPN.
> 
> However, with 2.4.9 when I press the OpenVPN Connection Statistics
> button, I very quickly have statistics information on my open
> connections whereas nothing showed at all with the new ovpnmain.cgi.
> 
> Regards,
> 
> Adolf.
> 
> 
> On 30/11/2020 15:19, Adolf Belka wrote:
> > Hi Erik,
> > 
> > 
> > On 30/11/2020 13:41, ummeegge wrote:
> > > Hi Adolf,
> > > if you have time can you please make a short test with the new
> > > cgi ? If
> > > you press the yellow pencile for an existing RW connection and
> > > without
> > > modification, press only the save button, please use if presant
> > > one
> > > connection which have a zone in "Client has access to these
> > > networks on
> > > IPFire's site" configured.
> > > 
> > > I get currently a error message
> > > "Route 192.168.2.0/255.255.255.0 Already used by another client.
> > > (192.168.2.0/255.255.255.0) ". Am working in this section for a
> > > menu to
> > > modify new but also existing client configuration to give the
> > > possiblity to set also the new --data-ciphers directive but i get
> > > this
> > > error also after reverting the code... Tomatoes on eyes
> > > currently...
> > > 
> > > It might great to have there a feedback from you if this works
> > > you.
> > 
> > I get no error message when I press save. This is whether the
> > client is connected or is not connected via the vpn. The only thing
> > I had happen is that the icon for "Download Insecure Client Package
> > (zip)" becomes present and if I click on that then I get an
> > Internal Server Error message. All other icons work fine. All other
> > existing clients do not have the insecure client package icon.
> > 
> > The only other thing I have noticed is that if I click on the
> > OpenVPN Connection Statistics button I get a screen with a table
> > with the headings but no data showing. Not sure if this is related
> > to the work you are doing. I will revert back to the 2.4.9 version
> > and see if something shows in that table after a while.
> > 
> > Hope this helps,
> > 
> > Regards,
> > 
> > Adolf
> > 
> > > 
> > > Best,
> > > 
> > > Erik
> > > 
> > > Am Sonntag, den 29.11.2020, 14:12 +0100 schrieb Adolf Belka:
> > > > Hi Erik,
> > > > 
> > > > I have successfully installed OpenVPN-2.5.0 and the new
> > > > ovpnmain.cgi
> > > > and language files onto my system. Everything is working fine.
> > > > I can
> > > > see the new tab for encryption options. All my existing
> > > > settings were
> > > > maintained. All three of my clients are able to successfully
> > > > connect
> > > > with no problem and are connecting with the encryption options
> > > > I have
> > > > previously specified.
> > > > 
> > > > I have not had to modify anything for it to successfully work
> > > > with
> > > > the existing settings.
> > > > 
> > > > Looks very nice. Congratulations on your work so far. Hopefully
> > > > more
> > > > testers will also not have any problems (fingers crossed).
> > > > 
> > > > Regards,
> > > > 
> > > > Adolf.
> > > > 
> > > > 
> > > > On 29/11/2020 12:15, ummeegge wrote:
> > > > > Hi all,
> > > > > another bug has been fixed -->
> > > > > https://git.ipfire.org/?p=people/ummeegge/ipfire-2.x.git;a=commit;h=211bce2dc6f9a3c0fcdee61f3afc0d3c2283f375
> > > > > . If the save button in the global section is used, it
> > > > > deletes the
> > > > > --auth parameter, this diff fixes it.
> > > > > for manual changes:
> > > > > 
> > > > > --- /srv/web/ipfire/cgi-
> > > > > bin/ovpnmain.cgi_advanced_encryption    2020-
> > > > > 11-27 10:37:47.405168037 +0100
> > > > > +++ /srv/web/ipfire/cgi-bin/ovpnmain.cgi        2020-11-29
> > > > > 11:59:02.846338304 +0100
> > > > > @@ -1303,7 +1303,6 @@
> > > > >        $vpnsettings{'DDEST_PORT'} = $cgiparams{'DDEST_PORT'};
> > > > >        $vpnsettings{'DMTU'} = $cgiparams{'DMTU'};
> > > > >        $vpnsettings{'DCOMPLZO'} = $cgiparams{'DCOMPLZO'};
> > > > > -    $vpnsettings{'DAUTH'} = $cgiparams{'DAUTH'};
> > > > >    #wrtie enable
> > > > >         if ( $vpnsettings{'ENABLED_BLUE'} eq 'on' )
> > > > > {system("touch
> > > > > ${General::swroot}/ovpn/enable_blue
> > > > > 2>/dev/null");}else{system("unlink
> > > > > ${General::swroot}/ovpn/enable_blue 2>/dev/null");}
> > > > > 
> > > > > 
> > > > > Am Samstag, den 28.11.2020, 06:52 +0100 schrieb ummeegge:
> > > > > Hi all,
> > > > > made some fixes
> > > > > 
> > > > > - --tls-auth will now be displayed and saved correctly.
> > > > > - de.pl needed other 'save-enc-options' name since it was a
> > > > > double.
> > > > >       Fixes tls-crypt key generation.
> > > > > - Fixed comments and changed box size to prevent line break.
> > > > > 
> > > > > New version is here
> > > > > 
> > > > > https://git.ipfire.org/?p=people/ummeegge/ipfire-2.x.git;a=commit;h=7bd13546f3c5e28fd62e25b487e440690860339b
> > > > > 
> > > > > located.
> > > > > 
> > > > > Best,
> > > > > 
> > > > > Erik
> > > > > 
> > > > > 
> > > > > Am Donnerstag, den 26.11.2020, 19:47 +0100 schrieb ummeegge:
> > > > > Hi all,
> > > > > for the interested ones, have push the current state to my
> > > > > repo
> > > > > which
> > > > > can be found in here -->
> > > > > https://git.ipfire.org/?p=people/ummeegge/ipfire-2.x.git;a=commit;h=34af1d714178b2cd0c27e8c39052a8c7ce87d116
> > > > > feel free to test and criticize it :-) .
> > > > > 
> > > > > After integration and configuration, the 'save' button in the
> > > > > global
> > > > > section should also be pushed since --cipher will replaced by
> > > > > --
> > > > > data-
> > > > > channel-fallback. For the langs files, a update-lang-cache
> > > > > should
> > > > > be
> > > > > executed via console so the changes can take affect.
> > > > > 
> > > > > Happy testing. Best,
> > > > > 
> > > > > Erik
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > > > 
> > > 
> > >