Hi!

This was triggered by https://git.ipfire.org/?p=ipfire-2.x.git;a=commitdiff;h=37458540bf727df09989c10d640ad13c1a989029

I thought some cpu graphs on my "Duo Box" could be helpful and installed
'cpufrequtils'.

But after adding the above commit to '/etc/init.d/collectd'
and restarting 'collectd' => no graphs appeared.

Reason:
The needed directory '/sys/devices/system/cpu/cpufreq/policy0/' doesn't
exist on my machine, so the 'LoadPlugin' was always commented and
deactivated.

Instead there are '/sys/devices/system/cpu/cpu0' and
'/sys/devices/system/cpu/cpu1'.

So I tested this the hard way.

After commenting the if-statement, everything is working, CPU graphs
appear and show reasonable values:

...
# Enable cpufreq plugin if cpufreq found
#if [ ! -e  /sys/devices/system/cpu/cpufreq/policy0/*_cur_freq ]; then
#	sed -i -e "s|^LoadPlugin cpufreq|#LoadPlugin cpufreq|g" /etc/collectd.conf
#else
	sed -i -e "s|^#LoadPlugin cpufreq|LoadPlugin cpufreq|g" /etc/collectd.conf
#fi
...

Changed this to:

...
if [ ! -e /sys/devices/system/cpu/cpu0/cpufreq/*_cur_freq ]; then
..

But this gave me an error:

/etc/init.d/collectd: line 95: [: /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq: binary operator expected

I changed the line to:

...
if [ ! -e /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq ]; then
...

And now it is running as expected.

Would this be ok for other machines?
Bug or feature - can anyone confirm?

Best,
Matthias

P.S.: I didn't forget the Telko - I was still at work. Too bad...