From mboxrd@z Thu Jan  1 00:00:00 1970
From: Adolf Belka <adolf.belka@ipfire.org>
To: development@lists.ipfire.org
Subject: Re: Getting everyone started with Pakfire
Date: Tue, 05 Sep 2023 21:02:00 +0200
Message-ID: <ef0c6a3f-173a-495e-a42e-af2f2277cfb6@ipfire.org>
In-Reply-To: <1d1e1e83-bdfa-4bc8-afc2-ae61f38aa7b0@ipfire.org>
MIME-Version: 1.0
Content-Type: multipart/mixed; boundary="===============5301412084159751720=="
List-Id: <development.lists.ipfire.org>

--===============5301412084159751720==
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: quoted-printable

Hi Michael,
I entered exit at the pakfire-jail /> prompt in the output posted in the=20
below email and the following was then printed.

pakfire-jail /> exit
logout
Bye bye.
_pakfire.CommandExecutionError: 2

The above exception was the direct cause of the following exception:

SystemError: <function Logger.log at 0x7feff2e71da0> returned a result=20
with an exception set
Traceback (most recent call last):
 =C2=A0 File "/usr/bin/pakfire-builder", line 437, in <module>
 =C2=A0=C2=A0=C2=A0 c()
 =C2=A0 File "/usr/bin/pakfire-builder", line 212, in __call__
 =C2=A0=C2=A0=C2=A0 ret =3D args.func(args)
 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 ^^^^^^^^^^^^^^^
 =C2=A0 File "/usr/bin/pakfire-builder", line 248, in _build
 =C2=A0=C2=A0=C2=A0 p.build(
SystemError: <method 'build' of '_pakfire.Pakfire' objects> returned=20
NULL without setting an exception

Regards,
Adolf.


On 05/09/2023 20:58, Adolf Belka wrote:
> Hi Michael,
>
> On 05/09/2023 18:25, Michael Tremer wrote:
>> Hello,
>>
>> So I installed Archlinux (using the scenic route) and managed to fix=20
>> both problems that you encountered:
>>
>> * The first one was the SQLite error message which was not really a=20
>> problem, because we were trying to detect the database schema version=20
>> here, but since there was no database in the first place we could not=20
>> read from the table.
>>
>> This did not get logged before, and therefore I assume that this is a=20
>> change in sqlite and as Archlinux simply is running on a later=20
>> release, we ran into this. It is very likely not an=20
>> Archlinux-specific thing.
>>
>> * The other thing isn=E2=80=99t Archlinux-specific either: The local packa=
ge=20
>> repository did not exist, yet where Pakfire stores packages that have=20
>> been built locally. I must have recently introduced this problem when=20
>> rewriting the FTS stuff.
>>
>> So, please pull and run this all again and let me know what breaks=20
>> next :)
> This time pakfire-builder actually ran but there were a few error=20
> messages on the way but these look to be more about the building now=20
> rather than getting pakfire-builder to work.
> The following was what was output
>
> sudo pakfire-builder build beep/beep.nm
> =C2=A0Package Database: testing 100% =C2=A0 | 2.1M=C2=A0 00:00
> Could not retrieve uname for 1000: No such file or directory
> Could not retrieve gname for 1000: No such file or directory
> Could not retrieve uname for 1000: No such file or directory
> Could not retrieve gname for 1000: No such file or directory
> Could not retrieve uname for 1000: No such file or directory
> Could not retrieve gname for 1000: No such file or directory
> =C2=A0beep-1.3.tar.gz 100% =C2=A0 | 19k=C2=A0=C2=A0 00:00
> =C2=A0beep-1.3-2.ipfire3.src =C2=A0=C2=A0=C2=A0=C2=A0 20k=C2=A0=C2=A0 100%
> Building beep-1.3-2.ipfire3.src...
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=20
>
> =C2=A0glibc-2.37-2.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0ncurses-base-6.3-3.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libstdc++-12.3.0-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libgomp-12.3.0-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libgcc-12.3.0-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0kernel-headers-6.4.3-3.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0ca-certificates-2022.12-2.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libdevmapper-2.03.16-2.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0tzdata-2022g-1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libstdc++-devel-12.3.0-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libunwind-1.6.2-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0npth-1.6-2.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libtasn1-4.19.0-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0cyrus-sasl-libs-2.1.28-4.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0popt-1.19-1.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0nghttp2-1.51.0-1.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0lzo-2.10-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0pixman-0.42.2-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libgpg-error-1.46-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0sqlite-libs-3.40.0-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libffi-3.4.4-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0pcre2-utf32-10.40-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0pcre2-utf16-10.40-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0zstd-libs-1.5.2-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libseccomp-2.5.4-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0xz-libs-5.2.8-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0diffutils-3.8-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0lzip-1.23-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0make-4.4-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0which-2.21-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libunistring-1.1-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0bzip2-libs-1.0.8-2.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0ncurses-libs-6.3-3.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libattr-2.5.1-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libksba-1.6.2-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0ccache-4.7.4-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0xz-5.2.8-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0bzip2-1.0.8-2.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0ncurses-6.3-3.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0patch-2.7.6-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libacl-2.3.1-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0tar-1.34-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libnl3-3.2.25-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0json-c-0.16-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0gdbm-1.23-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0expat-2.5.0-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libcap-ng-0.8.3-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0glibc-devel-2.37-2.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libxcrypt-4.4.33-2.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0zlib-1.2.13-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-libs-5.36.0-2.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0gmp-6.2.1-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0sed-4.9-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0hostname-3.23-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0gzip-1.12-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libassuan-2.5.5-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libgcrypt-1.10.1-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0readline-8.2-2.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0python3-libs-3.11.0-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0pam-1.5.2-1.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0openssl-libs-3.0.8-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0freetype-2.12.1-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Exporter-5.77-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0mpfr-4.1.0-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libcap-2.66-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0shadow-utils-4.13-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0kmod-libs-30-2.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Scalar-List-Utils-1.62-2.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0gawk-5.2.1-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0htop-3.2.1-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0coreutils-9.1-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-File-Basename-2.85-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Path-Tools-3.84-2.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-5.36.0-2.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Carp-1.33.01-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-vars-1.05-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-constant-1.33-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Fcntl-1.15-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-POSIX-2.03-2.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Symbol-1.09-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Text-Tabs+Wrap-2021.0814-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Pod-Escapes-1.07-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-if-0.61.000-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Term-Cap-2.27-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Term-ANSIColor-5.01-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-subs-1.04-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-overloading-0.02-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-mro-1.26-2.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Text-ParseWords-3.31-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Storable-3.26-2.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-parent-0.238-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-MIME-Base64-3.16-2.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-overload-1.35-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Getopt-Long-2.52-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Getopt-Std-1.13-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Encode-3.17-2.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Class-Struct-0.66-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-File-stat-1.12-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-File-Path-2.18-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Compress-Raw-Zlib-2.105-2.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-File-Temp-0.231.100-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Compress-Raw-Bzip2-2.103-2.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-IO-1.50-2.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-IO-Compress-2.106-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-SelectSaver-1.02-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Socket-2.033-2.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Pod-Simple-3.43-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-Pod-Usage-2.01-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-podlators-4.14-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0perl-File-Find-1.40-2.1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libsolv-0.7.22-2.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libpng-1.6.39-2.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0binutils-libs-2.40-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0file-5.43-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libxml2-2.10.3-3.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0nettle-3.8.1-2.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0pcre-8.45-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0pcre2-10.40-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libssh2-1.9.0-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0openldap-libs-2.6.4-3.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libudev-253-5.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0binutils-2.40-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0less-608-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libcurl-7.86.0-2.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0elfutils-libs-0.188-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0pkg-config-0.29.2-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libuuid-devel-2.38.1-3.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libblkid-devel-2.38.1-3.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libmount-devel-2.38.1-3.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libarchive-3.6.1-2.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0grep-3.8-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0bash-5.2.9-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0glib2-2.74.2-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0fontconfig-2.13.1-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0python3-3.11.0-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0gobject-introspection-libs-1.74.0-3.ipfire3.x86_64 100%
> =C2=A0gmp-devel-6.2.1-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0cairo-1.17.6-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0python3-tornado-6.2.0-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0python3-setproctitle-1.3.1-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0python3-psutil-5.9.4-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0gobject-introspection-1.74.0-3.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0cairo-gobject-1.17.6-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libcom_err-devel-1.46.5-2.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libudev-devel-253-5.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libsmartcols-devel-2.38.1-3.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0hwdata-0.366-1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libfidsk-devel-2.38.1-3.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0systemd-libs-253-5.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0python3-cpuinfo-9.0.0-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0python3-cairo-1.23.0-2.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libdevmapper-devel-2.03.16-2.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0p11-kit-0.24.1-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0dbus-libs-1.15.2-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0systemd-basetools-253-5.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0util-linux-2.38.1-3.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0cryptsetup-luks-2.6.1-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0python3-dbus-1.3.2-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0dbus-common-1.15.2-1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0krb5-libs-1.20.1-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0python3-systemd-235-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0python3-gobject3-3.42.2-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0gnutls-3.7.8-2.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0python3-kerberos-1.3.1-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0gnupg2-2.3.8-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0gpgme-1.18.0-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0systemd-253-5.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> *** buffer overflow detected ***: terminated
> The child process terminated abnormally
> =C2=A0dbus-broker-32-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0setup-3.0-18.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> *** buffer overflow detected ***: terminated
> The child process terminated abnormally
> =C2=A0bash-completion-2.11-1.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0vim-8.0.1184-2.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0filesystem-002-4.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0libtool-2.4.7-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0gettext-0.21.1-2.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0gettext-libs-0.21.1-2.1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0findutils-4.9.0-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0pakfire-0.9.28-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0gcc-12.3.0-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0gcc-c++-12.3.0-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0cpp-12.3.0-1.ipfire3.x86_64 =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> =C2=A0ipfire-release-3.0-alpha2-7.ipfire3.noarch =C2=A0=C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> *** buffer overflow detected ***: terminated
> The child process terminated abnormally
> =C2=A0ipfire-release-build-3.0-alpha2-7.ipfire3.noarch =C2=A0=C2=A0=C2=A0=
=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 100%
> Could not retrieve gname for 22: No such file or directory
> Could not retrieve gname for 22: No such file or directory
> Could not retrieve gname for 22: No such file or directory
> Could not retrieve gname for 22: No such file or directory
> Could not retrieve gname for 22: No such file or directory
> Could not retrieve gname for 22: No such file or directory
> Could not retrieve gname for 190: No such file or directory
> Could not retrieve gname for 190: No such file or directory
> =C2=A0Storing Snapshot 310.5MB/s 931.4M 100%
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=20
>
> =C2=A0beep-1.3-2.ipfire3.src =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=
=A0=C2=A0=C2=A0=C2=A0 100%
> Running build stage 'prepare'
> [=C2=A0=C2=A0 01:02.0875] + rm -rf '/var/tmp/pakfire-buildroot.QcH0X9/*'
> [=C2=A0=C2=A0 01:02.0877] + mkdir -p /build/source
> [=C2=A0=C2=A0 01:02.0879] + cd /build/source
> [=C2=A0=C2=A0 01:02.0879] + for source in beep-1.3.tar.gz
> [=C2=A0=C2=A0 01:02.0879] + tar --no-same-owner --no-acls --no-xattrs -xaf =

> /usr/src/packages/beep-1.3-2.ipfire3.src/files/beep-1.3.tar.gz
> [=C2=A0=C2=A0 01:02.0882] + unset source
> [=C2=A0=C2=A0 01:02.0883] + '[' -d /build/source/beep-1.3 ']'
> [=C2=A0=C2=A0 01:02.0883] + cd /build/source/beep-1.3
> [=C2=A0=C2=A0 01:02.0883] + __patch=20
> --search-path=3D/usr/src/packages/beep-1.3-2.ipfire3.src/patches ''
> [=C2=A0=C2=A0 01:02.0883] + paths=3D()
> [=C2=A0=C2=A0 01:02.0883] + local paths
> [=C2=A0=C2=A0 01:02.0883] + local path
> [=C2=A0=C2=A0 01:02.0884] + patches=3D()
> [=C2=A0=C2=A0 01:02.0884] + local patches
> [=C2=A0=C2=A0 01:02.0884] + local patch
> [=C2=A0=C2=A0 01:02.0884] + '[' 2 -gt 0 ']'
> [=C2=A0=C2=A0 01:02.0884] + case "${1}" in
> [=C2=A0=C2=A0 01:02.0884] + paths+=3D("${1#--search-path=3D}")
> [=C2=A0=C2=A0 01:02.0884] + shift
> [=C2=A0=C2=A0 01:02.0885] + '[' 1 -gt 0 ']'
> [=C2=A0=C2=A0 01:02.0885] + case "${1}" in
> [=C2=A0=C2=A0 01:02.0885] + patches+=3D("${1}")
> [=C2=A0=C2=A0 01:02.0885] + shift
> [=C2=A0=C2=A0 01:02.0885] + '[' 0 -gt 0 ']'
> [=C2=A0=C2=A0 01:02.0885] + return 0
> [=C2=A0=C2=A0 01:02.0885] + mkdir -pv /build/source/beep-1.3/
> [=C2=A0=C2=A0 01:02.0886] + exit 0
> [=C2=A0=C2=A0 01:02.0886] ++ echo 'Bye bye.'
> [=C2=A0=C2=A0 01:02.0886] Bye bye.
> Running build stage 'build'
> [=C2=A0=C2=A0 01:02.0916] + '[' -d /build/source/beep-1.3/ ']'
> [=C2=A0=C2=A0 01:02.0917] + cd /build/source/beep-1.3/
> [=C2=A0=C2=A0 01:02.0917] + make 'FLAGS=3D-O2 -g -Wall -Werror=3Dformat-sec=
urity=20
> -Wp,-U_FORTIFY_SOURCE -Wp,-D_FORTIFY_SOURCE=3D3 -D_GLIBCXX_ASSERTIONS=20
> -fPIC -fstack-protector-all -funwind-tables=20
> -fasynchronous-unwind-tables -fstack-clash-protection=20
> -fdebug-prefix-map=3D/build/source=3D/usr/src/debug -pipe -m64=20
> -march=3Dx86-64-v2 -mtune=3Dgeneric -fcf-protection=3Dfull -flto=3Dauto=20
> -ffat-lto-objects -Wl,-O1 -Wl,--as-needed -Wl,-z,relro -Wl,-z,now' -j4
> [=C2=A0=C2=A0 01:02.0919] gcc -O2 -g -Wall -Werror=3Dformat-security=20
> -Wp,-U_FORTIFY_SOURCE -Wp,-D_FORTIFY_SOURCE=3D3 -D_GLIBCXX_ASSERTIONS=20
> -fPIC -fstack-protector-all -funwind-tables=20
> -fasynchronous-unwind-tables -fstack-clash-protection=20
> -fdebug-prefix-map=3D/build/source=3D/usr/src/debug -pipe -m64=20
> -march=3Dx86-64-v2 -mtune=3Dgeneric -fcf-protection=3Dfull -flto=3Dauto=20
> -ffat-lto-objects -Wl,-O1 -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -o=20
> beep beep.c
> [=C2=A0=C2=A0 01:02.0923] /usr/lib64/gcc/x86_64-ipfire-linux/12.3.0/cc1: er=
ror=20
> while loading shared libraries: libisl.so.23: cannot open shared=20
> object file: No such file or directory
> [=C2=A0=C2=A0 01:02.0926] make: *** [Makefile:14: beep] Error 1
> Build stage 'build' failed with status 2
> pakfire-jail />
>
> Regards,
> Adolf
>
>>
>> -Michael
>>
>>> On 4 Sep 2023, at 12:43, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>>>
>>> Hi Michael,
>>>
>>> On 04/09/2023 12:29, Michael Tremer wrote:
>>>> Hello Adolf,
>>>>> On 2 Sep 2023, at 12:54, Adolf Belka <adolf.belka(a)ipfire.org> wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> On 02/09/2023 13:33, Michael Tremer wrote:
>>>>>> Hello,
>>>>>> Is there an easy way to install Archlinux in a VM without running=20
>>>>>> through this process manually?
>>>>>> =C2=A0=C2=A0 https://wiki.archlinux.org/title/Installation_guide
>>>>> Unfortunately not that I am aware of, although it is not that=20
>>>>> complicated for just a command line based system.
>>>>> Arch Linux don't have an installer anymore.
>>>>>
>>>>> The only thing I can think of is that if you are able to use=20
>>>>> VirtualBox, I could create a VirtualBox text interface only vm=20
>>>>> which I could then export from my system as a file to send to you=20
>>>>> or place in my dropbox system for you to upload.
>>>>>
>>>>> Would that be of any use?
>>>> Probably, but I suppose we will both spend the same time then.
>>>> I will just do the process as described on that wiki page. I was=20
>>>> just surprised how manual it all is.
>>> I have found an Arch Linux wiki page about an installation helper.=20
>>> That might make it a bit easier. It is not graphical but text based=20
>>> but it takes you through and asks the various questions. Apparently=20
>>> the defaults are different than described in the normal installation=20
>>> guide.
>>>
>>> https://wiki.archlinux.org/title/Archinstall
>>>
>>> Regards,
>>>
>>> Adolf.
>>>> Best,
>>>> -Michael
>>>>>
>>>>> Regards,
>>>>> Adolf.
>>>>>> It might be quicker for me to reproduce the problem.
>>>>>> -Michael
>>>>>>> On 2 Sep 2023, at 12:11, Adolf Belka <adolf.belka(a)ipfire.org>=20
>>>>>>> wrote:
>>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> On 02/09/2023 13:02, Michael Tremer wrote:
>>>>>>>> Hello,
>>>>>>>>> On 2 Sep 2023, at 12:00, Adolf Belka <adolf.belka(a)ipfire.org>=20
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 02/09/2023 12:53, Michael Tremer wrote:
>>>>>>>>>> Hello Adolf,
>>>>>>>>>>> On 2 Sep 2023, at 11:49, Adolf Belka=20
>>>>>>>>>>> <adolf.belka(a)ipfire.org> wrote:
>>>>>>>>>>>
>>>>>>>>>>> Hi Michael,
>>>>>>>>>>>
>>>>>>>>>>> I went back to pakfire and looked through the config.log=20
>>>>>>>>>>> file from my build.
>>>>>>>>>>>
>>>>>>>>>>> =C2=A0From that I noticed the following defines
>>>>>>>>>>>
>>>>>>>>>>> #define PAKFIRE_CONFIG_DIR "/etc/pakfire"
>>>>>>>>>>> #define PAKFIRE_CACHE_DIR "/var/cache/pakfire"
>>>>>>>>>>> #define PAKFIRE_PRIVATE_DIR "/var/lib/pakfire"
>>>>>>>>>>> #define PAKFIRE_SCRIPTS_DIR "/lib/pakfire"
>>>>>>>>>>> #define PAKFIRE_TMP_DIR "/var/tmp"
>>>>>>>>>>>
>>>>>>>>>>> After running sudo make install then /var/lib/pakfire and=20
>>>>>>>>>>> /var/cache/pakfire are not present on the system.
>>>>>>>>>> That should be correct. Pakfire should create those=20
>>>>>>>>>> directories itself if it is running as root.
>>>>>>>>>> For unprivileged users, it will create a cache directory in=20
>>>>>>>>>> the user=E2=80=99s home, because we cannot write to /var/lib/=E2=
=80=A6, etc.
>>>>>>>>>>> I also read through the INSTALL file in the pakfire=20
>>>>>>>>>>> directory and it said the following were required.
>>>>>>>>>>>
>>>>>>>>>>> Requirements:
>>>>>>>>>>> =C2=A0 * Python 2.6 or greater (not Python 3.x)
>>>>>>>>>>> =C2=A0 * python-argsparse (included in Python 2.7)
>>>>>>>>>>> =C2=A0 * libcap
>>>>>>>>>>> =C2=A0 * libsolv
>>>>>>>>>>> =C2=A0 * xz
>>>>>>>>>>> =C2=A0 * beecrypt (requires libgomp)
>>>>>>>>>>> =C2=A0 * popt
>>>>>>>>>>> =C2=A0 * libelf
>>>>>>>>>>> =C2=A0 * elfutils
>>>>>>>>>> This is old and I will remove this as soon as possible :)
>>>>>>>>>>> I don't have beecrypt or libgomp installed and not available=20
>>>>>>>>>>> from Arch Linux except from their AUR which requires me to=20
>>>>>>>>>>> build them.
>>>>>>>>>>>
>>>>>>>>>>> Also the mention of not Python 3.x as that is all that is=20
>>>>>>>>>>> available on Arch Linux.
>>>>>>>>>>>
>>>>>>>>>>> Are the above requirements correct or out of date and should=20
>>>>>>>>>>> be ignored?
>>>>>>>>>> Please ignore. If configure went through without complaining,=20
>>>>>>>>>> you have everything you need.
>>>>>>>>>> What I find very interesting are those SQL errors. When=20
>>>>>>>>>> Pakfire starts, it is creating an internal SQLite database to=20
>>>>>>>>>> store package information and other things=E2=80=A6 And it looks l=
ike=20
>>>>>>>>>> the database is there, but the schema is not being created.=20
>>>>>>>>>> And even weirder is that Pakfire does not abort there=E2=80=A6
>>>>>>>>>> Which versions of libarchive and SQLite do you have?
>>>>>>>>> sqlite 3.43.0
>>>>>>>>> libarchive 3.7.1
>>>>>>>> I have libarchive 3.6.2 and sqlite 3.40.1, but I don=E2=80=99t think=
=20
>>>>>>>> there are any significant differences here.
>>>>>>>> Could you please pull again and check if the message about the=20
>>>>>>>> missing file is gone?
>>>>>>> Did the pull, then re-ran the whole build instruction set again.=20
>>>>>>> I didn't do a sudo make uninstall first.
>>>>>>>
>>>>>>> Result was exactly the same error message. Nothing changed.
>>>>>>>
>>>>>>> sudo pakfire-builder build beep/beep.nm
>>>>>>> Database Error: SQL logic error: no such table: settings in=20
>>>>>>> "SELECT val FROM settings WHERE key =3D ?"
>>>>>>> Database Error: SQL logic error: no such table: settings in=20
>>>>>>> "SELECT val FROM settings WHERE key =3D ?"
>>>>>>> Package Database: testing 100%=C2=A0=C2=A0 | 1.6M=C2=A0 00:00
>>>>>>> Could not read next file: /var/lib/pakfire/local/ipfire/3:=20
>>>>>>> Cannot stat
>>>>>>> OSError: [Errno 25] Inappropriate ioctl for device
>>>>>>>
>>>>>>> The above exception was the direct cause of the following=20
>>>>>>> exception:
>>>>>>>
>>>>>>> Traceback (most recent call last):
>>>>>>> =C2=A0 File "/usr/bin/pakfire-builder", line 437, in <module>
>>>>>>> =C2=A0=C2=A0=C2=A0 c()
>>>>>>> =C2=A0 File "/usr/bin/pakfire-builder", line 212, in __call__
>>>>>>> =C2=A0=C2=A0=C2=A0 ret =3D args.func(args)
>>>>>>> =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 ^^^^^^^^^^^^^^^
>>>>>>> =C2=A0 File "/usr/bin/pakfire-builder", line 233, in _build
>>>>>>> =C2=A0=C2=A0=C2=A0 p =3D self.pakfire(ns)
>>>>>>> =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 ^^^^^^^^^^^^^^^^
>>>>>>> =C2=A0 File "/usr/bin/pakfire-builder", line 194, in pakfire
>>>>>>> =C2=A0=C2=A0=C2=A0 p =3D pakfire.Pakfire(arch=3Dns.arch, conf=3Dc, lo=
gger=3Dlogger.log)
>>>>>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>>>>> SystemError: <class '_pakfire.Pakfire'> returned a result with=20
>>>>>>> an exception set
>>>>>>>
>>>>>>> Regards,
>>>>>>> Adolf.
>>>>>>>> -Michael
>>>>>>>>>
>>>>>>>>> Adolf.
>>>>>>>>>> -Michael
>>>>>>>>>>> Regards,
>>>>>>>>>>>
>>>>>>>>>>> Adolf.
>>>>>>>>>>>
>>>>>>>>>>> On 02/09/2023 12:26, Adolf Belka wrote:
>>>>>>>>>>>> Hi Michael,
>>>>>>>>>>>>
>>>>>>>>>>>> On 02/09/2023 11:29, Michael Tremer wrote:
>>>>>>>>>>>>> Hello Adolf,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Have you been running this as root? I am not sure how well=20
>>>>>>>>>>>>> this is all working as an unprivileged user at the moment.=20
>>>>>>>>>>>>> I think there might be a little bit of work ahead to make=20
>>>>>>>>>>>>> it work well.
>>>>>>>>>>>> Yes, I was using an unprivileged user. I always do that=20
>>>>>>>>>>>> unless the instructions say to use sudo or if the program=20
>>>>>>>>>>>> comes back and says it must be run with root privileges. Or=20
>>>>>>>>>>>> if I know that it has to be run with sudo like make install.
>>>>>>>>>>>>
>>>>>>>>>>>> So tried it again with sudo and the error message was=20
>>>>>>>>>>>> exactly the same.
>>>>>>>>>>>>
>>>>>>>>>>>> Tried
>>>>>>>>>>>> sudo pakfire-builder --debug build beep/beep.nm
>>>>>>>>>>>>
>>>>>>>>>>>> and the error message was exactly the same.
>>>>>>>>>>>>
>>>>>>>>>>>> Tried sudo -s to get a root prompt and then ran the=20
>>>>>>>>>>>> pakfire-builder command and exactly the same error message.
>>>>>>>>>>>>
>>>>>>>>>>>> As the first part of the error message is
>>>>>>>>>>>>
>>>>>>>>>>>> Database Error: SQL logic error:
>>>>>>>>>>>>
>>>>>>>>>>>> I confirmed that I do have sqlite installed.
>>>>>>>>>>>>
>>>>>>>>>>>> There is also a line in the error
>>>>>>>>>>>>
>>>>>>>>>>>> Could not read next file: /var/lib/pakfire/local/ipfire/3:=20
>>>>>>>>>>>> Cannot stat
>>>>>>>>>>>>
>>>>>>>>>>>> I checked and there is no pakfire directory under /var/lib/
>>>>>>>>>>>> Is there supposed to be? Maybe something is not working=20
>>>>>>>>>>>> right during the pakfire build on my system. The build is=20
>>>>>>>>>>>> working okay but maybe something that is required for the=20
>>>>>>>>>>>> execution is not being correctly setup.
>>>>>>>>>>>>
>>>>>>>>>>>> What files should the pakfire make install be creating?
>>>>>>>>>>>>
>>>>>>>>>>>> Regards,
>>>>>>>>>>>> Adolf
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Otherwise, you can add =E2=80=94-debug to the command line and =
it=20
>>>>>>>>>>>>> should write more detailed output into the journal.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Best,
>>>>>>>>>>>>> -Michael
>>>>>>>>>>>>>
>>>>>>>>>>>>>> On 1 Sep 2023, at 17:37, Adolf Belka=20
>>>>>>>>>>>>>> <adolf.belka(a)ipfire.org> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Michael,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On 01/09/2023 18:23, Michael Tremer wrote:
>>>>>>>>>>>>>>> Hello,
>>>>>>>>>>>>>>> Yes, I believe this is what it does on my system. So=20
>>>>>>>>>>>>>>> this is alright.
>>>>>>>>>>>>>>> Did you try the other commands?
>>>>>>>>>>>>>> Just tried them and got the following errors:-
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> pakfire-builder build beep/beep.nm
>>>>>>>>>>>>>> Database Error: SQL logic error: no such table: settings=20
>>>>>>>>>>>>>> in "SELECT val FROM settings WHERE key =3D ?"
>>>>>>>>>>>>>> Database Error: SQL logic error: no such table: settings=20
>>>>>>>>>>>>>> in "SELECT val FROM settings WHERE key =3D ?"
>>>>>>>>>>>>>> Package Database: testing 100%=C2=A0=C2=A0 | 1.6M 00:00
>>>>>>>>>>>>>> Package Database: bootstrap 100%=C2=A0=C2=A0 | 2.1M=C2=A0 00:00
>>>>>>>>>>>>>> Could not read next file:=20
>>>>>>>>>>>>>> /var/lib/pakfire/local/ipfire/3: Cannot stat
>>>>>>>>>>>>>> OSError: [Errno 25] Inappropriate ioctl for device
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The above exception was the direct cause of the following=20
>>>>>>>>>>>>>> exception:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Traceback (most recent call last):
>>>>>>>>>>>>>> =C2=A0=C2=A0 File "/usr/bin/pakfire-builder", line 437, in <mo=
dule>
>>>>>>>>>>>>>> =C2=A0=C2=A0=C2=A0=C2=A0 c()
>>>>>>>>>>>>>> =C2=A0=C2=A0 File "/usr/bin/pakfire-builder", line 212, in __c=
all__
>>>>>>>>>>>>>> =C2=A0=C2=A0=C2=A0=C2=A0 ret =3D args.func(args)
>>>>>>>>>>>>>> =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 ^=
^^^^^^^^^^^^^^
>>>>>>>>>>>>>> =C2=A0=C2=A0 File "/usr/bin/pakfire-builder", line 233, in _bu=
ild
>>>>>>>>>>>>>> =C2=A0=C2=A0=C2=A0=C2=A0 p =3D self.pakfire(ns)
>>>>>>>>>>>>>> =C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 ^^^^^^^^^^^^^=
^^^
>>>>>>>>>>>>>> =C2=A0=C2=A0 File "/usr/bin/pakfire-builder", line 194, in pak=
fire
>>>>>>>>>>>>>> =C2=A0=C2=A0=C2=A0=C2=A0 p =3D pakfire.Pakfire(arch=3Dns.arch,=
 conf=3Dc,=20
>>>>>>>>>>>>>> logger=3Dlogger.log)
>>>>>>>>>>>>>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>>>>>>>>>>>>>> SystemError: <class '_pakfire.Pakfire'> returned a result=20
>>>>>>>>>>>>>> with an exception set
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>> Adolf.
>>>>>>>>>>>>>>> -Michael
>>>>>>>>>>>>>>>> On 1 Sep 2023, at 17:21, Adolf Belka=20
>>>>>>>>>>>>>>>> <adolf.belka(a)ipfire.org> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi Michael,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On 01/09/2023 16:39, Michael Tremer wrote:
>>>>>>>>>>>>>>>>> Hello Adolf,
>>>>>>>>>>>>>>>>>> On 17 Aug 2023, at 12:20, Adolf Belka=20
>>>>>>>>>>>>>>>>>> <adolf.belka(a)ipfire.org> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hi Michael,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> When I built pakfire I just installed the programs=20
>>>>>>>>>>>>>>>>>> that were flagged up as missing during the configure=20
>>>>>>>>>>>>>>>>>> section.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I have now gone through the filenames you listed from=20
>>>>>>>>>>>>>>>>>> debian and eventually found what the equivalent=20
>>>>>>>>>>>>>>>>>> packages that contain those are called in Arch Linux=20
>>>>>>>>>>>>>>>>>> (most were easy but a few were convoluted to find).
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Everything was already installed on my laptop except=20
>>>>>>>>>>>>>>>>>> for liblzma-dev which is lzlib in Arch Linux.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Just to check, I installed lzlib and re-did the make=20
>>>>>>>>>>>>>>>>>> check and the same problems occurred.
>>>>>>>>>>>>>>>>> The configure script will complain if something is=20
>>>>>>>>>>>>>>>>> missing as none of the dependencies are optional.
>>>>>>>>>>>>>>>>> Apologies for taking so long to reply, but I should=20
>>>>>>>>>>>>>>>>> finally have a fix for the test suite:
>>>>>>>>>>>>>>>>> https://git.ipfire.org/?p=3Dpakfire.git;a=3Dcommitdiff;h=3D=
9eef0cb603bc51a5b34f042fced6e4d0bfa8d9d8=20
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> https://git.ipfire.org/?p=3Dpakfire.git;a=3Dcommitdiff;h=3D=
c54bafa7e74dbcb5b07bafe8fadf2ca830fd93d7=20
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Please just run =E2=80=9Cgit pull=E2=80=9D, then =E2=80=9Cm=
ake=E2=80=9D again and you=20
>>>>>>>>>>>>>>>>> should have a few tests pass. Not all of them are=20
>>>>>>>>>>>>>>>>> passing at the moment.
>>>>>>>>>>>>>>>> This time 20 passed out of 28
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> PASS: tests/libpakfire/main
>>>>>>>>>>>>>>>> PASS: tests/libpakfire/arch
>>>>>>>>>>>>>>>> PASS: tests/libpakfire/archive
>>>>>>>>>>>>>>>> FAIL: tests/libpakfire/build
>>>>>>>>>>>>>>>> FAIL: tests/libpakfire/cgroup
>>>>>>>>>>>>>>>> PASS: tests/libpakfire/compress
>>>>>>>>>>>>>>>> PASS: tests/libpakfire/config
>>>>>>>>>>>>>>>> PASS: tests/libpakfire/db
>>>>>>>>>>>>>>>> PASS: tests/libpakfire/dependencies
>>>>>>>>>>>>>>>> PASS: tests/libpakfire/digest
>>>>>>>>>>>>>>>> PASS: tests/libpakfire/downloader
>>>>>>>>>>>>>>>> PASS: tests/libpakfire/file
>>>>>>>>>>>>>>>> FAIL: tests/libpakfire/jail
>>>>>>>>>>>>>>>> PASS: tests/libpakfire/key
>>>>>>>>>>>>>>>> FAIL: tests/libpakfire/makefile
>>>>>>>>>>>>>>>> PASS: tests/libpakfire/package
>>>>>>>>>>>>>>>> PASS: tests/libpakfire/packager
>>>>>>>>>>>>>>>> PASS: tests/libpakfire/parser
>>>>>>>>>>>>>>>> PASS: tests/libpakfire/progressbar
>>>>>>>>>>>>>>>> PASS: tests/libpakfire/repo
>>>>>>>>>>>>>>>> PASS: tests/libpakfire/snapshot
>>>>>>>>>>>>>>>> PASS: tests/libpakfire/string
>>>>>>>>>>>>>>>> FAIL: tests/libpakfire/util
>>>>>>>>>>>>>>>> FAIL: tests/python/keys.py
>>>>>>>>>>>>>>>> FAIL: tests/python/jail.py
>>>>>>>>>>>>>>>> FAIL: tests/python/package.py
>>>>>>>>>>>>>>>> PASS: tests/python/progressbar.py
>>>>>>>>>>>>>>>> PASS: tests/python/test.py
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> If pakfire-builder =E2=80=94-help runs fine, you could chec=
k=20
>>>>>>>>>>>>>>>>> out the IPFire 3.x repository and run this:
>>>>>>>>>>>>>>>>> =C2=A0=C2=A0=C2=A0 git clone=20
>>>>>>>>>>>>>>>>> https://git.ipfire.org/pub/git/ipfire-3.x.git
>>>>>>>>>>>>>>>>> =C2=A0=C2=A0=C2=A0 cd ipfire-3.x
>>>>>>>>>>>>>>>>> =C2=A0=C2=A0=C2=A0 pakfire-builder build beep/beep.nm
>>>>>>>>>>>>>>>>> Please let me know how that is going.
>>>>>>>>>>>>>>>>> -Michael
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Adolf.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On 17/08/2023 12:18, Adolf Belka wrote:
>>>>>>>>>>>>>>>>>>> Hi Michael,
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> I did a clean new install and took the log files=20
>>>>>>>>>>>>>>>>>>> from the tests/libpakfire and tests/python directories.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> The only one that passed this time was the test.py=20
>>>>>>>>>>>>>>>>>>> from the tests/python directory. All others failed.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> I have archived them into an xz file that is attached.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>>>>> Adolf.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On 17/08/2023 11:38, Michael Tremer wrote:
>>>>>>>>>>>>>>>>>>>> Hello Adolf,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Thank you very much for the quick feedback.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> After running =E2=80=9Cmake check=E2=80=9D, could you em=
ail me the=20
>>>>>>>>>>>>>>>>>>>> =E2=80=9C*.log=E2=80=9D files in the test/libpakfire dir=
ectory?=20
>>>>>>>>>>>>>>>>>>>> Let=E2=80=99s see what is going wrong there. For me a fe=
w=20
>>>>>>>>>>>>>>>>>>>> tests fail, but a few should run just fine.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Best,
>>>>>>>>>>>>>>>>>>>> -Michael
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On 17 Aug 2023, at 10:36, Adolf Belka=20
>>>>>>>>>>>>>>>>>>>>> <adolf.belka(a)ipfire.org> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> I am using Arch Linux.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> I already do some building of my bacula client=20
>>>>>>>>>>>>>>>>>>>>> package on my laptop so it has the normal build=20
>>>>>>>>>>>>>>>>>>>>> tools installed.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> To get autogen.sh to run I had to install intltool
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> To get configure to run I had to additionally=20
>>>>>>>>>>>>>>>>>>>>> install.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> asciidoc, python-py-cpuinfo, python-pykerberos,=20
>>>>>>>>>>>>>>>>>>>>> python-systemd, python-tornado and libsolv
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> After that configure ran without any problems, as=20
>>>>>>>>>>>>>>>>>>>>> did make.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Although make check is in brackets I gave it a go=20
>>>>>>>>>>>>>>>>>>>>> but got 1 pass and 26 fails. The only pass was for=20
>>>>>>>>>>>>>>>>>>>>> test.py
>>>>>>>>>>>>>>>>>>>>> I ran the make check a second time and then two=20
>>>>>>>>>>>>>>>>>>>>> passed - test.py and progressbar.py
>>>>>>>>>>>>>>>>>>>>> Further running of make check didn't change anything.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> make install went fine and after that I can run=20
>>>>>>>>>>>>>>>>>>>>> pakfire-builder --help and get the help screen.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>>>>>>> Adolf.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On 16/08/2023 17:29, Michael Tremer wrote:
>>>>>>>>>>>>>>>>>>>>>> Hello everyone,
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> For our meet-up that is starting soon, I would=20
>>>>>>>>>>>>>>>>>>>>>> like everyone to have a working installation of=20
>>>>>>>>>>>>>>>>>>>>>> Pakfire - our new build system.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> I am not sure yet in what way we are going to use=20
>>>>>>>>>>>>>>>>>>>>>> it, but generally there will be an intro for=20
>>>>>>>>>>>>>>>>>>>>>> everyone who hasn=E2=80=99t had one yet, and maybe we =

>>>>>>>>>>>>>>>>>>>>>> even get a chance to update a few packages of the=20
>>>>>>>>>>>>>>>>>>>>>> distribution or something=E2=80=A6
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Because I don=E2=80=99t know which distributions you a=
re=20
>>>>>>>>>>>>>>>>>>>>>> using, and because we don=E2=80=99t have any packages =
for=20
>>>>>>>>>>>>>>>>>>>>>> any major distribution just yet, I would like to=20
>>>>>>>>>>>>>>>>>>>>>> ask everyone to install Pakfire manually on their=20
>>>>>>>>>>>>>>>>>>>>>> systems in advance of our meet-up, so that we can=20
>>>>>>>>>>>>>>>>>>>>>> start straight away. We should also use the time=20
>>>>>>>>>>>>>>>>>>>>>> to find any issues that might occur on other=20
>>>>>>>>>>>>>>>>>>>>>> distributions than Debian which is what I have=20
>>>>>>>>>>>>>>>>>>>>>> been using.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Please find the source here:=20
>>>>>>>>>>>>>>>>>>>>>> https://git.ipfire.org/?p=3Dpakfire.git;a=3Dsummary
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> On Debian, I have to install these packages as=20
>>>>>>>>>>>>>>>>>>>>>> dependencies (yes it is quite a lot):
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> * asciidoc, autoconf, automake, bison,=20
>>>>>>>>>>>>>>>>>>>>>> build-essential, flex, intltool, libarchive-dev,=20
>>>>>>>>>>>>>>>>>>>>>> libcap-dev, libcurl4-openssl-dev, libelf-dev,=20
>>>>>>>>>>>>>>>>>>>>>> libgpgme-dev, libjson-c-dev, liblzma-dev,=20
>>>>>>>>>>>>>>>>>>>>>> libmagic-dev, libmount-dev, libnl-3-dev,=20
>>>>>>>>>>>>>>>>>>>>>> libnl-route-3-dev, libpcre2-dev, libpython3-dev,=20
>>>>>>>>>>>>>>>>>>>>>> libseccomp-dev, libsolv-dev, libsqlite3-dev,=20
>>>>>>>>>>>>>>>>>>>>>> libssl-dev, libsystemd-dev, libtool, libzstd-dev,=20
>>>>>>>>>>>>>>>>>>>>>> pkg-config, python3-cpuinfo, python3-kerberos,=20
>>>>>>>>>>>>>>>>>>>>>> python3-tornado, python3-psutil,=20
>>>>>>>>>>>>>>>>>>>>>> python3-setproctitle, uuid-dev
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> I have no idea what the package names will be for=20
>>>>>>>>>>>>>>>>>>>>>> your distribution, but I am sure you will all=20
>>>>>>>>>>>>>>>>>>>>>> figure it out :)
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> You can use the usual three-clause build process=20
>>>>>>>>>>>>>>>>>>>>>> after generating the configure script:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> =C2=A0=C2=A0=C2=A0=C2=A0 ./autogen.sh
>>>>>>>>>>>>>>>>>>>>>> =C2=A0=C2=A0=C2=A0=C2=A0 ./configure =E2=80=94-prefix=
=3D/usr =E2=80=94-sysconfdir=3D/etc=20
>>>>>>>>>>>>>>>>>>>>>> =E2=80=94-enable-debug
>>>>>>>>>>>>>>>>>>>>>> =C2=A0=C2=A0=C2=A0=C2=A0 make
>>>>>>>>>>>>>>>>>>>>>> =C2=A0=C2=A0=C2=A0=C2=A0 (make check)
>>>>>>>>>>>>>>>>>>>>>> =C2=A0=C2=A0=C2=A0=C2=A0 make install
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> After that, you should be able to run=20
>>>>>>>>>>>>>>>>>>>>>> pakfire-builder =E2=80=94-help.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Please let me know if that works for you up to=20
>>>>>>>>>>>>>>>>>>>>>> this point and please file a bug if changes are=20
>>>>>>>>>>>>>>>>>>>>>> required to make Pakfire work on your distribution.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> All the best,
>>>>>>>>>>>>>>>>>>>>>> -Michael
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> --=20
>>>>>>>>>>>>>>>>>>>>> Sent from my laptop
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> --=20
>>>>>>>>>>>>>>>>>> Sent from my laptop
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --=20
>>>>>>>>>>>>>>>> Sent from my laptop
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --=20
>>>>>>>>>>>>>> Sent from my laptop
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --=20
>>>>>>>>>>> Sent from my laptop
>>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --=20
>>>>>>>>> Sent from my laptop
>>>>>>>
>>>>>>> --=20
>>>>>>> Sent from my laptop
>>>>>
>>>>> --=20
>>>>> Sent from my laptop
>>>
>>> --=20
>>> Sent from my laptop
>>
>>
>

--=20
Sent from my laptop


--===============5301412084159751720==--