Hi Michael, On 08/02/2021 14:37, Michael Tremer wrote: > Hello, > > Did you try adding —-with-fp-layout=nothing to configure? No I didn't. I had to search for it to find out what it was. Once knowing, it makes sense. I even then found that it is in the readme for collectd. As I said I am heavily learning with all this stuff, so thanks for all the help and support. Will give that command a go and hopefully I will be able to provide a successful patch. Regards, Adolf. > >> On 6 Feb 2021, at 13:10, Adolf Belka wrote: >> >> Hi, >> >> On 05/02/2021 18:59, Michael Tremer wrote: >>> Hi, >>>> On 5 Feb 2021, at 17:25, Adolf Belka wrote: >>>> >>>> Hi Michael, >>>> >>>> On 05/02/2021 17:13, Michael Tremer wrote: >>>>> Hello, >>>>> It looks like this configure script is simply incompatible with newer versions of autoconf. >>>>> The only option I see is to manually update it and patch it. Unfortunately we are stuck on collectd 4.10 and cannot really update it without breaking things. That is quite annoying, but I guess updating configure.ac is easier than migrating to collectd 5 or whatever is the newest release right now. >>>>> Did you try running “autoupdate” as it is being suggested in the error message? >>>> No I had not tried it. I don't really have any excuse for why that message did not register in my mind when I was looking through the log file, especially as it is repeated numerous times. :-) Oh well. >>> I didn’t see it first either. I just saw it later on the quoted part of the email when I typed a response :) >>>> I have looked up what autoupdate is and how to use it and I will give it a go and see what happens. >>> Just run it and see if it converts things properly. If not, we will need to do it manually. >> >> I ran autoupdate -v configure.in after all the patch files were run. >> The previous warning messages about needing to run autoupdate dissappeared. It did warn that >> >> aclocal.m4:16: warning: this file was generated for autoconf 2.67. >> You have another version of autoconf. It may work, but is not guaranteed to. >> If you have problems, you may need to regenerate the build system entirely. >> To do so, use the procedure documented by the package, typically `autoreconf'. >> >> and finished with >> >> autoupdate: 'configure.in' is updated >> >> However, during running the .configure it ended up with the same error message about how doubles are stored in memory. >> There are various messages about remembering to add or considering to add certain bits to configure.in but I am not sure which to follow or how to actually add them to configure.in >> >> I have removed the old log file details at the end of this mail and inserted the new log file messages for the build of collectd. >> >> Adolf. >>> -Michael >>>> Thanks for the pointer. >>>> >>>> Regards, >>>> Adolf. >>>>> -Michael >>>>>> On 5 Feb 2021, at 13:08, Adolf Belka wrote: >>>>>> >>>>>> Hi all, >>>>>> >>>>>> I have been trying to update autoconf from version 2.69 to 2.71 but I have been getting a build failure from collectd when I do that. >>>>>> >>>>>> I made autoconf the only update being carried out after having done a git pull from next. the same failure occurred. >>>>>> >>>>>> The final error message is:- >>>>>> >>>>>> -checking if doubles are stored in x86 representation... ./configure: line 15649: ac_fn_c_try_run: command not found >>>>>> -no >>>>>> -checking if endianflip converts to x86 representation... ./configure: line 15733: ac_fn_c_try_run: command not found >>>>>> -no >>>>>> -checking if intswap converts to x86 representation... ./configure: line 15811: ac_fn_c_try_run: command not found >>>>>> -no >>>>>> -configure: error: Didn't find out how doubles are stored in memory. Sorry. >>>>>> -make: *** [collectd:111: /usr/src/log/collectd-4.10.9] Error 1 >>>>>> >>>>>> Full log for collectd build is below. >>>>>> >>>>>> As a test I also tried updating from 2.69 to 2.70 but this then failed at coreutils with a totally different fail message. If required I also have the log file for the coreutils build >>>>>> >>>>>> I have run out of ideas for how to fix this. I found the ac_fn_c_try_run command in the collectd configure file but could not figure out what relation it might have to autoconf and the version change. >>>>>> >>>>>> Any pointers on what I should look at or do to fix this would be very valued. >>>>>> >>>>>> Regards, >>>>>> >>>>>> Adolf. >>>>>> >> >> ------------------------------------------------- >> Feb 6 11:48:34: Building collectd collectd-4.10.9.tar.bz2 checksum OK >> + cd /usr/src/lfs >> + make -f collectd LFS_BASEDIR=/usr/src install >> ====================================== Installing collectd-4.10.9 ... >> Install started; saving file list to /usr/src/lsalr ... >> cd /usr/src/collectd-4.10.9 && find . -name "Makefile.*" | xargs sed -e "s/-Werror//g" -i >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0001-src-utils_mount.h-Add-stdio.h.patch >> patching file src/utils_mount.h >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0002-Don-t-notify-continuously-when-MySQL-slave-SQL-threa.patch >> patching file src/mysql.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0003-curl_xml.c-avoid-using-uninitalized-variable-in-erro.patch >> patching file src/curl_xml.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0004-interface.c-FreeBSD-10-support.patch >> patching file src/interface.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0005-Revert-curl_xml.c-avoid-using-uninitalized-variable-.patch >> patching file src/curl_xml.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0006-network-set_thread_cbs-so-we-initialize-the-right-th.patch >> patching file src/network.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0007-apache-plugin-Call-curl_global_init-from-the-init-fu.patch >> patching file src/apache.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0008-network-comment-libgcrypt-initalization-process.patch >> patching file src/network.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0009-Call-curl_global_init-in-_init-of-plugins-using-curl.patch >> patching file src/curl.c >> patching file src/curl_json.c >> patching file src/curl_xml.c >> patching file src/write_http.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0010-indent-wh_init-to-be-consistent-with-the-rest-of-the.patch >> patching file src/write_http.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0011-Configparser-when-we-alocate-an-empty-list-we-also-n.patch >> patching file src/configfile.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0012-don-t-assume-pkg-config-is-in-PATH.patch >> patching file configure.in >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0013-add-missing-backticks-which-broke-the-build.patch >> patching file configure.in >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0014-snmp-free-snmp_pdu-struct-allocated-by-snmp_pdu_crea.patch >> patching file src/snmp.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0015-curl_xml-plugin-Fixed-tautological-pointer-compariso.patch >> patching file src/curl_xml.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0016-Add-support-for-OpenVPN-2.3.0-status-files.patch >> patching file src/openvpn.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0017-openvpn-plugin-Don-t-signal-an-error-when-no-clients.patch >> patching file src/openvpn.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0018-openvpn-Remove-boguous-file-handler-check.patch >> patching file src/openvpn.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0019-openvpn-Ignore-not-fully-established-connections.patch >> patching file src/openvpn.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0020-openvpn-Make-read-functions-robust-like-in-8516f9abb.patch >> patching file src/openvpn.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0021-openvpn-Fix-copy-and-paste-error.patch >> patching file src/openvpn.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/0022-openvpn-Change-data-type-from-COUNTER-to-DERIVE.patch >> patching file src/openvpn.c >> patching file src/types.db >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd/silence-openvpn-errors.patch >> patching file src/openvpn.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd-4.10.9-xfs-compile-fix.patch >> patching file src/utils_mount.c >> cd /usr/src/collectd-4.10.9 && patch -p1 -i /usr/src/src/patches/collectd-4.10-libiptc-build-fixes.patch >> patching file src/Makefile.am >> cd /usr/src/collectd-4.10.9 && autoupdate -v configure.in >> autoupdate: running: echo dumpdef | /tools_x86_64/bin/m4 2>/tmp/au0JiQkO/m4.defs >/dev/null >> autom4te: the trace request object is: >> autom4te: $VAR1 = bless( [ >> autom4te: '0', >> autom4te: 0, >> autom4te: [ >> autom4te: '/usr/share/autoconf' >> autom4te: ], >> autom4te: [ >> autom4te: '/usr/share/autoconf/m4sugar/m4sugar.m4', >> autom4te: '/usr/share/autoconf/m4sugar/m4sh.m4', >> autom4te: '/usr/share/autoconf/autoconf/autoconf.m4', >> autom4te: 'aclocal.m4', >> autom4te: '/dev/null' >> autom4te: ], >> autom4te: { >> autom4te: 'AC_SUBST_TRACE' => 1, >> autom4te: 'AM_PROG_CXX_C_O' => 1, >> autom4te: '_AM_MAKEFILE_INCLUDE' => 1, >> autom4te: 'AC_FC_SRCEXT' => 1, >> autom4te: 'AM_PROG_AR' => 1, >> autom4te: 'LT_CONFIG_LTDL_DIR' => 1, >> autom4te: 'AC_REQUIRE_AUX_FILE' => 1, >> autom4te: 'AM_SILENT_RULES' => 1, >> autom4te: 'AC_CONFIG_HEADERS' => 1, >> autom4te: 'AM_ENABLE_MULTILIB' => 1, >> autom4te: 'AC_CANONICAL_HOST' => 1, >> autom4te: 'AM_PROG_CC_C_O' => 1, >> autom4te: 'AC_CONFIG_MACRO_DIR_TRACE' => 1, >> autom4te: 'AC_CANONICAL_SYSTEM' => 1, >> autom4te: 'AM_PROG_MOC' => 1, >> autom4te: 'AC_INIT' => 1, >> autom4te: 'AC_CONFIG_LIBOBJ_DIR' => 1, >> autom4te: 'm4_pattern_allow' => 1, >> autom4te: 'AC_CONFIG_AUX_DIR' => 1, >> autom4te: 'AC_CANONICAL_TARGET' => 1, >> autom4te: 'm4_sinclude' => 1, >> autom4te: 'AM_MAKEFILE_INCLUDE' => 1, >> autom4te: 'AU_DEFINE' => 1, >> autom4te: '_LT_AC_TAGCONFIG' => 1, >> autom4te: 'AC_CANONICAL_BUILD' => 1, >> autom4te: 'm4_pattern_forbid' => 1, >> autom4te: '_m4_warn' => 1, >> autom4te: 'AC_DEFINE_TRACE_LITERAL' => 1, >> autom4te: 'm4_define' => 1, >> autom4te: '_AM_COND_IF' => 1, >> autom4te: 'AM_PROG_FC_C_O' => 1, >> autom4te: 'AM_MAINTAINER_MODE' => 1, >> autom4te: 'AM_GNU_GETTEXT' => 1, >> autom4te: '_AM_COND_ELSE' => 1, >> autom4te: 'define' => 1, >> autom4te: 'AM_NLS' => 1, >> autom4te: 'AC_SUBST' => 1, >> autom4te: 'AM_EXTRA_RECURSIVE_TARGETS' => 1, >> autom4te: 'AM_CONDITIONAL' => 1, >> autom4te: 'LT_INIT' => 1, >> autom4te: 'AM_PROG_F77_C_O' => 1, >> autom4te: 'AM_GNU_GETTEXT_INTL_SUBDIR' => 1, >> autom4te: 'AM_AUTOMAKE_VERSION' => 1, >> autom4te: 'AM_INIT_AUTOMAKE' => 1, >> autom4te: 'AM_PROG_LIBTOOL' => 1, >> autom4te: 'AC_PROG_LIBTOOL' => 1, >> autom4te: 'AM_XGETTEXT_OPTION' => 1, >> autom4te: 'GTK_DOC_CHECK' => 1, >> autom4te: 'AC_CONFIG_FILES' => 1, >> autom4te: 'AM_PROG_MKDIR_P' => 1, >> autom4te: 'AC_FC_FREEFORM' => 1, >> autom4te: 'include' => 1, >> autom4te: 'AH_OUTPUT' => 1, >> autom4te: 'AC_CONFIG_SUBDIRS' => 1, >> autom4te: 'AC_CONFIG_LINKS' => 1, >> autom4te: 'IT_PROG_INTLTOOL' => 1, >> autom4te: '_AM_SUBST_NOTMAKE' => 1, >> autom4te: 'AC_LIBSOURCE' => 1, >> autom4te: 'AM_POT_TOOLS' => 1, >> autom4te: 'm4_include' => 1, >> autom4te: '_AM_COND_ENDIF' => 1, >> autom4te: 'AC_FC_PP_DEFINE' => 1, >> autom4te: 'AC_FC_PP_SRCEXT' => 1, >> autom4te: 'sinclude' => 1, >> autom4te: 'LT_SUPPORTED_TAG' => 1, >> autom4te: 'AM_PATH_GUILE' => 1 >> autom4te: } >> autom4te: ], 'Autom4te::Request' ); >> autom4te: running: /tools_x86_64/bin/m4 --nesting-limit=1024 --gnu --include=/usr/share/autoconf --debug=aflq --fatal-warning --debugfile=autom4te.cache/traces.0t --trace=AC_CANONICAL_BUILD --trace=AC_CANONICAL_HOST --trace=AC_CANONICAL_SYSTEM --trace=AC_CANONICAL_TARGET --trace=AC_CONFIG_AUX_DIR --trace=AC_CONFIG_FILES --trace=AC_CONFIG_HEADERS --trace=AC_CONFIG_LIBOBJ_DIR --trace=AC_CONFIG_LINKS --trace=AC_CONFIG_MACRO_DIR_TRACE --trace=AC_CONFIG_SUBDIRS --trace=AC_DEFINE_TRACE_LITERAL --trace=AC_FC_FREEFORM --trace=AC_FC_PP_DEFINE --trace=AC_FC_PP_SRCEXT --trace=AC_FC_SRCEXT --trace=AC_INIT --trace=AC_LIBSOURCE --trace=AC_PROG_LIBTOOL --trace=AC_REQUIRE_AUX_FILE --trace=AC_SUBST --trace=AC_SUBST_TRACE --trace=AH_OUTPUT --trace=AM_AUTOMAKE_VERSION --trace=AM_CONDITIONAL --trace=AM_ENABLE_MULTILIB --trace=AM_EXTRA_RECURSIVE_TARGETS --trace=AM_GNU_GETTEXT --trace=AM_GNU_GETTEXT_INTL_SUBDIR --trace=AM_INIT_AUTOMAKE --trace=AM_MAINTAINER_MODE --trace=AM_MAKEFILE_INCLUDE --trace=AM_NLS --trace=AM_PATH_GUILE --trace=AM_POT_TOOLS --trace=AM_PROG_AR --trace=AM_PROG_CC_C_O --trace=AM_PROG_CXX_C_O --trace=AM_PROG_F77_C_O --trace=AM_PROG_FC_C_O --trace=AM_PROG_LIBTOOL --trace=AM_PROG_MKDIR_P --trace=AM_PROG_MOC --trace=AM_SILENT_RULES --trace=AM_XGETTEXT_OPTION --trace=AU_DEFINE --trace=GTK_DOC_CHECK --trace=IT_PROG_INTLTOOL --trace=LT_CONFIG_LTDL_DIR --trace=LT_INIT --trace=LT_SUPPORTED_TAG --trace=_AM_COND_ELSE --trace=_AM_COND_ENDIF --trace=_AM_COND_IF --trace=_AM_MAKEFILE_INCLUDE --trace=_AM_SUBST_NOTMAKE --trace=_LT_AC_TAGCONFIG --trace=_m4_warn --trace=define --trace=include --trace=m4_define --trace=m4_include --trace=m4_pattern_allow --trace=m4_pattern_forbid --trace=m4_sinclude --trace=sinclude /usr/share/autoconf/m4sugar/m4sugar.m4 /usr/share/autoconf/m4sugar/m4sh.m4 /usr/share/autoconf/autoconf/autoconf.m4 aclocal.m4 /dev/null > autom4te.cache/output.0t >> aclocal.m4:16: warning: this file was generated for autoconf 2.67. >> You have another version of autoconf. It may work, but is not guaranteed to. >> If you have problems, you may need to regenerate the build system entirely. >> To do so, use the procedure documented by the package, typically `autoreconf'. >> autom4te: formatting traces for '/tmp/am4tMWPbON/warnings': _m4_warn >> autom4te: reading /tmp/am4tMWPbON/warnings >> autom4te: formatting traces for '-': AU_DEFINE, define, m4_define >> autoupdate: running: /usr/bin/autom4te --language=autoconf --verbose --include=/usr/share/autoconf --trace AU_DEFINE:'_au_defun(@<:@$1@:>@, >> autoupdate: @<:@$2@:>@)' --melt /dev/null >/tmp/au0JiQkO/au.m4 >> autom4te: formatting traces for '/tmp/am4tkPPwdb/dependencies': include, m4_include >> autom4te: up_to_date (autom4te.cache/traces.0): up to date >> autom4te: the trace request object is: >> autom4te: $VAR1 = bless( [ >> autom4te: '0', >> autom4te: 1, >> autom4te: [ >> autom4te: '/usr/share/autoconf' >> autom4te: ], >> autom4te: [ >> autom4te: '/usr/share/autoconf/m4sugar/m4sugar.m4', >> autom4te: '/usr/share/autoconf/m4sugar/m4sh.m4', >> autom4te: '/usr/share/autoconf/autoconf/autoconf.m4', >> autom4te: 'aclocal.m4', >> autom4te: '/dev/null' >> autom4te: ], >> autom4te: { >> autom4te: 'AC_CONFIG_LINKS' => 1, >> autom4te: 'AM_SILENT_RULES' => 1, >> autom4te: 'AH_OUTPUT' => 1, >> autom4te: 'AC_FC_SRCEXT' => 1, >> autom4te: 'GTK_DOC_CHECK' => 1, >> autom4te: 'AM_MAKEFILE_INCLUDE' => 1, >> autom4te: 'AC_CANONICAL_TARGET' => 1, >> autom4te: 'AM_EXTRA_RECURSIVE_TARGETS' => 1, >> autom4te: 'm4_define' => 1, >> autom4te: 'AM_ENABLE_MULTILIB' => 1, >> autom4te: 'm4_pattern_forbid' => 1, >> autom4te: 'AM_PROG_AR' => 1, >> autom4te: 'AM_AUTOMAKE_VERSION' => 1, >> autom4te: 'AC_CANONICAL_BUILD' => 1, >> autom4te: 'AM_XGETTEXT_OPTION' => 1, >> autom4te: 'define' => 1, >> autom4te: 'AC_FC_FREEFORM' => 1, >> autom4te: 'AC_CANONICAL_SYSTEM' => 1, >> autom4te: 'AM_MAINTAINER_MODE' => 1, >> autom4te: 'AM_PROG_FC_C_O' => 1, >> autom4te: 'AC_SUBST_TRACE' => 1, >> autom4te: 'AC_FC_PP_DEFINE' => 1, >> autom4te: 'AM_GNU_GETTEXT_INTL_SUBDIR' => 1, >> autom4te: 'AC_CANONICAL_HOST' => 1, >> autom4te: 'AC_CONFIG_LIBOBJ_DIR' => 1, >> autom4te: 'AC_FC_PP_SRCEXT' => 1, >> autom4te: '_AM_MAKEFILE_INCLUDE' => 1, >> autom4te: '_AM_COND_ENDIF' => 1, >> autom4te: 'AM_PROG_MOC' => 1, >> autom4te: 'AM_POT_TOOLS' => 1, >> autom4te: 'AM_INIT_AUTOMAKE' => 1, >> autom4te: 'AC_CONFIG_FILES' => 1, >> autom4te: 'LT_INIT' => 1, >> autom4te: 'AC_PROG_LIBTOOL' => 1, >> autom4te: 'm4_pattern_allow' => 1, >> autom4te: 'include' => 1, >> autom4te: '_AM_SUBST_NOTMAKE' => 1, >> autom4te: 'AM_PROG_CXX_C_O' => 1, >> autom4te: 'AM_PROG_F77_C_O' => 1, >> autom4te: 'AM_PROG_MKDIR_P' => 1, >> autom4te: '_AM_COND_ELSE' => 1, >> autom4te: 'AC_CONFIG_MACRO_DIR_TRACE' => 1, >> autom4te: 'LT_CONFIG_LTDL_DIR' => 1, >> autom4te: 'AC_LIBSOURCE' => 1, >> autom4te: 'AM_GNU_GETTEXT' => 1, >> autom4te: 'AM_CONDITIONAL' => 1, >> autom4te: 'AC_CONFIG_HEADERS' => 1, >> autom4te: 'LT_SUPPORTED_TAG' => 1, >> autom4te: 'AC_SUBST' => 1, >> autom4te: 'AM_PROG_CC_C_O' => 1, >> autom4te: 'AC_DEFINE_TRACE_LITERAL' => 1, >> autom4te: 'm4_sinclude' => 1, >> autom4te: 'AU_DEFINE' => 1, >> autom4te: 'AM_NLS' => 1, >> autom4te: 'AM_PATH_GUILE' => 1, >> autom4te: 'AC_CONFIG_AUX_DIR' => 1, >> autom4te: 'm4_include' => 1, >> autom4te: 'IT_PROG_INTLTOOL' => 1, >> autom4te: '_AM_COND_IF' => 1, >> autom4te: 'AC_REQUIRE_AUX_FILE' => 1, >> autom4te: 'AC_INIT' => 1, >> autom4te: '_LT_AC_TAGCONFIG' => 1, >> autom4te: 'AC_CONFIG_SUBDIRS' => 1, >> autom4te: 'sinclude' => 1, >> autom4te: '_m4_warn' => 1, >> autom4te: 'AM_PROG_LIBTOOL' => 1 >> autom4te: } >> autom4te: ], 'Autom4te::Request' ); >> autom4te: formatting traces for '/tmp/am4tkPPwdb/warnings': _m4_warn >> autom4te: reading /tmp/am4tkPPwdb/warnings >> autom4te: formatting traces for '-': AU_DEFINE >> autoupdate: running: /tools_x86_64/bin/m4 --include=/tmp/au0JiQkO --include=/usr/share/autoconf /tmp/au0JiQkO/input.m4 > /tmp/au0JiQkO/updated >> configure.in:121: warning: The preprocessor macro `STDC_HEADERS' is obsolete. >> Except in unusual embedded environments, you can safely include all >> ISO C90 headers unconditionally. >> configure.in:500: warning: Update your code to rely only on HAVE_SYS_TIME_H, >> then remove this warning and the obsolete code below it. >> All current systems provide time.h; it need not be checked for. >> Not all systems provide sys/time.h, but those that do, all allow >> you to include it and time.h simultaneously. >> autoupdate: 'configure.in' is updated >> cd /usr/src/collectd-4.10.9 && autoreconf -vfi >> autoreconf: export WARNINGS= >> autoreconf: warning: autoconf input should be named 'configure.ac', not 'configure.in' >> autoreconf: Entering directory '.' >> autoreconf: configure.in: not using Gettext >> autoreconf: running: aclocal --force -I libltdl/m4 >> aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in' >> autoreconf: configure.in: tracing >> autoreconf: configure.in: adding subdirectory libltdl to autoreconf >> autoreconf: Entering directory 'libltdl' >> autoreconf: configure.ac: not using Gettext >> autoreconf: running: aclocal --force -I m4 >> autoreconf: configure.ac: tracing >> autoreconf: running: libtoolize --copy --force --ltdl >> libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'config'. >> libtoolize: copying file 'config/compile' >> libtoolize: copying file 'config/config.guess' >> libtoolize: copying file 'config/config.sub' >> libtoolize: copying file 'config/depcomp' >> libtoolize: copying file 'config/install-sh' >> libtoolize: copying file 'config/missing' >> libtoolize: copying file 'config/ltmain.sh' >> libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'. >> libtoolize: copying file 'm4/libtool.m4' >> libtoolize: copying file 'm4/ltargz.m4' >> libtoolize: You should add the contents of 'm4/ltargz.m4' to 'aclocal.m4'. >> libtoolize: copying file 'm4/ltdl.m4' >> libtoolize: copying file 'm4/ltoptions.m4' >> libtoolize: copying file 'm4/ltsugar.m4' >> libtoolize: copying file 'm4/ltversion.m4' >> libtoolize: copying file 'm4/lt~obsolete.m4' >> libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, '.'. >> libtoolize: copying file './COPYING.LIB' >> libtoolize: creating file './Makefile.am' >> libtoolize: copying file './README' >> libtoolize: creating file './configure.ac' >> libtoolize: creating file './aclocal.m4' >> libtoolize: creating file './Makefile.in' >> libtoolize: copying file './config-h.in' >> libtoolize: creating file './configure' >> libtoolize: copying file './libltdl/lt__alloc.h' >> libtoolize: copying file './libltdl/lt__argz_.h' >> libtoolize: copying file './libltdl/lt__dirent.h' >> libtoolize: copying file './libltdl/lt__glibc.h' >> libtoolize: copying file './libltdl/lt__private.h' >> libtoolize: copying file './libltdl/lt__strl.h' >> libtoolize: copying file './libltdl/lt_dlloader.h' >> libtoolize: copying file './libltdl/lt_error.h' >> libtoolize: copying file './libltdl/lt_system.h' >> libtoolize: copying file './libltdl/slist.h' >> libtoolize: copying file './loaders/dld_link.c' >> libtoolize: copying file './loaders/dlopen.c' >> libtoolize: copying file './loaders/dyld.c' >> libtoolize: copying file './loaders/load_add_on.c' >> libtoolize: copying file './loaders/loadlibrary.c' >> libtoolize: copying file './loaders/preopen.c' >> libtoolize: copying file './loaders/shl_load.c' >> libtoolize: copying file './lt__alloc.c' >> libtoolize: copying file './lt__argz.c' >> libtoolize: copying file './lt__dirent.c' >> libtoolize: copying file './lt__strl.c' >> libtoolize: copying file './lt_dlloader.c' >> libtoolize: copying file './lt_error.c' >> libtoolize: copying file './ltdl.c' >> libtoolize: copying file './ltdl.h' >> libtoolize: copying file './slist.c' >> libtoolize: Remember to add 'LTDL_INIT' to configure.ac. >> autoreconf: configure.ac: not using Intltool >> autoreconf: configure.ac: not using Gtkdoc >> autoreconf: running: aclocal --force -I m4 >> autoreconf: running: /usr/bin/autoconf --force >> autoreconf: running: /usr/bin/autoheader --force >> autoreconf: running: automake --add-missing --copy --force-missing >> autoreconf: 'config/config.sub' is updated >> autoreconf: 'config/config.guess' is updated >> autoreconf: Leaving directory 'libltdl' >> autoreconf: running: libtoolize --copy --force --ltdl --ltdl >> libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'libltdl/config'. >> libtoolize: copying file 'libltdl/config/compile' >> libtoolize: copying file 'libltdl/config/config.guess' >> libtoolize: copying file 'libltdl/config/config.sub' >> libtoolize: copying file 'libltdl/config/depcomp' >> libtoolize: copying file 'libltdl/config/install-sh' >> libtoolize: copying file 'libltdl/config/missing' >> libtoolize: copying file 'libltdl/config/ltmain.sh' >> libtoolize: putting macros in 'libltdl/m4'. >> libtoolize: copying file 'libltdl/m4/libtool.m4' >> libtoolize: copying file 'libltdl/m4/ltargz.m4' >> libtoolize: You should add the contents of 'libltdl/m4/ltargz.m4' to 'aclocal.m4'. >> libtoolize: copying file 'libltdl/m4/ltdl.m4' >> libtoolize: copying file 'libltdl/m4/ltoptions.m4' >> libtoolize: copying file 'libltdl/m4/ltsugar.m4' >> libtoolize: copying file 'libltdl/m4/ltversion.m4' >> libtoolize: copying file 'libltdl/m4/lt~obsolete.m4' >> libtoolize: putting libltdl files in 'libltdl'. >> libtoolize: copying file 'libltdl/COPYING.LIB' >> libtoolize: creating file 'libltdl/Makefile.am' >> libtoolize: copying file 'libltdl/README' >> libtoolize: creating file 'libltdl/configure.ac' >> libtoolize: creating file 'libltdl/aclocal.m4' >> libtoolize: creating file 'libltdl/Makefile.in' >> libtoolize: copying file 'libltdl/config-h.in' >> libtoolize: creating file 'libltdl/configure' >> libtoolize: copying file 'libltdl/libltdl/lt__alloc.h' >> libtoolize: copying file 'libltdl/libltdl/lt__argz_.h' >> libtoolize: copying file 'libltdl/libltdl/lt__dirent.h' >> libtoolize: copying file 'libltdl/libltdl/lt__glibc.h' >> libtoolize: copying file 'libltdl/libltdl/lt__private.h' >> libtoolize: copying file 'libltdl/libltdl/lt__strl.h' >> libtoolize: copying file 'libltdl/libltdl/lt_dlloader.h' >> libtoolize: copying file 'libltdl/libltdl/lt_error.h' >> libtoolize: copying file 'libltdl/libltdl/lt_system.h' >> libtoolize: copying file 'libltdl/libltdl/slist.h' >> libtoolize: copying file 'libltdl/loaders/dld_link.c' >> libtoolize: copying file 'libltdl/loaders/dlopen.c' >> libtoolize: copying file 'libltdl/loaders/dyld.c' >> libtoolize: copying file 'libltdl/loaders/load_add_on.c' >> libtoolize: copying file 'libltdl/loaders/loadlibrary.c' >> libtoolize: copying file 'libltdl/loaders/preopen.c' >> libtoolize: copying file 'libltdl/loaders/shl_load.c' >> libtoolize: copying file 'libltdl/lt__alloc.c' >> libtoolize: copying file 'libltdl/lt__argz.c' >> libtoolize: copying file 'libltdl/lt__dirent.c' >> libtoolize: copying file 'libltdl/lt__strl.c' >> libtoolize: copying file 'libltdl/lt_dlloader.c' >> libtoolize: copying file 'libltdl/lt_error.c' >> libtoolize: copying file 'libltdl/ltdl.c' >> libtoolize: copying file 'libltdl/ltdl.h' >> libtoolize: copying file 'libltdl/slist.c' >> libtoolize: Remember to add 'LTDL_INIT' to configure.in. >> libtoolize: Remember to add 'LT_CONFIG_LTDL_DIR([libltdl])' to 'configure.in'. >> libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([libltdl/m4])' to configure.in, >> libtoolize: and rerunning libtoolize and aclocal. >> autoreconf: configure.in: not using Intltool >> autoreconf: configure.in: not using Gtkdoc >> autoreconf: running: aclocal --force -I libltdl/m4 >> aclocal: warning: autoconf input should be named 'configure.ac', not 'configure.in' >> autoreconf: running: /usr/bin/autoconf --force >> configure.in:51: warning: AC_PROG_LEX without either yywrap or noyywrap is obsolete >> ./lib/autoconf/programs.m4:716: _AC_PROG_LEX is expanded from... >> ./lib/autoconf/programs.m4:709: AC_PROG_LEX is expanded from... >> configure.in:51: the top level >> configure.in:125: warning: The preprocessor macro `STDC_HEADERS' is obsolete. >> configure.in:125: Except in unusual embedded environments, you can safely include all >> configure.in:125: ISO C90 headers unconditionally. >> configure.in:512: warning: Update your code to rely only on HAVE_SYS_TIME_H, >> configure.in:512: then remove this warning and the obsolete code below it. >> configure.in:512: All current systems provide time.h; it need not be checked for. >> configure.in:512: Not all systems provide sys/time.h, but those that do, all allow >> configure.in:512: you to include it and time.h simultaneously. >> autoreconf: running: /usr/bin/autoheader --force >> autoheader: warning: autoconf input should be named 'configure.ac', not 'configure.in' >> autoreconf: running: automake --add-missing --copy --force-missing >> automake: warning: autoconf input should be named 'configure.ac', not 'configure.in' >> Makefile.am:5: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') >> automake: warning: autoconf input should be named 'configure.ac', not 'configure.in' >> autoreconf: 'libltdl/config/config.sub' is updated >> autoreconf: 'libltdl/config/config.guess' is updated >> autoreconf: Leaving directory '.' >> cd /usr/src/collectd-4.10.9/libltdl && autoreconf -vfi >> autoreconf: export WARNINGS= >> autoreconf: Entering directory '.' >> autoreconf: configure.ac: not using Gettext >> autoreconf: running: aclocal --force -I m4 >> autoreconf: configure.ac: tracing >> autoreconf: running: libtoolize --copy --force --ltdl >> libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'config'. >> libtoolize: copying file 'config/compile' >> libtoolize: copying file 'config/config.guess' >> libtoolize: copying file 'config/config.sub' >> libtoolize: copying file 'config/depcomp' >> libtoolize: copying file 'config/install-sh' >> libtoolize: copying file 'config/missing' >> libtoolize: copying file 'config/ltmain.sh' >> libtoolize: putting macros in 'm4'. >> libtoolize: copying file 'm4/libtool.m4' >> libtoolize: copying file 'm4/ltargz.m4' >> libtoolize: copying file 'm4/ltdl.m4' >> libtoolize: copying file 'm4/ltoptions.m4' >> libtoolize: copying file 'm4/ltsugar.m4' >> libtoolize: copying file 'm4/ltversion.m4' >> libtoolize: copying file 'm4/lt~obsolete.m4' >> libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, '.'. >> libtoolize: copying file './COPYING.LIB' >> libtoolize: creating file './Makefile.am' >> libtoolize: copying file './README' >> libtoolize: creating file './configure.ac' >> libtoolize: creating file './aclocal.m4' >> libtoolize: creating file './Makefile.in' >> libtoolize: copying file './config-h.in' >> libtoolize: creating file './configure' >> libtoolize: copying file './libltdl/lt__alloc.h' >> libtoolize: copying file './libltdl/lt__argz_.h' >> libtoolize: copying file './libltdl/lt__dirent.h' >> libtoolize: copying file './libltdl/lt__glibc.h' >> libtoolize: copying file './libltdl/lt__private.h' >> libtoolize: copying file './libltdl/lt__strl.h' >> libtoolize: copying file './libltdl/lt_dlloader.h' >> libtoolize: copying file './libltdl/lt_error.h' >> libtoolize: copying file './libltdl/lt_system.h' >> libtoolize: copying file './libltdl/slist.h' >> libtoolize: copying file './loaders/dld_link.c' >> libtoolize: copying file './loaders/dlopen.c' >> libtoolize: copying file './loaders/dyld.c' >> libtoolize: copying file './loaders/load_add_on.c' >> libtoolize: copying file './loaders/loadlibrary.c' >> libtoolize: copying file './loaders/preopen.c' >> libtoolize: copying file './loaders/shl_load.c' >> libtoolize: copying file './lt__alloc.c' >> libtoolize: copying file './lt__argz.c' >> libtoolize: copying file './lt__dirent.c' >> libtoolize: copying file './lt__strl.c' >> libtoolize: copying file './lt_dlloader.c' >> libtoolize: copying file './lt_error.c' >> libtoolize: copying file './ltdl.c' >> libtoolize: copying file './ltdl.h' >> libtoolize: copying file './slist.c' >> libtoolize: Remember to add 'LTDL_INIT' to configure.ac. >> libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac, >> libtoolize: and rerunning libtoolize and aclocal. >> autoreconf: configure.ac: not using Intltool >> autoreconf: configure.ac: not using Gtkdoc >> autoreconf: running: aclocal --force -I m4 >> autoreconf: running: /usr/bin/autoconf --force >> autoreconf: running: /usr/bin/autoheader --force >> autoreconf: running: automake --add-missing --copy --force-missing >> autoreconf: 'config/config.sub' is updated >> autoreconf: 'config/config.guess' is updated >> autoreconf: Leaving directory '.' >> cd /usr/src/collectd-4.10.9 && ./configure --prefix=/usr --localstatedir=/var \ >> --disable-{apple_sensors,csv,ipvs,mbmon,memcached,mysql} \ >> --disable-{netlink,nginx,nut,perl,serial,snmp,tape,vserver,xmms} \ >> --disable-{perl,serial,snmp,tape,vserver,xmms} \ >> --enable-{apcups,battery,cpu{,freq},df,disk,dns,email,entropy,exec,hddtemp} \ >> --enable-{interface,iptables,irq,load,logfile,memory,multimeter} \ >> --enable-{network,nfs,ntpd,ping,processes,rrdtool,sensors,swap,syslog} \ >> --enable-{tcpconns,unixsock,users,wireless} \ >> --with-librrd=/usr/share/rrdtool-1.2.30 >> checking build system type... x86_64-pc-linux-gnu >> checking host system type... x86_64-pc-linux-gnu >> checking how to print strings... printf >> checking for gcc... gcc >> checking whether the C compiler works... yes >> checking for C compiler default output file name... a.out >> checking for suffix of executables... >> checking whether we are cross compiling... no >> checking for suffix of object files... o >> checking whether the compiler supports GNU C... yes >> checking whether gcc accepts -g... yes >> checking for gcc option to enable C11 features... none needed >> checking whether gcc understands -c and -o together... yes >> checking for a sed that does not truncate output... /bin/sed >> checking for grep that handles long lines and -e... /bin/grep >> checking for egrep... /bin/grep -E >> checking for fgrep... /bin/grep -F >> checking for ld used by gcc... /usr/bin/ld >> checking if the linker (/usr/bin/ld) is GNU ld... yes >> checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B >> checking the name lister (/usr/bin/nm -B) interface... BSD nm >> checking whether ln -s works... yes >> checking the maximum length of command line arguments... 1572864 >> checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop >> checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop >> checking for /usr/bin/ld option to reload object files... -r >> checking for objdump... objdump >> checking how to recognize dependent libraries... pass_all >> checking for dlltool... no >> checking how to associate runtime and link libraries... printf %s\n >> checking for ar... ar >> checking for archiver @FILE support... @ >> checking for strip... strip >> checking for ranlib... ranlib >> checking for gawk... gawk >> checking command to parse /usr/bin/nm -B output from gcc object... ok >> checking for sysroot... no >> checking for a working dd... /bin/dd >> checking how to truncate binary pipes... /bin/dd bs=4096 count=1 >> checking for mt... no >> checking if : is a manifest tool... no >> checking for stdio.h... yes >> checking for stdlib.h... yes >> checking for string.h... yes >> checking for inttypes.h... yes >> checking for stdint.h... yes >> checking for strings.h... yes >> checking for sys/stat.h... yes >> checking for sys/types.h... yes >> checking for unistd.h... yes >> checking for sys/time.h... yes >> checking for dlfcn.h... yes >> checking for objdir... .libs >> checking if gcc supports -fno-rtti -fno-exceptions... no >> checking for gcc option to produce PIC... -fPIC -DPIC >> checking if gcc PIC flag -fPIC -DPIC works... yes >> checking if gcc static flag -static works... yes >> checking if gcc supports -c -o file.o... yes >> checking if gcc supports -c -o file.o... (cached) yes >> checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes >> checking whether -lc should be explicitly linked in... no >> checking dynamic linker characteristics... GNU/Linux ld.so >> checking how to hardcode library paths into programs... immediate >> checking for shl_load... no >> checking for shl_load in -ldld... no >> checking for dlopen... no >> checking for dlopen in -ldl... yes >> checking whether a program can dlopen itself... yes >> checking whether a statically linked program can dlopen itself... no >> checking whether stripping libraries is possible... yes >> checking if libtool supports shared libraries... yes >> checking whether to build shared libraries... yes >> checking whether to build static libraries... yes >> checking for gcc options needed to detect all undeclared functions... none needed >> checking what extension is used for runtime loadable modules... .so >> checking what variable specifies run-time module search path... LD_LIBRARY_PATH >> checking for the default library search path... /lib /usr/lib /usr/lib/sasl2 >> checking for library containing dlopen... -ldl >> checking for dlerror... yes >> checking for shl_load... (cached) no >> checking for shl_load in -ldld... (cached) no >> checking for dld_link in -ldld... no >> checking for _ prefix in compiled symbols... no >> checking whether deplibs are loaded by dlopen... yes >> checking for argz.h... yes >> checking for error_t... yes >> checking for argz_add... yes >> checking for argz_append... yes >> checking for argz_count... yes >> checking for argz_create_sep... yes >> checking for argz_insert... yes >> checking for argz_next... yes >> checking for argz_stringify... yes >> checking if argz actually works... yes >> checking whether libtool supports -dlopen/-dlpreopen... yes >> checking for ltdl.h... yes >> checking whether lt_dlinterface_register is declared... yes >> checking for lt_dladvise_preload in -lltdl... yes >> checking where to find libltdl headers... >> checking where to find libltdl library... -lltdl >> checking for unistd.h... (cached) yes >> checking for dl.h... no >> checking for sys/dl.h... no >> checking for dld.h... no >> checking for mach-o/dyld.h... no >> checking for dirent.h... yes >> checking for closedir... yes >> checking for opendir... yes >> checking for readdir... yes >> checking for strlcat... no >> checking for strlcpy... no >> checking for a BSD-compatible install... /usr/bin/install -c >> checking whether build environment is sane... yes >> checking for a race-free mkdir -p... /bin/mkdir -p >> checking whether make sets $(MAKE)... yes >> checking whether make supports the include directive... yes (GNU style) >> checking whether make supports nested variables... yes >> checking dependency style of gcc... gcc3 >> checking for special C compiler options needed for large files... no >> checking for _FILE_OFFSET_BITS value needed for large files... no >> checking for gcc... (cached) gcc >> checking whether the compiler supports GNU C... (cached) yes >> checking whether gcc accepts -g... (cached) yes >> checking for gcc option to enable C11 features... (cached) none needed >> checking whether gcc understands -c and -o together... (cached) yes >> checking how to run the C preprocessor... gcc -E >> checking whether ln -s works... yes >> checking whether make sets $(MAKE)... (cached) yes >> checking for flex... flex >> checking for lex output file root... lex.yy >> checking for lex library... none needed >> checking for library containing yywrap... -ll >> checking whether yytext is a pointer... yes >> checking for bison... bison -y >> checking for pkg-config... /usr/bin/pkg-config >> checking pkg-config is at least version 0.9.0... yes >> checking for protoc-c... no >> checking for kernel type (linux-gnu)... Linux >> checking for egrep... (cached) /bin/grep -E >> checking for sys/wait.h that is POSIX.1 compatible... yes >> checking for dirent.h that defines DIR... yes >> checking for library containing opendir... none required >> checking for _Bool... yes >> checking for stdbool.h that conforms to C99... yes >> checking for stdio.h... (cached) yes >> checking for errno.h... yes >> checking for math.h... yes >> checking for stdarg.h... yes >> checking for syslog.h... yes >> checking for fcntl.h... yes >> checking for signal.h... yes >> checking for assert.h... yes >> checking for sys/types.h... (cached) yes >> checking for sys/socket.h... yes >> checking for sys/select.h... yes >> checking for poll.h... yes >> checking for netdb.h... yes >> checking for arpa/inet.h... yes >> checking for sys/resource.h... yes >> checking for sys/param.h... yes >> checking for kstat.h... no >> checking for regex.h... yes >> checking for sys/ioctl.h... yes >> checking for endian.h... yes >> checking for sys/isa_defs.h... no >> checking for netinet/in_systm.h... yes >> checking for netinet/in.h... yes >> checking for netinet/ip.h... yes >> checking for netinet/ip_icmp.h... yes >> checking for netinet/ip_var.h... no >> checking for netinet/ip6.h... yes >> checking for netinet/icmp6.h... yes >> checking for netinet/tcp.h... yes >> checking for netinet/udp.h... yes >> checking for sys/dkstat.h... no >> checking for sys/sysctl.h... no >> checking for sysctl kern.cp_times... no >> checking for linux/major.h... yes >> checking for libgen.h... yes >> checking for IOKit/ps/IOPowerSources.h... no >> checking for linux/wireless.h... yes >> checking for sys/swap.h... yes >> checking for vm/anon.h... no >> checking for sys/loadavg.h... no >> checking for linux/config.h... no >> checking for utmp.h... yes >> checking for utmpx.h... yes >> checking for ifaddrs.h... yes >> checking for net/if.h... yes >> checking for linux/if.h... yes >> checking for linux/netdevice.h... yes >> checking for linux/ip_vs.h... yes >> checking for net/ip_vs.h... no >> checking for ip_vs.h... no >> checking for sys/ucred.h... no >> checking for sys/mount.h... yes >> checking for linux/un.h... yes >> checking for pwd.h... yes >> checking for grp.h... yes >> checking for sys/un.h... yes >> checking for ctype.h... yes >> checking for limits.h... yes >> checking for xfs/xqm.h... yes >> checking for fs_info.h... no >> checking for fshelp.h... no >> checking for paths.h... yes >> checking for mntent.h... yes >> checking for mnttab.h... no >> checking for sys/fstyp.h... no >> checking for sys/fs_types.h... no >> checking for sys/mntent.h... no >> checking for sys/mnttab.h... no >> checking for sys/statfs.h... yes >> checking for sys/statvfs.h... yes >> checking for sys/vfs.h... yes >> checking for sys/vfstab.h... no >> checking for kvm.h... no >> checking for wordexp.h... yes >> checking for arpa/nameser.h... yes >> checking for arpa/nameser_compat.h... yes >> checking for net/if_arp.h... yes >> checking for net/ppp_defs.h... yes >> checking for net/if_ppp.h... yes >> checking for netinet/if_ether.h... yes >> checking for termios.h... yes >> checking for an ANSI C-conforming const... yes >> checking for pid_t... yes >> checking for size_t... yes >> checking for uid_t in sys/types.h... yes >> checking whether gcc needs -traditional... no >> checking for gettimeofday... yes >> checking for select... yes >> checking for strdup... yes >> checking for strtol... yes >> checking for getaddrinfo... yes >> checking for getnameinfo... yes >> checking for strchr... yes >> checking for memcpy... yes >> checking for strstr... yes >> checking for strcmp... yes >> checking for strncmp... yes >> checking for strncpy... yes >> checking for strlen... yes >> checking for strncasecmp... yes >> checking for strcasecmp... yes >> checking for openlog... yes >> checking for closelog... yes >> checking for sysconf... yes >> checking for setenv... yes >> checking for if_indextoname... yes >> checking whether strerror_r is declared... yes >> checking whether strerror_r returns char *... no >> checking for strtok_r... yes >> checking for getpwnam_r... yes >> checking for getgrnam_r... yes >> checking for setgroups... yes >> checking for regcomp... yes >> checking for regerror... yes >> checking for regexec... yes >> checking for regfree... yes >> checking for socket... yes >> checking for nanosleep... yes >> checking for sysctl... no >> checking for sysctlbyname... no >> checking for host_statistics... no >> checking for processor_info... no >> checking for thread_info... no >> checking for statfs... yes >> checking for statvfs... yes >> checking for getifaddrs... yes >> checking for syslog... yes >> checking for getutent... yes >> checking for getutxent... yes >> checking for swapctl... no >> checking for getloadavg... yes >> checking whether NAN is defined by default... yes >> checking if doubles are stored in x86 representation... ./configure: line 15649: ac_fn_c_try_run: command not found >> no >> checking if endianflip converts to x86 representation... ./configure: line 15733: ac_fn_c_try_run: command not found >> no >> checking if intswap converts to x86 representation... ./configure: line 15811: ac_fn_c_try_run: command not found >> no >> configure: error: Didn't find out how doubles are stored in memory. Sorry. >> make: *** [collectd:112: /usr/src/log/collectd-4.10.9] Error 1 > -- Sent from my laptop